February 2016 Archives by author
Starting: Mon Feb 1 00:13:33 CET 2016
Ending: Mon Feb 29 23:55:19 CET 2016
Messages: 2832
- [U-Boot] Converting serial_s3c24x0.c to driver model
David Müller (ELSOFT AG)
- [U-Boot] CONFIG_MODEM_SUPPORT / CONFIG_HWFLOW still in use?
David Müller (ELSOFT AG)
- [U-Boot] [PATCH 1/4] arm: make sure board_init_r() is being called using the right mode (ARM / THUMB)
David Müller (ELSOFT AG)
- [U-Boot] Samsung I2C driver
David Müller (ELSOFT AG)
- [U-Boot] 64-bit x86 U-Boot?
Albert ARIBAUD
- [U-Boot] [PATCH] OMAP3: omap3_logic: Remove YAFFS support.
Albert ARIBAUD
- [U-Boot] [PATCH v3 0/7] fdt: Replace u-boot-dtb.bin with u-boot.bin
Albert ARIBAUD
- [U-Boot] [PATCH v3]net: Wrong Initialization in davinci-emac driver
Albert ARIBAUD
- [U-Boot] [PATCH v2 0/1] Fix patman Series-notes handling for buildman
Albert ARIBAUD
- [U-Boot] [PATCH v2] patman: fix series-notes handling for buildman
Albert ARIBAUD
- [U-Boot] [PATCH] patman: fix series-notes handling for buildman
Albert ARIBAUD
- [U-Boot] 64-bit x86 U-Boot?
Albert ARIBAUD
- [U-Boot] [PATCH] spl: define BOOT_DEVICE_USB
Albert ARIBAUD
- [U-Boot] [PATCH 3/5] kbuild: use $(call cmd, ) rather than $(call if_changed, ) where possible
Albert ARIBAUD
- [U-Boot] [PATCH 3/5] kbuild: use $(call cmd, ) rather than $(call if_changed, ) where possible
Albert ARIBAUD
- [U-Boot] [PATCHv2] common/memsize.c: Simplify RAM size detection
Albert ARIBAUD
- [U-Boot] [PATCH 2/3] common: env_flags: include common.h even for HOST_CC
Albert ARIBAUD
- [U-Boot] Patman use (was: [PATCHv2] common/memsize.c: Simplify RAM size detection)
Albert ARIBAUD
- [U-Boot] [PATCH 2/3] common: env_flags: include common.h even for HOST_CC
Albert ARIBAUD
- [U-Boot] [PATCH] net: phy: atheros: Fix problem with phy_reset() clearing BMCR
Stefan Agner
- [U-Boot] Using old Config Style
Mario Albrecht
- [U-Boot] [PATCH] serial: pl01x: Add support for devices with the rate pre-configured.
Eric Anholt
- [U-Boot] [PATCH V2 2/4] common: env_mmc: support loading env from different cards
Stefano Babic
- [U-Boot] [PATCH] tools: mxsboot: Use more portable cpu_to_le32()
Stefano Babic
- [U-Boot] [PATCH v3 1/2] mx6: soc: Add ENET2 mac address support
Stefano Babic
- [U-Boot] [PATCH v3 2/2] imx: mx6sxsabreauto: Add support for mx6sx SABREAUTO board
Stefano Babic
- [U-Boot] [PATCH] mx6slevk: Fix the reset delay for the the LAN8720 PHY
Stefano Babic
- [U-Boot] [PATCH] tqma6_wru4: Fix the reset delay for the the LAN8720 PHY
Stefano Babic
- [U-Boot] [PATCH V2] imx: MX6DQ{P}/DL:SABRESD Fix bmode eMMC failure
Stefano Babic
- [U-Boot] [PATCH] mx6slevk: Remove CONFIG_ETHPRIME option
Stefano Babic
- [U-Boot] [PATCH 1/2] imx: mx6sx: Fix issue in LCDIF clock enablement
Stefano Babic
- [U-Boot] [PATCH 2/2] imx: mx6ul/sx: Fix issue in LCDIF clock dividers calculation
Stefano Babic
- [U-Boot] [PATCH] imx: mx6sxsabresd: Add MCIMX28LCD display support
Stefano Babic
- [U-Boot] [PATCHv4 0/9] Migrate NXP/Freescale Vybrid based boards to support pure DT
Stefano Babic
- [U-Boot] [PATCH V2 2/4] common: env_mmc: support loading env from different cards
Stefano Babic
- [U-Boot] [PATCH] imx: Refactoring CAAM Job Ring structure and Secure Memory for imx7
Stefano Babic
- [U-Boot] [PULL] Please pull u-boot-imx
Stefano Babic
- [U-Boot] [PATCH 23/26] spl: Add an option to load a FIT containing U-Boot
Stefano Babic
- [U-Boot] [PATCH 2/4] mxsboot: remove unused include
Stefano Babic
- [U-Boot] [PATCH] mx6ul_14x14_evk: Select CONFIG_FSL_QSPI
Stefano Babic
- [U-Boot] [PATCH] mx7dsabresd: Use Adrian's NXP email address
Stefano Babic
- [U-Boot] [PATCH] mx7dsabresd: Make 'ums' command functional
Stefano Babic
- [U-Boot] [PATCH 1/2] arm: mx6: Add UART8 base address for i.MX6UL
Stefano Babic
- [U-Boot] [PATCH 2/2] arm: mx6: Add CCV xPress board support
Stefano Babic
- [U-Boot] [PATCH] imx: Refactoring CAAM Job Ring structure and Secure Memory for imx7
Stefano Babic
- [U-Boot] [PATCH V2 1/2] pinctrl: imx: Introduce pinctrl driver for i.MX6
Stefano Babic
- [U-Boot] [PATCH 1/2] imx: mx6: Implement mmc_get_env_part
Stefano Babic
- [U-Boot] [PATCH v2 1/3] imx: mx6quq7: fix USDHC4 declaration
Stefano Babic
- [U-Boot] [PATCH V2 00/11] imx: introduce rdc and boot auxiliary core
Stefano Babic
- [U-Boot] ls1021aqds_nor_lpuart_ boards
Stefano Babic
- [U-Boot] ls1021aqds_nor_lpuart_ boards
Stefano Babic
- [U-Boot] [PATCH 23/26] spl: Add an option to load a FIT containing U-Boot
Stefano Babic
- [U-Boot] Problem with mounting a jffs2 partition on flash.
Bakhvalov, Denis (Nokia - PL/Wroclaw)
- [U-Boot] Problem with mounting a jffs2 partition on flash.
Bakhvalov, Denis (Nokia - PL/Wroclaw)
- [U-Boot] Problem with mounting a jffs2 partition on flash.
Bakhvalov, Denis (Nokia - PL/Wroclaw)
- [U-Boot] Problem with mounting a jffs2 partition on flash.
Bakhvalov, Denis (Nokia - PL/Wroclaw)
- [U-Boot] Problem with mounting a jffs2 partition on flash.
Bakhvalov, Denis (Nokia - PL/Wroclaw)
- [U-Boot] Problem with mounting a jffs2 partition on flash.
Bakhvalov, Denis (Nokia - PL/Wroclaw)
- [U-Boot] [PATCH] arm: socfpga: Add missing CONFIG_BUILD_TARGET
Bakhvalov, Denis (Nokia - PL/Wroclaw)
- [U-Boot] [PATCH] arm: socfpga: Add missing CONFIG_BUILD_TARGET
Bakhvalov, Denis (Nokia - PL/Wroclaw)
- [U-Boot] Problem with mounting a jffs2 partition on flash.
Bakhvalov, Denis (Nokia - PL/Wroclaw)
- [U-Boot] Problem with mounting a jffs2 partition on flash.
Bakhvalov, Denis (Nokia - PL/Wroclaw)
- [U-Boot] Problem with mounting a jffs2 partition on flash.
Bakhvalov, Denis (Nokia - PL/Wroclaw)
- [U-Boot] Problem with mounting a jffs2 partition on flash.
Bakhvalov, Denis (Nokia - PL/Wroclaw)
- [U-Boot] Problem with mounting a jffs2 partition on flash.
Bakhvalov, Denis (Nokia - PL/Wroclaw)
- [U-Boot] Problem with mounting a jffs2 partition on flash.
Bakhvalov, Denis (Nokia - PL/Wroclaw)
- [U-Boot] Problem with attaching UBI partition
Bakhvalov, Denis (Nokia - PL/Wroclaw)
- [U-Boot] Problem with attaching UBI partition
Bakhvalov, Denis (Nokia - PL/Wroclaw)
- [U-Boot] Problem with attaching UBI partition
Bakhvalov, Denis (Nokia - PL/Wroclaw)
- [U-Boot] Problem with attaching UBI partition
Bakhvalov, Denis (Nokia - PL/Wroclaw)
- [U-Boot] [PATCH v3 15/15] SECURE_BOOT: Enable IE (Key extention) Feature in Ls2085a & LS2088a
Aneesh Bansal
- [U-Boot] [PATCH v3] Enable snooping on transactions from CAAM block
Aneesh Bansal
- [U-Boot] [PATCH v4] armv7: ls102xa: Enable snooping on transactions from CAAM
Aneesh Bansal
- [U-Boot] [PATCH 2/3][v3] Data types defined for 64 bit physical address
Aneesh Bansal
- [U-Boot] [PATCH] drivers/crypto/fsl: correct error checking in run_descriptor
Aneesh Bansal
- [U-Boot] [PATCH 1/2] drivers/crypto/fsl: add constructs for protocol descriptors
Aneesh Bansal
- [U-Boot] [PATCH 2/2] drivers/crypto/fsl: define structures for PDB
Aneesh Bansal
- [U-Boot] [PATCH 1/2] board: ls1043ardb: move sec_init to board_init
Aneesh Bansal
- [U-Boot] [PATCH 2/2] ls1043ardb: PPA: add PPA validation in case of secure boot
Aneesh Bansal
- [U-Boot] [PATCH] OMAP3LOGIC: Update maintainer
Peter Barada
- [U-Boot] u-boot legacy/FIT/FIT+signature compatability
Troy Benjegerdes
- [U-Boot] [PATCH 1/2] atmel_nand_ecc: update pmecc registers according to sama5d2 chip
Andreas Bießmann
- [U-Boot] [PATCH v2] board: atmel: sama5d2_xplained: add SPL support
Andreas Bießmann
- [U-Boot] [PATCH 2/2] atmel_nand: Add 32 bit ecc support for sama5d2 chip
Andreas Bießmann
- [U-Boot] [RESEND PATCH v3 2/5] ARM: at91: clock: add a new file to handle clock
Andreas Bießmann
- [U-Boot] [U-Boot, 1/2] atmel_nand_ecc: update pmecc registers according to sama5d2 chip
Andreas Bießmann
- [U-Boot] [U-Boot, 2/2] atmel_nand: Add 32 bit ecc support for sama5d2 chip
Andreas Bießmann
- [U-Boot] [U-Boot, v3, 1/3] arm: at91/spl: mpddrc: add struct atmel_mpddrc_config
Andreas Bießmann
- [U-Boot] [U-Boot, v3, 2/3] arm: at91/spl: mpddrc: add mpddrc DDR3-SDRAM initialization
Andreas Bießmann
- [U-Boot] [U-Boot, v3, 3/3] arm: at91/spl: mpddrc: use IP version to check configuration
Andreas Bießmann
- [U-Boot] [U-Boot, v2] board: atmel: sama5d2_xplained: add SPL support
Andreas Bießmann
- [U-Boot] [PULL] u-boot-atmel/master -> u-boot/master
Andreas Bießmann
- [U-Boot] [PATCH 0/4] Some things that bug me
Andreas Bießmann
- [U-Boot] [PATCH 1/4] tools: -Wno-deprecated-declarations for OpenSSL on darwin
Andreas Bießmann
- [U-Boot] [PATCH 2/4] mxsboot: remove unused include
Andreas Bießmann
- [U-Boot] [PATCH 3/4] samsung: fix mkorigenspl for darwin
Andreas Bießmann
- [U-Boot] [PATCH 4/4] pci_rom: fix may be used uninitialized warning
Andreas Bießmann
- [U-Boot] [U-Boot, v2] ARM: at91: sama5d2: configure the L2 cache memory
Andreas Bießmann
- [U-Boot] [U-Boot, v2] ARM: at91: sama5d2: configure the L2 cache memory
Andreas Bießmann
- [U-Boot] siemens,at91: enable features for smartweb
Andreas Bießmann
- [U-Boot] arm: at91: Add support for DENX MA5D4 SoM and EVK
Andreas Bießmann
- [U-Boot] [U-Boot, v3, 1/4] ARM: at91: clock: add UTMI PLL enable/disable function
Andreas Bießmann
- [U-Boot] [U-Boot, v3, 2/4] ARM: at91: armv7: clean up UTMI PLL handle code
Andreas Bießmann
- [U-Boot] [U-Boot, v3, 3/4] drivers: usb: atmel: clean up the UTMI PLL code
Andreas Bießmann
- [U-Boot] [U-Boot, v3, 4/4] board: atmel: siemens: clean up UTMI PLL code
Andreas Bießmann
- [U-Boot] [U-Boot, v3, 1/3] ARM: at91: clock: add PMC_PLLICPR init function
Andreas Bießmann
- [U-Boot] [U-Boot, v3, 2/3] ARM: at91: clean up the PMC_PLLICPR init code
Andreas Bießmann
- [U-Boot] [U-Boot, v3, 3/3] board: atmel: clean up the PMC_PLLICPR init code
Andreas Bießmann
- [U-Boot] [U-Boot, v4, 2/5] ARM: at91: clock: add a new file to handle clock
Andreas Bießmann
- [U-Boot] [U-Boot, v4, 1/5] ARM: at91: asm/at91_pmc.h: fix trival register offset
Andreas Bießmann
- [U-Boot] [U-Boot, v4, 2/5] ARM: at91: clock: add a new file to handle clock
Andreas Bießmann
- [U-Boot] [U-Boot, v4, 3/5] ARM: cpu: at91: clean up peripheral clock code
Andreas Bießmann
- [U-Boot] [U-Boot, v4, 4/5] board: atmel: clean up peripheral clock code
Andreas Bießmann
- [U-Boot] [U-Boot, v4, 5/5] drivers: at91: clean up peripheral clock code
Andreas Bießmann
- [U-Boot] [U-Boot, v3, 1/4] ARM: at91: clock: add UTMI PLL enable/disable function
Andreas Bießmann
- [U-Boot] [U-Boot, v3, 2/4] ARM: at91: armv7: clean up UTMI PLL handle code
Andreas Bießmann
- [U-Boot] [U-Boot, v3, 3/4] drivers: usb: atmel: clean up the UTMI PLL code
Andreas Bießmann
- [U-Boot] [U-Boot, v3, 4/4] board: atmel: siemens: clean up UTMI PLL code
Andreas Bießmann
- [U-Boot] [U-Boot, v4, 1/3] ARM: at91: clock: add PLLB enable/disable functions
Andreas Bießmann
- [U-Boot] [U-Boot, v4, 2/3] drivers: usb: ohci-at91: clean up the PLLB code
Andreas Bießmann
- [U-Boot] [U-Boot, v4, 3/3] board: atmel: siemens: clean up PLLB code
Andreas Bießmann
- [U-Boot] [U-Boot, v3, 1/3] ARM: at91: clock: add PMC_PLLICPR init function
Andreas Bießmann
- [U-Boot] [U-Boot, v3, 2/3] ARM: at91: clean up the PMC_PLLICPR init code
Andreas Bießmann
- [U-Boot] [U-Boot, v3, 3/3] board: atmel: clean up the PMC_PLLICPR init code
Andreas Bießmann
- [U-Boot] siemens,at91: enable features for smartweb
Andreas Bießmann
- [U-Boot] arm: at91: Add support for DENX MA5D4 SoM and EVK
Andreas Bießmann
- [U-Boot] [U-Boot, v2] ARM: at91: sama5d2: configure the L2 cache memory
Andreas Bießmann
- [U-Boot] [U-Boot,v3] ARM: Add Support for the VInCo platform
Andreas Bießmann
- [U-Boot] [PULL] u-boot-atmel/master -> u-boot/master
Andreas Bießmann
- [U-Boot] [U-Boot,v3] ARM: Add Support for the VInCo platform
Andreas Bießmann
- [U-Boot] [PULL] u-boot-atmel/master -> u-boot/master
Andreas Bießmann
- [U-Boot] [PULL v2] u-boot-atmel/master -> u-boot/master
Andreas Bießmann
- [U-Boot] Olimex-A20-EVB ethernet stops working with latest U-boot, works with tag v2016.01
Ing. Damiano Bolla
- [U-Boot] Olimex-A20-EVB ethernet stops working with latest U-boot, works with tag v2016.01
Ing. Damiano Bolla
- [U-Boot] [PATCH] imx: mx6quq7: add sd card detection
Boris Brezillon
- [U-Boot] [PATCH v2 1/3] imx: mx6quq7: fix USDHC4 declaration
Boris Brezillon
- [U-Boot] Please pull ARC changes
Alexey Brodkin
- [U-Boot] [PATCH] arc: get rid of running_on_hw
Alexey Brodkin
- [U-Boot] Newbie SPL question for socfpga_sockit
George Broz
- [U-Boot] [PATCH] ns16550: Clean up & unify register accessors
Paul Burton
- [U-Boot] [RFC PATCH] ns16550: Clean up & unify register accessors
Paul Burton
- [U-Boot] [U-Boot,v3] ARM: Add Support for the VInCo platform
Gregory CLEMENT
- [U-Boot] [PATCH 3/5] kbuild: use $(call cmd, ) rather than $(call if_changed, ) where possible
Ian Campbell
- [U-Boot] [PATCH] imx: Refactoring CAAM Job Ring structure and Secure Memory for imx7
Ulises Cardenas
- [U-Boot] [PATCH] drivers/crypto/fsl : Allocate output ring with size aligned to CACHELNE SIZE
Ulises Cardenas
- [U-Boot] [PATCH] imx: imx7 Support for Manufacturing Protection
Ulises Cardenas
- [U-Boot] [PATCH v2] imx: imx7 Support for Manufacturing Protection
Ulises Cardenas
- [U-Boot] [PATCH v3] imx: imx7 Support for Manufacturing Protection
Ulises Cardenas
- [U-Boot] [PATCH] Fix variable documented in README.distro for PXE address.
Vagrant Cascadian
- [U-Boot] [PATCH] RFC/BUG Workaround regression with "mkimage -T rksd".
Vagrant Cascadian
- [U-Boot] [PATCH] Makefile: remove BUILD_TAG from KBUILD_CFLAGS
James Chargin
- [U-Boot] [PATCH] serial: Move carriage return before line feed for some serial drivers
James Chargin
- [U-Boot] [PATCH v4 5/6] rockchip: kylin: Enable boot with android boot image
Jeffy Chen
- [U-Boot] [PATCH] fastboot: sparse: fix chunk write offset calculation
Jeffy Chen
- [U-Boot] [PATCH] fastboot: sparse: fix sparse blocks calculation
Jeffy Chen
- [U-Boot] [PATCH] rockchip: rk3036: change ddr frequency to 400M
Jeffy Chen
- [U-Boot] how does board_init_f() -> board_init_r?
Peter Chen
- [U-Boot] [PATCH] nios2: set up the debug UART early
Thomas Chou
- [U-Boot] [PULL] Please pull u-boot-nios/master
Thomas Chou
- [U-Boot] [PATCH] net: fix m88e1111s PHY auto negotiation timeout
Thomas Chou
- [U-Boot] [PATCH] net: fix m88e1111s PHY auto negotiation timeout
Thomas Chou
- [U-Boot] [PATCH v2 00/25] exynos: video: Convert exynos LCD driver to use driver model
Jaehoon Chung
- [U-Boot] [PATCH] Gracefully handle 64-bit Load Address and Entry Point Address mkimage parameters
William Cohen
- [U-Boot] [PATCH] Gracefully handle 64-bit Load Address and Entry Point Address mkimage parameters
William Cohen
- [U-Boot] [PATCH] Gracefully handle 64-bit signed-extended 32-bit Load addresses
William Cohen
- [U-Boot] [PATCH] gunzip: remove avail_in recalculation
Kees Cook
- [U-Boot] [PATCH] imx: mx6quq7: add sd card detection
Julien Corjon
- [U-Boot] [PATCH v2 1/3] imx: mx6quq7: fix USDHC4 declaration
Julien Corjon
- [U-Boot] [PATCH v2 2/3] imx: mx6quq7: specify max_bus_witdh directly in usdhc_cfg
Julien Corjon
- [U-Boot] [PATCH v2 3/3] imx: mx6quq7: add sd card detection
Julien Corjon
- [U-Boot] NAND bad block checking policy
Guilherme de Oliveira Costa
- [U-Boot] Compilation errors after enabling the flash support
Srinivasa_Nagalla at DELL.com
- [U-Boot] [PATCHv4 0/9] Migrate NXP/Freescale Vybrid based boards to support pure DT
Bhuvanchandra DV
- [U-Boot] ls1021aqds_nor_lpuart_ boards
Bhuvanchandra DV
- [U-Boot] [PATCH] colibri-vf: Disable pull-up configuration in GPIO pin mux
Bhuvanchandra DV
- [U-Boot] [PATCH v2 0/2] Make usb device-tree fixup independent of USB controller
Sriram Dash
- [U-Boot] [PATCH v2 1/2] board:freescale:common: Move device-tree fixup framework to common file
Sriram Dash
- [U-Boot] [PATCH v2 2/2] board:freescale:usb: Add device-tree fixup support for xhci controller
Sriram Dash
- [U-Boot] [PATCH v2 1/2] board:freescale:common: Move device-tree fixup framework to common file
Sriram Dash
- [U-Boot] [PATCH v2 2/2] board:freescale:usb: Add device-tree fixup support for xhci controller
Sriram Dash
- [U-Boot] [PATCH] ARM: DRA7xx: Enable NFS boot command
Andrew F. Davis
- [U-Boot] do i have any chance of booting a vxworks 5.5.2 image with u-boot?
Robert P. J. Day
- [U-Boot] do i have any chance of booting a vxworks 5.5.2 image with u-boot?
Robert P. J. Day
- [U-Boot] looking to get u-boot running on (old) MPC8280-based Mitel IP 3300 AX controller
Robert P. J. Day
- [U-Boot] oddity(?) in selection of FCC Ethernet index in 2014 version of u-boot
Robert P. J. Day
- [U-Boot] [GIT PULL] Xilinx changes
Ricardo Ribalda Delgado
- [U-Boot] [PATCH] ppc: xilinx-ppc405-generic
Ricardo Ribalda Delgado
- [U-Boot] CONFIG_MODEM_SUPPORT / CONFIG_HWFLOW still in use?
Wolfgang Denk
- [U-Boot] Problem with mounting a jffs2 partition on flash.
Wolfgang Denk
- [U-Boot] Problem with mounting a jffs2 partition on flash.
Wolfgang Denk
- [U-Boot] exclude email by patman
Wolfgang Denk
- [U-Boot] [PATCH] Revert "common/memsize.c: Simplify RAM size detection"
Wolfgang Denk
- [U-Boot] [PATCH] arm: at91: Add support for DENX MA5D4 SoM and EVK
Wolfgang Denk
- [U-Boot] [PATCH] arm: socfpga: Remove bashisms from qts filter
Wolfgang Denk
- [U-Boot] [PATCH] arm: socfpga: Remove bashisms from qts filter
Wolfgang Denk
- [U-Boot] [PATCH] Gracefully handle 64-bit Load Address and Entry Point Address mkimage parameters
Wolfgang Denk
- [U-Boot] [ANN] U-Boot v2016.01-rc2 released
Wolfgang Denk
- [U-Boot] U-Boot loading kernel from mmc question
Wolfgang Denk
- [U-Boot] [RFC PATCH v5 1/4] common: Convert ulong to phys_addr_t for image addresses
Wolfgang Denk
- [U-Boot] [PATCH] mx6slevk: Fix the reset delay for the the LAN8720 PHY
Fabio Estevam
- [U-Boot] [PATCH] tqma6_wru4: Fix the reset delay for the the LAN8720 PHY
Fabio Estevam
- [U-Boot] [PATCH] mx6slevk: Remove CONFIG_ETHPRIME option
Fabio Estevam
- [U-Boot] Issue with USB mass storage (thumb drives)
Fabio Estevam
- [U-Boot] Issue with USB mass storage (thumb drives)
Fabio Estevam
- [U-Boot] [PATCH] imx: imx7 Support for Manufacturing Protection
Fabio Estevam
- [U-Boot] Moving custom board imx6q from u-boot-imx 2014.04 to 2015.04 lead to freeze
Fabio Estevam
- [U-Boot] Moving custom board imx6q from u-boot-imx 2014.04 to 2015.04 lead to freeze
Fabio Estevam
- [U-Boot] [PATCH] mx7dsabresd: Make 'ums' command functional
Fabio Estevam
- [U-Boot] [PATCH] mx7dsabresd: Use Adrian's NXP email address
Fabio Estevam
- [U-Boot] [PATCH] mx6ul_14x14_evk: Select CONFIG_FSL_QSPI
Fabio Estevam
- [U-Boot] Issue with USB mass storage (thumb drives)
Fabio Estevam
- [U-Boot] [PATCH] net: phy: atheros: Fix problem with phy_reset() clearing BMCR
Fabio Estevam
- [U-Boot] [PATCH] MAINTAINERS: Update Peng Fan's email address
Fabio Estevam
- [U-Boot] ls1021aqds_nor_lpuart_ boards
Fabio Estevam
- [U-Boot] [PATCH] mx6qarm2: Update maintainer's emails
Fabio Estevam
- [U-Boot] Issue with USB mass storage (thumb drives)
Fabio Estevam
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Fabio Estevam
- [U-Boot] [PATCH 1/2] mx7_common: Remove unexisting options
Fabio Estevam
- [U-Boot] [PATCH 2/2] mx7dsabresd: Define serial port locally
Fabio Estevam
- [U-Boot] [PATCH] mx53ard: Move to booting zImage
Fabio Estevam
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Fabio Estevam
- [U-Boot] [PATCH 1/2] mx7_common: Put early/late init configs into board file
Fabio Estevam
- [U-Boot] [PATCH 2/2] warp7: Add initial support
Fabio Estevam
- [U-Boot] [PATCH] mx7: Distinguish between dual and solo versions
Fabio Estevam
- [U-Boot] [PATCH 2/2] warp7: Add initial support
Fabio Estevam
- [U-Boot] [PATCH v2 1/2] mx7_common: Put early/late init configs into board file
Fabio Estevam
- [U-Boot] [PATCH v2 2/2] warp7: Add initial support
Fabio Estevam
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Fabio Estevam
- [U-Boot] [PATCH] fdt: introudce fdt_get_child_count
Peng Fan
- [U-Boot] [PATCH V2] fdt: introduce fdtdec_get_child_count
Peng Fan
- [U-Boot] [PATCH 1/2] pinctrl: imx: Introduce pinctrl driver for i.MX6
Peng Fan
- [U-Boot] [PATCH 2/2] pinctrl: imx: Support i.MX7D
Peng Fan
- [U-Boot] [PATCH 1/2] pinctrl: imx: Introduce pinctrl driver for i.MX6
Peng Fan
- [U-Boot] [PATCH 2/2] pinctrl: imx: Support i.MX7D
Peng Fan
- [U-Boot] [PATCH V2 2/4] common: env_mmc: support loading env from different cards
Peng Fan
- [U-Boot] [PATCH V2 1/2] pinctrl: imx: Introduce pinctrl driver for i.MX6
Peng Fan
- [U-Boot] [PATCH V2 2/2] pinctrl: imx: Support i.MX7D
Peng Fan
- [U-Boot] [PATCH V2 1/2] pinctrl: imx: Introduce pinctrl driver for i.MX6
Peng Fan
- [U-Boot] [PATCH V2 1/2] pinctrl: imx: Introduce pinctrl driver for i.MX6
Peng Fan
- [U-Boot] [PATCH V2 1/2] pinctrl: imx: Introduce pinctrl driver for i.MX6
Peng Fan
- [U-Boot] [PATCH] mx6ul_14x14_evk: Select CONFIG_FSL_QSPI
Peng Fan
- [U-Boot] [PATCH] MAINTAINERS: Update Peng Fan's email address
Peng Fan
- [U-Boot] Olimex-A20-EVB ethernet stops working with latest U-boot, works with tag v2016.01
Peng Fan
- [U-Boot] [PATCH] mx7: Distinguish between dual and solo versions
Peng Fan
- [U-Boot] [PATCH 1/2] mx7_common: Put early/late init configs into board file
Peng Fan
- [U-Boot] [PATCH 2/2] warp7: Add initial support
Peng Fan
- [U-Boot] Problems loading Linux in A33
Antonio Fernandez
- [U-Boot] Moving custom board imx6q from u-boot-imx 2014.04 to 2015.04 lead to freeze
Roberto Fichera
- [U-Boot] Moving custom board imx6q from u-boot-imx 2014.04 to 2015.04 lead to freeze
Roberto Fichera
- [U-Boot] Moving custom board imx6q from u-boot-imx 2014.04 to 2015.04 lead to freeze
Roberto Fichera
- [U-Boot] [PATCH] ARM: zynq: Remove unused SPI base addresses
Moritz Fischer
- [U-Boot] [PATCH] serial: zynq: Change logic in putc
Moritz Fischer
- [U-Boot] [PATCH] ARM: zynq: Enable SPL RAM support by default
Moritz Fischer
- [U-Boot] [PATCH] OMAP3: omap3_logic: Enable CONFIG_SMC911X_32_BIT
Adam Ford
- [U-Boot] [PATCH] OMAP3: omap3_logic: Remove YAFFS support.
Adam Ford
- [U-Boot] [PATCH V2] OMAP3: omap3_logic: Remove YAFFS support.
Adam Ford
- [U-Boot] 9c11135 breaks bootz
Adam Ford
- [U-Boot] 9c11135 breaks bootz
Adam Ford
- [U-Boot] [PATCH] OMAP3: omap3_logic: Grow SPL to 64K from 54K
Adam Ford
- [U-Boot] [PATCH] OMAP3LOGIC: Update maintainer
Adam Ford
- [U-Boot] [PATCH] OMAP3_logic: Add NAND args to boot UBIFS
Adam Ford
- [U-Boot] [PATCH V2] OMAP3_logic: Add NAND args to boot UBIFS
Adam Ford
- [U-Boot] [PATCH] OMAP3SOM BOARD: Auto detect Logic PD Models
Adam Ford
- [U-Boot] [PATCH V2] OMAP3SOM BOARD: Auto detect Logic PD Models
Adam Ford
- [U-Boot] [PATCH] dm: ns16550: Add support for reg-offset property
Adam Ford
- [U-Boot] [PATCH V2] OMAP3SOM BOARD: Auto detect Logic PD Models
Adam Ford
- [U-Boot] [PATCH] dm: ns16550: Add support for reg-offset property
Adam Ford
- [U-Boot] [PATCH] OMAP3: Various: Update serial platdata to update reg_offset to 0
Adam Ford
- [U-Boot] [PATCH V2] OMAP3: Various: Update serial platdata to update reg_offset to 0
Adam Ford
- [U-Boot] [PATCH V2] OMAP3: Various: Update serial platdata to update reg_offset to 0
Adam Ford
- [U-Boot] [PATCH V2] OMAP3: Various: Update serial platdata to update reg_offset to 0
Adam Ford
- [U-Boot] Issue with USB mass storage (thumb drives)
Schrempf Frieder
- [U-Boot] Issue with USB mass storage (thumb drives)
Schrempf Frieder
- [U-Boot] Issue with USB mass storage (thumb drives)
Schrempf Frieder
- [U-Boot] Issue with USB mass storage (thumb drives)
Schrempf Frieder
- [U-Boot] Issue with USB mass storage (thumb drives)
Schrempf Frieder
- [U-Boot] Issue with USB mass storage (thumb drives)
Schrempf Frieder
- [U-Boot] Issue with USB mass storage (thumb drives)
Schrempf Frieder
- [U-Boot] Issue with USB mass storage (thumb drives)
Schrempf Frieder
- [U-Boot] [PATCH] .travis.yml: explicitly request sudo
Andreas Färber
- [U-Boot] [PATCH] arm: mvebu: db-88f6820: Drop obsolete binary.0 placeholder
Andreas Färber
- [U-Boot] [PATCH] spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS, if available
Guillaume GARDET
- [U-Boot] [PATCH V2] spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS
Guillaume GARDET
- [U-Boot] [PATCH] api: Add FreeBSD API support for MIPS platforms
Stanislav Galabov
- [U-Boot] [PATCH] api: Add FreeBSD API support for MIPS platforms
Stanislav Galabov
- [U-Boot] [PATCH 0/4] QEMU (qemu-mips) and MIPS 64-bit changes
Stanislav Galabov
- [U-Boot] [PATCH 1/4] Properly calculate ATA_SECTORWORDS, using a fixed-size integer, so it works for both 32-bit and 64-bit targets
Stanislav Galabov
- [U-Boot] [PATCH 2/4] Use CONFIG_IDE_SWAP_IO when running on big-endian MIPS (32 or 64-bit) in QEMU so that IDE transfers work properly
Stanislav Galabov
- [U-Boot] [PATCH 3/4] Fix FreeBSD loader API so that it works on both 32-bit and 64-bit targets.
Stanislav Galabov
- [U-Boot] [PATCH 4/4] Add support for 64-bit MIPS to examples/standalone
Stanislav Galabov
- [U-Boot] Need support for Raspberry pi B+ u-boot.bin
Jay Gandhi
- [U-Boot] Beaglebone Black broken since commit fd61d39970b9901217efc7536d9f3a61b4e1752a
Guillaume Gardet
- [U-Boot] [PATCH] spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS, if available
Guillaume Gardet
- [U-Boot] [PATCH] spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS, if available
Guillaume Gardet
- [U-Boot] [PATCH] spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS, if available
Guillaume Gardet
- [U-Boot] [PATCH] spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS, if available
Guillaume Gardet
- [U-Boot] [PATCH v3 0/7] fdt: Replace u-boot-dtb.bin with u-boot.bin
Simon Glass
- [U-Boot] [PATCH v3 1/7] tegra: Clarify generation of -nodtb file with OF_CONTROL
Simon Glass
- [U-Boot] [PATCH v3 2/7] fdt: Build a U-Boot binary without device tree
Simon Glass
- [U-Boot] [PATCH v3 3/7] fdt: Build an SPL binary without device tree
Simon Glass
- [U-Boot] [PATCH v3 4/7] tegra: Always build a boot image with the same filename
Simon Glass
- [U-Boot] [PATCH v3 5/7] socfpga: Simplify Makefile filenames
Simon Glass
- [U-Boot] [PATCH v3 6/7] Makefile: Make u-boot.img the same as u-boot-dtb.img
Simon Glass
- [U-Boot] [PATCH v3 7/7] Makefile: Drop unnecessary -dtb suffixes
Simon Glass
- [U-Boot] 64-bit x86 U-Boot?
Simon Glass
- [U-Boot] Conversion of serial_pxa.c to driver model
Simon Glass
- [U-Boot] [PATCH 00/14] EFI payload / application support v2
Simon Glass
- [U-Boot] [PATCH 00/14] EFI payload / application support v2
Simon Glass
- [U-Boot] [PATCH 00/23] x86: Convert to use DM PCI APIs completely
Simon Glass
- [U-Boot] [PATCH 01/23] spi: ich: Some clean up
Simon Glass
- [U-Boot] [PATCH 02/23] spi: ich: Use compatible strings to distinguish controller version
Simon Glass
- [U-Boot] [PATCH 03/23] spi: ich: Change PCHV_ to ICHV_
Simon Glass
- [U-Boot] [PATCH 04/23] x86: tnc: Drop unprotect_spi_flash()
Simon Glass
- [U-Boot] [PATCH 05/23] x86: quark: Drop unprotect_spi_flash()
Simon Glass
- [U-Boot] [PATCH 06/23] dm: pch: Remove pch_get_version op
Simon Glass
- [U-Boot] [PATCH 07/23] dm: pch: Rename get_sbase op to get_spi_base
Simon Glass
- [U-Boot] [PATCH 08/23] dm: pch: Add get_gpio_base op
Simon Glass
- [U-Boot] [PATCH 09/23] x86: pch: Implement get_gpio_base op
Simon Glass
- [U-Boot] [PATCH 10/23] dm: pch: Add get_io_base op
Simon Glass
- [U-Boot] [PATCH 11/23] x86: pch9: Implement get_io_base op
Simon Glass
- [U-Boot] [PATCH 12/23] x86: ich6_gpio: Convert to use proper DM API
Simon Glass
- [U-Boot] [PATCH 13/23] x86: Drop asm/arch/gpio.h
Simon Glass
- [U-Boot] [PATCH 14/23] x86: minnowmax: Drop io-base property in the pch_pinctrl node
Simon Glass
- [U-Boot] [PATCH 15/23] x86: irq: Get irq_router's bdf via dm_pci_get_bdf()
Simon Glass
- [U-Boot] [PATCH 16/23] x86: irq: Move irq_router to a per driver priv
Simon Glass
- [U-Boot] [PATCH 19/23] x86: tnc: Use DM PCI API in disable_igd()
Simon Glass
- [U-Boot] [PATCH 18/23] x86: tnc: Change disable_igd() to have a return value
Simon Glass
- [U-Boot] [PATCH 17/23] x86: irq: Convert to use DM PCI API
Simon Glass
- [U-Boot] [PATCH 20/23] x86: tnc: Remove IGD and SDVO devices from driver model
Simon Glass
- [U-Boot] [PATCH 21/23] x86: qemu: Convert to use DM PCI API
Simon Glass
- [U-Boot] [PATCH 22/23] x86: pci: Use DM PCI APIs in pci_assign_irqs()
Simon Glass
- [U-Boot] [PATCH 23/23] x86: pci: Drop legacy PCI APIs
Simon Glass
- [U-Boot] DM ethernet driver with multiple interfaces per device
Simon Glass
- [U-Boot] Converting arm_dcc to driver model
Simon Glass
- [U-Boot] [PATCH 04/14] efi_loader: Add boot time services
Simon Glass
- [U-Boot] [PATCH 00/14] EFI payload / application support v2
Simon Glass
- [U-Boot] [PATCH 1/2] pinctrl: imx: Introduce pinctrl driver for i.MX6
Simon Glass
- [U-Boot] [PATCH 2/2] pinctrl: imx: Support i.MX7D
Simon Glass
- [U-Boot] [PATCH V2] fdt: introduce fdtdec_get_child_count
Simon Glass
- [U-Boot] [PATCH] patman: fix series-notes handling for buildman
Simon Glass
- [U-Boot] [PATCH v1 1/2] Revert "powerpc: mpc85xx: remove P2020DS board support"
Simon Glass
- [U-Boot] [PATCH] exynos: Set CNTFRQ
Simon Glass
- [U-Boot] [PATCH v3 0/7] fdt: Replace u-boot-dtb.bin with u-boot.bin
Simon Glass
- [U-Boot] [PATCH v2 00/23] dm: tegra: Convert tegra20 and tegra124 video drivers to driver model
Simon Glass
- [U-Boot] [PATCH v2 00/23] dm: tegra: Convert tegra20 and tegra124 video drivers to driver model
Simon Glass
- [U-Boot] [PATCH 00/14] EFI payload / application support v2
Simon Glass
- [U-Boot] [PATCH 00/23] x86: Convert to use DM PCI APIs completely
Simon Glass
- [U-Boot] [PATCH v2] ARM: uniphier: update U-Boot file names
Simon Glass
- [U-Boot] 64-bit x86 U-Boot?
Simon Glass
- [U-Boot] Converting serial_s3c24x0.c to driver model
Simon Glass
- [U-Boot] [PATCH 01/11] net: pch_gbe: Convert to use DM PCI API
Simon Glass
- [U-Boot] [PATCH 02/11] net: designware: Use dm_pci_mem_to_phys() in the probe routine
Simon Glass
- [U-Boot] [PATCH 03/11] net: e1000: Convert to use DM PCI API
Simon Glass
- [U-Boot] [PATCH 04/11] x86: quark: Use Quark's own PCI config APIs
Simon Glass
- [U-Boot] [PATCH 05/11] efi: app: Clean up defconfig
Simon Glass
- [U-Boot] [PATCH 06/11] efi: app: Disable CONFIG_USB_EHCI_PCI
Simon Glass
- [U-Boot] [PATCH 07/11] x86: chromebox_panther: Drop the cache line size hack
Simon Glass
- [U-Boot] [PATCH 08/11] x86: chromebox_panther: Convert to use driver model ethernet
Simon Glass
- [U-Boot] [PATCH 09/11] dm: pci: Add missing forward declarations
Simon Glass
- [U-Boot] [PATCH 11/11] x86: Drop pci_type1.c and DEFINE_PCI_DEVICE_TABLE
Simon Glass
- [U-Boot] [PATCH 10/11] x86: Disable DM_PCI_COMPAT
Simon Glass
- [U-Boot] [PATCH 00/23] x86: Convert to use DM PCI APIs completely
Simon Glass
- [U-Boot] [PATCH 01/16] disk/part.c: Expose list of available block drivers
Simon Glass
- [U-Boot] [PATCH 02/16] include/efi_api.h: Add more detailed API definitions
Simon Glass
- [U-Boot] [PATCH 03/16] efi_loader: Add PE image loader
Simon Glass
- [U-Boot] [PATCH 04/16] efi_loader: Add boot time services
Simon Glass
- [U-Boot] [PATCH 06/16] efi_loader: Add runtime services
Simon Glass
- [U-Boot] [PATCH 05/16] efi_loader: Add console interface
Simon Glass
- [U-Boot] [PATCH 07/16] efi_loader: Add disk interfaces
Simon Glass
- [U-Boot] [PATCH 08/16] efi_loader: Add "bootefi" command
Simon Glass
- [U-Boot] [PATCH 09/16] efi_loader: Implement memory allocation and map
Simon Glass
- [U-Boot] [PATCH 13/16] efi_loader: hook up in build environment
Simon Glass
- [U-Boot] [PATCH 15/16] efi_loader: Add README section in README.efi
Simon Glass
- [U-Boot] [PATCH 16/16] efi_loader: Add MAINTAINERS entry
Simon Glass
- [U-Boot] [PATCH 00/23] x86: Convert to use DM PCI APIs completely
Simon Glass
- [U-Boot] 64-bit x86 U-Boot?
Simon Glass
- [U-Boot] [PATCH 00/23] x86: Convert to use DM PCI APIs completely
Simon Glass
- [U-Boot] [PATCH 00/23] x86: Convert to use DM PCI APIs completely
Simon Glass
- [U-Boot] [PATCH 14/16] efi_loader: Add distro boot script for removable media
Simon Glass
- [U-Boot] [PATCH] ns16550: Clean up & unify register accessors
Simon Glass
- [U-Boot] help on using patman
Simon Glass
- [U-Boot] [PATCH v3 2/3] kbuild: add missing FORCE where $(call if_changed, ) is used
Simon Glass
- [U-Boot] [PATCH v3 3/3] kbuild: fix build rule of u-boot-spl.dtb
Simon Glass
- [U-Boot] [PATCH v3 1/3] kbuild: remove unneeded ifdef conditionals around build rules
Simon Glass
- [U-Boot] [PATCH] board_r: fix a typo in comment block
Simon Glass
- [U-Boot] [PATCH v2 3/7] drivers: block: disk-uclass: implement scsi_init()
Simon Glass
- [U-Boot] [RFC PATCH] itest: allow map_physmem to return 0 in limited cases
Simon Glass
- [U-Boot] [PATCH] gunzip: remove avail_in recalculation
Simon Glass
- [U-Boot] [PATCH V2 1/2] Makefile: generate symbol list from u-boot
Simon Glass
- [U-Boot] [PATCH V2 2/2] test/py: run all "ut" subtests
Simon Glass
- [U-Boot] [PATCH] test/py: exit(1) if there are problems running py.test
Simon Glass
- [U-Boot] [PATCH] test/py: HTML awesome!
Simon Glass
- [U-Boot] [PATCH] test/py: support running sandbox under gdbserver
Simon Glass
- [U-Boot] [PATCH V2 1/2] test/py: fix off-by-one error in spawn matching code
Simon Glass
- [U-Boot] [PATCH V2 2/2] test/py: capture the entire U-Boot version at boot
Simon Glass
- [U-Boot] [PATCH] test/py: support running sandbox under gdbserver
Simon Glass
- [U-Boot] [PATCH] serial: zynq: Change logic in putc
Simon Glass
- [U-Boot] help on using patman
Simon Glass
- [U-Boot] [PATCH] serial: pl01x: Add support for devices with the rate pre-configured.
Simon Glass
- [U-Boot] [PATCH] gunzip: remove avail_in recalculation
Simon Glass
- [U-Boot] [RFC PATCH] itest: allow map_physmem to return 0 in limited cases
Simon Glass
- [U-Boot] [PATCH] test/py: exit(1) if there are problems running py.test
Simon Glass
- [U-Boot] [PATCH] test/py: HTML awesome!
Simon Glass
- [U-Boot] [PATCH V2 1/2] test/py: fix off-by-one error in spawn matching code
Simon Glass
- [U-Boot] [PATCH V2 2/2] test/py: capture the entire U-Boot version at boot
Simon Glass
- [U-Boot] [PATCH 1/2] dm: video: Add a temporary work-around for old stdout var
Simon Glass
- [U-Boot] [PATCH 2/2] video: tegra: Enable the 'lcd' env variable work-around
Simon Glass
- [U-Boot] [PATCH v2 00/23] dm: tegra: Convert tegra20 and tegra124 video drivers to driver model
Simon Glass
- [U-Boot] [PATCH v2 3/7] drivers: block: disk-uclass: implement scsi_init()
Simon Glass
- [U-Boot] [PATCH v2 2/5] superio: Add SMSC SIO1007 driver
Simon Glass
- [U-Boot] [PATCH v2 4/5] x86: ivybridge: bd82x6x: Support FSP enabled configuration
Simon Glass
- [U-Boot] [PATCH v2 5/5] x86: Add Intel Cougar Canyon 2 board
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] GSoC projects for Minnowboard MAX
Simon Glass
- [U-Boot] [PATCH 1/2] dm: core: Add uclass_first_device_err() to return a valid device
Simon Glass
- [U-Boot] [PATCH 2/2] dm: Use uclass_first_device_err() where it is useful
Simon Glass
- [U-Boot] [PATCH] arm: socfpga: Enable ethernet PHY configuration to RGMII again
Simon Glass
- [U-Boot] [PATCH 1/2] dm: video: Add a temporary work-around for old stdout var
Simon Glass
- [U-Boot] [PULL] u-boot-usb/master
Simon Glass
- [U-Boot] [PATCH v2 16/26] dm: tegra: net: Convert tegra boards to driver model for Ethernet
Simon Glass
- [U-Boot] [PATCH] arm: socfpga: Enable ethernet PHY configuration to RGMII again
Simon Glass
- [U-Boot] trouble with patman
Simon Glass
- [U-Boot] Issue with USB mass storage (thumb drives)
Simon Glass
- [U-Boot] u-boot legacy/FIT/FIT+signature compatability
Simon Glass
- [U-Boot] Fwd: Patman use (was: [PATCHv2] common/memsize.c: Simplify RAM size detection)
Simon Glass
- [U-Boot] cramfs and eMMC support
Simon Glass
- [U-Boot] [PATCH 19/26] mkimage: Support adding device tree files to a FIT
Simon Glass
- [U-Boot] exclude email by patman
Simon Glass
- [U-Boot] [PATCH] x86: Clean up SPI flash drivers in defconfig
Simon Glass
- [U-Boot] [PATCH] x86: Clean up SPI flash drivers in defconfig
Simon Glass
- [U-Boot] [PATCH 01/12] mtd: spi-nor: Copy sf_dataflash
Simon Glass
- [U-Boot] [PATCH] x86: Clean up SPI flash drivers in defconfig
Simon Glass
- [U-Boot] [PATCH 01/12] mtd: spi-nor: Copy sf_dataflash
Simon Glass
- [U-Boot] [PULL] u-boot-usb/master
Simon Glass
- [U-Boot] [PATCH v2 16/26] dm: tegra: net: Convert tegra boards to driver model for Ethernet
Simon Glass
- [U-Boot] [PATCH] usb: eth: fix memalign() parameter order
Simon Glass
- [U-Boot] [PATCH] x86: fix memalign() parameter order
Simon Glass
- [U-Boot] [PATCH] gpio: Correct handling of 'gpio status'
Simon Glass
- [U-Boot] [PATCH v2 00/23] dm: tegra: Convert tegra20 and tegra124 video drivers to driver model
Simon Glass
- [U-Boot] [PATCH] ARM: tegra: enable USB device mode port on Dalmore
Simon Glass
- [U-Boot] [PATCH] test/py: add docs for gdbserver and pytest options
Simon Glass
- [U-Boot] [PATCH 1/2] test/py: don't import pexpect
Simon Glass
- [U-Boot] [PATCH 2/2] Enable test/py for sandbox in Travis CI
Simon Glass
- [U-Boot] [PATCH] test/py: fix CONFIG_SPL test
Simon Glass
- [U-Boot] [PATCH] test/py: print summary in test order
Simon Glass
- [U-Boot] [PATCH V3] Makefile: remove BUILD_TAG from KBUILD_CFLAGS
Simon Glass
- [U-Boot] [PATCH] test/py: handle exceptions in console creation
Simon Glass
- [U-Boot] [PATCH] test/py: put "Starting U-Boot" into separate log section
Simon Glass
- [U-Boot] [PATCH 00/16] image: Fix various test failures
Simon Glass
- [U-Boot] [PATCH 01/16] image: Correct the OS location code to work on sandbox
Simon Glass
- [U-Boot] [PATCH 02/16] Revert "image-fit: Fix signature checking"
Simon Glass
- [U-Boot] [PATCH 03/16] image: Fix FIT and vboot tests to exit sandbox correctly
Simon Glass
- [U-Boot] [PATCH 04/16] trace: Fix compiler warnings in trace
Simon Glass
- [U-Boot] [PATCH 05/16] lib: Don't instrument the div64 function
Simon Glass
- [U-Boot] [PATCH 06/16] trace: Improve the trace test number recognition
Simon Glass
- [U-Boot] [PATCH 07/16] timer: Support tracing fully
Simon Glass
- [U-Boot] [PATCH 08/16] timer: Provide an early timer
Simon Glass
- [U-Boot] [PATCH 09/16] timer: Set up the real timer after driver model is available
Simon Glass
- [U-Boot] [PATCH 10/16] sandbox: timer: Support the early timer
Simon Glass
- [U-Boot] [PATCH 11/16] sandbox: Correct ordering of defconfig
Simon Glass
- [U-Boot] [PATCH 12/16] sandbox: Enable the early timer
Simon Glass
- [U-Boot] [PATCH 13/16] sandbox: spi: Add more debugging to SPI emulation
Simon Glass
- [U-Boot] [PATCH 14/16] sandbox: spi: Remove an incorrect free()
Simon Glass
- [U-Boot] [PATCH 15/16] spi: Correct two error return values
Simon Glass
- [U-Boot] [PATCH 16/16] spi: Re-enable the SPI flash tests
Simon Glass
- [U-Boot] [PATCH 00/30] dm: Add driver-model support for block drivers
Simon Glass
- [U-Boot] [PATCH 01/30] dm: Drop the block_dev_desc_t typedef
Simon Glass
- [U-Boot] [PATCH 02/30] dm: pci: Break out the common region display code
Simon Glass
- [U-Boot] [PATCH 03/30] dm: part: Correct a sandbox build warning
Simon Glass
- [U-Boot] [PATCH 04/30] dm: fdtdec: Correct a sandbox build warning
Simon Glass
- [U-Boot] [PATCH 05/30] dm: part: Drop the common.h header
Simon Glass
- [U-Boot] [PATCH 06/30] dm: Add a new header for block devices
Simon Glass
- [U-Boot] [PATCH 07/30] dm: blk: Convert interface type to an enum
Simon Glass
- [U-Boot] [PATCH 08/30] dm: blk: Add comments to a few functions
Simon Glass
- [U-Boot] [PATCH 09/30] dm: blk: Rename get_dev() to blk_get_dev()
Simon Glass
- [U-Boot] [PATCH 10/30] dm: blk: Rename get_device() to blk_get_device_str()
Simon Glass
- [U-Boot] [PATCH 11/30] dm: blk: Rename get_device_and_partition()
Simon Glass
- [U-Boot] [PATCH 12/30] dm: part: Add a cast to avoid a compiler warning
Simon Glass
- [U-Boot] [PATCH 13/30] dm: sandbox: Enable all partition types
Simon Glass
- [U-Boot] [PATCH 14/30] dm: part: Convert partition API use to linker lists
Simon Glass
- [U-Boot] [PATCH 15/30] dm: part: Rename some partition functions
Simon Glass
- [U-Boot] [PATCH 16/30] dm: cbfs: Fix handling of invalid type
Simon Glass
- [U-Boot] [PATCH 17/30] dm: sandbox: Enable cbfs and cramfs
Simon Glass
- [U-Boot] [PATCH 18/30] dm: block: Rename device number member dev to devnum
Simon Glass
- [U-Boot] [PATCH 19/30] dm: block: Adjust device calls to go through helpers function
Simon Glass
- [U-Boot] [PATCH 20/30] dm: usb: Avoid exceeding available array size for storage devices
Simon Glass
- [U-Boot] [PATCH 21/30] dm: usb: Tidy up storage code ready for driver model conversion
Simon Glass
- [U-Boot] [PATCH 22/30] dm: blk: Add a block-device uclass
Simon Glass
- [U-Boot] [PATCH 23/30] dm: sandbox: Prepare block driver for driver-model conversion
Simon Glass
- [U-Boot] [PATCH 24/30] dm: sandbox: Add driver-model block-device support for sandbox
Simon Glass
- [U-Boot] [PATCH 25/30] dm: usb: Convert USB storage to use driver-model for block devs
Simon Glass
- [U-Boot] [PATCH 26/30] dm: usb: Unbind old block devices when shutting down USB
Simon Glass
- [U-Boot] [PATCH 27/30] dm: sandbox: Switch over to use DM for block devices
Simon Glass
- [U-Boot] [PATCH 28/30] dm: sandbox: Drop the pre-DM host implementation
Simon Glass
- [U-Boot] [PATCH 29/30] dm: usb: Clean up USB after each test
Simon Glass
- [U-Boot] [PATCH 30/30] dm: blk: Add tests for block devices
Simon Glass
- [U-Boot] [Regression] gpio set command broken
Simon Glass
- [U-Boot] [PATCH v2 02/18] gpio: Add support for Qualcomm gpio controller
Simon Glass
- [U-Boot] [PATCH 1/6] net: gem: Add support for reading MAC from I2C EEPROM
Simon Glass
- [U-Boot] [PATCH] fdt: Try to read #address-cells/size-cells from parent
Simon Glass
- [U-Boot] [PATCH 3/3] spi: omap3: Convert to driver model
Simon Glass
- [U-Boot] [PATCH 3/4] stm32x7: add support for stm32x7 serial driver
Simon Glass
- [U-Boot] [PATCH V2 1/2] pinctrl: imx: Introduce pinctrl driver for i.MX6
Simon Glass
- [U-Boot] how does board_init_f() -> board_init_r?
Simon Glass
- [U-Boot] [PATCH v2 1/7] arm: omap: sata: move enable sata clocks to enable_basic_clocks()
Simon Glass
- [U-Boot] [PATCH v2 2/7] arm: omap: sata: compile out sata init apis when CONFIG_DISK is defined
Simon Glass
- [U-Boot] [PATCH v2 3/7] drivers: block: disk-uclass: implement scsi_init()
Simon Glass
- [U-Boot] [PATCH v2 4/7] arm: omap-common: sata: prepare driver for DM conversion
Simon Glass
- [U-Boot] [PATCH v2 6/7] defconfig: dra74_evm: enable disk driver model
Simon Glass
- [U-Boot] [PATCH v2 7/7] defconfig: dra72_evm: enable disk driver model
Simon Glass
- [U-Boot] [RFC PATCH v4 1/3] sandbox: Fix compiling warning on 32-bit host
Simon Glass
- [U-Boot] [RFC PATCH v4 2/3] common: Convert ulong to phys_addr_t for image addresses
Simon Glass
- [U-Boot] [RFC PATCH v4 3/3] common: Fix load and entry addresses in FIT image
Simon Glass
- [U-Boot] [PATCH v2 00/23] dm: tegra: Convert tegra20 and tegra124 video drivers to driver model
Simon Glass
- [U-Boot] [PATCH 1/6] net: gem: Add support for reading MAC from I2C EEPROM
Simon Glass
- [U-Boot] Warnings from Tegra LCD conversion?
Simon Glass
- [U-Boot] [PATCH v2 00/23] dm: tegra: Convert tegra20 and tegra124 video drivers to driver model
Simon Glass
- [U-Boot] [PATCH] video: tegra: Correct a Kconfig warning with VIDCONSOLE_AS_LCD
Simon Glass
- [U-Boot] [PATCH v2 00/23] dm: tegra: Convert tegra20 and tegra124 video drivers to driver model
Simon Glass
- [U-Boot] [PATCH V2 1/2] pinctrl: imx: Introduce pinctrl driver for i.MX6
Simon Glass
- [U-Boot] GSoC projects for Minnowboard MAX
Simon Glass
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Simon Glass
- [U-Boot] [PATCH] rockchip: rk3036: change ddr frequency to 400M
Simon Glass
- [U-Boot] [PATCH 1/4] tools: -Wno-deprecated-declarations for OpenSSL on darwin
Simon Glass
- [U-Boot] [PATCH] RFC/BUG Workaround regression with "mkimage -T rksd".
Simon Glass
- [U-Boot] [PATCH 1/2] serial: dcc: Move driver to DM
Simon Glass
- [U-Boot] [PATCH 2/2] ARM: zynq: zynqmp: Enable DCC serial driver by default
Simon Glass
- [U-Boot] [PATCH] pci: Fix compiler warnings in dm_pciauto_setup_device()
Simon Glass
- [U-Boot] [PATCH] dm: ns16550: Add support for reg-offset property
Simon Glass
- [U-Boot] [PATCH RESEND] test/py: use space to interrupt autoboot
Simon Glass
- [U-Boot] [PATCH RESEND] test/py: skip tests that require large CONFIG_SYS_MAXARGS
Simon Glass
- [U-Boot] [PATCH V2 1/2] ARM: tegra: don't set CONFIG_USB_MAX_CONTROLLER_COUNT
Simon Glass
- [U-Boot] [PATCH V2 2/2] ARM: tegra: enable USB device mode port on Dalmore
Simon Glass
- [U-Boot] [PATCH 00/26] spl: Support loading a FIT image containing U-Boot
Simon Glass
- [U-Boot] [PATCH] x86: doc: Update to include Intel Bayley Bay board instructions
Simon Glass
- [U-Boot] [PATCH v4 5/6] rockchip: kylin: Enable boot with android boot image
Simon Glass
- [U-Boot] [PATCH 01/10] fdtdec: Add compatible string for Intel IvyBridge FSP
Simon Glass
- [U-Boot] GSoC projects for Minnowboard MAX
Simon Glass
- [U-Boot] [PATCH v2 00/25] exynos: video: Convert exynos LCD driver to use driver model
Simon Glass
- [U-Boot] [PATCH v2 01/25] exynos: video: Move driver files into their own directory
Simon Glass
- [U-Boot] [PATCH v2 02/25] exynos: video: Drop dead code
Simon Glass
- [U-Boot] [PATCH v2 03/25] exynos: video: Remove use of vidinfo_t typedef
Simon Glass
- [U-Boot] [PATCH v2 04/25] exynos: video: Drop the static lcd_base_addr variable
Simon Glass
- [U-Boot] [PATCH v2 05/25] exynos: video: Drop static variables in exynos_fimd.c
Simon Glass
- [U-Boot] [PATCH v2 06/25] exynos: video: Drop static variables in exynos_fb.c
Simon Glass
- [U-Boot] [PATCH v2 07/25] exynos: video: Drop static variables in exynos_dp_lowlevel.c
Simon Glass
- [U-Boot] [PATCH v2 08/25] exynos: video: Move dsim_config_dt into a function
Simon Glass
- [U-Boot] [PATCH v2 09/25] exynos: video: Move struct exynos_platform_mipi_dsim into vidinfo
Simon Glass
- [U-Boot] [PATCH v2 10/25] exynos: video: Move mipi_lcd_device_dt into a function
Simon Glass
- [U-Boot] [PATCH v2 11/25] exynos: video: Combine LCD driver into one file
Simon Glass
- [U-Boot] [PATCH v2 12/25] exynos: pwm: Add a driver for the exynos5 PWM
Simon Glass
- [U-Boot] [PATCH v2 13/25] video: Add an enum for active low/high
Simon Glass
- [U-Boot] [PATCH v2 14/25] exynos: dts: Add pwm device tree node
Simon Glass
- [U-Boot] [PATCH v2 15/25] exynos: Allow tizen to be built without an LCD
Simon Glass
- [U-Boot] [PATCH v2 16/25] exynos: Allow CONFIG_MISC_COMMON to be build without an LCD
Simon Glass
- [U-Boot] [PATCH v2 17/25] exynos: Disable LCD display for boards we can't convert
Simon Glass
- [U-Boot] [PATCH v2 18/25] dts: Add clock and regulator binding files for max77802
Simon Glass
- [U-Boot] [PATCH v2 19/25] exynos: Allow PWM0 pinmux to be set up
Simon Glass
- [U-Boot] [PATCH v2 20/25] exynos: Simplify calling of exynos_dp_phy_ctrl()
Simon Glass
- [U-Boot] [PATCH v2 21/25] exynos: dts: Add display-related device tree fragments
Simon Glass
- [U-Boot] [PATCH v2 22/25] exynos: video: Rename edp_device_info to exynos_dp_priv
Simon Glass
- [U-Boot] [PATCH v2 23/25] exynos: video: Rename variables for driver model
Simon Glass
- [U-Boot] [PATCH v2 24/25] exynos: video: Convert several boards to driver model for video
Simon Glass
- [U-Boot] [PATCH v2 25/25] exynos: video: Drop old unused code
Simon Glass
- [U-Boot] [PATCH 1/2] video: truetype: Fix a memory leak on error
Simon Glass
- [U-Boot] [PATCH 2/2] video: freetype: Fix a memory leak with a bad parameter
Simon Glass
- [U-Boot] [PATCH 23/26] spl: Add an option to load a FIT containing U-Boot
Simon Glass
- [U-Boot] [PATCH v2 00/27] spl: Support loading a FIT image containing U-Boot
Simon Glass
- [U-Boot] [PATCH v2 01/27] mkimage: Move argument processing into its own function
Simon Glass
- [U-Boot] [PATCH v2 02/27] mkimage: Convert to use getopt()
Simon Glass
- [U-Boot] [PATCH v2 03/27] mkimage: Sort the option processing code by option
Simon Glass
- [U-Boot] [PATCH v2 04/27] mkimage: Move usage() up to the top
Simon Glass
- [U-Boot] [PATCH v2 05/27] mkimage: Show an error message when usage() is called
Simon Glass
- [U-Boot] [PATCH v2 06/27] mkimage: Make 'params' static
Simon Glass
- [U-Boot] [PATCH v2 07/27] libfdt: Add a function to write a property placeholder
Simon Glass
- [U-Boot] [PATCH v2 08/27] Correct defconfig ordering
Simon Glass
- [U-Boot] [PATCH v2 09/27] freescale: Remove CONFIG_DM from header files
Simon Glass
- [U-Boot] [PATCH v2 10/27] Move CONFIG_OF_LIBFDT to Kconfig
Simon Glass
- [U-Boot] [PATCH v2 11/27] Kconfig: Move CONFIG_FIT and related options to Kconfig
Simon Glass
- [U-Boot] [PATCH v2 12/27] fdt: Adjust DEFAULT_DEVICE_TREE to device on OF_CONTROL
Simon Glass
- [U-Boot] [PATCH v2 13/27] fdt: Allow libfdt to be used in SPL
Simon Glass
- [U-Boot] [PATCH v2 14/27] sunxi: Display the board model on start-up
Simon Glass
- [U-Boot] [PATCH v2 15/27] tools: Include fdt_sw.o in libfdt for mkimage
Simon Glass
- [U-Boot] [PATCH v2 16/27] mkimage: Allow a FIT to include an image of any type
Simon Glass
- [U-Boot] [PATCH v2 17/27] tools: Add a function to obtain the size of a file
Simon Glass
- [U-Boot] [PATCH v2 18/27] image: Add functions to obtain short names
Simon Glass
- [U-Boot] [PATCH v2 19/27] mkimage: Support automatic creating of a FIT without a .its
Simon Glass
- [U-Boot] [PATCH v2 20/27] mkimage: Support adding device tree files to a FIT
Simon Glass
- [U-Boot] [PATCH v2 21/27] mkimage: Support placing data outside the FIT
Simon Glass
- [U-Boot] [PATCH v2 22/27] mkimage: Bring data into the FIT before processing
Simon Glass
- [U-Boot] [PATCH v2 23/27] spl: Add a way for boards to select which device tree to load
Simon Glass
- [U-Boot] [PATCH v2 24/27] spl: Add an option to load a FIT containing U-Boot
Simon Glass
- [U-Boot] [PATCH v2 25/27] spl: Add a way to specify a list of device trees to include
Simon Glass
- [U-Boot] [PATCH v2 26/27] spl: Support loading a FIT from MMC
Simon Glass
- [U-Boot] [PATCH v2 27/27] RFC: sunxi: Enable SPL FIT support
Simon Glass
- [U-Boot] fdtgrep results in Segmentation fault for 64bit DT
Simon Glass
- [U-Boot] [PATCH 07/16] timer: Support tracing fully
Simon Glass
- [U-Boot] [PATCH 08/16] timer: Provide an early timer
Simon Glass
- [U-Boot] [PATCH 10/16] sandbox: timer: Support the early timer
Simon Glass
- [U-Boot] [PATCH 1/2] dm: core: Add uclass_first_device_err() to return a valid device
Simon Glass
- [U-Boot] uboot fdt commands
Simon Glass
- [U-Boot] [PATCH 1/2] serial: dcc: Move driver to DM
Simon Glass
- [U-Boot] [PATCH] dm: ns16550: Add support for reg-offset property
Simon Glass
- [U-Boot] [PATCH v2 00/25] exynos: video: Convert exynos LCD driver to use driver model
Simon Glass
- [U-Boot] [PATCH v2 1/2] serial: dcc: Move driver to DM
Simon Glass
- [U-Boot] [PATCH 2/9] arm64: Make full va map code more dynamic
Simon Glass
- [U-Boot] [PATCH 2/9] arm64: Make full va map code more dynamic
Simon Glass
- [U-Boot] [PATCH 2/9] arm64: Make full va map code more dynamic
Simon Glass
- [U-Boot] [RFC PATCH v4 2/3] common: Convert ulong to phys_addr_t for image addresses
Simon Glass
- [U-Boot] [PATCH] dm: serial: Move a carriage return before a line feed
Simon Glass
- [U-Boot] [PATCH 2/9] arm64: Make full va map code more dynamic
Simon Glass
- [U-Boot] [PATCH] dts: keep clock-names and clocks in SPL DTB if SPL_CLK is enabled
Simon Glass
- [U-Boot] [PATCH v2] patman: fix series-notes handling for buildman
Simon Glass
- [U-Boot] [PATCH v2 00/16] image: Fix various test failures
Simon Glass
- [U-Boot] [PATCH v2 01/16] image: Correct the OS location code to work on sandbox
Simon Glass
- [U-Boot] [PATCH v2 02/16] Revert "image-fit: Fix signature checking"
Simon Glass
- [U-Boot] [PATCH v2 03/16] image: Fix FIT and vboot tests to exit sandbox correctly
Simon Glass
- [U-Boot] [PATCH v2 04/16] trace: Fix compiler warnings in trace
Simon Glass
- [U-Boot] [PATCH v2 05/16] lib: Don't instrument the div64 function
Simon Glass
- [U-Boot] [PATCH v2 06/16] trace: Improve the trace test number recognition
Simon Glass
- [U-Boot] [PATCH v2 07/16] timer: Support tracing fully
Simon Glass
- [U-Boot] [PATCH v2 08/16] timer: Provide an early timer
Simon Glass
- [U-Boot] [PATCH v2 09/16] timer: Set up the real timer after driver model is available
Simon Glass
- [U-Boot] [PATCH v2 10/16] sandbox: timer: Support the early timer
Simon Glass
- [U-Boot] [PATCH v2 11/16] sandbox: Correct ordering of defconfig
Simon Glass
- [U-Boot] [PATCH v2 12/16] sandbox: Enable the early timer
Simon Glass
- [U-Boot] [PATCH v2 13/16] sandbox: spi: Add more debugging to SPI emulation
Simon Glass
- [U-Boot] [PATCH v2 14/16] sandbox: spi: Remove an incorrect free()
Simon Glass
- [U-Boot] [PATCH v2 15/16] spi: Correct two error return values
Simon Glass
- [U-Boot] [PATCH v2 16/16] spi: Re-enable the SPI flash tests
Simon Glass
- [U-Boot] [PATCH] dm: Remove ARM dcc from the list
Simon Glass
- [U-Boot] [PATCH] microblaze: Add missing chosen node
Simon Glass
- [U-Boot] [PATCH] cmd: mem: Show 64bit addresses which are tested
Simon Glass
- [U-Boot] [RFC PATCH v4 3/3] common: Fix load and entry addresses in FIT image
Simon Glass
- [U-Boot] [PATCH] dm: ns16550: Add support for reg-offset property
Simon Glass
- [U-Boot] Issue with USB mass storage (thumb drives)
Simon Glass
- [U-Boot] [PATCH] dts: keep clock-names and clocks in SPL DTB if SPL_CLK is enabled
Simon Glass
- [U-Boot] [PATCH v2] patman: fix series-notes handling for buildman
Simon Glass
- [U-Boot] [PATCH v2 00/16] image: Fix various test failures
Simon Glass
- [U-Boot] [U-Boot, v2, 3/7] drivers: block: disk-uclass: implement scsi_init()
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] [PATCH] serial: Move carriage return before line feed for some serial drivers
Simon Glass
- [U-Boot] Issue with USB mass storage (thumb drives)
Simon Glass
- [U-Boot] [PATCH v4 01/11] thunderx: Calculate TCR dynamically
Simon Glass
- [U-Boot] [PATCH 0/9] Add CONFIG_CMDLINE to allow removal of all commands
Simon Glass
- [U-Boot] [PATCH 1/9] cbfs: Update a function to be static
Simon Glass
- [U-Boot] [PATCH 2/9] Add an option to enable the command line
Simon Glass
- [U-Boot] [PATCH 3/9] arm: x86: Drop command-line code when CONFIG_CMDLINE is disabled
Simon Glass
- [U-Boot] [PATCH 4/9] sandbox: Avoid calling commands when not available
Simon Glass
- [U-Boot] [PATCH 5/9] Drop command-processing code when CONFIG_CMDLINE is disabled
Simon Glass
- [U-Boot] [PATCH 6/9] Hang when no command line processing can be performed
Simon Glass
- [U-Boot] [PATCH 7/9] Allow command code to compile to nothing
Simon Glass
- [U-Boot] [PATCH 8/9] Allow command-line files to be dropped
Simon Glass
- [U-Boot] [PATCH 9/9] Drop various features when the command line is not available
Simon Glass
- [U-Boot] [PATCH v4 01/11] thunderx: Calculate TCR dynamically
Simon Glass
- [U-Boot] [PATCH v4 01/11] thunderx: Calculate TCR dynamically
Simon Glass
- [U-Boot] [PATCH] pci: Fix compiler warnings in dm_pciauto_setup_device()
Simon Glass
- [U-Boot] [PATCH v2 01/16] image: Correct the OS location code to work on sandbox
Simon Glass
- [U-Boot] [PATCH v2 02/16] Revert "image-fit: Fix signature checking"
Simon Glass
- [U-Boot] [PATCH v2 03/16] image: Fix FIT and vboot tests to exit sandbox correctly
Simon Glass
- [U-Boot] [PATCH v2 04/16] trace: Fix compiler warnings in trace
Simon Glass
- [U-Boot] [PATCH v2 05/16] lib: Don't instrument the div64 function
Simon Glass
- [U-Boot] [PATCH v2 06/16] trace: Improve the trace test number recognition
Simon Glass
- [U-Boot] [PATCH v2 07/16] timer: Support tracing fully
Simon Glass
- [U-Boot] [PATCH v2 08/16] timer: Provide an early timer
Simon Glass
- [U-Boot] [PATCH v2 09/16] timer: Set up the real timer after driver model is available
Simon Glass
- [U-Boot] [PATCH v2 10/16] sandbox: timer: Support the early timer
Simon Glass
- [U-Boot] [PATCH v2 11/16] sandbox: Correct ordering of defconfig
Simon Glass
- [U-Boot] [PATCH v2 12/16] sandbox: Enable the early timer
Simon Glass
- [U-Boot] [PATCH v2 13/16] sandbox: spi: Add more debugging to SPI emulation
Simon Glass
- [U-Boot] [PATCH v2 14/16] sandbox: spi: Remove an incorrect free()
Simon Glass
- [U-Boot] [PATCH v2 15/16] spi: Correct two error return values
Simon Glass
- [U-Boot] [PATCH v2 16/16] spi: Re-enable the SPI flash tests
Simon Glass
- [U-Boot] [RFC PATCH v5 1/4] common: Convert ulong to phys_addr_t for image addresses
Simon Glass
- [U-Boot] [PATCH 8/9] Allow command-line files to be dropped
Simon Glass
- [U-Boot] [PATCH 6/9] Hang when no command line processing can be performed
Simon Glass
- [U-Boot] [RFC PATCH v5 1/4] common: Convert ulong to phys_addr_t for image addresses
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Simon Glass
- [U-Boot] [PATCH 02/30] dm: pci: Break out the common region display code
Simon Glass
- [U-Boot] [PATCH 03/30] dm: part: Correct a sandbox build warning
Simon Glass
- [U-Boot] [PATCH 14/30] dm: part: Convert partition API use to linker lists
Simon Glass
- [U-Boot] [PATCH 15/30] dm: part: Rename some partition functions
Simon Glass
- [U-Boot] [PATCH 16/30] dm: cbfs: Fix handling of invalid type
Simon Glass
- [U-Boot] [PATCH 18/30] dm: block: Rename device number member dev to devnum
Simon Glass
- [U-Boot] [PATCH 24/30] dm: sandbox: Add driver-model block-device support for sandbox
Simon Glass
- [U-Boot] [PATCH 00/30] dm: Add driver-model support for block drivers
Simon Glass
- [U-Boot] [PATCH 00/30] dm: Add driver-model support for block drivers
Simon Glass
- [U-Boot] [PATCH 01/12] x86: Move asm/arch-coreboot/tables.h to a common place
Simon Glass
- [U-Boot] [PATCH 02/12] x86: Move sysinfo related to sysinfo.h
Simon Glass
- [U-Boot] [PATCH 03/12] x86: Clean up coreboot_tables.h
Simon Glass
- [U-Boot] [PATCH 04/12] x86: Change to use start/end address pair in write_tables()
Simon Glass
- [U-Boot] [PATCH 05/12] x86: Use a macro for ROM table alignment
Simon Glass
- [U-Boot] [PATCH 06/12] x86: Change write_acpi_tables() signature a little bit
Simon Glass
- [U-Boot] [PATCH 07/12] x86: Simplify codes in write_tables()
Simon Glass
- [U-Boot] [PATCH 08/12] x86: Support writing configuration tables in high area
Simon Glass
- [U-Boot] [PATCH 09/12] x86: Implement functions for writing coreboot table
Simon Glass
- [U-Boot] [PATCH 11/12] x86: qemu: Enable ACPI table generation by default
Simon Glass
- [U-Boot] [PATCH 12/12] x86: Document how to play with SeaBIOS
Simon Glass
- [U-Boot] [PATCH v2 00/25] exynos: video: Convert exynos LCD driver to use driver model
Simon Glass
- [U-Boot] [PATCH 14/30] dm: part: Convert partition API use to linker lists
Simon Glass
- [U-Boot] [PATCH v2 00/32] dm: Add driver-model support for block drivers
Simon Glass
- [U-Boot] [PATCH] dm: ns16550: Add support for reg-offset property
Simon Glass
- [U-Boot] [PATCH v2 01/32] dm: Drop the block_dev_desc_t typedef
Simon Glass
- [U-Boot] [PATCH v2 02/32] dm: pci: Break out the common region display code
Simon Glass
- [U-Boot] [PATCH v2 03/32] dm: part: Correct a sandbox build warning
Simon Glass
- [U-Boot] [PATCH v2 04/32] dm: fdtdec: Correct a sandbox build warning
Simon Glass
- [U-Boot] [PATCH v2 05/32] dm: part: Drop the common.h header
Simon Glass
- [U-Boot] [PATCH v2 06/32] dm: Add a new header for block devices
Simon Glass
- [U-Boot] [PATCH v2 07/32] dm: blk: Convert interface type to an enum
Simon Glass
- [U-Boot] [PATCH v2 08/32] dm: blk: Add comments to a few functions
Simon Glass
- [U-Boot] [PATCH v2 09/32] dm: blk: Rename get_dev() to blk_get_dev()
Simon Glass
- [U-Boot] [PATCH v2 10/32] dm: blk: Rename get_device() to blk_get_device_by_str()
Simon Glass
- [U-Boot] [PATCH v2 11/32] dm: blk: Rename get_device_and_partition()
Simon Glass
- [U-Boot] [PATCH v2 12/32] dm: part: Add a cast to avoid a compiler warning
Simon Glass
- [U-Boot] [PATCH v2 13/32] dm: sandbox: Enable all partition types
Simon Glass
- [U-Boot] [PATCH v2 14/32] dm: part: Convert partition API use to linker lists
Simon Glass
- [U-Boot] [PATCH v2 15/32] dm: part: Rename some partition functions
Simon Glass
- [U-Boot] [PATCH v2 16/32] dm: cbfs: Fix handling of invalid type
Simon Glass
- [U-Boot] [PATCH v2 17/32] dm: sandbox: Enable cbfs and cramfs
Simon Glass
- [U-Boot] [PATCH v2 18/32] dm: block: Rename device number member dev to devnum
Simon Glass
- [U-Boot] [PATCH v2 19/32] dm: block: Adjust device calls to go through helpers function
Simon Glass
- [U-Boot] [PATCH v2 20/32] dm: usb: Avoid exceeding available array size for storage devices
Simon Glass
- [U-Boot] [PATCH v2 21/32] dm: usb: Tidy up storage code ready for driver model conversion
Simon Glass
- [U-Boot] [PATCH v2 22/32] dm: blk: Add a block-device uclass
Simon Glass
- [U-Boot] [PATCH v2 23/32] dm: sandbox: Prepare block driver for driver-model conversion
Simon Glass
- [U-Boot] [PATCH v2 24/32] dm: sandbox: Add driver-model block-device support for sandbox
Simon Glass
- [U-Boot] [PATCH v2 25/32] dm: usb: Convert USB storage to use driver-model for block devs
Simon Glass
- [U-Boot] [PATCH v2 26/32] dm: usb: Unbind old block devices when shutting down USB
Simon Glass
- [U-Boot] [PATCH v2 27/32] dm: sandbox: Switch over to use DM for block devices
Simon Glass
- [U-Boot] [PATCH v2 28/32] dm: sandbox: Drop the pre-DM host implementation
Simon Glass
- [U-Boot] [PATCH v2 29/32] dm: usb: Clean up USB after each test
Simon Glass
- [U-Boot] [PATCH v2 30/32] dm: blk: Add tests for block devices
Simon Glass
- [U-Boot] [PATCH v2 31/32] part: Rename test_part_xx() and print_part_xx()
Simon Glass
- [U-Boot] [PATCH v2 32/32] Drop CONFIG_CRAMFS_CMDLINE
Simon Glass
- [U-Boot] [PATCH] Revert "common/memsize.c: Simplify RAM size detection"
Hans de Goede
- [U-Boot] [PATCH] sunxi: power: add support for sy8106a driver
Hans de Goede
- [U-Boot] [PATCH] Revert "common/memsize.c: Simplify RAM size detection"
Hans de Goede
- [U-Boot] [PATCH] sunxi: H3: Add support for the host usb-phys
Hans de Goede
- [U-Boot] GSoC projects for Minnowboard MAX
Hans de Goede
- [U-Boot] [PATCH v2] sunxi: power: add support for sy8106a driver
Hans de Goede
- [U-Boot] [PATCH] sunxi: H3: Add support for the host usb-phys
Hans de Goede
- [U-Boot] Please pull u-boot-sunxi master
Hans de Goede
- [U-Boot] [Patch V3 2/3] fm: fdt: Move fman ucode fixup to Fman driver code
Qianyu Gong
- [U-Boot] [Patch V3 2/3] fm: fdt: Move fman ucode fixup to Fman driver code
Qianyu Gong
- [U-Boot] [PATCH] ARM: start.S: fix typo
Yuichiro Goto
- [U-Boot] [PATCH] exynos: Set CNTFRQ
Alexander Graf
- [U-Boot] [PATCH 00/14] EFI payload / application support v2
Alexander Graf
- [U-Boot] [PATCH 02/14] include/efi_api.h: Add more detailed API definitions
Alexander Graf
- [U-Boot] [PATCH 03/14] efi_loader: Add PE image loader
Alexander Graf
- [U-Boot] [PATCH 04/14] efi_loader: Add boot time services
Alexander Graf
- [U-Boot] [PATCH 06/14] efi_loader: Add runtime services
Alexander Graf
- [U-Boot] [PATCH 04/14] efi_loader: Add boot time services
Alexander Graf
- [U-Boot] [PATCH 00/14] EFI payload / application support v2
Alexander Graf
- [U-Boot] [PATCH 07/14] efi_loader: Add disk interfaces
Alexander Graf
- [U-Boot] [PATCH 09/14] efi_loader: Implement memory allocation and map
Alexander Graf
- [U-Boot] [PATCH 14/14] efi_loader: Add distro boot script for removable media
Alexander Graf
- [U-Boot] [PATCH 04/14] efi_loader: Add boot time services
Alexander Graf
- [U-Boot] [PATCH 00/16] EFI payload / application support v3
Alexander Graf
- [U-Boot] [PATCH 01/16] disk/part.c: Expose list of available block drivers
Alexander Graf
- [U-Boot] [PATCH 02/16] include/efi_api.h: Add more detailed API definitions
Alexander Graf
- [U-Boot] [PATCH 03/16] efi_loader: Add PE image loader
Alexander Graf
- [U-Boot] [PATCH 04/16] efi_loader: Add boot time services
Alexander Graf
- [U-Boot] [PATCH 05/16] efi_loader: Add console interface
Alexander Graf
- [U-Boot] [PATCH 06/16] efi_loader: Add runtime services
Alexander Graf
- [U-Boot] [PATCH 07/16] efi_loader: Add disk interfaces
Alexander Graf
- [U-Boot] [PATCH 08/16] efi_loader: Add "bootefi" command
Alexander Graf
- [U-Boot] [PATCH 09/16] efi_loader: Implement memory allocation and map
Alexander Graf
- [U-Boot] [PATCH 10/16] arm64: Allow exceptions to return
Alexander Graf
- [U-Boot] [PATCH 11/16] arm64: Allow EFI payload code to take exceptions
Alexander Graf
- [U-Boot] [PATCH 12/16] efi_loader: Add DCACHE_OFF support for arm64
Alexander Graf
- [U-Boot] [PATCH 13/16] efi_loader: hook up in build environment
Alexander Graf
- [U-Boot] [PATCH 14/16] efi_loader: Add distro boot script for removable media
Alexander Graf
- [U-Boot] [PATCH 15/16] efi_loader: Add README section in README.efi
Alexander Graf
- [U-Boot] [PATCH 16/16] efi_loader: Add MAINTAINERS entry
Alexander Graf
- [U-Boot] [PATCH 12/16] efi_loader: Add DCACHE_OFF support for arm64
Alexander Graf
- [U-Boot] [PATCH 14/16] efi_loader: Add distro boot script for removable media
Alexander Graf
- [U-Boot] [PATCH 0/9] arm64: Unify MMU code
Alexander Graf
- [U-Boot] [PATCH 1/9] thunderx: Calculate TCR dynamically
Alexander Graf
- [U-Boot] [PATCH 2/9] arm64: Make full va map code more dynamic
Alexander Graf
- [U-Boot] [PATCH 3/9] zymqmp: Replace home grown mmu code with generic table approach
Alexander Graf
- [U-Boot] [PATCH 4/9] tegra: Replace home grown mmu code with generic table approach
Alexander Graf
- [U-Boot] [PATCH 5/9] vexpress64: Add MMU tables
Alexander Graf
- [U-Boot] [PATCH 6/9] dwmmc: Increase retry timeout
Alexander Graf
- [U-Boot] [PATCH 7/9] hikey: Add MMU tables
Alexander Graf
- [U-Boot] [PATCH 8/9] arm64: Remove non-full-va map code
Alexander Graf
- [U-Boot] [PATCH 9/9] arm64: Only allow dcache disabled in SPL builds
Alexander Graf
- [U-Boot] [PATCH 0/9] arm64: Unify MMU code
Alexander Graf
- [U-Boot] [PATCH 0/9] arm64: Unify MMU code
Alexander Graf
- [U-Boot] [PATCH 2/9] arm64: Make full va map code more dynamic
Alexander Graf
- [U-Boot] [PATCH 0/9] arm64: Unify MMU code
Alexander Graf
- [U-Boot] [PATCH 0/9] arm64: Unify MMU code
Alexander Graf
- [U-Boot] [PATCH 3/9] zymqmp: Replace home grown mmu code with generic table approach
Alexander Graf
- [U-Boot] [PATCH 0/9] arm64: Unify MMU code
Alexander Graf
- [U-Boot] [PATCH 2/9] arm64: Make full va map code more dynamic
Alexander Graf
- [U-Boot] [PATCH 4/9] tegra: Replace home grown mmu code with generic table approach
Alexander Graf
- [U-Boot] [PATCH 0/9] arm64: Unify MMU code
Alexander Graf
- [U-Boot] [PATCH 2/9] arm64: Make full va map code more dynamic
Alexander Graf
- [U-Boot] [PATCH 00/10] arm64: Unify MMU code
Alexander Graf
- [U-Boot] [PATCH 01/10] thunderx: Calculate TCR dynamically
Alexander Graf
- [U-Boot] [PATCH 02/10] arm64: Make full va map code more dynamic
Alexander Graf
- [U-Boot] [PATCH 03/10] thunderx: Move mmu table into board file
Alexander Graf
- [U-Boot] [PATCH 04/10] zymqmp: Replace home grown mmu code with generic table approach
Alexander Graf
- [U-Boot] [PATCH 05/10] tegra: Replace home grown mmu code with generic table approach
Alexander Graf
- [U-Boot] [PATCH 06/10] vexpress64: Add MMU tables
Alexander Graf
- [U-Boot] [PATCH 07/10] dwmmc: Increase retry timeout
Alexander Graf
- [U-Boot] [PATCH 08/10] hikey: Add MMU tables
Alexander Graf
- [U-Boot] [PATCH 09/10] arm64: Remove non-full-va map code
Alexander Graf
- [U-Boot] [PATCH 10/10] arm64: Only allow dcache disabled in SPL builds
Alexander Graf
- [U-Boot] [PATCH 00/10] arm64: Unify MMU code
Alexander Graf
- [U-Boot] [PATCH 2/9] arm64: Make full va map code more dynamic
Alexander Graf
- [U-Boot] [PATCH 01/10] thunderx: Calculate TCR dynamically
Alexander Graf
- [U-Boot] [PATCH 02/10] arm64: Make full va map code more dynamic
Alexander Graf
- [U-Boot] [PATCH v3 00/11] arm64: Unify MMU code v3
Alexander Graf
- [U-Boot] [PATCH v3 01/11] thunderx: Calculate TCR dynamically
Alexander Graf
- [U-Boot] [PATCH v3 02/11] arm64: Disable TTBR1 maps in EL1
Alexander Graf
- [U-Boot] [PATCH v3 03/11] arm64: Make full va map code more dynamic
Alexander Graf
- [U-Boot] [PATCH v3 04/11] thunderx: Move mmu table into board file
Alexander Graf
- [U-Boot] [PATCH v3 05/11] zymqmp: Replace home grown mmu code with generic table approach
Alexander Graf
- [U-Boot] [PATCH v3 06/11] tegra: Replace home grown mmu code with generic table approach
Alexander Graf
- [U-Boot] [PATCH v3 07/11] vexpress64: Add MMU tables
Alexander Graf
- [U-Boot] [PATCH v3 08/11] dwmmc: Increase retry timeout
Alexander Graf
- [U-Boot] [PATCH v3 09/11] hikey: Add MMU tables
Alexander Graf
- [U-Boot] [PATCH v3 10/11] arm64: Remove non-full-va map code
Alexander Graf
- [U-Boot] [PATCH v3 11/11] arm64: Only allow dcache disabled in SPL builds
Alexander Graf
- [U-Boot] [PATCH 3/9] zymqmp: Replace home grown mmu code with generic table approach
Alexander Graf
- [U-Boot] [PATCH v4 00/11] arm64: Unify MMU code v3
Alexander Graf
- [U-Boot] [PATCH v4 01/11] thunderx: Calculate TCR dynamically
Alexander Graf
- [U-Boot] [PATCH v4 02/11] arm64: Disable TTBR1 maps in EL1
Alexander Graf
- [U-Boot] [PATCH v4 03/11] arm64: Make full va map code more dynamic
Alexander Graf
- [U-Boot] [PATCH v4 04/11] thunderx: Move mmu table into board file
Alexander Graf
- [U-Boot] [PATCH v4 05/11] zymqmp: Replace home grown mmu code with generic table approach
Alexander Graf
- [U-Boot] [PATCH v4 06/11] tegra: Replace home grown mmu code with generic table approach
Alexander Graf
- [U-Boot] [PATCH v4 07/11] vexpress64: Add MMU tables
Alexander Graf
- [U-Boot] [PATCH v4 08/11] dwmmc: Increase retry timeout
Alexander Graf
- [U-Boot] [PATCH v4 09/11] hikey: Add MMU tables
Alexander Graf
- [U-Boot] [PATCH v4 10/11] arm64: Remove non-full-va map code
Alexander Graf
- [U-Boot] [PATCH v4 11/11] arm64: Only allow dcache disabled in SPL builds
Alexander Graf
- [U-Boot] [PATCH 04/16] efi_loader: Add boot time services
Alexander Graf
- [U-Boot] [PATCH 03/16] efi_loader: Add PE image loader
Alexander Graf
- [U-Boot] [PATCH 14/16] efi_loader: Add distro boot script for removable media
Alexander Graf
- [U-Boot] [PATCH v4 00/15] EFI payload / application support
Alexander Graf
- [U-Boot] [PATCH v4 01/15] disk/part.c: Expose list of available block drivers
Alexander Graf
- [U-Boot] [PATCH v4 02/15] include/efi_api.h: Add more detailed API definitions
Alexander Graf
- [U-Boot] [PATCH v4 03/15] efi_loader: Add PE image loader
Alexander Graf
- [U-Boot] [PATCH v4 04/15] efi_loader: Add boot time services
Alexander Graf
- [U-Boot] [PATCH v4 05/15] efi_loader: Add console interface
Alexander Graf
- [U-Boot] [PATCH v4 06/15] efi_loader: Add runtime services
Alexander Graf
- [U-Boot] [PATCH v4 07/15] efi_loader: Add disk interfaces
Alexander Graf
- [U-Boot] [PATCH v4 08/15] efi_loader: Add "bootefi" command
Alexander Graf
- [U-Boot] [PATCH v4 09/15] efi_loader: Implement memory allocation and map
Alexander Graf
- [U-Boot] [PATCH v4 10/15] arm64: Allow exceptions to return
Alexander Graf
- [U-Boot] [PATCH v4 11/15] arm64: Allow EFI payload code to take exceptions
Alexander Graf
- [U-Boot] [PATCH v4 12/15] efi_loader: hook up in build environment
Alexander Graf
- [U-Boot] [PATCH v4 13/15] efi_loader: Add distro boot script for removable media
Alexander Graf
- [U-Boot] [PATCH v4 14/15] efi_loader: Add README section in README.efi
Alexander Graf
- [U-Boot] [PATCH v4 15/15] efi_loader: Add MAINTAINERS entry
Alexander Graf
- [U-Boot] [PATCH 3/9] zymqmp: Replace home grown mmu code with generic table approach
Alexander Graf
- [U-Boot] [PATCH v4 01/11] thunderx: Calculate TCR dynamically
Alexander Graf
- [U-Boot] [PATCH v4 01/11] thunderx: Calculate TCR dynamically
Alexander Graf
- [U-Boot] [PATCH 02/10] arm64: Make full va map code more dynamic
Alexander Graf
- [U-Boot] [PATCH] dm: ns16550: Add support for reg-offset property
Alexander Graf
- [U-Boot] [PATCH V2] OMAP3: Various: Update serial platdata to update reg_offset to 0
Alexander Graf
- [U-Boot] [PATCH 02/10] arm64: Make full va map code more dynamic
Alexander Graf
- [U-Boot] U-Boot 2016.01 on Hikey 96
Peter Griffin
- [U-Boot] [PATCH v3] imx: imx7 Support for Manufacturing Protection
Ruchika Gupta
- [U-Boot] [PATCH v2] Use correct spelling of "U-Boot"
Anatolij Gustschin
- [U-Boot] [PATCH 1/6] microblaze: Correct build error in eth-uclass.c
Anatolij Gustschin
- [U-Boot] [PATCH 2/6] cmd: Fix control bmp_display()
Anatolij Gustschin
- [U-Boot] [PATCH 3/6] video: Use 'int' for loop variables instead of short
Anatolij Gustschin
- [U-Boot] [PATCH 4/6] video: test: Adjust order of file closure
Anatolij Gustschin
- [U-Boot] [PATCH 5/6] bzlib: Try another way to fix an unused variable
Anatolij Gustschin
- [U-Boot] [PATCH 6/6] rockchip: Drop old CONFIG_VIDEO_ROTATION option
Anatolij Gustschin
- [U-Boot] [PATCH V2] fdt: introduce fdtdec_get_child_count
Anatolij Gustschin
- [U-Boot] [PATCH] net: fix wrong initialization in davinci-emac driver
Anatolij Gustschin
- [U-Boot] [PATCH] net: fix wrong initialization in davinci-emac driver
Anatolij Gustschin
- [U-Boot] [PATCH] ppc: xilinx-ppc405-generic
Anatolij Gustschin
- [U-Boot] [PATCH v3] net: davinci_emac: fix NULL check after pointer dereference
Anatolij Gustschin
- [U-Boot] [PATCH v3] net: davinci_emac: fix NULL check after pointer dereference
Anatolij Gustschin
- [U-Boot] [PATCH] video: bcm2835: use bus_to_phys() on FB address
Anatolij Gustschin
- [U-Boot] Pull request: u-boot-staging
Anatolij Gustschin
- [U-Boot] [PATCH 1/2] dm: video: Add a temporary work-around for old stdout var
Anatolij Gustschin
- [U-Boot] [PATCH 2/2] video: tegra: Enable the 'lcd' env variable work-around
Anatolij Gustschin
- [U-Boot] [PATCH 1/2] dm: video: Add a temporary work-around for old stdout var
Anatolij Gustschin
- [U-Boot] [PATCH 2/2] video: tegra: Enable the 'lcd' env variable work-around
Anatolij Gustschin
- [U-Boot] Pull request: u-boot-video/master
Anatolij Gustschin
- [U-Boot] [PATCH] video: tegra: Correct a Kconfig warning with VIDCONSOLE_AS_LCD
Anatolij Gustschin
- [U-Boot] [PATCH 4/4] pci_rom: fix may be used uninitialized warning
Anatolij Gustschin
- [U-Boot] [PATCH 01/10] video: Add S3C24xx framebuffer support
Anatolij Gustschin
- [U-Boot] [PATCH 1/2] video: truetype: Fix a memory leak on error
Anatolij Gustschin
- [U-Boot] [PATCH 2/2] video: freetype: Fix a memory leak with a bad parameter
Anatolij Gustschin
- [U-Boot] [PATCH v2 01/25] exynos: video: Move driver files into their own directory
Anatolij Gustschin
- [U-Boot] [PATCH v2 02/25] exynos: video: Drop dead code
Anatolij Gustschin
- [U-Boot] [PATCH v2 02/25] exynos: video: Drop dead code
Anatolij Gustschin
- [U-Boot] [PATCH v2 03/25] exynos: video: Remove use of vidinfo_t typedef
Anatolij Gustschin
- [U-Boot] [PATCH v2 04/25] exynos: video: Drop the static lcd_base_addr variable
Anatolij Gustschin
- [U-Boot] [PATCH v2 05/25] exynos: video: Drop static variables in exynos_fimd.c
Anatolij Gustschin
- [U-Boot] [PATCH v2 06/25] exynos: video: Drop static variables in exynos_fb.c
Anatolij Gustschin
- [U-Boot] [PATCH v2 07/25] exynos: video: Drop static variables in exynos_dp_lowlevel.c
Anatolij Gustschin
- [U-Boot] [PATCH v2 08/25] exynos: video: Move dsim_config_dt into a function
Anatolij Gustschin
- [U-Boot] [PATCH v2 09/25] exynos: video: Move struct exynos_platform_mipi_dsim into vidinfo
Anatolij Gustschin
- [U-Boot] [PATCH v2 10/25] exynos: video: Move mipi_lcd_device_dt into a function
Anatolij Gustschin
- [U-Boot] [PATCH v2 11/25] exynos: video: Combine LCD driver into one file
Anatolij Gustschin
- [U-Boot] [PATCH v2 13/25] video: Add an enum for active low/high
Anatolij Gustschin
- [U-Boot] [PATCH v2 22/25] exynos: video: Rename edp_device_info to exynos_dp_priv
Anatolij Gustschin
- [U-Boot] [PATCH v2 23/25] exynos: video: Rename variables for driver model
Anatolij Gustschin
- [U-Boot] [PATCH v2 24/25] exynos: video: Convert several boards to driver model for video
Anatolij Gustschin
- [U-Boot] [PATCH v2 25/25] exynos: video: Drop old unused code
Anatolij Gustschin
- [U-Boot] [PATCH 01/10] video: Add S3C24xx framebuffer support
Anatolij Gustschin
- [U-Boot] Pull request: u-boot-video/master
Anatolij Gustschin
- [U-Boot] Wacky vlan IP format in env_flags.h ?
Peter Hanson
- [U-Boot] [PATCH] armv8/ls2080ardb: Enable VID support
Rai Harninder
- [U-Boot] [PATCH][v2] armv8/ls2080ardb: Enable VID support
Rai Harninder
- [U-Boot] [PATCH][v3] armv8/ls2080ardb: Enable VID support
Rai Harninder
- [U-Boot] [PATCH 2/4] mxsboot: remove unused include
Michael Heimpold
- [U-Boot] I need help linking a standalone program
Jason Hendrix
- [U-Boot] [PATCH 1/6] microblaze: Correct build error in eth-uclass.c
Joe Hershberger
- [U-Boot] Wacky vlan IP format in env_flags.h ?
Joe Hershberger
- [U-Boot] [PATCH 2/2] net: phy: marvell: Fix problem with phy_reset() clearing BMCR
Joe Hershberger
- [U-Boot] [PATCH 1/2] net: phy: marvell: Call phy_reset() where possible
Joe Hershberger
- [U-Boot] [PATCH] usb: eth: fix memalign() parameter order
Joe Hershberger
- [U-Boot] [PATCH 1/6] net: gem: Add support for reading MAC from I2C EEPROM
Joe Hershberger
- [U-Boot] [PATCH 1/6] net: gem: Add support for reading MAC from I2C EEPROM
Joe Hershberger
- [U-Boot] [PATCH 1/6] net: gem: Add support for reading MAC from I2C EEPROM
Joe Hershberger
- [U-Boot] [PATCH 1/6] net: gem: Add support for reading MAC from I2C EEPROM
Joe Hershberger
- [U-Boot] net: phy: marvell: Fix problem with phy_reset() clearing BMCR
Joe Hershberger
- [U-Boot] net: phy: marvell: Call phy_reset() where possible
Joe Hershberger
- [U-Boot] Pull request: u-boot-net.git master
Joe Hershberger
- [U-Boot] [PATCH] net: phy: atheros: Fix problem with phy_reset() clearing BMCR
Joe Hershberger
- [U-Boot] net: bootp: Add environment variable for timeout period
Joe Hershberger
- [U-Boot] net: phy: atheros: Fix problem with phy_reset() clearing BMCR
Joe Hershberger
- [U-Boot] Pull request: u-boot-net.git master
Joe Hershberger
- [U-Boot] [PATCH v2] armv8/ls1043a: Implement workaround for erratum A009660
Mingkai Hu
- [U-Boot] [PATCH] armv8/ls1043a: Implement workaround for erratum A009660
Mingkai Hu
- [U-Boot] [PATCH v4 2/4] QE: add QE support on ls1043ardb
Mingkai Hu
- [U-Boot] [PATCH v4 4/4] qe: assgin pins to qe-hdlc
Mingkai Hu
- [U-Boot] [PATCH v4 3/4] ls1043rdb: move USB mux config to config_board_mux
Mingkai Hu
- [U-Boot] [PATCH v3] armv8/ls1043a: Implement workaround for erratum A009660
Mingkai Hu
- [U-Boot] uboot fdt commands
Damien Wei Huang
- [U-Boot] [PATCH v3 00/15] Add Support for Secure Boot on LS208x
Saksham Jain
- [U-Boot] [PATCH v3 01/15] armv8: ls2080: Add SFP Configs for LS2080/LS2085
Saksham Jain
- [U-Boot] [PATCH v3 02/15] armv8: ls2080: Add Secure Boot configs: SEC, Security Monitor, SRK and RCW
Saksham Jain
- [U-Boot] [PATCH v3 03/15] SECURE BOOT: Add new ESBC header for ls-ch3 Secure Boot
Saksham Jain
- [U-Boot] [PATCH v3 04/15] SECURE BOOT: Add Secure Boot support on ls2080aqds/rdb
Saksham Jain
- [U-Boot] [PATCH v3 05/15] armv8: fsl-lsch3: Add bootscript header address for Secure Boot
Saksham Jain
- [U-Boot] [PATCH v3 06/15] SECURE BOOT: Copy Bootscript and header from NOR to DDR for LS2080/5
Saksham Jain
- [U-Boot] [PATCH v3 07/15] SECURE BOOT: Change env variable "fdt_high" for LS2080a and LS2085a
Saksham Jain
- [U-Boot] [PATCH v3 08/15] armv8 : ls2080: Add config for endianess of CCSR GUR
Saksham Jain
- [U-Boot] [PATCH v3 09/15] armv8: fsl-lsch3: Disable SMMU during Secure Boot
Saksham Jain
- [U-Boot] [PATCH v3 10/15] crypto/fsl: Correct 64bit Write when MMU disabled
Saksham Jain
- [U-Boot] [PATCH v3 11/15] crypto/fsl: Make CAAM transactions cacheable
Saksham Jain
- [U-Boot] [PATCH v3 12/15] SECURE_BOOT: Use default bootargs during Secure Boot
Saksham Jain
- [U-Boot] [PATCH v3 13/15] SECURE BOOT: Halt execution when secure boot fail after reset request
Saksham Jain
- [U-Boot] [PATCH v3 14/15] SECURE BOOT: Change fsl_secboot_validate function to output image addr
Saksham Jain
- [U-Boot] [PATCH v3 15/15] SECURE_BOOT: Enable IE (Key extention) Feature in Ls2085a & LS2088a
Saksham Jain
- [U-Boot] [PATCH v4 00/14] Add Support for Secure Boot on LS208x
Saksham Jain
- [U-Boot] [PATCH v4 01/14] armv8: ls2080: Add SFP Configs for LS2080/LS2085
Saksham Jain
- [U-Boot] [PATCH v4 02/14] armv8: ls2080: Add Secure Boot configs: SEC, Security Monitor, SRK and RCW
Saksham Jain
- [U-Boot] [PATCH v4 03/14] SECURE BOOT: Add new ESBC header for ls-ch3 Secure Boot
Saksham Jain
- [U-Boot] [PATCH v4 04/14] SECURE BOOT: Add Secure Boot support on ls2080aqds/rdb
Saksham Jain
- [U-Boot] [PATCH v4 05/14] armv8: fsl-lsch3: Add bootscript header address for Secure Boot
Saksham Jain
- [U-Boot] [PATCH v4 06/14] SECURE BOOT: Copy Bootscript and header from NOR to DDR for LS2080/5
Saksham Jain
- [U-Boot] [PATCH v4 07/14] SECURE BOOT: Change env variable "fdt_high" for LS2080a and LS2085a
Saksham Jain
- [U-Boot] [PATCH v4 08/14] armv8 : ls2080: Add config for endianess of CCSR GUR
Saksham Jain
- [U-Boot] [PATCH v4 09/14] armv8: fsl-lsch3: Disable SMMU during Secure Boot
Saksham Jain
- [U-Boot] [PATCH v4 10/14] crypto/fsl: Correct 64bit Write when MMU disabled
Saksham Jain
- [U-Boot] [PATCH v4 11/14] crypto/fsl: Make CAAM transactions cacheable
Saksham Jain
- [U-Boot] [PATCH v4 12/14] SECURE_BOOT: Use default bootargs during Secure Boot
Saksham Jain
- [U-Boot] [PATCH v4 13/14] SECURE BOOT: Halt execution when secure boot fail after reset request
Saksham Jain
- [U-Boot] [PATCH v4 14/14] SECURE BOOT: Change fsl_secboot_validate function to output image addr
Saksham Jain
- [U-Boot] Issue with USB mass storage (thumb drives)
Maxime Jayat
- [U-Boot] [PATCH] armv8/ls2080ardb: Enable VID support
Calvin Johnson
- [U-Boot] Problem with mounting a jffs2 partition on flash.
Calvin Johnson
- [U-Boot] [PATCH] exynos: Set CNTFRQ
Minkyu Kang
- [U-Boot] [PATCH v2 00/25] exynos: video: Convert exynos LCD driver to use driver model
Minkyu Kang
- [U-Boot] [PATCH V5 0/7] ARM: omap-common: Add board detection support for TI EVMs
Steve Kipisz
- [U-Boot] [PATCH V5 1/7] ARM: OMAP4/5: Centralize early clock initialization
Steve Kipisz
- [U-Boot] [PATCH V5 2/7] ARM: OMAP4/5: Centralize gpi2c_init
Steve Kipisz
- [U-Boot] [PATCH V5 3/7] ARM: omap-common: Add standard access for board description EEPROM
Steve Kipisz
- [U-Boot] [PATCH V5 4/7] ti: AM335x: Use generic EEPROM detection logic
Steve Kipisz
- [U-Boot] [PATCH V5 5/7] ti: AM437x: Use generic EEPROM detection logic
Steve Kipisz
- [U-Boot] [PATCH V5 6/7] ARM: OMAP4/5: Add generic board detection hook
Steve Kipisz
- [U-Boot] [PATCH V5 7/7] board: ti: AM57xx: Add detection logic for AM57xx-evm
Steve Kipisz
- [U-Boot] [PATCH] spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS, if available
Nikita Kiryanov
- [U-Boot] [PATCH] spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS, if available
Nikita Kiryanov
- [U-Boot] [PATCH] spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS, if available
Nikita Kiryanov
- [U-Boot] [PATCH] spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS, if available
Nikita Kiryanov
- [U-Boot] [PATCH] spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS, if available
Nikita Kiryanov
- [U-Boot] [PATCH V2] spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS
Nikita Kiryanov
- [U-Boot] [PATCH 00/10] cm-t43 maintenance
Nikita Kiryanov
- [U-Boot] [PATCH 01/10] arm: am437x: cm-t43: fix cm-t43 boot
Nikita Kiryanov
- [U-Boot] [PATCH 02/10] arm: am437x: cm-t43: migrate CONFIG_DM_SERIAL to config file
Nikita Kiryanov
- [U-Boot] [PATCH 03/10] arm: am437x: cm-t43: support all available SPI flash chips
Nikita Kiryanov
- [U-Boot] [PATCH 04/10] arm: am437x: cm-t43: define prompt
Nikita Kiryanov
- [U-Boot] [PATCH 05/10] arm: am437x: cm-t43: split board file
Nikita Kiryanov
- [U-Boot] [PATCH 06/10] pmic: tps65218: add useful functions and defines
Nikita Kiryanov
- [U-Boot] [PATCH 07/10] arm: am437x: cm-t43: set tps fseal bit
Nikita Kiryanov
- [U-Boot] [PATCH 08/10] arm: am437x: cm-t43: get rid of enable_vtt_regulator()
Nikita Kiryanov
- [U-Boot] [PATCH 09/10] arm: am437x: cm-t43: set MPU and CORE voltages on boot
Nikita Kiryanov
- [U-Boot] [PATCH 10/10] arm: am437x: cm-t43: update parameters for raw mmc boot
Nikita Kiryanov
- [U-Boot] [PATCH] arm: am437x: cm-t43: bring back BOOTDELAY feature
Nikita Kiryanov
- [U-Boot] [PATCH] sniper: Drop references to P970
Paul Kocialkowski
- [U-Boot] [PATCH] sniper: Various minor cleanups, missing Kconfig configs and reorganisation
Paul Kocialkowski
- [U-Boot] [PATCH 0/27] Amazon Kindle Fire (first generation) codename kc1 support series
Paul Kocialkowski
- [U-Boot] [PATCH 01/27] power: twl6030: Some more explicit registers and values definitions
Paul Kocialkowski
- [U-Boot] [PATCH 02/27] power: twl6030: Enable VAUX1 for eMMC power, depending on BOOT2 value
Paul Kocialkowski
- [U-Boot] [PATCH 03/27] power: twl6030: Device-index-specific MMC power initialization
Paul Kocialkowski
- [U-Boot] [PATCH 04/27] omap_hsmmc: Board-specific TWL6030 MMC power initialization
Paul Kocialkowski
- [U-Boot] [PATCH 05/27] omap4: Export elpidia sdram device details
Paul Kocialkowski
- [U-Boot] [PATCH 06/27] omap4: Export elpidia sdram timings
Paul Kocialkowski
- [U-Boot] [PATCH 07/27] omap4: Export jedec sdram timings
Paul Kocialkowski
- [U-Boot] [PATCH 08/27] omap-common: Rename set_muxconf_regs_essential to set_muxconf_regs
Paul Kocialkowski
- [U-Boot] [PATCH 09/27] omap-common: Remove deprecated arch_cpu_init code
Paul Kocialkowski
- [U-Boot] [PATCH 10/27] omap4: Remove duplicate CM_L3INIT_USBPHY_CLKCTRL reference and whitespace
Paul Kocialkowski
- [U-Boot] [PATCH 11/27] omap4: Move i2c clocks enable to enable_basic_clocks
Paul Kocialkowski
- [U-Boot] [PATCH 12/27] Amazon Kindle Fire (first generation) codename kc1 support
Paul Kocialkowski
- [U-Boot] [PATCH 13/27] omap-common: clocks-common: Setup USB DPLL when MUSB is in use
Paul Kocialkowski
- [U-Boot] [PATCH 14/27] omap4: Properly enable USB PHY clocks
Paul Kocialkowski
- [U-Boot] [PATCH 15/27] power: twl6030: Configure VUSB voltage on USB device setup
Paul Kocialkowski
- [U-Boot] [PATCH 16/27] power: twl6030: Clear VUSB_IN_PMID bit on USB device setup
Paul Kocialkowski
- [U-Boot] [PATCH 17/27] usb: musb-new: omap2430: OMAP4 MUSB USB controller support
Paul Kocialkowski
- [U-Boot] [PATCH 18/27] kc1: MUSB USB controller and fastboot USB gadget support
Paul Kocialkowski
- [U-Boot] [PATCH 19/27] omap4: Reboot mode support
Paul Kocialkowski
- [U-Boot] [PATCH 20/27] omap4: Check warm reset for reboot mode validity
Paul Kocialkowski
- [U-Boot] [PATCH 21/27] kc1: OMAP4 reboot mode support
Paul Kocialkowski
- [U-Boot] [PATCH 22/27] kc1: Boot to bootloader (fastboot) on ID pin pull-up
Paul Kocialkowski
- [U-Boot] [PATCH 23/27] power: twl6030: Remove ifdef around the code
Paul Kocialkowski
- [U-Boot] [PATCH 24/27] power: twl6030: Power off support
Paul Kocialkowski
- [U-Boot] [PATCH 25/27] input: TWL6030 input support for power button, USB and charger
Paul Kocialkowski
- [U-Boot] [PATCH 26/27] kc1: Power off when the power on reason is not a valid one
Paul Kocialkowski
- [U-Boot] [PATCH 27/27] kc1: Clear reboot mode garbage on cold reset
Paul Kocialkowski
- [U-Boot] [PATCH 0/4] omap and sniper reboot mode fixes and cleanups
Paul Kocialkowski
- [U-Boot] [PATCH 1/4] omap3: String-based reboot mode handling
Paul Kocialkowski
- [U-Boot] [PATCH 2/4] omap3: Use a define for reboot reason offset
Paul Kocialkowski
- [U-Boot] [PATCH 3/4] sniper: Get rid of reset_misc
Paul Kocialkowski
- [U-Boot] [PATCH 4/4] sniper: Clear reboot mode garbage on cold reset
Paul Kocialkowski
- [U-Boot] U-Boot as first bootloader on Exynos platforms
Paul Kocialkowski
- [U-Boot] [PATCH] sunxi: power: add support for sy8106a driver
Peter Korsgaard
- [U-Boot] [PATCH v2 00/18] Add support for 96boards Dragonboard410C board
Mateusz Kulikowski
- [U-Boot] [PATCH v2 01/18] serial: Add support for Qualcomm serial port
Mateusz Kulikowski
- [U-Boot] [PATCH v2 02/18] gpio: Add support for Qualcomm gpio controller
Mateusz Kulikowski
- [U-Boot] [PATCH v2 03/18] mmc: Add support for Qualcomm SDHCI controller
Mateusz Kulikowski
- [U-Boot] [PATCH v2 04/18] ehci-hcd: Add init_after_reset
Mateusz Kulikowski
- [U-Boot] [PATCH v2 05/18] usb: ulpi: Add Kconfig options for ULPI
Mateusz Kulikowski
- [U-Boot] [PATCH v2 06/18] Migrate CONFIG_ULPI* to Kconfig
Mateusz Kulikowski
- [U-Boot] [PATCH v2 07/18] usb: Rename ehci-fsl.h to ehci-ci.h
Mateusz Kulikowski
- [U-Boot] [PATCH v2 08/18] usb: ehci-ci: Add missing registers.
Mateusz Kulikowski
- [U-Boot] [PATCH v2 09/18] ehci-ci.h: drop generic USBCMD fields
Mateusz Kulikowski
- [U-Boot] [PATCH v2 10/18] ehci: Add support for Qualcomm EHCI
Mateusz Kulikowski
- [U-Boot] [PATCH v2 11/18] drivers: Add SPMI bus uclass
Mateusz Kulikowski
- [U-Boot] [PATCH v2 12/18] spmi: Add sandbox test driver
Mateusz Kulikowski
- [U-Boot] [PATCH v2 13/18] drivers: spmi: Add support for Qualcomm SPMI bus driver
Mateusz Kulikowski
- [U-Boot] [PATCH v2 14/18] pmic: Add support for Qualcomm PM8916 PMIC
Mateusz Kulikowski
- [U-Boot] [PATCH v2 15/18] gpio: Add support for Qualcomm PM8916 gpios
Mateusz Kulikowski
- [U-Boot] [PATCH v2 16/18] arm: Add support for Qualcomm Snapdragon family
Mateusz Kulikowski
- [U-Boot] [PATCH v2 17/18] board: Add Qualcomm Dragonboard 410C support
Mateusz Kulikowski
- [U-Boot] [PATCH v2 18/18] Add myself as Snapdragon and SPMI maintainer
Mateusz Kulikowski
- [U-Boot] [PATCH v2 17/18] board: Add Qualcomm Dragonboard 410C support
Mateusz Kulikowski
- [U-Boot] [PATCH v2 02/18] gpio: Add support for Qualcomm gpio controller
Mateusz Kulikowski
- [U-Boot] [PATCH v2 13/18] drivers: spmi: Add support for Qualcomm SPMI bus driver
Mateusz Kulikowski
- [U-Boot] [PATCH v2 15/18] gpio: Add support for Qualcomm PM8916 gpios
Mateusz Kulikowski
- [U-Boot] [PATCH v2 16/18] arm: Add support for Qualcomm Snapdragon family
Mateusz Kulikowski
- [U-Boot] [PATCH v2 03/18] mmc: Add support for Qualcomm SDHCI controller
Mateusz Kulikowski
- [U-Boot] [PATCH] ls2-2085a: Increase default hugepage count
Ashish Kumar
- [U-Boot] [PATCH] ls2-2085a: Increase default hugepage count
Ashish Kumar
- [U-Boot] [PATCH 1/2] armv8: ls2080: Add mcinitcmd env variable in default env
Prabhakar Kushwaha
- [U-Boot] [PATCH 2/2] armv8: ls2080: Update bootcmd env variable
Prabhakar Kushwaha
- [U-Boot] [PATCH] armv8/ls2080ardb: Enable VID support
Prabhakar Kushwaha
- [U-Boot] [PATCH] armv8/ls2080ardb: Enable VID support
Prabhakar Kushwaha
- [U-Boot] [RFC] armv8: layerscape: Add support of u-boot device tree fix-up
Prabhakar Kushwaha
- [U-Boot] [PATCH] armv8/fsl-layerscape: add IFC fixup for LS1043A with QSPI enabled
Prabhakar Kushwaha
- [U-Boot] [RFC] armv8: layerscape: Add support of u-boot device tree fix-up
Prabhakar Kushwaha
- [U-Boot] [RFC] armv8: layerscape: Add support of u-boot device tree fix-up
Prabhakar Kushwaha
- [U-Boot] [PATCH 1/2][v2] driver: net: ldpaa_eth: Add support of PHY framework
Prabhakar Kushwaha
- [U-Boot] [PATCH 2/2][v2] armv8: ls2085a: Remove phy configuration from QDS and RDB
Prabhakar Kushwaha
- [U-Boot] [PATCH v2] net: bootp: Add environment variable for timeout period
LEMIEUX, SYLVAIN
- [U-Boot] [PATCH] arm: Add support for LEGO MINDSTORMS EV3
David Lechner
- [U-Boot] [PATCH v3 1/2] mx6: soc: Add ENET2 mac address support
Ye Li
- [U-Boot] [PATCH v3 2/2] imx: mx6sxsabreauto: Add support for mx6sx SABREAUTO board
Ye Li
- [U-Boot] [PATCH 7/7] pci/layerscape: set LUT and msi-map for discovered PCI devices
Minghuan Lian
- [U-Boot] [PATCH 7/7 v2] pci/layerscape: set LUT and msi-map for discovered PCI devices
Minghuan Lian
- [U-Boot] [PATCH 4/7 v2] pci/layerscape: add support for LUT
Minghuan Lian
- [U-Boot] [PATCH 03/16] efi_loader: Add PE image loader
Leif Lindholm
- [U-Boot] [PATCH 04/16] efi_loader: Add boot time services
Leif Lindholm
- [U-Boot] [PATCH 09/16] efi_loader: Implement memory allocation and map
Leif Lindholm
- [U-Boot] [PATCH 14/16] efi_loader: Add distro boot script for removable media
Leif Lindholm
- [U-Boot] [PATCH 14/16] efi_loader: Add distro boot script for removable media
Leif Lindholm
- [U-Boot] [PATCH 1/2] ARM: rpi: update memory layout env. var. documentation
Jonathan Liu
- [U-Boot] [PATCH 1/2] ARM: rpi: update memory layout env. var. documentation
Jonathan Liu
- [U-Boot] i.MX286 U-Boot fails with code HTLLCL0x8050100b
Stuart Longland
- [U-Boot] i.MX286 U-Boot fails with code HTLLCL0x8050100b
Stuart Longland
- [U-Boot] i.MX286 U-Boot fails with code HTLLCL0x8050100b
Stuart Longland
- [U-Boot] [PATCH] armv8/fsl-lsch2: fix sdhc clock frequency value
Yangbo Lu
- [U-Boot] [PATCH] arm: use common instructions applicable to armv7m & other arm archs
Vikas MANOCHA
- [U-Boot] [PATCH v2] arm: use common instructions applicable to armv7m & other arm archs
Vikas MANOCHA
- [U-Boot] [PATCH] serial: serial_stm32: move clock config from driver to board
Vikas MANOCHA
- [U-Boot] u-boot countdown too fast - USB host problems
MAtthias
- [U-Boot] [RFC PATCH v1] dfu: introduce dfu_mtd support
Lukasz Majewski
- [U-Boot] [RFC PATCH v2] dfu: allow get_medium_size() to return bigger medium sizes than 2GiB
Lukasz Majewski
- [U-Boot] [RFC PATCH v2] dfu: allow get_medium_size() to return bigger medium sizes than 2GiB
Lukasz Majewski
- [U-Boot] [GIT] Pull request: u-boot-dfu
Lukasz Majewski
- [U-Boot] [GIT] Pull request: u-boot-dfu
Lukasz Majewski
- [U-Boot] [GIT] Pull request: u-boot-dfu
Lukasz Majewski
- [U-Boot] [PATCH] fastboot: update error and warning messages
Lukasz Majewski
- [U-Boot] [PATCH] usb: gadget: composite: Correct recovery path for register
Lukasz Majewski
- [U-Boot] U-Boot as first bootloader on Exynos platforms
Lukasz Majewski
- [U-Boot] [PATCH v4 08/13] board: Add Microchip PIC32MZ[DA]-Starter-Kit board.
Purna Chandra Mandal
- [U-Boot] [PATCH v1 1/2] drivers: musb-new: Add USB DRC driver for Microchip PIC32 OTG controller.
Purna Chandra Mandal
- [U-Boot] [PATCH v1 2/2] board: pic32mzda: enable USB-host, USB-storage support.
Purna Chandra Mandal
- [U-Boot] [PATCH v1 1/2] drivers: musb-new: Add USB DRC driver for Microchip PIC32 OTG controller.
Purna Chandra Mandal
- [U-Boot] [PATCH v2] arm: use common instructions applicable to armv7m & other arm archs
Vikas Manocha
- [U-Boot] [PATCH v3] arm: use common instructions applicable to armv7m & other arm archs
Vikas Manocha
- [U-Boot] [PATCH 0/4] stm32: add stm32f7 family support
Vikas Manocha
- [U-Boot] [PATCH 1/4] gpio: stm32_gpio: move clock config from driver to board
Vikas Manocha
- [U-Boot] [PATCH 2/4] gpio: stm32_gpio: move base addresses to the soc file
Vikas Manocha
- [U-Boot] [PATCH 3/4] stm32x7: add support for stm32x7 serial driver
Vikas Manocha
- [U-Boot] [PATCH 4/4] stm32: add support for stm32f7 & stm32f746 discovery board
Vikas Manocha
- [U-Boot] [PATCH] fdt: __of_translate_address(): check parent's 'ranges' before translate
Przemyslaw Marczak
- [U-Boot] [PATCH 00/26] spl: Support loading a FIT image containing U-Boot
Belisko Marek
- [U-Boot] [PATCH 2/2] include:configs: Add usb device-tree fixup for all fsl platforms
Ramneek Mehresh
- [U-Boot] .travis.yml: rework according to new travis-ci infra
Meier, Roger
- [U-Boot] [PATCH 2/2] Enable test/py for sandbox in Travis CI
Meier, Roger
- [U-Boot] [PATCH 00/23] x86: Convert to use DM PCI APIs completely
Bin Meng
- [U-Boot] [PATCH 01/23] spi: ich: Some clean up
Bin Meng
- [U-Boot] [PATCH 02/23] spi: ich: Use compatible strings to distinguish controller version
Bin Meng
- [U-Boot] [PATCH 03/23] spi: ich: Change PCHV_ to ICHV_
Bin Meng
- [U-Boot] [PATCH 04/23] x86: tnc: Drop unprotect_spi_flash()
Bin Meng
- [U-Boot] [PATCH 05/23] x86: quark: Drop unprotect_spi_flash()
Bin Meng
- [U-Boot] [PATCH 06/23] dm: pch: Remove pch_get_version op
Bin Meng
- [U-Boot] [PATCH 07/23] dm: pch: Rename get_sbase op to get_spi_base
Bin Meng
- [U-Boot] [PATCH 08/23] dm: pch: Add get_gpio_base op
Bin Meng
- [U-Boot] [PATCH 09/23] x86: pch: Implement get_gpio_base op
Bin Meng
- [U-Boot] [PATCH 10/23] dm: pch: Add get_io_base op
Bin Meng
- [U-Boot] [PATCH 11/23] x86: pch9: Implement get_io_base op
Bin Meng
- [U-Boot] [PATCH 12/23] x86: ich6_gpio: Convert to use proper DM API
Bin Meng
- [U-Boot] [PATCH 13/23] x86: Drop asm/arch/gpio.h
Bin Meng
- [U-Boot] [PATCH 14/23] x86: minnowmax: Drop io-base property in the pch_pinctrl node
Bin Meng
- [U-Boot] [PATCH 15/23] x86: irq: Get irq_router's bdf via dm_pci_get_bdf()
Bin Meng
- [U-Boot] [PATCH 16/23] x86: irq: Move irq_router to a per driver priv
Bin Meng
- [U-Boot] [PATCH 17/23] x86: irq: Convert to use DM PCI API
Bin Meng
- [U-Boot] [PATCH 18/23] x86: tnc: Change disable_igd() to have a return value
Bin Meng
- [U-Boot] [PATCH 19/23] x86: tnc: Use DM PCI API in disable_igd()
Bin Meng
- [U-Boot] [PATCH 20/23] x86: tnc: Remove IGD and SDVO devices from driver model
Bin Meng
- [U-Boot] [PATCH 21/23] x86: qemu: Convert to use DM PCI API
Bin Meng
- [U-Boot] [PATCH 22/23] x86: pci: Use DM PCI APIs in pci_assign_irqs()
Bin Meng
- [U-Boot] [PATCH 23/23] x86: pci: Drop legacy PCI APIs
Bin Meng
- [U-Boot] [PATCH 00/23] x86: Convert to use DM PCI APIs completely
Bin Meng
- [U-Boot] patch for 64bit access issue found in FDT
Bin Meng
- [U-Boot] patch for 64bit access issue found in FDT
Bin Meng
- [U-Boot] [PATCH v1 1/2] Revert "powerpc: mpc85xx: remove P2020DS board support"
Bin Meng
- [U-Boot] [PATCH v1 1/2] Revert "powerpc: mpc85xx: remove P2020DS board support"
Bin Meng
- [U-Boot] [PATCH 00/23] x86: Convert to use DM PCI APIs completely
Bin Meng
- [U-Boot] 64-bit x86 U-Boot?
Bin Meng
- [U-Boot] [PATCH 00/11] x86: Disable DM_PCI_COMPAT
Bin Meng
- [U-Boot] [PATCH 01/11] net: pch_gbe: Convert to use DM PCI API
Bin Meng
- [U-Boot] [PATCH 02/11] net: designware: Use dm_pci_mem_to_phys() in the probe routine
Bin Meng
- [U-Boot] [PATCH 03/11] net: e1000: Convert to use DM PCI API
Bin Meng
- [U-Boot] [PATCH 04/11] x86: quark: Use Quark's own PCI config APIs
Bin Meng
- [U-Boot] [PATCH 05/11] efi: app: Clean up defconfig
Bin Meng
- [U-Boot] [PATCH 06/11] efi: app: Disable CONFIG_USB_EHCI_PCI
Bin Meng
- [U-Boot] [PATCH 07/11] x86: chromebox_panther: Drop the cache line size hack
Bin Meng
- [U-Boot] [PATCH 08/11] x86: chromebox_panther: Convert to use driver model ethernet
Bin Meng
- [U-Boot] [PATCH 09/11] dm: pci: Add missing forward declarations
Bin Meng
- [U-Boot] [PATCH 10/11] x86: Disable DM_PCI_COMPAT
Bin Meng
- [U-Boot] [PATCH 11/11] x86: Drop pci_type1.c and DEFINE_PCI_DEVICE_TABLE
Bin Meng
- [U-Boot] 64-bit x86 U-Boot?
Bin Meng
- [U-Boot] [PATCH 00/23] x86: Convert to use DM PCI APIs completely
Bin Meng
- [U-Boot] [PATCH 00/23] x86: Convert to use DM PCI APIs completely
Bin Meng
- [U-Boot] [PATCH 01/23] spi: ich: Some clean up
Bin Meng
- [U-Boot] [PATCH 02/23] spi: ich: Use compatible strings to distinguish controller version
Bin Meng
- [U-Boot] [PATCH 03/23] spi: ich: Change PCHV_ to ICHV_
Bin Meng
- [U-Boot] [PATCH 04/23] x86: tnc: Drop unprotect_spi_flash()
Bin Meng
- [U-Boot] [PATCH 05/23] x86: quark: Drop unprotect_spi_flash()
Bin Meng
- [U-Boot] [PATCH 06/23] dm: pch: Remove pch_get_version op
Bin Meng
- [U-Boot] [PATCH 07/23] dm: pch: Rename get_sbase op to get_spi_base
Bin Meng
- [U-Boot] [PATCH 08/23] dm: pch: Add get_gpio_base op
Bin Meng
- [U-Boot] [PATCH 09/23] x86: pch: Implement get_gpio_base op
Bin Meng
- [U-Boot] [PATCH 10/23] dm: pch: Add get_io_base op
Bin Meng
- [U-Boot] [PATCH 11/23] x86: pch9: Implement get_io_base op
Bin Meng
- [U-Boot] [PATCH 12/23] x86: ich6_gpio: Convert to use proper DM API
Bin Meng
- [U-Boot] [PATCH 13/23] x86: Drop asm/arch/gpio.h
Bin Meng
- [U-Boot] [PATCH 14/23] x86: minnowmax: Drop io-base property in the pch_pinctrl node
Bin Meng
- [U-Boot] [PATCH 15/23] x86: irq: Get irq_router's bdf via dm_pci_get_bdf()
Bin Meng
- [U-Boot] [PATCH 16/23] x86: irq: Move irq_router to a per driver priv
Bin Meng
- [U-Boot] [PATCH 17/23] x86: irq: Convert to use DM PCI API
Bin Meng
- [U-Boot] [PATCH 18/23] x86: tnc: Change disable_igd() to have a return value
Bin Meng
- [U-Boot] [PATCH 19/23] x86: tnc: Use DM PCI API in disable_igd()
Bin Meng
- [U-Boot] [PATCH 20/23] x86: tnc: Remove IGD and SDVO devices from driver model
Bin Meng
- [U-Boot] [PATCH 21/23] x86: qemu: Convert to use DM PCI API
Bin Meng
- [U-Boot] [PATCH 22/23] x86: pci: Use DM PCI APIs in pci_assign_irqs()
Bin Meng
- [U-Boot] [PATCH 23/23] x86: pci: Drop legacy PCI APIs
Bin Meng
- [U-Boot] 64-bit x86 U-Boot?
Bin Meng
- [U-Boot] [PATCH 01/11] net: pch_gbe: Convert to use DM PCI API
Bin Meng
- [U-Boot] [PATCH 02/11] net: designware: Use dm_pci_mem_to_phys() in the probe routine
Bin Meng
- [U-Boot] [PATCH 03/11] net: e1000: Convert to use DM PCI API
Bin Meng
- [U-Boot] [PATCH 04/11] x86: quark: Use Quark's own PCI config APIs
Bin Meng
- [U-Boot] [PATCH 05/11] efi: app: Clean up defconfig
Bin Meng
- [U-Boot] [PATCH 06/11] efi: app: Disable CONFIG_USB_EHCI_PCI
Bin Meng
- [U-Boot] [PATCH 07/11] x86: chromebox_panther: Drop the cache line size hack
Bin Meng
- [U-Boot] [PATCH 08/11] x86: chromebox_panther: Convert to use driver model ethernet
Bin Meng
- [U-Boot] [PATCH 09/11] dm: pci: Add missing forward declarations
Bin Meng
- [U-Boot] [PATCH 10/11] x86: Disable DM_PCI_COMPAT
Bin Meng
- [U-Boot] [PATCH 11/11] x86: Drop pci_type1.c and DEFINE_PCI_DEVICE_TABLE
Bin Meng
- [U-Boot] Please pull u-boot-x86
Bin Meng
- [U-Boot] 64-bit x86 U-Boot?
Bin Meng
- [U-Boot] [PATCH] board_r: fix a typo in comment block
Bin Meng
- [U-Boot] [PATCH v2] Use correct spelling of "U-Boot"
Bin Meng
- [U-Boot] Maintainers' email address not valid
Bin Meng
- [U-Boot] Maintainers' email address not valid
Bin Meng
- [U-Boot] [PATCH] openrisc: updating build tools naming convention
Bin Meng
- [U-Boot] [PATCH] x86: Clean up SPI flash drivers in defconfig
Bin Meng
- [U-Boot] [PATCH 01/10] fdtdec: Add compatible string for Intel IvyBridge FSP
Bin Meng
- [U-Boot] [PATCH v2 0/5] x86: ivybridge: Add Intel FSP support
Bin Meng
- [U-Boot] [PATCH v2 1/5] x86: ivybridge: Add FSP support
Bin Meng
- [U-Boot] [PATCH v2 2/5] superio: Add SMSC SIO1007 driver
Bin Meng
- [U-Boot] [PATCH v2 3/5] x86: fsp: Make sure HOB list is not overwritten by U-Boot
Bin Meng
- [U-Boot] [PATCH v2 4/5] x86: ivybridge: bd82x6x: Support FSP enabled configuration
Bin Meng
- [U-Boot] [PATCH v2 5/5] x86: Add Intel Cougar Canyon 2 board
Bin Meng
- [U-Boot] [PATCH 1/6] net: gem: Add support for reading MAC from I2C EEPROM
Bin Meng
- [U-Boot] [RFC PATCH v1 1/2] arm: ls1021aqds: Convert to driver model and enable serial support
Bin Meng
- [U-Boot] [RFC PATCH v1 2/2] arm: ls1021aqds: Enable driver model lpuart serial driver
Bin Meng
- [U-Boot] [PATCH v2 5/5] x86: Add Intel Cougar Canyon 2 board
Bin Meng
- [U-Boot] [PATCH] x86: fix memalign() parameter order
Bin Meng
- [U-Boot] [PATCH 1/6] net: gem: Add support for reading MAC from I2C EEPROM
Bin Meng
- [U-Boot] [PATCH v2 3/7] drivers: block: disk-uclass: implement scsi_init()
Bin Meng
- [U-Boot] [PATCH] gpio: Correct handling of 'gpio status'
Bin Meng
- [U-Boot] [PATCH] cmd/gpio: fix not working 'gpio set' command
Bin Meng
- [U-Boot] [PATCH 1/6] net: gem: Add support for reading MAC from I2C EEPROM
Bin Meng
- [U-Boot] [PATCH v6 66/76] spi: Drop mode_rx
Bin Meng
- [U-Boot] [PATCH 1/6] net: gem: Add support for reading MAC from I2C EEPROM
Bin Meng
- [U-Boot] [PATCH v6 66/76] spi: Drop mode_rx
Bin Meng
- [U-Boot] [PATCH 04/16] trace: Fix compiler warnings in trace
Bin Meng
- [U-Boot] [PATCH 05/16] lib: Don't instrument the div64 function
Bin Meng
- [U-Boot] [PATCH 07/16] timer: Support tracing fully
Bin Meng
- [U-Boot] [PATCH 08/16] timer: Provide an early timer
Bin Meng
- [U-Boot] [PATCH 09/16] timer: Set up the real timer after driver model is available
Bin Meng
- [U-Boot] [PATCH 10/16] sandbox: timer: Support the early timer
Bin Meng
- [U-Boot] [PATCH 12/16] sandbox: Enable the early timer
Bin Meng
- [U-Boot] [PATCH 1/2] dm: core: Add uclass_first_device_err() to return a valid device
Bin Meng
- [U-Boot] [PATCH 01/30] dm: Drop the block_dev_desc_t typedef
Bin Meng
- [U-Boot] [PATCH 02/30] dm: pci: Break out the common region display code
Bin Meng
- [U-Boot] [PATCH 03/30] dm: part: Correct a sandbox build warning
Bin Meng
- [U-Boot] [PATCH 05/30] dm: part: Drop the common.h header
Bin Meng
- [U-Boot] [PATCH 06/30] dm: Add a new header for block devices
Bin Meng
- [U-Boot] [PATCH 07/30] dm: blk: Convert interface type to an enum
Bin Meng
- [U-Boot] [PATCH 08/30] dm: blk: Add comments to a few functions
Bin Meng
- [U-Boot] [PATCH 09/30] dm: blk: Rename get_dev() to blk_get_dev()
Bin Meng
- [U-Boot] [PATCH 10/30] dm: blk: Rename get_device() to blk_get_device_str()
Bin Meng
- [U-Boot] [PATCH 11/30] dm: blk: Rename get_device_and_partition()
Bin Meng
- [U-Boot] [PATCH 12/30] dm: part: Add a cast to avoid a compiler warning
Bin Meng
- [U-Boot] [PATCH 13/30] dm: sandbox: Enable all partition types
Bin Meng
- [U-Boot] [PATCH 14/30] dm: part: Convert partition API use to linker lists
Bin Meng
- [U-Boot] [PATCH 15/30] dm: part: Rename some partition functions
Bin Meng
- [U-Boot] [PATCH 16/30] dm: cbfs: Fix handling of invalid type
Bin Meng
- [U-Boot] [PATCH 17/30] dm: sandbox: Enable cbfs and cramfs
Bin Meng
- [U-Boot] [PATCH 18/30] dm: block: Rename device number member dev to devnum
Bin Meng
- [U-Boot] [PATCH 19/30] dm: block: Adjust device calls to go through helpers function
Bin Meng
- [U-Boot] [PATCH 22/30] dm: blk: Add a block-device uclass
Bin Meng
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Bin Meng
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Bin Meng
- [U-Boot] [PATCH v3 0/5] x86: ivybridge: Add Intel FSP support
Bin Meng
- [U-Boot] [PATCH v3 1/5] x86: ivybridge: Add FSP support
Bin Meng
- [U-Boot] [PATCH v3 2/5] superio: Add SMSC SIO1007 driver
Bin Meng
- [U-Boot] [PATCH v3 3/5] x86: fsp: Make sure HOB list is not overwritten by U-Boot
Bin Meng
- [U-Boot] [PATCH v3 4/5] x86: ivybridge: bd82x6x: Support FSP enabled configuration
Bin Meng
- [U-Boot] [PATCH v3 5/5] x86: Add Intel Cougar Canyon 2 board
Bin Meng
- [U-Boot] [PATCH] x86: fix memalign() parameter order
Bin Meng
- [U-Boot] [PATCH] x86: fix memalign() parameter order
Bin Meng
- [U-Boot] [PATCH] x86: doc: Update to include Intel Bayley Bay board instructions
Bin Meng
- [U-Boot] [PATCH v6 65/76] configs: Use CONFIG_SPI_NOR_MISC
Bin Meng
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Bin Meng
- [U-Boot] [PATCH v7 77/77] x86: Drop using spi_flash_dm_ops
Bin Meng
- [U-Boot] [PATCH v6 65/76] configs: Use CONFIG_SPI_NOR_MISC
Bin Meng
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Bin Meng
- [U-Boot] GSoC projects for Minnowboard MAX
Bin Meng
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Bin Meng
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Bin Meng
- [U-Boot] [PATCH] spi-nor: Correct the logic to detect flash rw mode
Bin Meng
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Bin Meng
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Bin Meng
- [U-Boot] [PATCH v2] spi-nor: Correct the logic to detect flash rw mode
Bin Meng
- [U-Boot] [PATCH] pci: Fix compiler warnings in dm_pciauto_setup_device()
Bin Meng
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Bin Meng
- [U-Boot] Intel Braswell support
Bin Meng
- [U-Boot] GSoC projects for Minnowboard MAX
Bin Meng
- [U-Boot] [PATCH v3 1/5] x86: ivybridge: Add FSP support
Bin Meng
- [U-Boot] [PATCH v3 2/5] superio: Add SMSC SIO1007 driver
Bin Meng
- [U-Boot] [PATCH v3 3/5] x86: fsp: Make sure HOB list is not overwritten by U-Boot
Bin Meng
- [U-Boot] [PATCH v3 4/5] x86: ivybridge: bd82x6x: Support FSP enabled configuration
Bin Meng
- [U-Boot] [PATCH v3 5/5] x86: Add Intel Cougar Canyon 2 board
Bin Meng
- [U-Boot] [PATCH] x86: doc: Update to include Intel Bayley Bay board instructions
Bin Meng
- [U-Boot] Please pull u-boot-x86
Bin Meng
- [U-Boot] ls1021aqds_nor_lpuart_ boards
Bin Meng
- [U-Boot] Maintainers' email address not valid
Bin Meng
- [U-Boot] [PATCH] MAINTAINERS: Remove no longer valid maintainers' email addresses
Bin Meng
- [U-Boot] [PATCH v2] MAINTAINERS: Update no longer valid maintainers' status
Bin Meng
- [U-Boot] [PATCH] tools: Update openrisc toolchain information
Bin Meng
- [U-Boot] [PATCH v2 1/2] arm: ls1021aqds: Convert to driver model and enable serial support
Bin Meng
- [U-Boot] [PATCH v2 2/2] arm: ls1021aqds: Enable driver model lpuart serial driver
Bin Meng
- [U-Boot] [PATCH] dm: serial: Move a carriage return before a line feed
Bin Meng
- [U-Boot] [PATCH 1/2] net: Move CONFIG_RTL8139 to Kconfig
Bin Meng
- [U-Boot] [PATCH 2/2] net: Move CONFIG_RTL8169 to Kconfig
Bin Meng
- [U-Boot] [PATCH] dm: serial: Move a carriage return before a line feed
Bin Meng
- [U-Boot] [PATCH] dm: serial: Move a carriage return before a line feed
Bin Meng
- [U-Boot] [PATCH] serial: Move carriage return before line feed for some serial drivers
Bin Meng
- [U-Boot] [PATCH] serial: Move carriage return before line feed for some serial drivers
Bin Meng
- [U-Boot] [PATCH] serial: Move carriage return before line feed for some serial drivers
Bin Meng
- [U-Boot] [PATCH 2/2] net: Move CONFIG_RTL8169 to Kconfig
Bin Meng
- [U-Boot] [PATCH] serial: Move carriage return before line feed for some serial drivers
Bin Meng
- [U-Boot] [PATCH 00/12] x86: Support booting SeaBIOS
Bin Meng
- [U-Boot] [PATCH 01/12] x86: Move asm/arch-coreboot/tables.h to a common place
Bin Meng
- [U-Boot] [PATCH 02/12] x86: Move sysinfo related to sysinfo.h
Bin Meng
- [U-Boot] [PATCH 03/12] x86: Clean up coreboot_tables.h
Bin Meng
- [U-Boot] [PATCH 04/12] x86: Change to use start/end address pair in write_tables()
Bin Meng
- [U-Boot] [PATCH 05/12] x86: Use a macro for ROM table alignment
Bin Meng
- [U-Boot] [PATCH 06/12] x86: Change write_acpi_tables() signature a little bit
Bin Meng
- [U-Boot] [PATCH 07/12] x86: Simplify codes in write_tables()
Bin Meng
- [U-Boot] [PATCH 08/12] x86: Support writing configuration tables in high area
Bin Meng
- [U-Boot] [PATCH 09/12] x86: Implement functions for writing coreboot table
Bin Meng
- [U-Boot] [PATCH 10/12] x86: Support booting SeaBIOS
Bin Meng
- [U-Boot] [PATCH 11/12] x86: qemu: Enable ACPI table generation by default
Bin Meng
- [U-Boot] [PATCH 12/12] x86: Document how to play with SeaBIOS
Bin Meng
- [U-Boot] [PATCH 12/12] x86: Document how to play with SeaBIOS
Bin Meng
- [U-Boot] [PATCH 01/12] x86: Move asm/arch-coreboot/tables.h to a common place
Bin Meng
- [U-Boot] [PATCH 02/12] x86: Move sysinfo related to sysinfo.h
Bin Meng
- [U-Boot] [PATCH 03/12] x86: Clean up coreboot_tables.h
Bin Meng
- [U-Boot] [PATCH 04/12] x86: Change to use start/end address pair in write_tables()
Bin Meng
- [U-Boot] [PATCH 05/12] x86: Use a macro for ROM table alignment
Bin Meng
- [U-Boot] [PATCH 06/12] x86: Change write_acpi_tables() signature a little bit
Bin Meng
- [U-Boot] [PATCH 07/12] x86: Simplify codes in write_tables()
Bin Meng
- [U-Boot] [PATCH 08/12] x86: Support writing configuration tables in high area
Bin Meng
- [U-Boot] [PATCH 09/12] x86: Implement functions for writing coreboot table
Bin Meng
- [U-Boot] [PATCH v2 0/3] x86: Support booting SeaBIOS
Bin Meng
- [U-Boot] [PATCH v2 1/3] x86: Support booting SeaBIOS
Bin Meng
- [U-Boot] [PATCH v2 2/3] x86: qemu: Enable ACPI table generation by default
Bin Meng
- [U-Boot] [PATCH v2 3/3] x86: Document how to play with SeaBIOS
Bin Meng
- [U-Boot] [PATCH] ARM: keystone2: Get rid of unused clock files
Nishanth Menon
- [U-Boot] [PATCH V5 7/7] board: ti: AM57xx: Add detection logic for AM57xx-evm
Nishanth Menon
- [U-Boot] [PATCH 0/6] ARM: keystone2: Miscellaneous fixes
Nishanth Menon
- [U-Boot] [PATCH 1/6] ARM: keystone2: Use macro for DSP GEM power domain
Nishanth Menon
- [U-Boot] [PATCH 2/6] ARM: keystone2: K2G: power-off DSP during boot
Nishanth Menon
- [U-Boot] [PATCH 3/6] ARM: keystone2: Allow for board specific speed definitions
Nishanth Menon
- [U-Boot] [PATCH 4/6] ARM: keystone2: K2G: Add support for different arm/device speeds
Nishanth Menon
- [U-Boot] [PATCH 5/6] ARM: keystone2: use SPD info to configure K2HK and K2E DDR3
Nishanth Menon
- [U-Boot] [PATCH 6/6] ARM: keystone2: use detected ddr3a size
Nishanth Menon
- [U-Boot] [PATCH V2 0/6] ARM: keystone: K2G: Add support for PMMC remoteproc load
Nishanth Menon
- [U-Boot] [PATCH V2 1/6] ARM: keystone2: psc: redo doc in kernel-doc format
Nishanth Menon
- [U-Boot] [PATCH V2 2/6] ARM: keystone2: psc-defs: use adequate () for macros
Nishanth Menon
- [U-Boot] [PATCH V2 3/6] ARM: keystone2: psc: introduce function to hold and release module in reset.
Nishanth Menon
- [U-Boot] [PATCH V2 4/6] remoteproc: Add support for TI power processor
Nishanth Menon
- [U-Boot] [PATCH V2 5/6] ARM: dts: k2g: Add support for PMMC
Nishanth Menon
- [U-Boot] [PATCH V2 6/6] configs: k2g_evm: Add TI power processor support
Nishanth Menon
- [U-Boot] [PATCH 5/6] ARM: keystone2: use SPD info to configure K2HK and K2E DDR3
Nishanth Menon
- [U-Boot] [PATCH V2 2/6] ARM: keystone2: psc-defs: use adequate () for macros
Nishanth Menon
- [U-Boot] [PATCH V2 5/6] ARM: dts: k2g: Add support for PMMC
Nishanth Menon
- [U-Boot] [PATCH V2 5/6] ARM: dts: k2g: Add support for PMMC
Nishanth Menon
- [U-Boot] [PATCH] booti: Help text rework.
Karsten Merker
- [U-Boot] [PATCH] booti: Help text rework.
Karsten Merker
- [U-Boot] [PATCH] ARM: at91: sama5d2: configure the L2 cache memory
Samuel Mescoff
- [U-Boot] [PATCH v2] ARM: at91: sama5d2: configure the L2 cache memory
Samuel Mescoff
- [U-Boot] [PATCH 1/2] imx: mx6: Implement mmc_get_env_part
Soeren Moch
- [U-Boot] [PATCH 2/2] board: tbs2910: Autoselect environment device when booting from SD
Soeren Moch
- [U-Boot] [PATCH] board: tbs2910: Fix eMMC BOOTCFG value
Soeren Moch
- [U-Boot] [Regression] gpio set command broken
Soeren Moch
- [U-Boot] [PATCH] gpio: Correct handling of 'gpio status'
Soeren Moch
- [U-Boot] [Regression] gpio set command broken
Soeren Moch
- [U-Boot] [PATCH 0/5] s3c24xx serial driver cleanup patches
David Müller
- [U-Boot] [PATCH 1/5] Remove unused CONFIG_MODEM_SUPPORT option and associated dead code.
David Müller
- [U-Boot] [PATCH 2/5] Remove unused CONFIG_CMD_HWFLOW option and associated dead code.
David Müller
- [U-Boot] [PATCH 3/5] Remove unused CONFIG_HWFLOW option and associated dead code.
David Müller
- [U-Boot] [PATCH 4/5] doc: Remove any reference to CONFIG_MODEM_SUPPORT, CONFIG_CMD_HWFLOW, CONFIG_HWFLOW and friends from the documentation.
David Müller
- [U-Boot] [PATCH 5/5] s3c24xx: serial: Remove dead code
David Müller
- [U-Boot] [PATCH 0/4] Use THUMB mode for VCMA9 U-Boot builts
David Müller
- [U-Boot] [PATCH 1/4] arm: make sure board_init_r() is being called using the right mode (ARM / THUMB)
David Müller
- [U-Boot] [PATCH 2/4] arm: the ARM920T is THUMB capable, so select the appropriate ISA
David Müller
- [U-Boot] [PATCH 3/4] arm: build some file(s) as ARM mode only
David Müller
- [U-Boot] [PATCH 4/4] arm: VCMA9: because of NOR flash space constrains, activate THUMB build mode
David Müller
- [U-Boot] [PATCH v3 0/8] driver model bring-up of keystone net on k2hk, k2l, k2e and k2g evm
Mugunthan V N
- [U-Boot] [PATCH v3 1/8] board: ti: ks2_evm: remove board_eth_init when CONFIG_DM_ETH is defined
Mugunthan V N
- [U-Boot] [PATCH v3 2/8] drivers: net: phy: micrel: fix build errors with CONFIG_DM_ETH
Mugunthan V N
- [U-Boot] [PATCH v3 3/8] drivers: net: keystone_net: convert driver to adopt device driver model
Mugunthan V N
- [U-Boot] [PATCH v3 4/8] defconfig: k2hk_evm_defconfig: enable net driver model
Mugunthan V N
- [U-Boot] [PATCH v3 5/8] defconfig: k2l_evm_defconfig: enable net driver model
Mugunthan V N
- [U-Boot] [PATCH v3 6/8] defconfig: k2e_evm_defconfig: enable net driver model
Mugunthan V N
- [U-Boot] [PATCH v3 7/8] ARM: dts: k2g: Add keystone net dts files
Mugunthan V N
- [U-Boot] [PATCH v3 8/8] defconfig: k2g_evm_defconfig: enable net driver model
Mugunthan V N
- [U-Boot] [PATCH v2 0/7] driver model bring-up of sata device on dra72 and dra74 evm
Mugunthan V N
- [U-Boot] [PATCH v2 1/7] arm: omap: sata: move enable sata clocks to enable_basic_clocks()
Mugunthan V N
- [U-Boot] [PATCH v2 2/7] arm: omap: sata: compile out sata init apis when CONFIG_DISK is defined
Mugunthan V N
- [U-Boot] [PATCH v2 3/7] drivers: block: disk-uclass: implement scsi_init()
Mugunthan V N
- [U-Boot] [PATCH v2 4/7] arm: omap-common: sata: prepare driver for DM conversion
Mugunthan V N
- [U-Boot] [PATCH v2 5/7] drivers: block: dwc_ahci: Implement a driver for Synopsys DWC sata device
Mugunthan V N
- [U-Boot] [PATCH v2 6/7] defconfig: dra74_evm: enable disk driver model
Mugunthan V N
- [U-Boot] [PATCH v2 7/7] defconfig: dra72_evm: enable disk driver model
Mugunthan V N
- [U-Boot] [PATCH v2 0/7] driver model bring-up of sata device on dra72 and dra74 evm
Mugunthan V N
- [U-Boot] help on using patman
Mugunthan V N
- [U-Boot] help on using patman
Mugunthan V N
- [U-Boot] [PATCH v2 3/7] drivers: block: disk-uclass: implement scsi_init()
Mugunthan V N
- [U-Boot] [PATCH v3 5/6] drivers: dma: ti-edma3: convert driver to adopt driver model
Mugunthan V N
- [U-Boot] [PATCH v4 0/6] add dma uclass implementation and adopt ti-edma3 to it
Mugunthan V N
- [U-Boot] [PATCH v4 1/6] dm: implement a DMA uclass
Mugunthan V N
- [U-Boot] [PATCH v4 2/6] dma: Kconfig: Add TI_EDMA3 entry
Mugunthan V N
- [U-Boot] [PATCH v4 3/6] sf: spi_flash: use dma to copy data from mmap region if platform supports
Mugunthan V N
- [U-Boot] [PATCH v4 4/6] spi: ti_qspi: compile out spi_flash_copy_mmap when CONFIG_DMA is defined
Mugunthan V N
- [U-Boot] [PATCH v4 5/6] drivers: dma: ti-edma3: convert driver to adopt driver model
Mugunthan V N
- [U-Boot] [PATCH v4 6/6] defconfig: am437x_sk_evm: enable dma driver model
Mugunthan V N
- [U-Boot] [U-Boot, v2, 3/7] drivers: block: disk-uclass: implement scsi_init()
Mugunthan V N
- [U-Boot] Pull request: u-boot-spi/master
Mugunthan V N
- [U-Boot] [U-Boot, v2, 3/7] drivers: block: disk-uclass: implement scsi_init()
Mugunthan V N
- [U-Boot] [PATCH 00/17] driver model bring-up of musb on AM335x GP and BBB and usb_ether DM conversion
Mugunthan V N
- [U-Boot] [PATCH 01/17] configs: am335x: usb: do not define CONFIG_DM_USB for spl
Mugunthan V N
- [U-Boot] [PATCH 02/17] am33xx: board: do not register usb devices when CONFIG_DM_USB is defined
Mugunthan V N
- [U-Boot] [PATCH 03/17] drivers: usb: musb: add ti musb misc driver for wrapper
Mugunthan V N
- [U-Boot] [PATCH 04/17] am33xx: board: probe misc drivers to register musb devices
Mugunthan V N
- [U-Boot] [PATCH 05/17] drivers: usb: musb: adopt musb backend driver to driver model
Mugunthan V N
- [U-Boot] [PATCH 06/17] drivers: usb: musb: add ti musb host driver with driver model support
Mugunthan V N
- [U-Boot] [PATCH 07/17] drivers: usb: musb: add ti musb peripheral driver with driver model support
Mugunthan V N
- [U-Boot] [PATCH 08/17] drivers: usb: gadget: ether: adopt to usb driver model
Mugunthan V N
- [U-Boot] [PATCH 09/17] drivers: usb: gadget: ether: access network_started using local variable
Mugunthan V N
- [U-Boot] [PATCH 10/17] drivers: usb: gadget: ether: consolidate global devices to single struct
Mugunthan V N
- [U-Boot] [PATCH 11/17] drivers: usb: gadget: ether: use net device priv to pass usb ether priv
Mugunthan V N
- [U-Boot] [PATCH 12/17] drivers: usb: gadget: ether: prepare driver for driver model migration
Mugunthan V N
- [U-Boot] [PATCH 13/17] drivers: usb: gadget: ether/rndis: convert driver to adopt device driver model
Mugunthan V N
- [U-Boot] [PATCH 14/17] am33xx: board: init usb ether gadget for rndis support
Mugunthan V N
- [U-Boot] [PATCH 15/17] am335x_evm: enable usb ether gadget as it supports DM_ETH
Mugunthan V N
- [U-Boot] [PATCH 16/17] defconfig: am335x_boneblack: enable usb driver model
Mugunthan V N
- [U-Boot] [PATCH 17/17] defconfig: am335x_gp_evm: enable usb driver model
Mugunthan V N
- [U-Boot] [PATCH 03/17] drivers: usb: musb: add ti musb misc driver for wrapper
Mugunthan V N
- [U-Boot] [PATCH 1/1] am33xx: Update serial platdata to update reg_offset to 0
Mugunthan V N
- [U-Boot] [PATCH 03/17] drivers: usb: musb: add ti musb misc driver for wrapper
Mugunthan V N
- [U-Boot] [PATCH 05/17] drivers: usb: musb: adopt musb backend driver to driver model
Mugunthan V N
- [U-Boot] [PATCH 0/3] device model bringup of AM335x bbw and sk-evm
Mugunthan V N
- [U-Boot] [PATCH 1/3] include: configs: am335x_evm: add FAT_ENV configs when env is in fat
Mugunthan V N
- [U-Boot] [PATCH 2/3] am335x-bbw: Add am335x_bone_defconfig using CONFIG_DM
Mugunthan V N
- [U-Boot] [PATCH 3/3] am437x-sk: add am335x_gp_evm_defconfig using CONFIG_DM
Mugunthan V N
- [U-Boot] UBI attach issues
Andy Ng
- [U-Boot] UBI attach issues
Andy Ng
- [U-Boot] FPGA detection failure on Cyclone V soc development kit
Dinh Nguyen
- [U-Boot] [PATCH 2/2] net: phy: micrel: fix divisor value for KSZ9031 phy skew
Dinh Nguyen
- [U-Boot] [PATCHv2 1/3] arm: socfpga: add reset manager defines for Arria10
Dinh Nguyen
- [U-Boot] [PATCH] arm: socfpga: Fix ethernet reset handling
Dinh Nguyen
- [U-Boot] placement for new clock drivers
Dinh Nguyen
- [U-Boot] [PATCH v2] kirkwood_nand: claim MPP pins on the fly
Chris Packham
- [U-Boot] [PATCH] mmc: sdhci: Clear internal clock enable bit
Siva Durga Prasad Paladugu
- [U-Boot] [PATCHv2] common/memsize.c: Simplify RAM size detection
Eddy Petrișor
- [U-Boot] [PATCHv2] common/memsize.c: Simplify RAM size detection
Eddy Petrișor
- [U-Boot] Fwd: Patman use (was: [PATCHv2] common/memsize.c: Simplify RAM size detection)
Eddy Petrișor
- [U-Boot] [U-Boot, PATCHv2] common/memsize.c: Simplify RAM size detection
Eddy Petrișor
- [U-Boot] [PATCHv2] common/memsize.c: Simplify RAM size detection
Eddy Petrișor
- [U-Boot] [PATCH] common/memsize.c: fix endless loop when saving
Eddy Petrișor
- [U-Boot] [PATCH] common/memsize.c: fix endless loop when saving
Eddy Petrișor
- [U-Boot] [PATCH] Revert "common/memsize.c: Simplify RAM size detection"
Eddy Petrișor
- [U-Boot] [PATCH] Revert "common/memsize.c: Simplify RAM size detection"
Eddy Petrișor
- [U-Boot] [PATCH] common/memsize.c: fix endless loop when saving
Eddy Petrișor
- [U-Boot] [PATCH] common/memsize.c: fix endless loop when saving
Eddy Petrișor
- [U-Boot] Regarding revert of "Simplify RAM size detection" patch
Eddy Petrișor
- [U-Boot] Falcon mode for TI DM355
Andy Pont
- [U-Boot] Falcon mode for TI DM355
Andy Pont
- [U-Boot] Regarding revert of "Simplify RAM size detection" patch
Sam Protsenko
- [U-Boot] Regarding revert of "Simplify RAM size detection" patch
Sam Protsenko
- [U-Boot] [PATCH] usb: gadget: composite: Correct recovery path for register
Sam Protsenko
- [U-Boot] [PATCH 2/3] arm: dra7xx: Define Android partition table
Sam Protsenko
- [U-Boot] [PATCH] usb: gadget: composite: Correct recovery path for register
Sam Protsenko
- [U-Boot] [PATCH 3/3] defconfig: Add dra7xx_evm_android_defconfig
Sam Protsenko
- [U-Boot] [PATCH 1/3] omap5: Kconfig: Add option to select Android boot
Sam Protsenko
- [U-Boot] [PATCH] usb: gadget: composite: Correct recovery path for register
Semen Protsenko
- [U-Boot] [PATCH 1/3] omap5: Kconfig: Add option to select Android boot
Semen Protsenko
- [U-Boot] [PATCH 2/3] arm: dra7xx: Define Android partition table
Semen Protsenko
- [U-Boot] [PATCH 3/3] defconfig: Add dra7xx_evm_android_defconfig
Semen Protsenko
- [U-Boot] [PATCH] arm: dra7xx: Define Android partition table
Semen Protsenko
- [U-Boot] [PATCH v5 1/4] driver: qe: Mask the codes not used for micro QE
Zhao Qiang
- [U-Boot] [PATCH v5 2/4] board: ls1043ardb: Add micro QE support for ls1043ardb
Zhao Qiang
- [U-Boot] [PATCH v5 3/4] borad: ls1043rdb: Move USB muxing config to config_board_mux
Zhao Qiang
- [U-Boot] [PATCH v5 4/4] board: ls1043ardb: Modify pin-muxing code for USB and QE-HDLC
Zhao Qiang
- [U-Boot] [PATCH] armv8/ls1043aqds: fix DSPI/QSPI node in dts file
Gong Qianyu
- [U-Boot] [PATCH] armv8/ls1043aqds: Add USB support for ls1043aqds
Gong Qianyu
- [U-Boot] [Patch V4 1/3] qe: move drivers/qe/qe.h to include/fsl_qe.h
Gong Qianyu
- [U-Boot] [Patch V4 2/3] fm: fdt: Move fman ucode fixup to Fman driver code
Gong Qianyu
- [U-Boot] [Patch V4 3/3] armv8/fsl-layerscape: fdt: add fixup for Fman ucode
Gong Qianyu
- [U-Boot] [Patch V2] armv8/ls1043aqds: Add USB support for ls1043aqds
Gong Qianyu
- [U-Boot] [Patch V5 0/4] Qe/Fman related patches
Gong Qianyu
- [U-Boot] [Patch V5 1/4] qe: move drivers/qe/qe.h to include/fsl_qe.h
Gong Qianyu
- [U-Boot] [Patch V5 2/4] fm: fdt: Move fman ucode fixup to driver code
Gong Qianyu
- [U-Boot] [Patch V5 3/4] driver/fm: fdt.c: fix fdt_fixup_fman_firmware() to support ARM platforms
Gong Qianyu
- [U-Boot] [Patch V5 4/4] armv8/fsl-layerscape: fdt: add fixup for Fman ucode
Gong Qianyu
- [U-Boot] [PATCH] armv8/fsl-layerscape: add IFC fixup for LS1043A with QSPI enabled
Gong Qianyu
- [U-Boot] [PATCH] ARM : DRA7: Switch QSPI to use MODE-0 at 64MHz
Vignesh R
- [U-Boot] [PATCH] am43xx: qspi: Fix config to select SPI mode
Vignesh R
- [U-Boot] [PATCH] openrisc: updating build tools naming convention
Guillaume REMBERT
- [U-Boot] [PATCH] openrisc: updating build tools naming convention
Guillaume REMBERT
- [U-Boot] [PATCH 1/3] spi: omap3: Move headers code inside the driver
Christophe Henri RICARD
- [U-Boot] [PATCH 2/3] spi: omap3: Make local functions as static
Christophe Henri RICARD
- [U-Boot] [PATCH 3/3] spi: omap3: Convert to driver model
Christophe Henri RICARD
- [U-Boot] [PATCH v4 0/5] dm: omap3_spi: Convert to driver model
Christophe Henri RICARD
- [U-Boot] [PATCH v4 5/5] spi: omap3: Convert to driver model
Christophe Henri RICARD
- [U-Boot] [PATCH v4 3/5] spi: omap3: Move headers code inside the driver
Christophe Henri RICARD
- [U-Boot] [PATCH 1/2] fastboot: sparse: fix block addressing for don't care chunk type
Steve Rae
- [U-Boot] [PATCH 2/2] fastboot: sparse: remove unnecessary logging
Steve Rae
- [U-Boot] [PATCH 2/2] fastboot: sparse: remove unnecessary logging
Steve Rae
- [U-Boot] [PATCH 2/2] fastboot: sparse: remove unnecessary logging
Steve Rae
- [U-Boot] [PATCH 2/2] fastboot: sparse: remove unnecessary logging
Steve Rae
- [U-Boot] exclude email by patman
Steve Rae
- [U-Boot] [PATCH v2 1/2] fastboot: sparse: fix block addressing for don't care chunk type
Steve Rae
- [U-Boot] [PATCH v2 2/2] fastboot: sparse: remove unnecessary logging
Steve Rae
- [U-Boot] [PATCH 2/2] fastboot: sparse: remove unnecessary logging
Steve Rae
- [U-Boot] [PATCH] fastboot: update error and warning messages
Steve Rae
- [U-Boot] [PATCH] implement Fastboot via USB OTG on bcm28155_ap boards
Steve Rae
- [U-Boot] [PATCH v2 1/2] fastboot: sparse: fix block addressing for don't care chunk type
Steve Rae
- [U-Boot] [PATCH v2 2/2] fastboot: sparse: remove unnecessary logging
Steve Rae
- [U-Boot] [PATCH] armv8/ls2080ardb: Enable VID support
Harninder Rai
- [U-Boot] [PATCH] armv8/ls2080ardb: Enable VID support
Harninder Rai
- [U-Boot] [PATCH][v2] armv8/ls2080ardb: Enable VID support
Harninder Rai
- [U-Boot] Newbie SPL question for socfpga_sockit
Phil Reid
- [U-Boot] [PATCH 3/4] spi: omap3: Convert to DM
Christophe Ricard
- [U-Boot] [PATCH 3/4] spi: omap3: Convert to DM
Christophe Ricard
- [U-Boot] Pull request: u-boot-arm/master
Tom Rini
- [U-Boot] [PATCH 2/6] cmd: Fix control bmp_display()
Tom Rini
- [U-Boot] [PATCH 3/6] video: Use 'int' for loop variables instead of short
Tom Rini
- [U-Boot] [PATCH 4/6] video: test: Adjust order of file closure
Tom Rini
- [U-Boot] [PATCH 5/6] bzlib: Try another way to fix an unused variable
Tom Rini
- [U-Boot] [PATCH 6/6] rockchip: Drop old CONFIG_VIDEO_ROTATION option
Tom Rini
- [U-Boot] .travis.yml: rework according to new travis-ci infra
Tom Rini
- [U-Boot] malloc: work around some memalign fragmentation issues
Tom Rini
- [U-Boot] mmc: add missing prototype for mmc_get_env_dev
Tom Rini
- [U-Boot] mailmap: fix Ricardo's entry
Tom Rini
- [U-Boot] [U-Boot, v3, 1/7] tegra: Clarify generation of -nodtb file with OF_CONTROL
Tom Rini
- [U-Boot] [U-Boot, v3, 1/7] tegra: Clarify generation of -nodtb file with OF_CONTROL
Tom Rini
- [U-Boot] [U-Boot, v3, 2/7] fdt: Build a U-Boot binary without device tree
Tom Rini
- [U-Boot] [U-Boot, v3, 3/7] fdt: Build an SPL binary without device tree
Tom Rini
- [U-Boot] [U-Boot, v3, 4/7] tegra: Always build a boot image with the same filename
Tom Rini
- [U-Boot] [U-Boot,v3,5/7] socfpga: Simplify Makefile filenames
Tom Rini
- [U-Boot] [U-Boot, v3, 6/7] Makefile: Make u-boot.img the same as u-boot-dtb.img
Tom Rini
- [U-Boot] [U-Boot, v3, 7/7] Makefile: Drop unnecessary -dtb suffixes
Tom Rini
- [U-Boot] [PULL] u-boot-mips/master
Tom Rini
- [U-Boot] [PATCH v3 6/7] Makefile: Make u-boot.img the same as u-boot-dtb.img
Tom Rini
- [U-Boot] [PATCH v3 0/7] fdt: Replace u-boot-dtb.bin with u-boot.bin
Tom Rini
- [U-Boot] [PULL] u-boot-atmel/master -> u-boot/master
Tom Rini
- [U-Boot] Please pull u-boot-fsl-qoriq master
Tom Rini
- [U-Boot] [PATCH 12/16] efi_loader: Add DCACHE_OFF support for arm64
Tom Rini
- [U-Boot] do i have any chance of booting a vxworks 5.5.2 image with u-boot?
Tom Rini
- [U-Boot] [ANN] U-Boot v2016.03-rc1 released
Tom Rini
- [U-Boot] your mail
Tom Rini
- [U-Boot] [PATCH 2/3] common: env_flags: include common.h even for HOST_CC
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-imx
Tom Rini
- [U-Boot] [PULL] u-boot-socfpga/master
Tom Rini
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] [PATCH] OMAP3: Enable SPL on omap3_logic
Tom Rini
- [U-Boot] [PATCH] OMAP3_LOGIC: Setup defconfig to enable SPL and NAND booting
Tom Rini
- [U-Boot] [PATCH] OMAP3: omap3_logic: Enable Android Fastboot
Tom Rini
- [U-Boot] [PATCH] OMAP3: omap3_logic: Enable CONFIG_SMC911X_32_BIT
Tom Rini
- [U-Boot] [PATCH V2] OMAP3: omap3_logic: Remove YAFFS support.
Tom Rini
- [U-Boot] [PATCH 2/6] dm: opencores: Drop opencores_yanu serial driver
Tom Rini
- [U-Boot] [PATCH 3/6] dm: freescale: serial: Drop serial_imx serial driver
Tom Rini
- [U-Boot] [PATCH 4/6] dm: serial: Drop serial_max3100 serial driver
Tom Rini
- [U-Boot] [PATCH 5/6] dm: pxa: serial: Drop serial_sa1100 serial driver
Tom Rini
- [U-Boot] [PATCH] Revert "arm: Remove wireless_space board"
Tom Rini
- [U-Boot] 9c11135 breaks bootz
Tom Rini
- [U-Boot] 64-bit x86 U-Boot?
Tom Rini
- [U-Boot] [PATCH] ppc: xilinx-ppc405-generic
Tom Rini
- [U-Boot] [PATCH] malloc: solve dead code issue in memalign()
Tom Rini
- [U-Boot] CONFIG_MODEM_SUPPORT / CONFIG_HWFLOW still in use?
Tom Rini
- [U-Boot] [PATCH] sniper: Drop references to P970
Tom Rini
- [U-Boot] Maintainers' email address not valid
Tom Rini
- [U-Boot] [PATCH 3/4] spi: omap3: Convert to DM
Tom Rini
- [U-Boot] [PATCH v2 3/7] drivers: block: disk-uclass: implement scsi_init()
Tom Rini
- [U-Boot] [PATCH] serial: pl01x: Add support for devices with the rate pre-configured.
Tom Rini
- [U-Boot] Please pull u-boot-x86
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-nios/master
Tom Rini
- [U-Boot] Pull request: u-boot-staging
Tom Rini
- [U-Boot] [PATCH] OMAP3: am3517_evm: SD/MMC boot with uEnv.txt, zImage, and FDT
Tom Rini
- [U-Boot] [U-Boot, v3, 1/7] tools: env validate: pass values as 0-based array
Tom Rini
- [U-Boot] [U-Boot, v3, 2/7] tools: env: make parse_aes_key stateless
Tom Rini
- [U-Boot] [U-Boot, v3, 3/7] tools: env: introduce setenv/printenv argument structs
Tom Rini
- [U-Boot] [U-Boot, v3, 4/7] tools: env: parse aes key / suppress flag into argument struct
Tom Rini
- [U-Boot] [U-Boot, v3, 5/7] tools: env: shift optind arguments and fix argument indices
Tom Rini
- [U-Boot] [U-Boot, v3, 6/7] tools: env: factor out parse_common_args
Tom Rini
- [U-Boot] [U-Boot,v3,7/7] tools: env: update usage strings
Tom Rini
- [U-Boot] [U-Boot,41/41,v2] ARM: omap3_logic: Fix pin muxing
Tom Rini
- [U-Boot] test, tools: introduce tbot README
Tom Rini
- [U-Boot] serial: serial_stm32: move clock config from driver to board
Tom Rini
- [U-Boot] [U-Boot, 1/2] hush: Pull out U-Boot prompt display and read functionality
Tom Rini
- [U-Boot] [U-Boot, 2/2] hush: Add rudimentary support for PS1 and PS2
Tom Rini
- [U-Boot] rpi: link to another model number info source
Tom Rini
- [U-Boot] rpi: link to another model number info source
Tom Rini
- [U-Boot] [U-Boot,v2] rpi: fix up Model B entries
Tom Rini
- [U-Boot] OMAP3: Enable SPL on omap3_logic
Tom Rini
- [U-Boot] OMAP3_LOGIC: Setup defconfig to enable SPL and NAND booting
Tom Rini
- [U-Boot] [U-Boot, 1/6] dm: freescale: Drop mxs_auart serial driver
Tom Rini
- [U-Boot] [U-Boot, 2/6] dm: opencores: Drop opencores_yanu serial driver
Tom Rini
- [U-Boot] [U-Boot, 3/6] dm: freescale: serial: Drop serial_imx serial driver
Tom Rini
- [U-Boot] [U-Boot, 4/6] dm: serial: Drop serial_max3100 serial driver
Tom Rini
- [U-Boot] [U-Boot, 5/6] dm: pxa: serial: Drop serial_sa1100 serial driver
Tom Rini
- [U-Boot] [U-Boot, 6/6] dm: Update on current serial driver status
Tom Rini
- [U-Boot] OMAP3: omap3_logic: Enable Android Fastboot
Tom Rini
- [U-Boot] OMAP3: omap3_logic: Enable CONFIG_SMC911X_32_BIT
Tom Rini
- [U-Boot] [U-Boot,V2] OMAP3: omap3_logic: Remove YAFFS support.
Tom Rini
- [U-Boot] [U-Boot, v3, 1/8] board: ti: ks2_evm: remove board_eth_init when CONFIG_DM_ETH is defined
Tom Rini
- [U-Boot] [U-Boot, v3, 2/8] drivers: net: phy: micrel: fix build errors with CONFIG_DM_ETH
Tom Rini
- [U-Boot] [U-Boot, v3, 3/8] drivers: net: keystone_net: convert driver to adopt device driver model
Tom Rini
- [U-Boot] [U-Boot, v3, 4/8] defconfig: k2hk_evm_defconfig: enable net driver model
Tom Rini
- [U-Boot] [U-Boot, v3, 5/8] defconfig: k2l_evm_defconfig: enable net driver model
Tom Rini
- [U-Boot] [U-Boot, v3, 6/8] defconfig: k2e_evm_defconfig: enable net driver model
Tom Rini
- [U-Boot] [U-Boot, v3, 7/8] ARM: dts: k2g: Add keystone net dts files
Tom Rini
- [U-Boot] [U-Boot, v3, 8/8] defconfig: k2g_evm_defconfig: enable net driver model
Tom Rini
- [U-Boot] [U-Boot, PATCHv2] common/memsize.c: Simplify RAM size detection
Tom Rini
- [U-Boot] rpi: set ethaddr as well
Tom Rini
- [U-Boot] .travis.yml: explicitly request sudo
Tom Rini
- [U-Boot] api: Add FreeBSD API support for MIPS platforms
Tom Rini
- [U-Boot] malloc: solve dead code issue in memalign()
Tom Rini
- [U-Boot] test/py: support running sandbox under gdbserver
Tom Rini
- [U-Boot] image: fix getenv_bootm_size() function again
Tom Rini
- [U-Boot] [U-Boot, v3, 1/3] kbuild: remove unneeded ifdef conditionals around build rules
Tom Rini
- [U-Boot] [U-Boot, v3, 2/3] kbuild: add missing FORCE where $(call if_changed, ) is used
Tom Rini
- [U-Boot] [U-Boot, v3, 3/3] kbuild: fix build rule of u-boot-spl.dtb
Tom Rini
- [U-Boot] board_r: fix a typo in comment block
Tom Rini
- [U-Boot] [U-Boot, 1/2] ARM: rpi: update memory layout env. var. documentation
Tom Rini
- [U-Boot] [U-Boot, 2/2] ARM: rpi: set fdt_high in the default environment
Tom Rini
- [U-Boot] [U-Boot, 1/5] Remove unused CONFIG_MODEM_SUPPORT option and associated dead code.
Tom Rini
- [U-Boot] [U-Boot, 2/5] Remove unused CONFIG_CMD_HWFLOW option and associated dead code.
Tom Rini
- [U-Boot] [U-Boot, 3/5] Remove unused CONFIG_HWFLOW option and associated dead code.
Tom Rini
- [U-Boot] [U-Boot, 4/5] doc: Remove any reference to CONFIG_MODEM_SUPPORT, CONFIG_CMD_HWFLOW, CONFIG_HWFLOW and friends from the documentation.
Tom Rini
- [U-Boot] [U-Boot,5/5] s3c24xx: serial: Remove dead code
Tom Rini
- [U-Boot] sniper: Drop references to P970
Tom Rini
- [U-Boot] test/py: support running sandbox under gdbserver
Tom Rini
- [U-Boot] [PATCH] Makefile: remove BUILD_TAG from KBUILD_CFLAGS
Tom Rini
- [U-Boot] [PATCH] OMAP3: omap3_logic: Grow SPL to 64K from 54K
Tom Rini
- [U-Boot] Pull request: u-boot-net.git master
Tom Rini
- [U-Boot] [PATCH 1/4] arm: make sure board_init_r() is being called using the right mode (ARM / THUMB)
Tom Rini
- [U-Boot] exclude email by patman
Tom Rini
- [U-Boot] [PATCH] Makefile: remove BUILD_TAG from KBUILD_CFLAGSilver pepper blue dog
Tom Rini
- [U-Boot] [PATCH] Makefile: remove BUILD_TAG from KBUILD_CFLAGS
Tom Rini
- [U-Boot] test, tools: introduce tbot README
Tom Rini
- [U-Boot] [PATCH] OMAP3_logic: Add NAND args to boot UBIFS
Tom Rini
- [U-Boot] [PATCH] Revert "common/memsize.c: Simplify RAM size detection"
Tom Rini
- [U-Boot] Please pull u-boot-dm
Tom Rini
- [U-Boot] [PATCH] ARM : DRA7: Switch QSPI to use MODE-0 at 64MHz
Tom Rini
- [U-Boot] [PATCH] am43xx: qspi: Fix config to select SPI mode
Tom Rini
- [U-Boot] [PATCH V2] OMAP3_logic: Add NAND args to boot UBIFS
Tom Rini
- [U-Boot] [PATCH 1/4] arm: make sure board_init_r() is being called using the right mode (ARM / THUMB)
Tom Rini
- [U-Boot] [PATCH V2] Makefile: remove BUILD_TAG from KBUILD_CFLAGS
Tom Rini
- [U-Boot] [PATCH 3/4] spi: omap3: Convert to DM
Tom Rini
- [U-Boot] [PATCH V3] Makefile: remove BUILD_TAG from KBUILD_CFLAGS
Tom Rini
- [U-Boot] [PATCH 19/26] mkimage: Support adding device tree files to a FIT
Tom Rini
- [U-Boot] [PATCH] arm: socfpga: Remove bashisms from qts filter
Tom Rini
- [U-Boot] Falcon mode for TI DM355
Tom Rini
- [U-Boot] Falcon mode for TI DM355
Tom Rini
- [U-Boot] Pull request: u-boot-video/master
Tom Rini
- [U-Boot] [PATCH] OMAP3SOM BOARD: Auto detect Logic PD Models
Tom Rini
- [U-Boot] [PATCH 19/26] mkimage: Support adding device tree files to a FIT
Tom Rini
- [U-Boot] [PATCH] tools: fix env_flags build
Tom Rini
- [U-Boot] Pull request: nand flash
Tom Rini
- [U-Boot] pull request: u-boot-uniphier/master
Tom Rini
- [U-Boot] [Regression] gpio set command broken
Tom Rini
- [U-Boot] [PATCH] cmd: gpio: Fix 'set' regression
Tom Rini
- [U-Boot] [PATCH] cmd: gpio: Fix 'set' regression
Tom Rini
- [U-Boot] [PATCH 2/3] common: env_flags: include common.h even for HOST_CC
Tom Rini
- [U-Boot] OMAP3: am3517_evm: SD/MMC boot with uEnv.txt, zImage, and FDT
Tom Rini
- [U-Boot] OMAP3: omap3_logic: Grow SPL to 64K from 54K
Tom Rini
- [U-Boot] OMAP3LOGIC: Update maintainer
Tom Rini
- [U-Boot] Fix variable documented in README.distro for PXE address.
Tom Rini
- [U-Boot] [U-Boot, 1/4] arm: make sure board_init_r() is being called using the right mode (ARM / THUMB)
Tom Rini
- [U-Boot] [U-Boot, 2/4] arm: the ARM920T is THUMB capable, so select the appropriate ISA
Tom Rini
- [U-Boot] [U-Boot,3/4] arm: build some file(s) as ARM mode only
Tom Rini
- [U-Boot] [U-Boot, 4/4] arm: VCMA9: because of NOR flash space constrains, activate THUMB build mode
Tom Rini
- [U-Boot] ARM : DRA7: Switch QSPI to use MODE-0 at 64MHz
Tom Rini
- [U-Boot] am43xx: qspi: Fix config to select SPI mode
Tom Rini
- [U-Boot] [U-Boot,V2] OMAP3_logic: Add NAND args to boot UBIFS
Tom Rini
- [U-Boot] [U-Boot, V3] Makefile: remove BUILD_TAG from KBUILD_CFLAGS
Tom Rini
- [U-Boot] ARM: rpi: set initrd_high
Tom Rini
- [U-Boot] [U-Boot,v2] tools: fix env_flags build
Tom Rini
- [U-Boot] gpio: Correct handling of 'gpio status'
Tom Rini
- [U-Boot] [U-Boot, V3, 1/2] Makefile: generate symbol list from u-boot
Tom Rini
- [U-Boot] [U-Boot,V3,2/2] test/py: run all "ut" subtests
Tom Rini
- [U-Boot] test/py: add docs for gdbserver and pytest options
Tom Rini
- [U-Boot] [U-Boot,1/2] test/py: don't import pexpect
Tom Rini
- [U-Boot] [U-Boot,2/2] Enable test/py for sandbox in Travis CI
Tom Rini
- [U-Boot] test/py: fix CONFIG_SPL test
Tom Rini
- [U-Boot] test/py: print summary in test order
Tom Rini
- [U-Boot] test/py: handle exceptions in console creation
Tom Rini
- [U-Boot] test/py: put "Starting U-Boot" into separate log section
Tom Rini
- [U-Boot] [PATCH 14/30] dm: part: Convert partition API use to linker lists
Tom Rini
- [U-Boot] [PATCH 13/30] dm: sandbox: Enable all partition types
Tom Rini
- [U-Boot] [PATCH 00/30] dm: Add driver-model support for block drivers
Tom Rini
- [U-Boot] [PATCH 14/16] sandbox: spi: Remove an incorrect free()
Tom Rini
- [U-Boot] OMAP3SOM BOARD: Auto detect Logic PD Models
Tom Rini
- [U-Boot] [ANN] U-Boot v2016.01-rc2 released
Tom Rini
- [U-Boot] [PATCH] ARM: rpi: increase CONFIG_SYS_MAXARGS
Tom Rini
- [U-Boot] [PATCH 00/26] spl: Support loading a FIT image containing U-Boot
Tom Rini
- [U-Boot] [PATCH 2/3] common: env_flags: include common.h even for HOST_CC
Tom Rini
- [U-Boot] [PATCH 00/26] spl: Support loading a FIT image containing U-Boot
Tom Rini
- [U-Boot] [PATCH 3/3] spi: omap3: Convert to driver model
Tom Rini
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Tom Rini
- [U-Boot] [PATCH] spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS, if available
Tom Rini
- [U-Boot] [PATCH] spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS, if available
Tom Rini
- [U-Boot] [PATCH] spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS, if available
Tom Rini
- [U-Boot] [PULL] u-boot-atmel/master -> u-boot/master
Tom Rini
- [U-Boot] [PATCH] dm: ns16550: Add support for reg-offset property
Tom Rini
- [U-Boot] Pull request: u-boot-net.git master
Tom Rini
- [U-Boot] Pull request, u-boot-tegra/master
Tom Rini
- [U-Boot] [U-Boot, V2] spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS
Tom Rini
- [U-Boot] [PATCH 1/5] board/BuR: drop ETH-support in SPL-Stage
Tom Rini
- [U-Boot] [PATCH 2/5] board/BuR: use default u-boot prompt on all B&R boards
Tom Rini
- [U-Boot] [PATCH 3/5] board/BuR: move everything possible from board's headerfile to KConfig
Tom Rini
- [U-Boot] [PATCH 4/5] board/BuR: split bur_am335x_common.h into am335x-specific and BuR common parts
Tom Rini
- [U-Boot] [PATCH 5/5] board/BuR/kwb: cosmetic changes
Tom Rini
- [U-Boot] [PATCH 04/10] arm: am437x: cm-t43: define prompt
Tom Rini
- [U-Boot] [PATCH 02/10] arm: am437x: cm-t43: migrate CONFIG_DM_SERIAL to config file
Tom Rini
- [U-Boot] [PATCH 01/10] arm: am437x: cm-t43: fix cm-t43 boot
Tom Rini
- [U-Boot] [PATCH 03/10] arm: am437x: cm-t43: support all available SPI flash chips
Tom Rini
- [U-Boot] [PATCH 08/10] arm: am437x: cm-t43: get rid of enable_vtt_regulator()
Tom Rini
- [U-Boot] [PATCH 10/10] arm: am437x: cm-t43: update parameters for raw mmc boot
Tom Rini
- [U-Boot] [PATCH 07/10] arm: am437x: cm-t43: set tps fseal bit
Tom Rini
- [U-Boot] [PATCH 06/10] pmic: tps65218: add useful functions and defines
Tom Rini
- [U-Boot] [PATCH 09/10] arm: am437x: cm-t43: set MPU and CORE voltages on boot
Tom Rini
- [U-Boot] [PATCH 05/10] arm: am437x: cm-t43: split board file
Tom Rini
- [U-Boot] Please pull ARC changes
Tom Rini
- [U-Boot] [PULL v2] u-boot-atmel/master -> u-boot/master
Tom Rini
- [U-Boot] [PATCH] arm: am437x: cm-t43: bring back BOOTDELAY feature
Tom Rini
- [U-Boot] Please pull u-boot-x86
Tom Rini
- [U-Boot] [PATCH] MAINTAINERS: Remove no longer valid maintainers' email addresses
Tom Rini
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Tom Rini
- [U-Boot] [U-Boot, v3, 3/3] kbuild: fix build rule of u-boot-spl.dtb
Tom Rini
- [U-Boot] Pull request: u-boot-spi/master
Tom Rini
- [U-Boot] [GIT PULL] Xilinx fixes
Tom Rini
- [U-Boot] Pull request: u-boot-video/master
Tom Rini
- [U-Boot] Please pull u-boot-sunxi master
Tom Rini
- [U-Boot] [U-Boot, v2, 3/7] drivers: block: disk-uclass: implement scsi_init()
Tom Rini
- [U-Boot] [PATCH v2 00/18] Add support for 96boards Dragonboard410C board
Tom Rini
- [U-Boot] [PATCH v3] test/py: Add option to skip SPL signature checking
Tom Rini
- [U-Boot] Please pull u-boot-fsl-qoriq master
Tom Rini
- [U-Boot] [PULL] u-boot-socfpga/master
Tom Rini
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] [PATCH] ARM: keystone2: Get rid of unused clock files
Tom Rini
- [U-Boot] [U-Boot,v2,07/18] usb: Rename ehci-fsl.h to ehci-ci.h
Tom Rini
- [U-Boot] [U-Boot, 1/4] gpio: stm32_gpio: move clock config from driver to board
Tom Rini
- [U-Boot] [U-Boot, 2/4] gpio: stm32_gpio: move base addresses to the soc file
Tom Rini
- [U-Boot] [U-Boot, 3/4] stm32x7: add support for stm32x7 serial driver
Tom Rini
- [U-Boot] [U-Boot, 4/4] stm32: add support for stm32f7 & stm32f746 discovery board
Tom Rini
- [U-Boot] Gracefully handle 64-bit signed-extended 32-bit Load addresses
Tom Rini
- [U-Boot] [U-Boot, 1/4] tools: -Wno-deprecated-declarations for OpenSSL on darwin
Tom Rini
- [U-Boot] [U-Boot,3/4] samsung: fix mkorigenspl for darwin
Tom Rini
- [U-Boot] [U-Boot, 4/4] pci_rom: fix may be used uninitialized warning
Tom Rini
- [U-Boot] [U-Boot, v3] test/py: only check for SPL signature if SPL uses serial output
Tom Rini
- [U-Boot] [U-Boot, V2] OMAP3SOM BOARD: Auto detect Logic PD Models
Tom Rini
- [U-Boot] [U-Boot,1/5] board/BuR: drop ETH-support in SPL-Stage
Tom Rini
- [U-Boot] [U-Boot, 2/5] board/BuR: use default u-boot prompt on all B&R boards
Tom Rini
- [U-Boot] [U-Boot, 3/5] board/BuR: move everything possible from board's headerfile to KConfig
Tom Rini
- [U-Boot] [U-Boot, 4/5] board/BuR: split bur_am335x_common.h into am335x-specific and BuR common parts
Tom Rini
- [U-Boot] [U-Boot,5/5] board/BuR/kwb: cosmetic changes
Tom Rini
- [U-Boot] [U-Boot,01/10] arm: am437x: cm-t43: fix cm-t43 boot
Tom Rini
- [U-Boot] [U-Boot, 02/10] arm: am437x: cm-t43: migrate CONFIG_DM_SERIAL to config file
Tom Rini
- [U-Boot] [U-Boot, 03/10] arm: am437x: cm-t43: support all available SPI flash chips
Tom Rini
- [U-Boot] [U-Boot,04/10] arm: am437x: cm-t43: define prompt
Tom Rini
- [U-Boot] [U-Boot,05/10] arm: am437x: cm-t43: split board file
Tom Rini
- [U-Boot] [U-Boot, 06/10] pmic: tps65218: add useful functions and defines
Tom Rini
- [U-Boot] [U-Boot,07/10] arm: am437x: cm-t43: set tps fseal bit
Tom Rini
- [U-Boot] [U-Boot, 08/10] arm: am437x: cm-t43: get rid of enable_vtt_regulator()
Tom Rini
- [U-Boot] [U-Boot, 09/10] arm: am437x: cm-t43: set MPU and CORE voltages on boot
Tom Rini
- [U-Boot] [U-Boot, 10/10] arm: am437x: cm-t43: update parameters for raw mmc boot
Tom Rini
- [U-Boot] arm: am437x: cm-t43: bring back BOOTDELAY feature
Tom Rini
- [U-Boot] [U-Boot, v2] MAINTAINERS: Update no longer valid maintainers' status
Tom Rini
- [U-Boot] tools: Update openrisc toolchain information
Tom Rini
- [U-Boot] booti: Help text rework.
Tom Rini
- [U-Boot] rpi: set board serial number in environment
Tom Rini
- [U-Boot] rpi: always scroll by 10 lines
Tom Rini
- [U-Boot] dm: Remove ARM dcc from the list
Tom Rini
- [U-Boot] cmd: mem: Show 64bit addresses which are tested
Tom Rini
- [U-Boot] microblaze: Add missing chosen node
Tom Rini
- [U-Boot] [PATCH v3] test/py: Add option to skip SPL signature checking
Tom Rini
- [U-Boot] Please pull u-boot-dm
Tom Rini
- [U-Boot] dm: Remove ARM dcc from the list
Tom Rini
- [U-Boot] [U-Boot,v2,1/2] serial: dcc: Move driver to DM
Tom Rini
- [U-Boot] [U-Boot, v2, 2/2] ARM: zynq: zynqmp: Enable DCC serial driver by default
Tom Rini
- [U-Boot] [PATCH] sniper: Various minor cleanups, missing Kconfig configs and reorganisation
Tom Rini
- [U-Boot] ARM: rpi: increase CONFIG_SYS_MAXARGS
Tom Rini
- [U-Boot] [U-Boot, RESEND] test/py: use space to interrupt autoboot
Tom Rini
- [U-Boot] [U-Boot, RESEND] test/py: skip tests that require large CONFIG_SYS_MAXARGS
Tom Rini
- [U-Boot] [PATCH 2/3] arm: dra7xx: Define Android partition table
Tom Rini
- [U-Boot] [PATCH 1/9] cbfs: Update a function to be static
Tom Rini
- [U-Boot] [PATCH 2/9] Add an option to enable the command line
Tom Rini
- [U-Boot] [PATCH 3/9] arm: x86: Drop command-line code when CONFIG_CMDLINE is disabled
Tom Rini
- [U-Boot] [PATCH 4/9] sandbox: Avoid calling commands when not available
Tom Rini
- [U-Boot] [PATCH 6/9] Hang when no command line processing can be performed
Tom Rini
- [U-Boot] [PATCH 7/9] Allow command code to compile to nothing
Tom Rini
- [U-Boot] [PATCH 8/9] Allow command-line files to be dropped
Tom Rini
- [U-Boot] [PATCH 5/9] Drop command-processing code when CONFIG_CMDLINE is disabled
Tom Rini
- [U-Boot] [PATCH 9/9] Drop various features when the command line is not available
Tom Rini
- [U-Boot] [PATCH 6/9] Hang when no command line processing can be performed
Tom Rini
- [U-Boot] [PATCH 1/6] ARM: keystone2: Use macro for DSP GEM power domain
Tom Rini
- [U-Boot] [PATCH 2/6] ARM: keystone2: K2G: power-off DSP during boot
Tom Rini
- [U-Boot] [PATCH 3/6] ARM: keystone2: Allow for board specific speed definitions
Tom Rini
- [U-Boot] [PATCH 4/6] ARM: keystone2: K2G: Add support for different arm/device speeds
Tom Rini
- [U-Boot] [PATCH 5/6] ARM: keystone2: use SPD info to configure K2HK and K2E DDR3
Tom Rini
- [U-Boot] [PATCH 6/6] ARM: keystone2: use detected ddr3a size
Tom Rini
- [U-Boot] [PATCH V5 1/7] ARM: OMAP4/5: Centralize early clock initialization
Tom Rini
- [U-Boot] [PATCH V5 2/7] ARM: OMAP4/5: Centralize gpi2c_init
Tom Rini
- [U-Boot] [PATCH V5 3/7] ARM: omap-common: Add standard access for board description EEPROM
Tom Rini
- [U-Boot] [PATCH V5 4/7] ti: AM335x: Use generic EEPROM detection logic
Tom Rini
- [U-Boot] [PATCH V5 5/7] ti: AM437x: Use generic EEPROM detection logic
Tom Rini
- [U-Boot] [PATCH V5 6/7] ARM: OMAP4/5: Add generic board detection hook
Tom Rini
- [U-Boot] [PATCH V5 7/7] board: ti: AM57xx: Add detection logic for AM57xx-evm
Tom Rini
- [U-Boot] [PATCH V5 0/7] ARM: omap-common: Add board detection support for TI EVMs
Tom Rini
- [U-Boot] [PATCH V2 1/6] ARM: keystone2: psc: redo doc in kernel-doc format
Tom Rini
- [U-Boot] [PATCH V2 2/6] ARM: keystone2: psc-defs: use adequate () for macros
Tom Rini
- [U-Boot] [PATCH V2 3/6] ARM: keystone2: psc: introduce function to hold and release module in reset.
Tom Rini
- [U-Boot] [PATCH V2 4/6] remoteproc: Add support for TI power processor
Tom Rini
- [U-Boot] [PATCH V2 5/6] ARM: dts: k2g: Add support for PMMC
Tom Rini
- [U-Boot] [PATCH V2 6/6] configs: k2g_evm: Add TI power processor support
Tom Rini
- [U-Boot] Please pull u-boot-mpc85xx master
Tom Rini
- [U-Boot] [PATCH] usb: ehci: Fix warning on aarch64
Tom Rini
- [U-Boot] [PATCH V2 5/6] ARM: dts: k2g: Add support for PMMC
Tom Rini
- [U-Boot] Pull request: u-boot-net.git master
Tom Rini
- [U-Boot] [PATCH] arm: dra7xx: Define Android partition table
Tom Rini
- [U-Boot] Please pull u-boot-dm
Tom Rini
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] [PATCH 0/3] device model bringup of AM335x bbw and sk-evm
Tom Rini
- [U-Boot] pull request: u-boot-uniphier/master
Tom Rini
- [U-Boot] [PATCH 03/17] drivers: usb: musb: add ti musb misc driver for wrapper
Tom Rini
- [U-Boot] [PATCH 05/17] drivers: usb: musb: adopt musb backend driver to driver model
Tom Rini
- [U-Boot] [PATCH] Revert "dm: ns16550: Add support for reg-offset property"
Tom Rini
- [U-Boot] [PATCH] Revert "dm: ns16550: Add support for reg-offset property"
Tom Rini
- [U-Boot] [PATCH] compiler*.h: sync include/linux/compiler*.h with Linux 4.5-rc6
Tom Rini
- [U-Boot] [PATCH] amcc-common.h: Disable CONFIG_SYS_LONGHELP
Tom Rini
- [U-Boot] [PATCH V2] OMAP3: Various: Update serial platdata to update reg_offset to 0
Tom Rini
- [U-Boot] [PATCH] rpi: set ethaddr as well
Lubomir Rintel
- [U-Boot] [PATCH] tools: fix env_flags build
Lubomir Rintel
- [U-Boot] [PATCH] ARM: rpi: set initrd_high
Lubomir Rintel
- [U-Boot] [PATCH v2] tools: fix env_flags build
Lubomir Rintel
- [U-Boot] [PATCH] rpi: set board serial number in environment
Lubomir Rintel
- [U-Boot] [PATCH] rpi: always scroll by 10 lines
Lubomir Rintel
- [U-Boot] [PATCH] fastboot: sparse: fix chunk write offset calculation
Maxime Ripard
- [U-Boot] [PATCH 2/2] fastboot: sparse: remove unnecessary logging
Maxime Ripard
- [U-Boot] [PATCH 2/2] fastboot: sparse: remove unnecessary logging
Maxime Ripard
- [U-Boot] [PATCH 2/2] fastboot: sparse: remove unnecessary logging
Maxime Ripard
- [U-Boot] [PATCH 2/2] fastboot: sparse: remove unnecessary logging
Maxime Ripard
- [U-Boot] (no subject)
Peter Robinson
- [U-Boot] [PATCH 1/3] Copy gcc5 over to compiler-gcc6.h as a beginning of support
Peter Robinson
- [U-Boot] [PATCH 2/3] common: env_flags: include common.h even for HOST_CC
Peter Robinson
- [U-Boot] your mail
Peter Robinson
- [U-Boot] [PATCH 2/3] common: env_flags: include common.h even for HOST_CC
Peter Robinson
- [U-Boot] [PATCH 2/3] common: env_flags: include common.h even for HOST_CC
Peter Robinson
- [U-Boot] DM ethernet driver with multiple interfaces per device
Stefan Roese
- [U-Boot] [PATCH] ppc: xilinx-ppc405-generic
Stefan Roese
- [U-Boot] [PATCH] net: phy: do not read configuration register on reset
Stefan Roese
- [U-Boot] [PATCH 1/2] net: phy: marvell: Call phy_reset() where possible
Stefan Roese
- [U-Boot] [PATCH 2/2] net: phy: marvell: Fix problem with phy_reset() clearing BMCR
Stefan Roese
- [U-Boot] [PATCH 1/2] arm: mx6: Add UART8 base address for i.MX6UL
Stefan Roese
- [U-Boot] [PATCH 2/2] arm: mx6: Add CCV xPress board support
Stefan Roese
- [U-Boot] [PATCH] mmc: show error message when "mmc dev" command fails
Stefan Roese
- [U-Boot] [PATCH] arm: socfpga: Enable ethernet PHY configuration to RGMII again
Stefan Roese
- [U-Boot] [PATCH] arm: socfpga: Fix ethernet reset handling
Stefan Roese
- [U-Boot] [PATCH] arm: socfpga: Enable ethernet PHY configuration to RGMII again
Stefan Roese
- [U-Boot] [PATCH] spi: kirkwood_spi: Add support for multiple chip-selects on MVEBU
Stefan Roese
- [U-Boot] [PATCH] gpio: Add DM GPIO driver for Marvell MVEBU
Stefan Roese
- [U-Boot] [PATCH] fpga: altera: Add StratixV support
Stefan Roese
- [U-Boot] [PATCH 1/3] arm: mvebu: Add some SPI CS attributes
Stefan Roese
- [U-Boot] [PATCH 2/3] arm: mvebu: spi.h: Add registers for direct write access
Stefan Roese
- [U-Boot] [PATCH 3/3] arm: mvebu: theadorable: Add StratixV FPGA programming support
Stefan Roese
- [U-Boot] [PATCH 3/3 v2] arm: mvebu: theadorable: Add StratixV FPGA programming support
Stefan Roese
- [U-Boot] [PATCH] gpio: Add DM GPIO driver for Marvell MVEBU
Stefan Roese
- [U-Boot] [PATCH] net: fix m88e1111s PHY auto negotiation timeout
Stefan Roese
- [U-Boot] Intel Braswell support
Stefan Roese
- [U-Boot] [PATCH] arm: socfpga: Fix SR1500 env position
Stefan Roese
- [U-Boot] [PATCH] ARM: zynq: Enable u-boot,dm-pre-reloc for qspi
Nathan Rossi
- [U-Boot] [PATCH 12/16] efi_loader: Add DCACHE_OFF support for arm64
Mark Rutland
- [U-Boot] [PATCH 03/16] efi_loader: Add PE image loader
Mark Rutland
- [U-Boot] [PATCH 01/10] thunderx: Calculate TCR dynamically
Mark Rutland
- [U-Boot] [PATCH 02/10] arm64: Make full va map code more dynamic
Mark Rutland
- [U-Boot] [PATCH 01/10] thunderx: Calculate TCR dynamically
Mark Rutland
- [U-Boot] cramfs and eMMC support
Ken Sallings
- [U-Boot] [PATCH v2] imx: imx7 Support for Manufacturing Protection
Otavio Salvador
- [U-Boot] [PATCH 0/2] tegra124: Add support for Avionic Design platform
Julian Scheel
- [U-Boot] [PATCH 1/2] power: as3722: Allow using on any i2c bus with any address
Julian Scheel
- [U-Boot] [PATCH 2/2] Add support the Avionic Design Meerkat COM and Kein Baseboard
Julian Scheel
- [U-Boot] [PATCH 0/2] tegra124: Add support for Avionic Design platform
Julian Scheel
- [U-Boot] [PATCH 2/2] Add support the Avionic Design Meerkat COM and Kein Baseboard
Julian Scheel
- [U-Boot] [PATCH 2/2] Add support the Avionic Design Meerkat COM and Kein Baseboard
Julian Scheel
- [U-Boot] Issue with USB mass storage (thumb drives)
Hannes Schmelzer
- [U-Boot] do i have any chance of booting a vxworks 5.5.2 image with u-boot?
Hannes Schmelzer
- [U-Boot] Issue with USB mass storage (thumb drives)
Hannes Schmelzer
- [U-Boot] [PATCH] image: fix getenv_bootm_size() function
Hannes Schmelzer
- [U-Boot] [PATCH] image: fix getenv_bootm_size() function
Hannes Schmelzer
- [U-Boot] [PATCH] image: fix getenv_bootm_size() function again
Hannes Schmelzer
- [U-Boot] how to change my name in patchwork?
Hannes Schmelzer
- [U-Boot] [PATCHv2] common/memsize.c: Simplify RAM size detection
Hannes Schmelzer
- [U-Boot] [PATCH] common/memsize.c: fix endless loop when saving
Hannes Schmelzer
- [U-Boot] [PATCH] common/memsize.c: fix endless loop when saving
Hannes Schmelzer
- [U-Boot] Using old Config Style
Hannes Schmelzer
- [U-Boot] trouble with patman
Hannes Schmelzer
- [U-Boot] Issue with USB mass storage (thumb drives)
Hannes Schmelzer
- [U-Boot] trouble with patman
Hannes Schmelzer
- [U-Boot] [PATCH] cmd/gpio: fix not working 'gpio set' command
Hannes Schmelzer
- [U-Boot] [PATCH] gpio: Correct handling of 'gpio status'
Hannes Schmelzer
- [U-Boot] [PATCH] cmd/gpio: fix not working 'gpio set' command
Hannes Schmelzer
- [U-Boot] [PATCH 1/5] board/BuR: drop ETH-support in SPL-Stage
Hannes Schmelzer
- [U-Boot] [PATCH 2/5] board/BuR: use default u-boot prompt on all B&R boards
Hannes Schmelzer
- [U-Boot] [PATCH 3/5] board/BuR: move everything possible from board's headerfile to KConfig
Hannes Schmelzer
- [U-Boot] [PATCH 4/5] board/BuR: split bur_am335x_common.h into am335x-specific and BuR common parts
Hannes Schmelzer
- [U-Boot] [PATCH 5/5] board/BuR/kwb: cosmetic changes
Hannes Schmelzer
- [U-Boot] SUN7i - bananapi Ethernet
Hannes Schmelzer
- [U-Boot] Issue with USB mass storage (thumb drives)
Hannes Schmelzer
- [U-Boot] [RFC PATCH v2] dfu: allow get_medium_size() to return bigger medium sizes than 2GiB
Heiko Schocher
- [U-Boot] [RFC PATCH v1] dfu: introduce dfu_mtd support
Heiko Schocher
- [U-Boot] UBI attach issues
Heiko Schocher
- [U-Boot] [PATCH v3 1/3] ARM: at91: clock: add PLLB enable/disable functions
Heiko Schocher
- [U-Boot] [PATCH v3 2/3] drivers: usb: ohci-at91: clean up the PLLB code
Heiko Schocher
- [U-Boot] [PATCH v3 3/3] board: atmel: siemens: clean up PLLB code
Heiko Schocher
- [U-Boot] UBI attach issues
Heiko Schocher
- [U-Boot] [RFC PATCH v1] dfu: introduce dfu_mtd support
Heiko Schocher
- [U-Boot] [PATCH] mtd, ubi: set free_count to zero before walking through erase list
Heiko Schocher
- [U-Boot] [RFC PATCH v2] dfu: allow get_medium_size() to return bigger medium sizes than 2GiB
Heiko Schocher
- [U-Boot] [PATCH] mtd, ubi: set free_count to zero before walking through erase list
Heiko Schocher
- [U-Boot] [PATCH] .travis.yml: explicitly request sudo
Heiko Schocher
- [U-Boot] [PATCH] .travis.yml: explicitly request sudo
Heiko Schocher
- [U-Boot] [PATCH v2] arm: use common instructions applicable to armv7m & other arm archs
Heiko Schocher
- [U-Boot] test, tools: introduce tbot README
Heiko Schocher
- [U-Boot] [PATCH 2/2] Enable test/py for sandbox in Travis CI
Heiko Schocher
- [U-Boot] [PATCH] arm: at91: Add support for DENX MA5D4 SoM and EVK
Heiko Schocher
- [U-Boot] [PATCH] test/py: only check for SPL signature if SPL uses serial output
Heiko Schocher
- [U-Boot] test/py main_signon
Heiko Schocher
- [U-Boot] test/py main_signon
Heiko Schocher
- [U-Boot] [PATCH v2] test/py: only check for SPL signature if SPL uses serial output
Heiko Schocher
- [U-Boot] test/py main_signon
Heiko Schocher
- [U-Boot] [PATCH v2] test/py: only check for SPL signature if SPL uses serial output
Heiko Schocher
- [U-Boot] [PATCH v3] test/py: only check for SPL signature if SPL uses serial output
Heiko Schocher
- [U-Boot] Problem with attaching UBI partition
Heiko Schocher
- [U-Boot] Problem with attaching UBI partition
Heiko Schocher
- [U-Boot] [PATCH V2] OMAP3: Various: Update serial platdata to update reg_offset to 0
Heiko Schocher
- [U-Boot] [PATCH V2] OMAP3: Various: Update serial platdata to update reg_offset to 0
Heiko Schocher
- [U-Boot] [PATCH 7/9] malta: Set I/O port base early
Daniel Schwierzeck
- [U-Boot] [PATCH 8/9] malta: Use I/O accessors for SuperI/O controller
Daniel Schwierzeck
- [U-Boot] [PATCH 5/9] MIPS: Remove SLOW_DOWN_IO
Daniel Schwierzeck
- [U-Boot] [PATCH 6/9] MIPS: Support dynamic I/O port base address
Daniel Schwierzeck
- [U-Boot] [PATCH 1/5] mips: cache: Bulletproof the code against cornercases
Daniel Schwierzeck
- [U-Boot] [PATCH v4 00/13] Initial Microchip PIC32MZ[DA] Support
Daniel Schwierzeck
- [U-Boot] [PATCH 1/5] mips: cache: Bulletproof the code against cornercases
Daniel Schwierzeck
- [U-Boot] [PULL] u-boot-mips/master
Daniel Schwierzeck
- [U-Boot] .travis.yml: rework according to new travis-ci infra
Daniel Schwierzeck
- [U-Boot] [PATCH] usb: dwc2: Enhance interrupt handling for CONTROL transaction
Chin Liang See
- [U-Boot] [PATCH] arm: socfpga: Enabling U-Boot environment support in QSPI
Chin Liang See
- [U-Boot] [PATCH] arm: socfpga: Enabling U-Boot environment support in QSPI
Chin Liang See
- [U-Boot] [PATCH] arm: socfpga: Enabling U-Boot environment support in QSPI
Chin Liang See
- [U-Boot] [PATCH] sunxi: power: add support for sy8106a driver
Siarhei Siamashka
- [U-Boot] Converting arm_dcc to driver model
Michal Simek
- [U-Boot] [PATCH] serial: zynq: Change logic in putc
Michal Simek
- [U-Boot] [PATCH] ARM: zynq: Remove unused SPI base addresses
Michal Simek
- [U-Boot] [PATCH 1/4] zynq: zc770: Remove unused ifdefs for xm011 and xm013
Michal Simek
- [U-Boot] [PATCH 2/4] mmc: Kconfig: Add Arasan SDHCI entry
Michal Simek
- [U-Boot] [PATCH 3/4] ARM: zynq: Read memory size setting from DT
Michal Simek
- [U-Boot] [PATCH 4/4] ARM: zynq: Remove ZYNQ_BOOT_FREEBSD option
Michal Simek
- [U-Boot] [PATCH] usb: gadget: f_thor: free the allocated out request buffer
Michal Simek
- [U-Boot] RealTek RTL8211E u-boot driver
Michal Simek
- [U-Boot] [PATCH] fdt: Try to read #address-cells/size-cells from parent
Michal Simek
- [U-Boot] [PATCH 1/6] net: gem: Add support for reading MAC from I2C EEPROM
Michal Simek
- [U-Boot] [PATCH 2/6] ARM: zynq: zybo: Enabling reading MAC address from EEPROM
Michal Simek
- [U-Boot] [PATCH 3/6] net: phy: realtek: Use generic genphy_parse_link() for RTL8211E
Michal Simek
- [U-Boot] [PATCH 4/6] ARM: zynq: Enable Realtek phys by default
Michal Simek
- [U-Boot] [PATCH 5/6] ARM: zynq: Add reset-gpio property for USB on Zybo
Michal Simek
- [U-Boot] [PATCH 6/6] ARM: zynq: Enable EDID for zybo
Michal Simek
- [U-Boot] [PATCH] ARM: zynq: Wire-up saving environment to QSPI
Michal Simek
- [U-Boot] [PATCH 1/6] net: gem: Add support for reading MAC from I2C EEPROM
Michal Simek
- [U-Boot] [PATCH 1/6] net: gem: Add support for reading MAC from I2C EEPROM
Michal Simek
- [U-Boot] [PATCH 1/3] phy: Add phy driver support for xilinx PCS/PMA core
Michal Simek
- [U-Boot] [PATCH 2/3] net: zynq_gem: Add support for SGMII interface
Michal Simek
- [U-Boot] [PATCH 3/3] zynq-common: Enable phy driver for Xilinx PCS/PMA core
Michal Simek
- [U-Boot] [PATCH] fdt: Try to read #address-cells/size-cells from parent
Michal Simek
- [U-Boot] [PATCH] i2c: spd: Extend SPD memory types
Michal Simek
- [U-Boot] [PATCH 1/6] net: gem: Add support for reading MAC from I2C EEPROM
Michal Simek
- [U-Boot] [PATCH 1/6] net: gem: Add support for reading MAC from I2C EEPROM
Michal Simek
- [U-Boot] [PATCH 1/6] net: gem: Add support for reading MAC from I2C EEPROM
Michal Simek
- [U-Boot] test/py main_signon
Michal Simek
- [U-Boot] [PATCH] dm: ns16550: Add support for reg-offset property
Michal Simek
- [U-Boot] [PATCH] ARM: zynq: Enable u-boot, dm-pre-reloc for qspi
Michal Simek
- [U-Boot] test/py main_signon
Michal Simek
- [U-Boot] [PATCH] fdt: Try to read #address-cells/size-cells from parent
Michal Simek
- [U-Boot] test/py main_signon
Michal Simek
- [U-Boot] test/py main_signon
Michal Simek
- [U-Boot] [PATCH] ARM: zynq: Enable SPL RAM support by default
Michal Simek
- [U-Boot] test/py main_signon
Michal Simek
- [U-Boot] [PATCH 1/2] serial: dcc: Move driver to DM
Michal Simek
- [U-Boot] [PATCH 2/2] ARM: zynq: zynqmp: Enable DCC serial driver by default
Michal Simek
- [U-Boot] [PATCH] dm: ns16550: Add support for reg-offset property
Michal Simek
- [U-Boot] [PATCH] test/py: Add option to skip SPL signature checking
Michal Simek
- [U-Boot] [PATCH] zynq-common: Fix usbboot env variable
Michal Simek
- [U-Boot] [PATCH 3/6] net: phy: realtek: Use generic genphy_parse_link() for RTL8211E
Michal Simek
- [U-Boot] [PATCH 4/6] ARM: zynq: Enable Realtek phys by default
Michal Simek
- [U-Boot] [PATCH 5/6] ARM: zynq: Add reset-gpio property for USB on Zybo
Michal Simek
- [U-Boot] [PATCH 6/6] ARM: zynq: Enable EDID for zybo
Michal Simek
- [U-Boot] [PATCH] ARM: zynq: Wire-up saving environment to QSPI
Michal Simek
- [U-Boot] [PATCH] ARM: zynq: Wire-up saving environment to QSPI
Michal Simek
- [U-Boot] [PATCH 2/2] ARM: zynq: zynqmp: Enable DCC serial driver by default
Michal Simek
- [U-Boot] [U-Boot, v3, 3/3] kbuild: fix build rule of u-boot-spl.dtb
Michal Simek
- [U-Boot] [GIT PULL] Xilinx fixes
Michal Simek
- [U-Boot] [PATCH 1/2] serial: dcc: Move driver to DM
Michal Simek
- [U-Boot] [U-Boot, v3, 3/3] kbuild: fix build rule of u-boot-spl.dtb
Michal Simek
- [U-Boot] [U-Boot, v3, 3/3] kbuild: fix build rule of u-boot-spl.dtb
Michal Simek
- [U-Boot] [PATCH 1/2] serial: dcc: Move driver to DM
Michal Simek
- [U-Boot] [PATCH v2 1/2] serial: dcc: Move driver to DM
Michal Simek
- [U-Boot] [PATCH v2 2/2] ARM: zynq: zynqmp: Enable DCC serial driver by default
Michal Simek
- [U-Boot] [PATCH] test/py: Add option to skip SPL signature checking
Michal Simek
- [U-Boot] [PATCH v2] test/py: Add option to skip SPL signature checking
Michal Simek
- [U-Boot] [PATCH 4/9] tegra: Replace home grown mmu code with generic table approach
Michal Simek
- [U-Boot] [PATCH 3/9] zymqmp: Replace home grown mmu code with generic table approach
Michal Simek
- [U-Boot] [PATCH 3/9] zymqmp: Replace home grown mmu code with generic table approach
Michal Simek
- [U-Boot] [PATCH] dm: Remove ARM dcc from the list
Michal Simek
- [U-Boot] [PATCH] cmd: mem: Show 64bit addresses which are tested
Michal Simek
- [U-Boot] [PATCH] dm: ns16550: Add support for reg-offset property
Michal Simek
- [U-Boot] [PATCH] microblaze: Add missing chosen node
Michal Simek
- [U-Boot] [PATCH 00/10] arm64: Unify MMU code
Michal Simek
- [U-Boot] [PATCH 1/2] net: gem: Allow to set the MAC from an EEPROM
Michal Simek
- [U-Boot] [PATCH 2/2] ARM: zynq: zybo: Enabling reading MAC address from EEPROM
Michal Simek
- [U-Boot] [PATCH] dm: ns16550: Add support for reg-offset property
Michal Simek
- [U-Boot] [PATCH] ARM: zynq: Enable option to overwrite default variables
Michal Simek
- [U-Boot] [PATCH v3] test/py: Add option to skip SPL signature checking
Michal Simek
- [U-Boot] [PATCH v2] test/py: Add option to skip SPL signature checking
Michal Simek
- [U-Boot] [PATCH v3] test/py: Add option to skip SPL signature checking
Michal Simek
- [U-Boot] dm: Remove ARM dcc from the list
Michal Simek
- [U-Boot] dm: Remove ARM dcc from the list
Michal Simek
- [U-Boot] [PATCH 3/9] zymqmp: Replace home grown mmu code with generic table approach
Michal Simek
- [U-Boot] [PATCH] dm: ns16550: Add support for reg-offset property
Michal Simek
- [U-Boot] [PATCH v2 00/12] Add support for Rockchip RK3288 Ethernet
Sjoerd Simons
- [U-Boot] [PATCH v2 01/12] net: designware: support phy reset device-tree bindings
Sjoerd Simons
- [U-Boot] [PATCH v2 02/12] net: designware: Export various functions/struct to allow subclassing
Sjoerd Simons
- [U-Boot] [PATCH v2 03/12] net: designware: Add a fix_mac_speed hook
Sjoerd Simons
- [U-Boot] [PATCH v2 04/12] rockchip: rk3288: pinctrl: support more pins
Sjoerd Simons
- [U-Boot] [PATCH v2 05/12] rockchip: rk3288: Add clock support for the gmac ethernet interface
Sjoerd Simons
- [U-Boot] [PATCH v2 06/12] rockchip: rk3288: grf: Define GRF_SOC_CON1 and GRF_SOC_CON3
Sjoerd Simons
- [U-Boot] [PATCH v2 07/12] net: gmac_rk3288: Add RK3288 GMAC driver
Sjoerd Simons
- [U-Boot] [PATCH v2 08/12] rockchip: rk3288-firefly: Add gmac definition
Sjoerd Simons
- [U-Boot] [PATCH v2 09/12] rockchip: rock2: dts: use status = "okay" not ok
Sjoerd Simons
- [U-Boot] [PATCH v2 10/12] rockchip: Enable networking support on rock2 and firefly
Sjoerd Simons
- [U-Boot] [PATCH v2 11/12] rockchip: Add PXE and DHCP to the default boot targets
Sjoerd Simons
- [U-Boot] [PATCH v2 12/12] rockchip: Drop Ethernet from the TODO
Sjoerd Simons
- [U-Boot] [PATCH] RFC: rockchip: video: Lower hpd wait time
Sjoerd Simons
- [U-Boot] [PATCH] gpio: Add DM GPIO driver for Marvell MVEBU
Kevin Smith
- [U-Boot] [PATCH 1/2] tools: kwboot: Clean up usage text
Kevin Smith
- [U-Boot] [PATCH 2/2] tools: kwboot: Add xmodem timeout option
Kevin Smith
- [U-Boot] [PATCH] gpio: Add DM GPIO driver for Marvell MVEBU
Kevin Smith
- [U-Boot] [PATCH ] board: ls2080a: Add "mcinitcmd" env for MC & DPL deployment
Pratiyush Srivastava
- [U-Boot] [PATCH] armv8: ls2080: Update SerDes2 table for 0x45 & 0x47 protocol
Pratiyush Mohan Srivastava
- [U-Boot] [PATCH] armv8: fsl-layerscape: Updating entries in Serdes Table
Pratiyush Mohan Srivastava
- [U-Boot] [PATCH v3]net: Wrong Initialization in davinci-emac driver
Vishwas Srivastava
- [U-Boot] [RFC PATCH v1 0/2] Convert ls1021aqds to use driver model for serial ports
York Sun
- [U-Boot] [RFC PATCH v1 1/2] arm: ls1021aqds: Convert to driver model and enable serial support
York Sun
- [U-Boot] [RFC PATCH v1 2/2] arm: ls1021aqds: Enable driver model lpuart serial driver
York Sun
- [U-Boot] [RFC PATCH v4 0/3] Enable FIT image to be loaded beyond 32-bit space
York Sun
- [U-Boot] [RFC PATCH v4 1/3] sandbox: Fix compiling warning on 32-bit host
York Sun
- [U-Boot] [RFC PATCH v4 2/3] common: Convert ulong to phys_addr_t for image addresses
York Sun
- [U-Boot] [RFC PATCH v4 3/3] common: Fix load and entry addresses in FIT image
York Sun
- [U-Boot] [PATCH v2 0/2] Convert ls1021aqds to use driver model for serial ports
York Sun
- [U-Boot] [PATCH v2 1/2] arm: ls1021aqds: Convert to driver model and enable serial support
York Sun
- [U-Boot] [PATCH v2 2/2] arm: ls1021aqds: Enable driver model lpuart serial driver
York Sun
- [U-Boot] [RFC PATCH v5 0/4] Enable FIT image to be loaded beyond 32-bit space
York Sun
- [U-Boot] [RFC PATCH v5 1/4] common: Convert ulong to phys_addr_t for image addresses
York Sun
- [U-Boot] [RFC PATCH v5 2/4] sandbox: Fix compiling warning
York Sun
- [U-Boot] [RFC PATCH v5 3/4] common: image-fit: Use a common function to get address
York Sun
- [U-Boot] [RFC PATCH v5 4/4] common: image-fit: Fix load and entry addresses in FIT image
York Sun
- [U-Boot] [PATCH 01/23] spi: ich: Some clean up
Jagan Teki
- [U-Boot] [PATCH 02/23] spi: ich: Use compatible strings to distinguish controller version
Jagan Teki
- [U-Boot] [PATCH 03/23] spi: ich: Change PCHV_ to ICHV_
Jagan Teki
- [U-Boot] [PATCH] arm: socfpga: Fix booting from QSPI flash on socdk board.
Jagan Teki
- [U-Boot] [PATCHv2 5/8] arm: vybrid: Drop enabling GPIO, UART and SPI in legacy mode
Jagan Teki
- [U-Boot] [PATCH] fsl_qspi: fix address mask issue
Jagan Teki
- [U-Boot] [PATCH] ARM: zynq: Remove unused SPI base addresses
Jagan Teki
- [U-Boot] [PATCH] x86: Clean up SPI flash drivers in defconfig
Jagan Teki
- [U-Boot] [PATCH 3/4] spi: omap3: Convert to DM
Jagan Teki
- [U-Boot] [PATCH v2 02/18] gpio: Add support for Qualcomm gpio controller
Jagan Teki
- [U-Boot] [PATCH v2 03/18] mmc: Add support for Qualcomm SDHCI controller
Jagan Teki
- [U-Boot] [PATCH v2 13/18] drivers: spmi: Add support for Qualcomm SPMI bus driver
Jagan Teki
- [U-Boot] [PATCH v2 15/18] gpio: Add support for Qualcomm PM8916 gpios
Jagan Teki
- [U-Boot] [PATCH v2 16/18] arm: Add support for Qualcomm Snapdragon family
Jagan Teki
- [U-Boot] [PATCH v2 17/18] board: Add Qualcomm Dragonboard 410C support
Jagan Teki
- [U-Boot] [PATCH v5 00/32] mtd: Add SPI-NOR core support
Jagan Teki
- [U-Boot] [PATCH v5 01/32] mtd: Add m25p80 driver
Jagan Teki
- [U-Boot] [PATCH v5 02/32] mtd: Add Kconfig entry for MTD_M25P80
Jagan Teki
- [U-Boot] [PATCH v5 03/32] mtd: Add SPI-NOR core support
Jagan Teki
- [U-Boot] [PATCH v5 04/32] doc: device-tree-bindings: jedec, spi-nor
Jagan Teki
- [U-Boot] [PATCH v5 05/32] mtd: spi-nor: Add Kconfig entry for MTD_SPI_NOR
Jagan Teki
- [U-Boot] [PATCH v5 06/32] mtd: spi-nor: Add kconfig for MTD_SPI_NOR_USE_4K_SECTORS
Jagan Teki
- [U-Boot] [PATCH v5 07/32] mtd: spi-nor: Add MTD support
Jagan Teki
- [U-Boot] [PATCH v5 08/32] mtd: spi-nor: Add spi_nor support in m25p80
Jagan Teki
- [U-Boot] [PATCH v5 09/32] mtd: spi-nor: Add dm spi-nor probing
Jagan Teki
- [U-Boot] [PATCH v5 10/32] mtd: spi-nor: Add spi_flash_probe for mtd-dm-spi-nor
Jagan Teki
- [U-Boot] [PATCH v5 11/32] cmd: sf: Add mtd_info for mtd-dm-spi-nor code
Jagan Teki
- [U-Boot] [PATCH v5 12/32] mtd: spi-nor: m25p80: Add spi_nor support for non-dm
Jagan Teki
- [U-Boot] [PATCH v5 13/32] spi_flash: Use mtd_info operation for non-dm
Jagan Teki
- [U-Boot] [PATCH v5 14/32] mtd: spi-nor: Move spi_read_then_write to spi layer
Jagan Teki
- [U-Boot] [PATCH v5 15/32] spi: Rename spi_read_then_write to spi_write_then_read
Jagan Teki
- [U-Boot] [PATCH v5 16/32] spi: Drop mode_rx
Jagan Teki
- [U-Boot] [PATCH v5 17/32] spi: Drop SPI_RX_FAST
Jagan Teki
- [U-Boot] [PATCH v5 18/32] mtd: spi-nor: Rename SPI_FLASH_BAR to SPI_NOR_BAR
Jagan Teki
- [U-Boot] [PATCH v5 19/32] mtd: spi-nor: Add Kconfig entry for SPI_NOR_BAR
Jagan Teki
- [U-Boot] [PATCH v5 20/32] mtd: spi-nor: Copy spl files from drivers/mtd/spi
Jagan Teki
- [U-Boot] [PATCH v5 21/32] mtd: spi-nor: spl: Follow ascending order of include headers
Jagan Teki
- [U-Boot] [PATCH v5 22/32] mtd: spi-nor: fsl_espi_spl: Use mtd_info
Jagan Teki
- [U-Boot] [PATCH v5 23/32] mtd: spi-nor: spi_spl_load: Use mtd_info
Jagan Teki
- [U-Boot] [PATCH v5 24/32] mtd: spi-nor: Add flash vendor Kconfig entries
Jagan Teki
- [U-Boot] [PATCH v5 25/32] arm: zynq: Kconfig: Select MTD uclass
Jagan Teki
- [U-Boot] [PATCH v5 26/32] arm: zynq: Kconfig: Drop DM_SPI_FLASH
Jagan Teki
- [U-Boot] [PATCH v5 27/32] defconfigs: zynq_microzed: Drop CONFIG_SPI_FLASH
Jagan Teki
- [U-Boot] [PATCH v5 28/32] defconfig: zynq_microzed: Enable CONFIG_MTD_M25P80
Jagan Teki
- [U-Boot] [PATCH v5 29/32] defconfig: zynq_microzed: Enable CONFIG_MTD_SPI_NOR
Jagan Teki
- [U-Boot] [PATCH v5 30/32] spl: Add CONFIG_SPL_SPI_NOR_SUPPORT
Jagan Teki
- [U-Boot] [PATCH v5 31/32] configs: zynq: Use CONFIG_SPL_SPI_NOR_SUPPORT
Jagan Teki
- [U-Boot] [PATCH v5 32/32] configs: zynq: Use CONFIG_SPL_MTD_SUPPORT
Jagan Teki
- [U-Boot] [PATCH 3/4] spi: omap3: Convert to DM
Jagan Teki
- [U-Boot] [PATCH 1/4] spi: omap3: Remove unused variable irqstatus in omap3_spi_txrx
Jagan Teki
- [U-Boot] [PATCH 2/4] spi: spi-uclass: Set slave wordlen with SPI_DEFAULT_WORDLEN
Jagan Teki
- [U-Boot] [PATCH] am43xx: qspi: Fix config to select SPI mode
Jagan Teki
- [U-Boot] [PATCH 3/4] spi: omap3: Convert to DM
Jagan Teki
- [U-Boot] [PATCH 1/2] arm: socfpga: av_socdk: Add support for QSPI boot
Jagan Teki
- [U-Boot] [PATCH 2/2] arm: socfpga: cv_socdk: Add support for QSPI boot
Jagan Teki
- [U-Boot] [PATCH 3/4] spi: omap3: Convert to DM
Jagan Teki
- [U-Boot] [PATCH 1/3] spi: omap3: Move headers code inside the driver
Jagan Teki
- [U-Boot] [PATCH 2/3] spi: omap3: Make local functions as static
Jagan Teki
- [U-Boot] [PATCH 3/3] spi: omap3: Convert to driver model
Jagan Teki
- [U-Boot] [PATCH 00/12] mtd: dataflash: Add UCLASS_MTD
Jagan Teki
- [U-Boot] [PATCH 01/12] mtd: spi-nor: Copy sf_dataflash
Jagan Teki
- [U-Boot] [PATCH 02/12] mtd: dataflash: Remove unneeded spi data
Jagan Teki
- [U-Boot] [PATCH 03/12] mtd: dataflash: Move flash id detection into jedec_probe
Jagan Teki
- [U-Boot] [PATCH 04/12] mtd: dataflash: Fix add_dataflash return logic
Jagan Teki
- [U-Boot] [PATCH 05/12] mtd: dataflash: Add UCLASS_MTD support
Jagan Teki
- [U-Boot] [PATCH 06/12] mtd: dataflash: Use spi_write_then_read
Jagan Teki
- [U-Boot] [PATCH 07/12] mtd: dataflash: Drop sf_internal.h
Jagan Teki
- [U-Boot] [PATCH 08/12] mtd: dataflash: Minor cleanups
Jagan Teki
- [U-Boot] [PATCH 09/12] mtd: Rename sf_dataflash.c to mtd_dataflash.c
Jagan Teki
- [U-Boot] [PATCH v3 5/6] drivers: dma: ti-edma3: convert driver to adopt driver model
Jagan Teki
- [U-Boot] [PATCHv7 2/2] sf: Turn SPI flash chip into 3-Byte address mode
Jagan Teki
- [U-Boot] [PATCH] x86: Clean up SPI flash drivers in defconfig
Jagan Teki
- [U-Boot] [PATCH 01/12] mtd: spi-nor: Copy sf_dataflash
Jagan Teki
- [U-Boot] [PATCH] x86: Clean up SPI flash drivers in defconfig
Jagan Teki
- [U-Boot] [PATCH] spi: kirkwood_spi: Add support for multiple chip-selects on MVEBU
Jagan Teki
- [U-Boot] [PATCH 1/3] spi: omap3: Move headers code inside the driver
Jagan Teki
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Jagan Teki
- [U-Boot] [PATCH v6 01/76] mtd: Add m25p80 driver
Jagan Teki
- [U-Boot] [PATCH v6 02/76] mtd: Add Kconfig entry for MTD_M25P80
Jagan Teki
- [U-Boot] [PATCH v6 03/76] mtd: Add SPI-NOR core support
Jagan Teki
- [U-Boot] [PATCH v6 04/76] doc: device-tree-bindings: jedec, spi-nor
Jagan Teki
- [U-Boot] [PATCH v6 05/76] mtd: spi-nor: Add Kconfig entry for MTD_SPI_NOR
Jagan Teki
- [U-Boot] [PATCH v6 06/76] mtd: spi-nor: Add kconfig for MTD_SPI_NOR_USE_4K_SECTORS
Jagan Teki
- [U-Boot] [PATCH v6 07/76] mtd: spi-nor: Add MTD support
Jagan Teki
- [U-Boot] [PATCH v6 08/76] mtd: spi-nor: Add spi_nor support in m25p80
Jagan Teki
- [U-Boot] [PATCH v6 09/76] mtd: spi-nor: Add dm spi-nor probing
Jagan Teki
- [U-Boot] [PATCH v6 10/76] mtd: spi-nor: Add spi_flash_probe for mtd-dm-spi-nor
Jagan Teki
- [U-Boot] [PATCH v6 11/76] mtd: spi-nor: Add spi_flash_free for mtd-dm-spi-nor
Jagan Teki
- [U-Boot] [PATCH v6 12/76] mtd: spi-nor: m25p80: Add spi_nor support for non-dm
Jagan Teki
- [U-Boot] [PATCH v6 13/76] sf: Rename erase_size to erasesize
Jagan Teki
- [U-Boot] [PATCH v6 14/76] sf: Use erasesize instead of sector_size
Jagan Teki
- [U-Boot] [PATCH v6 15/76] sf: Use uint64_t for flash->size
Jagan Teki
- [U-Boot] [PATCH v6 16/76] spi_flash: Use mtd_info operation for SPI-NOR
Jagan Teki
- [U-Boot] [PATCH v6 17/76] spi_flash: Use spi_flash_t instead of struct spi_flash
Jagan Teki
- [U-Boot] [PATCH v6 18/76] mtd: spi-nor: Move spi_read_then_write to spi layer
Jagan Teki
- [U-Boot] [PATCH v6 19/76] spi: Rename spi_read_then_write to spi_write_then_read
Jagan Teki
- [U-Boot] [PATCH v6 20/76] mtd: spi-nor: Rename SPI_FLASH_BAR to SPI_NOR_BAR
Jagan Teki
- [U-Boot] [PATCH v6 21/76] mtd: spi-nor: Add Kconfig entry for SPI_NOR_BAR
Jagan Teki
- [U-Boot] [PATCH v6 22/76] mtd: spi-nor: Copy spl files from drivers/mtd/spi
Jagan Teki
- [U-Boot] [PATCH v6 23/76] mtd: spi-nor: spl: Follow ascending order of include headers
Jagan Teki
- [U-Boot] [PATCH v6 24/76] mtd: spi-nor: fsl_espi_spl: Use mtd_info
Jagan Teki
- [U-Boot] [PATCH v6 25/76] mtd: spi-nor: spi_spl_load: Use mtd_info
Jagan Teki
- [U-Boot] [PATCH v6 26/76] mtd: spi-nor: Add flash vendor Kconfig entries
Jagan Teki
- [U-Boot] [PATCH v6 27/76] arm: zynq: Kconfig: Select MTD uclass
Jagan Teki
- [U-Boot] [PATCH v6 28/76] arm: zynq: Kconfig: Drop DM_SPI_FLASH
Jagan Teki
- [U-Boot] [PATCH v6 29/76] defconfigs: zynq_microzed: Drop CONFIG_SPI_FLASH
Jagan Teki
- [U-Boot] [PATCH v6 30/76] defconfig: zynq_microzed: Enable CONFIG_MTD_M25P80
Jagan Teki
- [U-Boot] [PATCH v6 31/76] defconfig: zynq_microzed: Enable CONFIG_MTD_SPI_NOR
Jagan Teki
- [U-Boot] [PATCH v6 32/76] spl: Add CONFIG_SPL_SPI_NOR_SUPPORT
Jagan Teki
- [U-Boot] [PATCH v6 33/76] configs: zynq: Use CONFIG_SPL_SPI_NOR_SUPPORT
Jagan Teki
- [U-Boot] [PATCH v6 34/76] configs: zynq: Use CONFIG_SPL_MTD_SUPPORT
Jagan Teki
- [U-Boot] [PATCH v6 35/76] mtd: spi-nor: Copy sf_dataflash
Jagan Teki
- [U-Boot] [PATCH v6 36/76] mtd: dataflash: Remove unneeded spi data
Jagan Teki
- [U-Boot] [PATCH v6 37/76] mtd: dataflash: Move flash id detection into jedec_probe
Jagan Teki
- [U-Boot] [PATCH v6 38/76] mtd: dataflash: Fix add_dataflash return logic
Jagan Teki
- [U-Boot] [PATCH v6 39/76] mtd: dataflash: Add UCLASS_MTD support
Jagan Teki
- [U-Boot] [PATCH v6 40/76] mtd: dataflash: Use spi_write_then_read
Jagan Teki
- [U-Boot] [PATCH v6 41/76] mtd: dataflash: Drop sf_internal.h
Jagan Teki
- [U-Boot] [PATCH v6 42/76] mtd: dataflash: Minor cleanups
Jagan Teki
- [U-Boot] [PATCH v6 43/76] mtd: Rename sf_dataflash.c to mtd_dataflash.c
Jagan Teki
- [U-Boot] [PATCH v6 44/76] mtd: spi-nor: Add Kconfig entry for mtd_dataflash
Jagan Teki
- [U-Boot] [PATCH v6 45/76] mtd: dataflash: Add MTD_DATAFLASH_WRITE_VERIFY
Jagan Teki
- [U-Boot] [PATCH v6 46/76] mtd: spi-nor: Add kconfig MTD_DATAFLASH_WRITE_VERIFY
Jagan Teki
- [U-Boot] [PATCH v6 47/76] configs: ls1021aqds: Drop DM_SPI_FLASH and DATAFLASH
Jagan Teki
- [U-Boot] [PATCH v6 48/76] defconfig: ls1021aqds_qspi: Enable SPI-NOR
Jagan Teki
- [U-Boot] [PATCH v6 49/76] defconfig: ls1021aqds_qspi: Enable CONFIG_MTD_DATAFLASH
Jagan Teki
- [U-Boot] [PATCH v6 50/76] mtd: spi-nor: Copy sandbox
Jagan Teki
- [U-Boot] [PATCH v6 51/76] mtd: spi-nor: sandbox: Use spi-nor header
Jagan Teki
- [U-Boot] [PATCH v6 52/76] mtd: spi-nor: Add SPI_NOR_SANBOX
Jagan Teki
- [U-Boot] [PATCH v6 53/76] sandbox: kconfig: Drop DM_SPI_FLASH
Jagan Teki
- [U-Boot] [PATCH v6 54/76] sandbox: kconfig: Select MTD uclass
Jagan Teki
- [U-Boot] [PATCH v6 55/76] defconfigs: sandbox: Enable SPI-NOR
Jagan Teki
- [U-Boot] [PATCH v6 56/76] mtd: sandbox: Use CONFIG_MTD_SPI_NOR
Jagan Teki
- [U-Boot] [PATCH v6 57/76] defconfigs: sandbox: Enable SPI_NOR_SANDBOX
Jagan Teki
- [U-Boot] [PATCH v6 58/76] spi_flash: Use spi_flash_t
Jagan Teki
- [U-Boot] [PATCH v6 59/76] mtd: spi-nor: Add CONFIG_SPI_NOR_MISC
Jagan Teki
- [U-Boot] [PATCH v6 60/76] config: Enable SPI-NOR framework
Jagan Teki
- [U-Boot] [PATCH v6 61/76] spi-nor: Use CONFIG_MTD_SPI_NOR
Jagan Teki
- [U-Boot] [PATCH v6 62/76] configs: Use CONFIG_MTD_SPI_NOR
Jagan Teki
- [U-Boot] [PATCH v6 63/76] configs: Use CONFIG_SPI_NOR_BAR
Jagan Teki
- [U-Boot] [PATCH v6 64/76] configs: spi-nor: Add new flash vendor configs
Jagan Teki
- [U-Boot] [PATCH v6 65/76] configs: Use CONFIG_SPI_NOR_MISC
Jagan Teki
- [U-Boot] [PATCH v6 66/76] spi: Drop mode_rx
Jagan Teki
- [U-Boot] [PATCH v6 67/76] spi: Drop SPI_RX_FAST
Jagan Teki
- [U-Boot] [PATCH v6 68/76] configs: Enable MTD uclass in missing configs
Jagan Teki
- [U-Boot] [PATCH v6 69/76] configs: Drop CONFIG_SPI_FLASH_MTD
Jagan Teki
- [U-Boot] [PATCH v6 70/76] uclass: Replace UCLASS_SPI_FLASH with UCLASS_MTD
Jagan Teki
- [U-Boot] [PATCH v6 71/76] uclass: Drop UCLASS_SPI_FLASH
Jagan Teki
- [U-Boot] [PATCH v6 72/76] configs: Use CONFIG_SPL_SPI_NOR_SUPPORT
Jagan Teki
- [U-Boot] [PATCH v6 73/76] configs: Enable CONFIG_SPL_MTD_SUPPORT
Jagan Teki
- [U-Boot] [PATCH v6 74/76] sf: Drop entire spi-flash framework
Jagan Teki
- [U-Boot] [PATCH v6 75/76] MAINTAINERS: Add myself as SPI NOR maintainer
Jagan Teki
- [U-Boot] [PATCH v6 76/76] configs: CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
Jagan Teki
- [U-Boot] [PATCH v6 09/76] mtd: spi-nor: Add dm spi-nor probing
Jagan Teki
- [U-Boot] Adding support for SPI-attached MR25H256 MRAM with Device Tree
Jagan Teki
- [U-Boot] [PATCH v6 66/76] spi: Drop mode_rx
Jagan Teki
- [U-Boot] [PATCH v4 0/6] add dma uclass implementation and adopt ti-edma3 to it
Jagan Teki
- [U-Boot] [PATCH] ARM: zynq: Wire-up saving environment to QSPI
Jagan Teki
- [U-Boot] [PATCH v4 0/6] add dma uclass implementation and adopt ti-edma3 to it
Jagan Teki
- [U-Boot] [PATCH 13/16] sandbox: spi: Add more debugging to SPI emulation
Jagan Teki
- [U-Boot] [PATCH 14/16] sandbox: spi: Remove an incorrect free()
Jagan Teki
- [U-Boot] [PATCH 15/16] spi: Correct two error return values
Jagan Teki
- [U-Boot] [PATCH 16/16] spi: Re-enable the SPI flash tests
Jagan Teki
- [U-Boot] [PATCH v2] spi: omap3: Convert to driver model
Jagan Teki
- [U-Boot] [PATCH v7 09/76] mtd: spi-nor: Add dm spi-nor probing
Jagan Teki
- [U-Boot] [PATCH v7 12/76] mtd: spi-nor: m25p80: Add spi_nor support for non-dm
Jagan Teki
- [U-Boot] [PATCH v7 16/76] spi_flash: Use mtd_info operation for SPI-NOR
Jagan Teki
- [U-Boot] [PATCH v7 74/76] sf: Drop entire spi-flash framework
Jagan Teki
- [U-Boot] [PATCH v7 73/76] configs: Enable CONFIG_SPL_MTD_SUPPORT
Jagan Teki
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Jagan Teki
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Jagan Teki
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Jagan Teki
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Jagan Teki
- [U-Boot] [PATCH v7 77/77] x86: Drop using spi_flash_dm_ops
Jagan Teki
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Jagan Teki
- [U-Boot] [PATCH v6 65/76] configs: Use CONFIG_SPI_NOR_MISC
Jagan Teki
- [U-Boot] [PATCH v7 77/77] x86: Drop using spi_flash_dm_ops
Jagan Teki
- [U-Boot] [PATCH v6 65/76] configs: Use CONFIG_SPI_NOR_MISC
Jagan Teki
- [U-Boot] [PATCH v7 70/76] x86: Drop using spi_flash_dm_ops
Jagan Teki
- [U-Boot] [PATCH v3] spi: omap3: Convert to driver model
Jagan Teki
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Jagan Teki
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Jagan Teki
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Jagan Teki
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Jagan Teki
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Jagan Teki
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Jagan Teki
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Jagan Teki
- [U-Boot] [PATCH v4 0/5] dm: omap3_spi: Convert to driver model
Jagan Teki
- [U-Boot] [PATCH v4 1/5] spi: omap3: Remove unused variable irqstatus in omap3_spi_txrx
Jagan Teki
- [U-Boot] [PATCH v4 2/5] spi: spi-uclass: Set slave wordlen with SPI_DEFAULT_WORDLEN
Jagan Teki
- [U-Boot] [PATCH v4 3/5] spi: omap3: Move headers code inside the driver
Jagan Teki
- [U-Boot] [PATCH v4 4/5] spi: omap3: Make local functions as static
Jagan Teki
- [U-Boot] [PATCH v4 5/5] spi: omap3: Convert to driver model
Jagan Teki
- [U-Boot] [PATCH v4 0/5] dm: omap3_spi: Convert to driver model
Jagan Teki
- [U-Boot] [PATCH] ARM: zynq: Wire-up saving environment to QSPI
Jagan Teki
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Jagan Teki
- [U-Boot] Pull request: u-boot-spi/master
Jagan Teki
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Jagan Teki
- [U-Boot] Problem with attaching UBI partition
Jagan Teki
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Jagan Teki
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Jagan Teki
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Jagan Teki
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
Jagan Teki
- [U-Boot] [PATCH v4 0/5] dm: omap3_spi: Convert to driver model
Jagan Teki
- [U-Boot] Problem with attaching UBI partition
Jagan Teki
- [U-Boot] Issue with USB mass storage (thumb drives)
Sergei Temerkhanov
- [U-Boot] [PATCH] serial: pl01x: Add support for devices with the rate pre-configured.
Sergei Temerkhanov
- [U-Boot] [PATCH] sunxi: H3: Add support for the host usb-phys
Chen-Yu Tsai
- [U-Boot] [PATCH v7 1/7] mips: add base support for QCA/Atheros ath79 SOCs
Marek Vasut
- [U-Boot] [PATCH 1/5] mips: cache: Bulletproof the code against cornercases
Marek Vasut
- [U-Boot] [PATCH 1/5] mips: cache: Bulletproof the code against cornercases
Marek Vasut
- [U-Boot] FPGA detection failure on Cyclone V soc development kit
Marek Vasut
- [U-Boot] [PATCH 11/13] usb: remove UniPhier EHCI driver
Marek Vasut
- [U-Boot] [PATCH v7 5/7] mips: ath79: add spi driver
Marek Vasut
- [U-Boot] Issue with USB mass storage (thumb drives)
Marek Vasut
- [U-Boot] Issue with USB mass storage (thumb drives)
Marek Vasut
- [U-Boot] Issue with USB mass storage (thumb drives)
Marek Vasut
- [U-Boot] Issue with USB mass storage (thumb drives)
Marek Vasut
- [U-Boot] Issue with USB mass storage (thumb drives)
Marek Vasut
- [U-Boot] Issue with USB mass storage (thumb drives)
Marek Vasut
- [U-Boot] [PATCH] usb: gadget: f_thor: free the allocated out request buffer
Marek Vasut
- [U-Boot] [PATCH] usb: dwc2: Enhance interrupt handling for CONTROL transaction
Marek Vasut
- [U-Boot] [PULL] u-boot-socfpga/master
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PATCHv2 1/3] arm: socfpga: add reset manager defines for Arria10
Marek Vasut
- [U-Boot] [PATCHv2 1/3] arm: socfpga: add reset manager defines for Arria10
Marek Vasut
- [U-Boot] Issue with USB mass storage (thumb drives)
Marek Vasut
- [U-Boot] [PATCH v2 05/18] usb: ulpi: Add Kconfig options for ULPI
Marek Vasut
- [U-Boot] [PATCH v2 06/18] Migrate CONFIG_ULPI* to Kconfig
Marek Vasut
- [U-Boot] [PATCH 2/2] include:configs: Add usb device-tree fixup for all fsl platforms
Marek Vasut
- [U-Boot] Problem with mounting a jffs2 partition on flash.
Marek Vasut
- [U-Boot] [PATCH v1 1/2] drivers: musb-new: Add USB DRC driver for Microchip PIC32 OTG controller.
Marek Vasut
- [U-Boot] [PATCH v1 1/2] drivers: musb-new: Add USB DRC driver for Microchip PIC32 OTG controller.
Marek Vasut
- [U-Boot] Problem with mounting a jffs2 partition on flash.
Marek Vasut
- [U-Boot] [PATCH v2 1/3] mmc: uniphier: add driver for UniPhier SD/MMC host controller
Marek Vasut
- [U-Boot] Problem with mounting a jffs2 partition on flash.
Marek Vasut
- [U-Boot] [PATCH] arm: at91: Add support for DENX MA5D4 SoM and EVK
Marek Vasut
- [U-Boot] Problem with mounting a jffs2 partition on flash.
Marek Vasut
- [U-Boot] Problem with mounting a jffs2 partition on flash.
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: Add missing CONFIG_BUILD_TARGET
Marek Vasut
- [U-Boot] [PATCH] arm: at91: Add support for DENX MA5D4 SoM and EVK
Marek Vasut
- [U-Boot] [PATCH] arm: at91: Add support for DENX MA5D4 SoM and EVK
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: Add missing CONFIG_BUILD_TARGET
Marek Vasut
- [U-Boot] Problem with mounting a jffs2 partition on flash.
Marek Vasut
- [U-Boot] [PATCH 1/2] arm: socfpga: av_socdk: Add support for QSPI boot
Marek Vasut
- [U-Boot] [PATCH 2/2] arm: socfpga: cv_socdk: Add support for QSPI boot
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: Remove bashisms from qts filter
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: Fix ethernet reset handling
Marek Vasut
- [U-Boot] Problem with mounting a jffs2 partition on flash.
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: Enable ethernet PHY configuration to RGMII again
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: Enable ethernet PHY configuration to RGMII again
Marek Vasut
- [U-Boot] Problem with mounting a jffs2 partition on flash.
Marek Vasut
- [U-Boot] [GIT] Pull request: u-boot-dfu
Marek Vasut
- [U-Boot] Problem with mounting a jffs2 partition on flash.
Marek Vasut
- [U-Boot] Problem with mounting a jffs2 partition on flash.
Marek Vasut
- [U-Boot] [GIT] Pull request: u-boot-dfu
Marek Vasut
- [U-Boot] [PATCH] usb: eth: fix memalign() parameter order
Marek Vasut
- [U-Boot] [PATCH] usb: eth: fix memalign() parameter order
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: Remove bashisms from qts filter
Marek Vasut
- [U-Boot] [PATCH] arm: at91: Add support for DENX MA5D4 SoM and EVK
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: Remove bashisms from qts filter
Marek Vasut
- [U-Boot] [GIT] Pull request: u-boot-dfu
Marek Vasut
- [U-Boot] [PATCH] implement Fastboot via USB OTG on bcm28155_ap boards
Marek Vasut
- [U-Boot] [PATCH] fastboot: update error and warning messages
Marek Vasut
- [U-Boot] [PATCH v2 1/3] mmc: uniphier: add driver for UniPhier SD/MMC host controller
Marek Vasut
- [U-Boot] [PATCH 2/4] mxsboot: remove unused include
Marek Vasut
- [U-Boot] Issue with USB mass storage (thumb drives)
Marek Vasut
- [U-Boot] [PATCH] usb: dwc2: Enhance interrupt handling for CONTROL transaction
Marek Vasut
- [U-Boot] [PATCH 07/10] mtd: nand: s3c: Add missing correction and select_chip functions
Marek Vasut
- [U-Boot] [PATCH 01/10] video: Add S3C24xx framebuffer support
Marek Vasut
- [U-Boot] Issue with USB mass storage (thumb drives)
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: Enabling U-Boot environment support in QSPI
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PULL] u-boot-socfpga/master
Marek Vasut
- [U-Boot] [PATCH] usb: eth: fix memalign() parameter order
Marek Vasut
- [U-Boot] [PATCH] serial: Move carriage return before line feed for some serial drivers
Marek Vasut
- [U-Boot] Issue with USB mass storage (thumb drives)
Marek Vasut
- [U-Boot] [PATCH v2 1/2] board:freescale:common: Move device-tree fixup framework to common file
Marek Vasut
- [U-Boot] [PATCH v2 2/2] board:freescale:usb: Add device-tree fixup support for xhci controller
Marek Vasut
- [U-Boot] [PATCH] serial: Move carriage return before line feed for some serial drivers
Marek Vasut
- [U-Boot] [PATCH v2 1/2] board:freescale:common: Move device-tree fixup framework to common file
Marek Vasut
- [U-Boot] [PATCH 3/5] usb: ehci: Implement V2P mapping
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: Enabling U-Boot environment support in QSPI
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: Fix SR1500 env position
Marek Vasut
- [U-Boot] [PATCH 3/5] usb: ehci: Implement V2P mapping
Marek Vasut
- [U-Boot] [PATCH 3/5] usb: ehci: Implement V2P mapping
Marek Vasut
- [U-Boot] [PATCH] usb: gadget: composite: Correct recovery path for register
Marek Vasut
- [U-Boot] [PATCH] usb: ehci: Fix warning on aarch64
Marek Vasut
- [U-Boot] [PATCH] usb: ehci: Fix warning on aarch64
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: Fix SR1500 env position
Marek Vasut
- [U-Boot] [PATCH] usb: gadget: composite: Correct recovery path for register
Marek Vasut
- [U-Boot] [PATCH 03/17] drivers: usb: musb: add ti musb misc driver for wrapper
Marek Vasut
- [U-Boot] [PATCH 05/17] drivers: usb: musb: adopt musb backend driver to driver model
Marek Vasut
- [U-Boot] [PATCH 05/17] drivers: usb: musb: adopt musb backend driver to driver model
Marek Vasut
- [U-Boot] [PATCH 03/17] drivers: usb: musb: add ti musb misc driver for wrapper
Marek Vasut
- [U-Boot] Problem with attaching UBI partition
Marek Vasut
- [U-Boot] Problem with attaching UBI partition
Marek Vasut
- [U-Boot] [PATCH] ARM: keystone2: Get rid of unused clock files
Lokesh Vutla
- [U-Boot] [PATCH V5 7/7] board: ti: AM57xx: Add detection logic for AM57xx-evm
Lokesh Vutla
- [U-Boot] [PATCH] ARM: DRA7xx: Enable NFS boot command
Lokesh Vutla
- [U-Boot] [PATCH 1/1] am33xx: Update serial platdata to update reg_offset to 0
Lokesh Vutla
- [U-Boot] [PATCH v2] sunxi: power: add support for sy8106a driver
Jelle van der Waa
- [U-Boot] [PATCH] arm: ls1021a: Add QSPI or IFC support in SD boot for LS1021AQDS board
Alison Wang
- [U-Boot] [PATCH] armv7: ls102xa: Move smmu and stream id initialization into the common soc code
Alison Wang
- [U-Boot] [PATCH] net: phy: atheros: Fix problem with phy_reset() clearing BMCR
Alison Wang
- [U-Boot] [PATCH] dm: serial: Move a carriage return before a line feed
Alison Wang
- [U-Boot] [PATCH] serial: Move carriage return before line feed for some serial drivers
Alison Wang
- [U-Boot] [PATCH] ls102xa: fdt: Update FSL_QSPI_COMPAT and FSL_DSPI_COMPAT
Alison Wang
- [U-Boot] [PATCH v2] ARM: Disable "DISCARD" for secure section if CONFIG_ARMV7_SECURE_BASE isn't defined
Dongsheng Wang
- [U-Boot] [PATCH v3] Enable snooping on transactions from CAAM block
Huan Wang
- [U-Boot] [PATCH] net: fix m88e1111s PHY auto negotiation timeout
Huan Wang
- [U-Boot] [RFC PATCH v1 0/2] Convert ls1021aqds to use driver model for serial ports
Huan Wang
- [U-Boot] [RFC PATCH v1 1/2] arm: ls1021aqds: Convert to driver model and enable serial support
Huan Wang
- [U-Boot] [RFC PATCH v1 2/2] arm: ls1021aqds: Enable driver model lpuart serial driver
Huan Wang
- [U-Boot] ls1021aqds_nor_lpuart_ boards
Huan Wang
- [U-Boot] [PATCH] dm: serial: Move a carriage return before a line feed
Huan Wang
- [U-Boot] [PATCH v2 2/2] arm: ls1021aqds: Enable driver model lpuart serial driver
Huan Wang
- [U-Boot] [PATCH v2 1/2] arm: ls1021aqds: Convert to driver model and enable serial support
Huan Wang
- [U-Boot] [PATCH] dm: serial: Move a carriage return before a line feed
Huan Wang
- [U-Boot] [PATCH] serial: Move carriage return before line feed for some serial drivers
Huan Wang
- [U-Boot] [PATCH] serial: Move carriage return before line feed for some serial drivers
Huan Wang
- [U-Boot] [PATCH v7 5/7] mips: ath79: add spi driver
Wills Wang
- [U-Boot] [PATCH v3 4/7] tegra: Always build a boot image with the same filename
Stephen Warren
- [U-Boot] [PATCH v3 6/7] Makefile: Make u-boot.img the same as u-boot-dtb.img
Stephen Warren
- [U-Boot] [PATCH v3 0/7] fdt: Replace u-boot-dtb.bin with u-boot.bin
Stephen Warren
- [U-Boot] [PATCH v2 00/23] dm: tegra: Convert tegra20 and tegra124 video drivers to driver model
Stephen Warren
- [U-Boot] [PATCH v2 00/23] dm: tegra: Convert tegra20 and tegra124 video drivers to driver model
Stephen Warren
- [U-Boot] [PATCH v2 00/23] dm: tegra: Convert tegra20 and tegra124 video drivers to driver model
Stephen Warren
- [U-Boot] [PATCH] test/py: make each unit test a pytest
Stephen Warren
- [U-Boot] [PATCH V2 1/2] Makefile: generate symbol list from u-boot
Stephen Warren
- [U-Boot] [PATCH V2 2/2] test/py: run all "ut" subtests
Stephen Warren
- [U-Boot] [PATCH 3/5] kbuild: use $(call cmd, ) rather than $(call if_changed, ) where possible
Stephen Warren
- [U-Boot] .travis.yml: rework according to new travis-ci infra
Stephen Warren
- [U-Boot] [PATCH] .travis.yml: explicitly request sudo
Stephen Warren
- [U-Boot] [PATCH] test/py: exit(1) if there are problems running py.test
Stephen Warren
- [U-Boot] [PATCH] test/py: HTML awesome!
Stephen Warren
- [U-Boot] [PATCH] .travis.yml: explicitly request sudo
Stephen Warren
- [U-Boot] [PATCH] malloc: solve dead code issue in memalign()
Stephen Warren
- [U-Boot] [PATCH] test/py: support running sandbox under gdbserver
Stephen Warren
- [U-Boot] [PATCH] test/py: capture the entire U-Boot version at boot
Stephen Warren
- [U-Boot] [PATCH] test/py: capture the entire U-Boot version at boot
Stephen Warren
- [U-Boot] [PATCH V2 1/2] test/py: fix off-by-one error in spawn matching code
Stephen Warren
- [U-Boot] [PATCH V2 2/2] test/py: capture the entire U-Boot version at boot
Stephen Warren
- [U-Boot] rpi: set ethaddr as well
Stephen Warren
- [U-Boot] [PATCH] serial: pl01x: Add support for devices with the rate pre-configured.
Stephen Warren
- [U-Boot] [PATCH 1/2] ARM: rpi: update memory layout env. var. documentation
Stephen Warren
- [U-Boot] [PATCH 2/2] ARM: rpi: set fdt_high in the default environment
Stephen Warren
- [U-Boot] [PATCH 1/2] ARM: rpi: update memory layout env. var. documentation
Stephen Warren
- [U-Boot] [PATCH] video: bcm2835: use bus_to_phys() on FB address
Stephen Warren
- [U-Boot] [PATCH] test/py: support running sandbox under gdbserver
Stephen Warren
- [U-Boot] [PATCH] test/py: support running sandbox under gdbserver
Stephen Warren
- [U-Boot] test/py: support running sandbox under gdbserver
Stephen Warren
- [U-Boot] [PATCH 1/2] dm: video: Add a temporary work-around for old stdout var
Stephen Warren
- [U-Boot] [PATCH V3 1/2] Makefile: generate symbol list from u-boot
Stephen Warren
- [U-Boot] [PATCH V3 2/2] test/py: run all "ut" subtests
Stephen Warren
- [U-Boot] [PATCH] test/py: add docs for gdbserver and pytest options
Stephen Warren
- [U-Boot] [PATCH 1/2] test/py: don't import pexpect
Stephen Warren
- [U-Boot] [PATCH 2/2] Enable test/py for sandbox in Travis CI
Stephen Warren
- [U-Boot] [PATCH] Makefile: remove BUILD_TAG from KBUILD_CFLAGS
Stephen Warren
- [U-Boot] [PATCH] Fix variable documented in README.distro for PXE address.
Stephen Warren
- [U-Boot] [PATCH] Makefile: remove BUILD_TAG from KBUILD_CFLAGS
Stephen Warren
- [U-Boot] [PATCH] Makefile: remove BUILD_TAG from KBUILD_CFLAGSilver pepper blue dog
Stephen Warren
- [U-Boot] [PATCH] mmc: show error message when "mmc dev" command fails
Stephen Warren
- [U-Boot] [PATCH] Makefile: remove BUILD_TAG from KBUILD_CFLAGS
Stephen Warren
- [U-Boot] [PATCH] test/py: fix CONFIG_SPL test
Stephen Warren
- [U-Boot] [PATCH V2] Makefile: remove BUILD_TAG from KBUILD_CFLAGS
Stephen Warren
- [U-Boot] [PATCH] test/py: print summary in test order
Stephen Warren
- [U-Boot] [PATCH V3] Makefile: remove BUILD_TAG from KBUILD_CFLAGS
Stephen Warren
- [U-Boot] [PATCH] test/py: handle exceptions in console creation
Stephen Warren
- [U-Boot] [PATCH] ARM: tegra: enable USB device mode port on Dalmore
Stephen Warren
- [U-Boot] [PATCH] test/py: put "Starting U-Boot" into separate log section
Stephen Warren
- [U-Boot] [PATCH v2 16/26] dm: tegra: net: Convert tegra boards to driver model for Ethernet
Stephen Warren
- [U-Boot] [PULL] u-boot-usb/master
Stephen Warren
- [U-Boot] [PATCH v2 16/26] dm: tegra: net: Convert tegra boards to driver model for Ethernet
Stephen Warren
- [U-Boot] [PATCH] usb: eth: fix memalign() parameter order
Stephen Warren
- [U-Boot] [PATCH] x86: fix memalign() parameter order
Stephen Warren
- [U-Boot] [PATCH] ARM: rpi: set initrd_high
Stephen Warren
- [U-Boot] [PATCH] test/py: handle exceptions in console creation
Stephen Warren
- [U-Boot] [PATCH] ARM: tegra: enable USB device mode port on Dalmore
Stephen Warren
- [U-Boot] [PATCH V2 1/2] ARM: tegra: don't set CONFIG_USB_MAX_CONTROLLER_COUNT
Stephen Warren
- [U-Boot] [PATCH V2 2/2] ARM: tegra: enable USB device mode port on Dalmore
Stephen Warren
- [U-Boot] [PATCH] ARM: rpi: increase CONFIG_SYS_MAXARGS
Stephen Warren
- [U-Boot] [PATCH RESEND] test/py: use space to interrupt autoboot
Stephen Warren
- [U-Boot] [PATCH RESEND] test/py: skip tests that require large CONFIG_SYS_MAXARGS
Stephen Warren
- [U-Boot] Warnings from Tegra LCD conversion?
Stephen Warren
- [U-Boot] [PATCH] test/py: only check for SPL signature if SPL uses serial output
Stephen Warren
- [U-Boot] test/py main_signon
Stephen Warren
- [U-Boot] how does board_init_f() -> board_init_r?
Stephen Warren
- [U-Boot] test/py main_signon
Stephen Warren
- [U-Boot] [PATCH 00/16] image: Fix various test failures
Stephen Warren
- [U-Boot] [PATCH 10/30] dm: blk: Rename get_device() to blk_get_device_str()
Stephen Warren
- [U-Boot] [PATCH 18/30] dm: block: Rename device number member dev to devnum
Stephen Warren
- [U-Boot] [PATCH 24/30] dm: sandbox: Add driver-model block-device support for sandbox
Stephen Warren
- [U-Boot] [PATCH 00/30] dm: Add driver-model support for block drivers
Stephen Warren
- [U-Boot] [PATCH 02/30] dm: pci: Break out the common region display code
Stephen Warren
- [U-Boot] [PATCH 14/30] dm: part: Convert partition API use to linker lists
Stephen Warren
- [U-Boot] [PATCH] video: tegra: Correct a Kconfig warning with VIDCONSOLE_AS_LCD
Stephen Warren
- [U-Boot] [PATCH v2] test/py: only check for SPL signature if SPL uses serial output
Stephen Warren
- [U-Boot] [PATCH v3] test/py: only check for SPL signature if SPL uses serial output
Stephen Warren
- [U-Boot] test/py main_signon
Stephen Warren
- [U-Boot] [PATCH] usb: eth: fix memalign() parameter order
Stephen Warren
- [U-Boot] [PATCH] test/py: Add option to skip SPL signature checking
Stephen Warren
- [U-Boot] [PATCH 2/9] arm64: Make full va map code more dynamic
Stephen Warren
- [U-Boot] [PATCH 4/9] tegra: Replace home grown mmu code with generic table approach
Stephen Warren
- [U-Boot] [PATCH 0/9] arm64: Unify MMU code
Stephen Warren
- [U-Boot] [PATCH 2/9] arm64: Make full va map code more dynamic
Stephen Warren
- [U-Boot] [PATCH 2/9] arm64: Make full va map code more dynamic
Stephen Warren
- [U-Boot] [PATCH] rpi: always scroll by 10 lines
Stephen Warren
- [U-Boot] [PATCH] rpi: set board serial number in environment
Stephen Warren
- [U-Boot] [PATCH v2] test/py: Add option to skip SPL signature checking
Stephen Warren
- [U-Boot] [PATCH 2/9] arm64: Make full va map code more dynamic
Stephen Warren
- [U-Boot] [PATCH 4/9] tegra: Replace home grown mmu code with generic table approach
Stephen Warren
- [U-Boot] [PATCH 2/9] arm64: Make full va map code more dynamic
Stephen Warren
- [U-Boot] [PATCH 0/2] tegra124: Add support for Avionic Design platform
Stephen Warren
- [U-Boot] [PATCH 1/2] power: as3722: Allow using on any i2c bus with any address
Stephen Warren
- [U-Boot] [PATCH 2/2] Add support the Avionic Design Meerkat COM and Kein Baseboard
Stephen Warren
- [U-Boot] [PATCH 2/9] arm64: Make full va map code more dynamic
Stephen Warren
- [U-Boot] [PATCH 2/2] net: Move CONFIG_RTL8169 to Kconfig
Stephen Warren
- [U-Boot] [PATCH 2/9] arm64: Make full va map code more dynamic
Stephen Warren
- [U-Boot] [PATCH 0/9] arm64: Unify MMU code
Stephen Warren
- [U-Boot] [PATCH 2/9] arm64: Make full va map code more dynamic
Stephen Warren
- [U-Boot] [PATCH 05/10] tegra: Replace home grown mmu code with generic table approach
Stephen Warren
- [U-Boot] [PATCH 02/10] arm64: Make full va map code more dynamic
Stephen Warren
- [U-Boot] [PATCH v3] test/py: Add option to skip SPL signature checking
Stephen Warren
- [U-Boot] [PATCH 3/5] usb: ehci: Implement V2P mapping
Stephen Warren
- [U-Boot] [PATCH 3/5] usb: ehci: Implement V2P mapping
Stephen Warren
- [U-Boot] [PATCH v4 00/11] arm64: Unify MMU code v3
Stephen Warren
- [U-Boot] [PATCH 3/5] usb: ehci: Implement V2P mapping
Stephen Warren
- [U-Boot] [PATCH 02/10] arm64: Make full va map code more dynamic
Stephen Warren
- [U-Boot] [PATCH 2/2] Add support the Avionic Design Meerkat COM and Kein Baseboard
Stephen Warren
- [U-Boot] [PATCH 02/10] arm64: Make full va map code more dynamic
Stephen Warren
- [U-Boot] [PATCH v2 00/23] dm: tegra: Convert tegra20 and tegra124 video drivers to driver model
Tom Warren
- [U-Boot] [PATCH v2 00/23] dm: tegra: Convert tegra20 and tegra124 video drivers to driver model
Tom Warren
- [U-Boot] [PATCH v2 00/23] dm: tegra: Convert tegra20 and tegra124 video drivers to driver model
Tom Warren
- [U-Boot] Pull request, u-boot-tegra/master
Tom Warren
- [U-Boot] [PATCH] mtd, ubi: set free_count to zero before walking through erase list
Richard Weinberger
- [U-Boot] 9c11135 breaks bootz
Matthias Weißer
- [U-Boot] [PATCH] image: fix getenv_bootm_size() function again
Matthias Weißer
- [U-Boot] [PATCH] image: fix getenv_bootm_size() function
Matthias Weißer
- [U-Boot] [Patch V3 2/3] fm: fdt: Move fman ucode fixup to Fman driver code
Scott Wood
- [U-Boot] [Patch V3 2/3] fm: fdt: Move fman ucode fixup to Fman driver code
Scott Wood
- [U-Boot] [PATCH 2/3][v3] Data types defined for 64 bit physical address
Scott Wood
- [U-Boot] [PATCH 07/10] mtd: nand: s3c: Add missing correction and select_chip functions
Scott Wood
- [U-Boot] [U-Boot, v3, 2/2] arasan: nfc: Add initial nand driver support for arasan
Scott Wood
- [U-Boot] Pull request: nand flash
Scott Wood
- [U-Boot] [Patch V3 2/3] fm: fdt: Move fman ucode fixup to Fman driver code
Scott Wood
- [U-Boot] [PATCH 07/10] mtd: nand: s3c: Add missing correction and select_chip functions
Scott Wood
- [U-Boot] [PATCH] armv8/fsl-layerscape: add IFC fixup for LS1043A with QSPI enabled
Scott Wood
- [U-Boot] [RFC] armv8: layerscape: Add support of u-boot device tree fix-up
Scott Wood
- [U-Boot] [PATCH 2/3][v3] Data types defined for 64 bit physical address
Scott Wood
- [U-Boot] [RFC] armv8: layerscape: Add support of u-boot device tree fix-up
Scott Wood
- [U-Boot] [RFC] armv8: layerscape: Add support of u-boot device tree fix-up
Scott Wood
- [U-Boot] [PATCH] OMAP3: am3517_evm: SD/MMC boot with uEnv.txt, zImage, and FDT
Derald D. Woods
- [U-Boot] [PATCH] OMAP3: am3517_evm: SD/MMC boot with uEnv.txt, zImage, and FDT
Derald D. Woods
- [U-Boot] [PATCH] OMAP3: am3517_evm: SD/MMC boot with uEnv.txt, zImage, and FDT
Derald D. Woods
- [U-Boot] [PATCH] dm: ns16550: Add support for reg-offset property
Derald D. Woods
- [U-Boot] [PATCH] dm: ns16550: Add support for reg-offset property
Derald D. Woods
- [U-Boot] [PATCH] dm: ns16550: Add support for reg-offset property
Derald D. Woods
- [U-Boot] [PATCH] dm: ns16550: Add support for reg-offset property
Derald D. Woods
- [U-Boot] [PATCH] dm: ns16550: Add support for reg-offset property
Derald D. Woods
- [U-Boot] [PATCH] dm: ns16550: Add support for reg-offset property
Derald D. Woods
- [U-Boot] [PATCH] dm: ns16550: Add support for reg-offset property
Derald D. Woods
- [U-Boot] [PATCH V2] OMAP3: Various: Update serial platdata to update reg_offset to 0
Derald D. Woods
- [U-Boot] [PATCH] zynq-common: Fix usbboot env variable
Jason Wu
- [U-Boot] [PATCH] doc: uniphier: update U-Boot file names
Masahiro Yamada
- [U-Boot] [PATCH v2] ARM: uniphier: update U-Boot file names
Masahiro Yamada
- [U-Boot] [PATCH] spl: define BOOT_DEVICE_USB
Masahiro Yamada
- [U-Boot] [PATCH] spl: define BOOT_DEVICE_USB
Masahiro Yamada
- [U-Boot] [PATCH v2] spl: define BOOT_DEVICE_USB
Masahiro Yamada
- [U-Boot] [PATCH] spl: define BOOT_DEVICE_USB
Masahiro Yamada
- [U-Boot] [PATCH 00/13] ARM: uniphier: a collection of clean-ups and new clock driver
Masahiro Yamada
- [U-Boot] [PATCH 01/13] ARM: uniphier: change stack pointer address for SPL
Masahiro Yamada
- [U-Boot] [PATCH 02/13] ARM: uniphier: create early page table at run-time
Masahiro Yamada
- [U-Boot] [PATCH 03/13] ARM: uniphier: add missing static qualifier
Masahiro Yamada
- [U-Boot] [PATCH 04/13] ARM: uniphier: support USB boot mode for ProXstream2 / PH1-LD6b SoC
Masahiro Yamada
- [U-Boot] [PATCH 05/13] clk: uniphier: add Media I/O clock driver for UniPhier SoCs
Masahiro Yamada
- [U-Boot] [PATCH 06/13] ARM: dts: uniphier: add reference clock nodes
Masahiro Yamada
- [U-Boot] [PATCH 07/13] ARM: dts: uniphier: add device nodes for system control blocks
Masahiro Yamada
- [U-Boot] [PATCH 08/13] ARM: dts: uniphier: add device nodes for Peripheral control block
Masahiro Yamada
- [U-Boot] [PATCH 09/13] ARM: dts: uniphier: add device nodes for MIO control block
Masahiro Yamada
- [U-Boot] [PATCH 10/13] ARM: dts: uniphier: switch to use clock drivers
Masahiro Yamada
- [U-Boot] [PATCH 11/13] usb: remove UniPhier EHCI driver
Masahiro Yamada
- [U-Boot] [PATCH 12/13] ARM: uniphier: enable generic EHCI driver
Masahiro Yamada
- [U-Boot] [PATCH 13/13] ARM: uniphier: drop unneeded EHCI pin mux settings
Masahiro Yamada
- [U-Boot] [PATCH] ARM: uniphier: remove unused header mio-regs.h
Masahiro Yamada
- [U-Boot] [ANN] U-Boot v2016.03-rc1 released
Masahiro Yamada
- [U-Boot] [PATCH] ARM: uniphier: move cmd_ddrmphy.c to fix build error
Masahiro Yamada
- [U-Boot] [PATCH] dts: keep clock-names and clocks in SPL DTB if SPL_CLK is enabled
Masahiro Yamada
- [U-Boot] [PATCH 0/5] kbuild fixes
Masahiro Yamada
- [U-Boot] [PATCH 1/5] kbuild: remove unneeded ifdef conditionals around build rules
Masahiro Yamada
- [U-Boot] [PATCH 2/5] kbuild: sunxi: fix build rule of sunxi-spl.bin
Masahiro Yamada
- [U-Boot] [PATCH 3/5] kbuild: use $(call cmd, ) rather than $(call if_changed, ) where possible
Masahiro Yamada
- [U-Boot] [PATCH 4/5] kbuild: add missing FORCE where $(call if_changed, ) is used
Masahiro Yamada
- [U-Boot] [PATCH 5/5] kbuild: fix build rule of u-boot-spl.dtb
Masahiro Yamada
- [U-Boot] [PATCH 0/3] UniPhier SD/eMMC controller driver
Masahiro Yamada
- [U-Boot] [PATCH 1/3] mmc: uniphier: add driver for UniPhier SD/MMC host controller
Masahiro Yamada
- [U-Boot] [PATCH 2/3] ARM: uniphier: enable UniPhier SD/MMC host driver
Masahiro Yamada
- [U-Boot] [PATCH 3/3] ARM: dts: uniphier: add SD/MMC host controller nodes
Masahiro Yamada
- [U-Boot] [PATCH v2 1/2] ARM: uniphier: fix makefiles to build cmd_ddr(m)phy.c
Masahiro Yamada
- [U-Boot] [PATCH v2 2/2] ARM: uniphier: move cmd_ddrmphy.c to fix build error
Masahiro Yamada
- [U-Boot] [PATCH] ARM: uniphier: adjust DDR clock delay line for ProXstream2
Masahiro Yamada
- [U-Boot] [PATCH 3/5] kbuild: use $(call cmd, ) rather than $(call if_changed, ) where possible
Masahiro Yamada
- [U-Boot] [PATCH v2 0/4] Kbuild fixes
Masahiro Yamada
- [U-Boot] [PATCH v2 1/4] kbuild: remove unneeded ifdef conditionals around build rules
Masahiro Yamada
- [U-Boot] [PATCH v2 2/4] kbuild: sunxi: fix build rule of sunxi-spl.bin
Masahiro Yamada
- [U-Boot] [PATCH v2 3/4] kbuild: add missing FORCE where $(call if_changed, ) is used
Masahiro Yamada
- [U-Boot] [PATCH v2 4/4] kbuild: fix build rule of u-boot-spl.dtb
Masahiro Yamada
- [U-Boot] [PATCH] image: fix getenv_bootm_size() function again
Masahiro Yamada
- [U-Boot] 9c11135 breaks bootz
Masahiro Yamada
- [U-Boot] [PATCH v3 0/3] Kbuild fixes
Masahiro Yamada
- [U-Boot] [PATCH v3 1/3] kbuild: remove unneeded ifdef conditionals around build rules
Masahiro Yamada
- [U-Boot] [PATCH v3 2/3] kbuild: add missing FORCE where $(call if_changed, ) is used
Masahiro Yamada
- [U-Boot] [PATCH v3 3/3] kbuild: fix build rule of u-boot-spl.dtb
Masahiro Yamada
- [U-Boot] [PATCH] board_r: fix a typo in comment block
Masahiro Yamada
- [U-Boot] 9c11135 breaks bootz
Masahiro Yamada
- [U-Boot] [PATCH] ARM: uniphier: drop unnecessary "bootm_low" environment define
Masahiro Yamada
- [U-Boot] [PATCH] Makefile: remove BUILD_TAG from KBUILD_CFLAGS
Masahiro Yamada
- [U-Boot] [PATCH v2] spl: define BOOT_DEVICE_USB
Masahiro Yamada
- [U-Boot] [PATCH 1/2] ARM: dts: uniphier: add EEPROM node for ProXstream2 Gentil board
Masahiro Yamada
- [U-Boot] [PATCH 2/2] ARM: dts: uniphier: enable I2C channel 2 of ProXstream2 Gentil board
Masahiro Yamada
- [U-Boot] [PATCH] mmc: show error message when "mmc dev" command fails
Masahiro Yamada
- [U-Boot] [PATCH v2 0/3] UniPhier SD/eMMC controller driver
Masahiro Yamada
- [U-Boot] [PATCH v2 1/3] mmc: uniphier: add driver for UniPhier SD/MMC host controller
Masahiro Yamada
- [U-Boot] [PATCH v2 2/3] ARM: uniphier: enable UniPhier SD/MMC host driver
Masahiro Yamada
- [U-Boot] [PATCH v2 3/3] ARM: dts: uniphier: add SD/MMC host controller nodes
Masahiro Yamada
- [U-Boot] [PATCH V3] Makefile: remove BUILD_TAG from KBUILD_CFLAGS
Masahiro Yamada
- [U-Boot] [PATCH v2 0/3] UniPhier: add new boards and update existing DTS
Masahiro Yamada
- [U-Boot] [PATCH v2 1/3] ARM: dts: uniphier: add EEPROM node for ProXstream2 Gentil board
Masahiro Yamada
- [U-Boot] [PATCH v2 2/3] ARM: dts: uniphier: enable I2C channel 2 of ProXstream2 Gentil board
Masahiro Yamada
- [U-Boot] [PATCH v2 3/3] ARM: uniphier: add support for PH1-Pro4 Ace and Sanji boards
Masahiro Yamada
- [U-Boot] [PATCH v3 0/3] UniPhier: add GPIO support
Masahiro Yamada
- [U-Boot] [PATCH v3 1/3] gpio: uniphier: add driver for UniPhier GPIO controller
Masahiro Yamada
- [U-Boot] [PATCH v3 2/3] gpio: do not include <asm/arch/gpio.h> for UniPhier
Masahiro Yamada
- [U-Boot] [PATCH v3 3/3] ARM: uniphier: enable GPIO command and driver for UniPhier SoCs
Masahiro Yamada
- [U-Boot] [PATCH] mmc: show error message when "mmc dev" command fails
Masahiro Yamada
- [U-Boot] [PATCH 00/13] ARM: uniphier: a collection of clean-ups and new clock driver
Masahiro Yamada
- [U-Boot] [PATCH] ARM: uniphier: remove unused header mio-regs.h
Masahiro Yamada
- [U-Boot] [PATCH 0/4] ARM: uniphier: several fixes of include/configs/uniphiers.h
Masahiro Yamada
- [U-Boot] [PATCH] ARM: uniphier: support some more DRAM use cases on PH1-Pro4
Masahiro Yamada
- [U-Boot] [PATCH v2] ARM: uniphier: update U-Boot file names
Masahiro Yamada
- [U-Boot] [PATCH v2] spl: define BOOT_DEVICE_USB
Masahiro Yamada
- [U-Boot] [PATCH v2 1/2] ARM: uniphier: fix makefiles to build cmd_ddr(m)phy.c
Masahiro Yamada
- [U-Boot] [PATCH v2 2/2] ARM: uniphier: move cmd_ddrmphy.c to fix build error
Masahiro Yamada
- [U-Boot] [PATCH] ARM: uniphier: adjust DDR clock delay line for ProXstream2
Masahiro Yamada
- [U-Boot] [PATCH] ARM: uniphier: drop unnecessary "bootm_low" environment define
Masahiro Yamada
- [U-Boot] [PATCH v2 0/3] UniPhier: add new boards and update existing DTS
Masahiro Yamada
- [U-Boot] pull request: u-boot-uniphier/master
Masahiro Yamada
- [U-Boot] [PATCH] Revert "gpio: Allow 's' as an abbreviation for 'status'"
Masahiro Yamada
- [U-Boot] [PATCH] Revert "gpio: Allow 's' as an abbreviation for 'status'"
Masahiro Yamada
- [U-Boot] [PATCH] ARM: dts: uniphier: rework System Bus nodes
Masahiro Yamada
- [U-Boot] [PATCH v4 0/4] UniPhier: add GPIO support
Masahiro Yamada
- [U-Boot] [PATCH v4 1/4] gpio: uniphier: add driver for UniPhier GPIO controller
Masahiro Yamada
- [U-Boot] [PATCH v4 2/4] gpio: do not include <asm/arch/gpio.h> for UniPhier
Masahiro Yamada
- [U-Boot] [PATCH v4 3/4] ARM: uniphier: enable GPIO command and driver for UniPhier SoCs
Masahiro Yamada
- [U-Boot] [PATCH v4 4/4] ARM: dts: uniphier: add GPIO controller nodes
Masahiro Yamada
- [U-Boot] [PATCH v3 0/3] UniPhier SD/eMMC controller driver
Masahiro Yamada
- [U-Boot] [PATCH v3 1/3] mmc: uniphier: add driver for UniPhier SD/MMC host controller
Masahiro Yamada
- [U-Boot] [PATCH v3 2/3] ARM: uniphier: enable UniPhier SD/MMC host driver
Masahiro Yamada
- [U-Boot] [PATCH v3 3/3] ARM: dts: uniphier: add SD/MMC host controller nodes
Masahiro Yamada
- [U-Boot] [PATCH 0/4] ARM: uniphier: eMMC boot support
Masahiro Yamada
- [U-Boot] [PATCH 1/4] ARM: uniphier: add eMMC boot support
Masahiro Yamada
- [U-Boot] [PATCH 2/4] ARM: uniphier: add a command to find the first MMC (non-SD) device
Masahiro Yamada
- [U-Boot] [PATCH 3/4] ARM: uniphier: add emmcupdate command
Masahiro Yamada
- [U-Boot] [PATCH 4/4] ARM: uniphier: default to environment in eMMC
Masahiro Yamada
- [U-Boot] [PATCH v2 1/3] mmc: uniphier: add driver for UniPhier SD/MMC host controller
Masahiro Yamada
- [U-Boot] [PATCH] fixup! gpio: uniphier: add driver for UniPhier GPIO controller
Masahiro Yamada
- [U-Boot] [PATCH 00/26] spl: Support loading a FIT image containing U-Boot
Masahiro Yamada
- [U-Boot] [PATCH 00/26] spl: Support loading a FIT image containing U-Boot
Masahiro Yamada
- [U-Boot] [PATCH] dts: keep clock-names and clocks in SPL DTB if SPL_CLK is enabled
Masahiro Yamada
- [U-Boot] fdtgrep results in Segmentation fault for 64bit DT
Masahiro Yamada
- [U-Boot] [PATCH v4 0/3] UniPhier SD/eMMC controller driver
Masahiro Yamada
- [U-Boot] [PATCH v4 1/3] mmc: uniphier: add driver for UniPhier SD/MMC host controller
Masahiro Yamada
- [U-Boot] [PATCH v4 2/3] ARM: uniphier: enable UniPhier SD/MMC host driver
Masahiro Yamada
- [U-Boot] [PATCH v4 3/3] ARM: dts: uniphier: add SD/MMC host controller nodes
Masahiro Yamada
- [U-Boot] [PATCH] ARM: uniphier: remove unused umc_polling()
Masahiro Yamada
- [U-Boot] [U-Boot, v3, 3/3] kbuild: fix build rule of u-boot-spl.dtb
Masahiro Yamada
- [U-Boot] [U-Boot, v3, 3/3] kbuild: fix build rule of u-boot-spl.dtb
Masahiro Yamada
- [U-Boot] [PATCH 00/21] ARM: uniphier: clean-ups of DRAM init code
Masahiro Yamada
- [U-Boot] [PATCH 01/21] ARM: uniphier: remove unused umc_polling()
Masahiro Yamada
- [U-Boot] [PATCH 02/21] ARM: uniphier: rework struct uniphier_board_data
Masahiro Yamada
- [U-Boot] [PATCH 03/21] ARM: uniphier: optimize ProXstream2 UMC init code with "for" loop
Masahiro Yamada
- [U-Boot] [PATCH 04/21] ARM: uniphier: use pr_err() where possible
Masahiro Yamada
- [U-Boot] [PATCH 05/21] ARM: uniphier: refactor UMC init code for ProXstream2
Masahiro Yamada
- [U-Boot] [PATCH 06/21] ARM: uniphier: remove UMC_INITCTL* and UMC_DRMR* settings
Masahiro Yamada
- [U-Boot] [PATCH 07/21] ARM: uniphier: disable debug circuit clocks for PH1-Pro4
Masahiro Yamada
- [U-Boot] [PATCH 08/21] ARM: uniphier: add a field to specify DDR3+
Masahiro Yamada
- [U-Boot] [PATCH 09/21] ARM: uniphier: merge DDR PHY init code for 3 SoCs
Masahiro Yamada
- [U-Boot] [PATCH 10/21] ARM: uniphier: remove unused argument of ph1_ld4_ddrphy_init()
Masahiro Yamada
- [U-Boot] [PATCH 11/21] ARM: uniphier: refactor DDR-PHY init code
Masahiro Yamada
- [U-Boot] [PATCH 12/21] ARM: uniphier: refactor UMC init code for PH1-sLD8
Masahiro Yamada
- [U-Boot] [PATCH 13/21] ARM: uniphier: support more DRAM use cases for PH1-sLD8
Masahiro Yamada
- [U-Boot] [PATCH 14/21] ARM: uniphier: refactor UMC init code for PH1-LD4
Masahiro Yamada
- [U-Boot] [PATCH 15/21] ARM: uniphier: optimize PH1-sLD8 UMC init code with "for" loop
Masahiro Yamada
- [U-Boot] [PATCH 16/21] ARM: uniphier: optimize PH1-LD4 UMC init code with "for" loop
Masahiro Yamada
- [U-Boot] [PATCH 17/21] ARM: uniphier: optimize PH1-Pro4 UMC init code with "for" loop
Masahiro Yamada
- [U-Boot] [PATCH 18/21] ARM: uniphier: rework DRAM size handling in UMC init code
Masahiro Yamada
- [U-Boot] [PATCH 19/21] ARM: uniphier: remove unused macros for UMC base addresses
Masahiro Yamada
- [U-Boot] [PATCH 20/21] ARM: uniphier: deprecate umc_dram_init_{start, poll}
Masahiro Yamada
- [U-Boot] [PATCH 21/21] ARM: uniphier: rename variable for DRAM controller base address
Masahiro Yamada
- [U-Boot] [PATCH 0/5] ARM: uniphier: prepare for ARMv8 SoC support
Masahiro Yamada
- [U-Boot] [PATCH 1/5] ARM: uniphier: merge two defconfig files
Masahiro Yamada
- [U-Boot] [PATCH 2/5] ARM: uniphier: rework UniPhier SoC select in Kconfig
Masahiro Yamada
- [U-Boot] [PATCH 3/5] ARM: uniphier: rename PH1-LD10/PH1-sLD11 to PH1-LD20/PH1-LD11
Masahiro Yamada
- [U-Boot] [PATCH 4/5] ARM: uniphier: prepare directory structure for ARMv8 SoC support
Masahiro Yamada
- [U-Boot] [PATCH 5/5] ARM: uniphier: fix warnings reported by aarch64 compiler
Masahiro Yamada
- [U-Boot] [PATCH] ARM: dts: uniphier: rework System Bus nodes
Masahiro Yamada
- [U-Boot] [PATCH v4 0/4] UniPhier: add GPIO support
Masahiro Yamada
- [U-Boot] [PATCH v4 0/3] UniPhier SD/eMMC controller driver
Masahiro Yamada
- [U-Boot] [PATCH 0/4] ARM: uniphier: eMMC boot support
Masahiro Yamada
- [U-Boot] [PATCH 00/21] ARM: uniphier: clean-ups of DRAM init code
Masahiro Yamada
- [U-Boot] [PATCH 0/5] ARM: uniphier: prepare for ARMv8 SoC support
Masahiro Yamada
- [U-Boot] pull request: u-boot-uniphier/master
Masahiro Yamada
- [U-Boot] pull request: u-boot-uniphier/master
Masahiro Yamada
- [U-Boot] [PATCH] spl_mmc: allow to load raw image
Masahiro Yamada
- [U-Boot] [PATCH] spl_nor: fix warning when compiled for 64bit target
Masahiro Yamada
- [U-Boot] [PATCH] mtd: denali: fix warning when compiled for 64bit system
Masahiro Yamada
- [U-Boot] pull request: u-boot-uniphier/master (2nd round)
Masahiro Yamada
- [U-Boot] [PATCH v3 0/3] arm: at91/spl: add DDR3-SDRAM initialization support
Wenyou Yang
- [U-Boot] [PATCH v3 1/3] arm: at91/spl: mpddrc: add struct atmel_mpddrc_config
Wenyou Yang
- [U-Boot] [PATCH v3 2/3] arm: at91/spl: mpddrc: add mpddrc DDR3-SDRAM initialization
Wenyou Yang
- [U-Boot] [PATCH v3 3/3] arm: at91/spl: mpddrc: use IP version to check configuration
Wenyou Yang
- [U-Boot] [PATCH v2] board: atmel: sama5d2_xplained: add SPL support
Wenyou Yang
- [U-Boot] [RESEND PATCH v3 0/5] ARM: at91: improve peripheral and system clock handle functions
Wenyou Yang
- [U-Boot] [RESEND PATCH v3 1/5] ARM: at91: asm/at91_pmc.h: fix trival register offset
Wenyou Yang
- [U-Boot] [RESEND PATCH v3 2/5] ARM: at91: clock: add a new file to handle clock
Wenyou Yang
- [U-Boot] [RESEND PATCH v3 3/5] ARM: cpu: at91: clean up peripheral clock code
Wenyou Yang
- [U-Boot] [RESEND PATCH v3 4/5] board: atmel: clean up peripheral clock code
Wenyou Yang
- [U-Boot] [RESEND PATCH v3 5/5] drivers: at91: clean up peripheral clock code
Wenyou Yang
- [U-Boot] [PATCH v3 0/4] ARM: at91: add UTMI PLL handle functions
Wenyou Yang
- [U-Boot] [PATCH v3 1/4] ARM: at91: clock: add UTMI PLL enable/disable function
Wenyou Yang
- [U-Boot] [PATCH v3 2/4] ARM: at91: armv7: clean up UTMI PLL handle code
Wenyou Yang
- [U-Boot] [PATCH v3 3/4] drivers: usb: atmel: clean up the UTMI PLL code
Wenyou Yang
- [U-Boot] [PATCH v3 4/4] board: atmel: siemens: clean up UTMI PLL code
Wenyou Yang
- [U-Boot] [PATCH v3 0/3] ARM: at91: add PLLB handle functions
Wenyou Yang
- [U-Boot] [PATCH v3 1/3] ARM: at91: clock: add PLLB enable/disable functions
Wenyou Yang
- [U-Boot] [PATCH v3 2/3] drivers: usb: ohci-at91: clean up the PLLB code
Wenyou Yang
- [U-Boot] [PATCH v3 3/3] board: atmel: siemens: clean up PLLB code
Wenyou Yang
- [U-Boot] [PATCH v3 0/3] ARM: at91: add PMC_PLLICPR init function
Wenyou Yang
- [U-Boot] [PATCH v3 1/3] ARM: at91: clock: add PMC_PLLICPR init function
Wenyou Yang
- [U-Boot] [PATCH v3 2/3] ARM: at91: clean up the PMC_PLLICPR init code
Wenyou Yang
- [U-Boot] [PATCH v3 3/3] board: atmel: clean up the PMC_PLLICPR init code
Wenyou Yang
- [U-Boot] [PATCH v3 1/3] ARM: at91: clock: add PLLB enable/disable functions
Yang, Wenyou
- [U-Boot] [RESEND PATCH v3 2/5] ARM: at91: clock: add a new file to handle clock
Yang, Wenyou
- [U-Boot] [PATCH v4 0/5] ARM: at91: improve peripheral and system clock handle functions
Wenyou Yang
- [U-Boot] [PATCH v4 1/5] ARM: at91: asm/at91_pmc.h: fix trival register offset
Wenyou Yang
- [U-Boot] [PATCH v4 2/5] ARM: at91: clock: add a new file to handle clock
Wenyou Yang
- [U-Boot] [PATCH v4 3/5] ARM: cpu: at91: clean up peripheral clock code
Wenyou Yang
- [U-Boot] [PATCH v4 4/5] board: atmel: clean up peripheral clock code
Wenyou Yang
- [U-Boot] [PATCH v4 5/5] drivers: at91: clean up peripheral clock code
Wenyou Yang
- [U-Boot] [PATCH v4 0/3] ARM: at91: add PLLB handle functions
Wenyou Yang
- [U-Boot] [PATCH v4 1/3] ARM: at91: clock: add PLLB enable/disable functions
Wenyou Yang
- [U-Boot] [PATCH v4 2/3] drivers: usb: ohci-at91: clean up the PLLB code
Wenyou Yang
- [U-Boot] [PATCH v4 3/3] board: atmel: siemens: clean up PLLB code
Wenyou Yang
- [U-Boot] [PATCH] ARM: at91: sama5d2: configure the L2 cache memory
Yang, Wenyou
- [U-Boot] [PATCH v2] ARM: at91: sama5d2: configure the L2 cache memory
Yang, Wenyou
- [U-Boot] [PATCH 0/2] board: atmel: add SAMA5D2 PTC Engineering board
Wenyou Yang
- [U-Boot] [PATCH 1/2] ARM: at91: sama5d2: add macro & field definitions
Wenyou Yang
- [U-Boot] [PATCH 2/2] board: atmel: add SAMA5D2 PTC Engineering board
Wenyou Yang
- [U-Boot] [PATCH] ls2085a: Correct the model & board name of RDB and QDS
Stuart Yoder
- [U-Boot] [PATCH 0/7] support mapping PCI device ids to stream ids for MSIs
Stuart Yoder
- [U-Boot] [PATCH 1/7] armv8: ls2080a: remove obsolete stream ID partitioning support
Stuart Yoder
- [U-Boot] [PATCH 2/7] armv8: ls2080a: update stream ID partitioning info
Stuart Yoder
- [U-Boot] [PATCH 3/7] pci: make pci_get_hose_head() available to external users
Stuart Yoder
- [U-Boot] [PATCH 4/7] pci/layerscape: add support for LUT
Stuart Yoder
- [U-Boot] [PATCH 5/7] pci/layerscape: add stream ID allocator
Stuart Yoder
- [U-Boot] [PATCH 6/7] pci/layerscape: fdt: function to set msi-map entries
Stuart Yoder
- [U-Boot] [PATCH 7/7] pci/layerscape: set LUT and msi-map for discovered PCI devices
Stuart Yoder
- [U-Boot] [PATCH 7/7] pci/layerscape: set LUT and msi-map for discovered PCI devices
Stuart Yoder
- [U-Boot] [PATCH 7/7] pci/layerscape: set LUT and msi-map for discovered PCI devices
Stuart Yoder
- [U-Boot] [PATCH 0/7 v2] support mapping PCI device ids to stream ids for MSIs
Stuart Yoder
- [U-Boot] [PATCH 1/7 v2] armv8: ls2080a: remove obsolete stream ID partitioning support
Stuart Yoder
- [U-Boot] [PATCH 3/7 v2] pci: make pci_get_hose_head() available to external users
Stuart Yoder
- [U-Boot] [PATCH 4/7 v2] pci/layerscape: add support for LUT
Stuart Yoder
- [U-Boot] [PATCH 5/7 v2] pci/layerscape: add stream ID allocator
Stuart Yoder
- [U-Boot] [PATCH 6/7 v2] pci/layerscape: fdt: function to set msi-map entries
Stuart Yoder
- [U-Boot] [PATCH 7/7 v2] pci/layerscape: set LUT and msi-map for discovered PCI devices
Stuart Yoder
- [U-Boot] [PATCH 7/7 v2] pci/layerscape: set LUT and msi-map for discovered PCI devices
Stuart Yoder
- [U-Boot] [PATCH 4/7 v2] pci/layerscape: add support for LUT
Stuart Yoder
- [U-Boot] [PATCH 0/7 v3] support mapping PCI device ids to stream ids for MSIs
Stuart Yoder
- [U-Boot] [PATCH 1/7 v3] armv8: ls2080a: remove obsolete stream ID partitioning support
Stuart Yoder
- [U-Boot] [PATCH 2/7 v3] armv8: ls2080a: update stream ID partitioning info
Stuart Yoder
- [U-Boot] [PATCH 3/7 v3] pci: make pci_get_hose_head() available to external users
Stuart Yoder
- [U-Boot] [PATCH 4/7 v3] pci/layerscape: add support for LUT
Stuart Yoder
- [U-Boot] [PATCH 5/7 v3] pci/layerscape: add stream ID allocator
Stuart Yoder
- [U-Boot] [PATCH 6/7 v3] pci/layerscape: fdt: function to set msi-map entries
Stuart Yoder
- [U-Boot] [PATCH 7/7 v3] pci/layerscape: set LUT and msi-map for discovered PCI devices
Stuart Yoder
- [U-Boot] Need help for custom board brigup
Derong Zeng
- [U-Boot] [PATCH] rockchip: rk3288: correct sdram setting
Chris Zhong
- [U-Boot] patch for 64bit access issue found in FDT
Terry Zhou
- [U-Boot] patch for 64bit access issue found in FDT
Terry Zhou
- [U-Boot] How to boot bare board binary from U-Boot>
Michael Zimmermann
- [U-Boot] How to boot bare board binary from U-Boot>
Michael Zimmermann
- [U-Boot] where is malloc()?
Michael Zimmermann
- [U-Boot] [PATCH 7/7] pci/layerscape: set LUT and msi-map for discovered PCI devices
Marc Zyngier
- [U-Boot] [PATCH v2] net: bootp: Add environment variable for timeout period
amessier.tyco at gmail.com
- [U-Boot] how does board_init_f() -> board_init_r?
quantumlight
- [U-Boot] where is malloc()?
quantumlight
- [U-Boot] U-Boot loading kernel from mmc question
quantumlight
- [U-Boot] where is malloc()?
quantumlight
- [U-Boot] [PATCH] arm: socfpga: Fix booting from QSPI flash on socdk board.
shengjiangwu
- [U-Boot] [PATCH v2] armv8/ls1043a: Implement workaround for erratum A009660
york sun
- [U-Boot] [Patch V3 2/3] fm: fdt: Move fman ucode fixup to Fman driver code
york sun
- [U-Boot] [PATCH] ls2-2085a: Increase default hugepage count
york sun
- [U-Boot] [PATCH v3] Enable snooping on transactions from CAAM block
york sun
- [U-Boot] [PATCH v1 1/2] Revert "powerpc: mpc85xx: remove P2020DS board support"
york sun
- [U-Boot] [PATCH v1 1/2] Revert "powerpc: mpc85xx: remove P2020DS board support"
york sun
- [U-Boot] [PATCH] board: ls2085aqds: Update kernel_size env variable
york sun
- [U-Boot] [PATCH] armv7: ls102xa: Increase the supported kernel size
york sun
- [U-Boot] [PATCH] driver: net: fsl-mc: Memset dprc_cfg before configuring
york sun
- [U-Boot] [PATCH] driver: net: fsl-mc: Update print to reflect correct string
york sun
- [U-Boot] [PATCH] armv8/ls1043aqds: fix DSPI/QSPI node in dts file
york sun
- [U-Boot] [PATCH][v2] ARMv8:ls2-2080a: Implement core ERRATA 829520, 833471
york sun
- [U-Boot] [PATCH] ARMv8:ls2080: Move the core errata defines out of board specific file
york sun
- [U-Boot] Please pull u-boot-fsl-qoriq master
york sun
- [U-Boot] [PATCH v1 1/2] Revert "powerpc: mpc85xx: remove P2020DS board support"
york sun
- [U-Boot] [PATCH v1 1/2] Revert "powerpc: mpc85xx: remove P2020DS board support"
york sun
- [U-Boot] [PATCH v1 1/2] Revert "powerpc: mpc85xx: remove P2020DS board support"
york sun
- [U-Boot] [PATCH] ls2-2085a: Increase default hugepage count
york sun
- [U-Boot] [PATCH] armv8/ls2080ardb: Enable VID support
york sun
- [U-Boot] [Patch V3 2/3] fm: fdt: Move fman ucode fixup to Fman driver code
york sun
- [U-Boot] [Patch V3 2/3] fm: fdt: Move fman ucode fixup to Fman driver code
york sun
- [U-Boot] exclude email by patman
york sun
- [U-Boot] exclude email by patman
york sun
- [U-Boot] exclude email by patman
york sun
- [U-Boot] [RFC PATCH v1 0/2] Convert ls1021aqds to use driver model for serial ports
york sun
- [U-Boot] [PATCH 2/3][v3] Data types defined for 64 bit physical address
york sun
- [U-Boot] [PATCH 2/3][v3] Data types defined for 64 bit physical address
york sun
- [U-Boot] [Patch V3 2/3] fm: fdt: Move fman ucode fixup to Fman driver code
york sun
- [U-Boot] [PATCH][v2] armv8/ls2080ardb: Enable VID support
york sun
- [U-Boot] exclude email by patman
york sun
- [U-Boot] [PATCH 01/12] mtd: spi-nor: Copy sf_dataflash
york sun
- [U-Boot] [PATCH 01/12] mtd: spi-nor: Copy sf_dataflash
york sun
- [U-Boot] [RFC PATCH v1 2/2] arm: ls1021aqds: Enable driver model lpuart serial driver
york sun
- [U-Boot] [PATCH 0/9] arm64: Unify MMU code
york sun
- [U-Boot] [PATCH 0/9] arm64: Unify MMU code
york sun
- [U-Boot] [PATCH 0/9] arm64: Unify MMU code
york sun
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
york sun
- [U-Boot] [PATCH 0/9] arm64: Unify MMU code
york sun
- [U-Boot] [PATCH 0/9] arm64: Unify MMU code
york sun
- [U-Boot] [PATCH 2/3][v3] Data types defined for 64 bit physical address
york sun
- [U-Boot] [RFC PATCH v4 1/3] sandbox: Fix compiling warning on 32-bit host
york sun
- [U-Boot] [RFC PATCH v4 2/3] common: Convert ulong to phys_addr_t for image addresses
york sun
- [U-Boot] [PATCH v2 1/2] arm: ls1021aqds: Convert to driver model and enable serial support
york sun
- [U-Boot] [PATCH v2 2/2] arm: ls1021aqds: Enable driver model lpuart serial driver
york sun
- [U-Boot] [PATCH] ls2-2085a: Increase default hugepage count
york sun
- [U-Boot] [PATCH] drivers/crypto/fsl : Allocate output ring with size aligned to CACHELNE SIZE
york sun
- [U-Boot] [PATCH v4] powerpc/SECURE_BOOT: Add PAMU driver
york sun
- [U-Boot] [PATCH] armv8/ls1043a: enable workaround for errarum A009942
york sun
- [U-Boot] [PATCH v3] armv8/ls1043a: Implement workaround for erratum A009660
york sun
- [U-Boot] [PATCH] arm: ls1021a: Add QSPI or IFC support in SD boot for LS1021AQDS board
york sun
- [U-Boot] [PATCH 1/2] armv8: ls2080: Add mcinitcmd env variable in default env
york sun
- [U-Boot] [PATCH 2/2] armv8: ls2080: Update bootcmd env variable
york sun
- [U-Boot] [Patch V5 1/4] qe: move drivers/qe/qe.h to include/fsl_qe.h
york sun
- [U-Boot] [Patch V5 2/4] fm: fdt: Move fman ucode fixup to driver code
york sun
- [U-Boot] [Patch V5 3/4] driver/fm: fdt.c: fix fdt_fixup_fman_firmware() to support ARM platforms
york sun
- [U-Boot] [Patch V5 4/4] armv8/fsl-layerscape: fdt: add fixup for Fman ucode
york sun
- [U-Boot] [Patch V2] armv8/ls1043aqds: Add USB support for ls1043aqds
york sun
- [U-Boot] [PATCH v5 1/4] driver: qe: Mask the codes not used for micro QE
york sun
- [U-Boot] [PATCH v5 2/4] board: ls1043ardb: Add micro QE support for ls1043ardb
york sun
- [U-Boot] [PATCH v5 3/4] borad: ls1043rdb: Move USB muxing config to config_board_mux
york sun
- [U-Boot] [PATCH v5 4/4] board: ls1043ardb: Modify pin-muxing code for USB and QE-HDLC
york sun
- [U-Boot] [PATCH] armv7: ls102xa: Move smmu and stream id initialization into the common soc code
york sun
- [U-Boot] Please pull u-boot-fsl-qoriq master
york sun
- [U-Boot] [RFC PATCH v4 3/3] common: Fix load and entry addresses in FIT image
york sun
- [U-Boot] [RFC PATCH v4 3/3] common: Fix load and entry addresses in FIT image
york sun
- [U-Boot] [RFC PATCH v5 1/4] common: Convert ulong to phys_addr_t for image addresses
york sun
- [U-Boot] [RFC PATCH v5 1/4] common: Convert ulong to phys_addr_t for image addresses
york sun
- [U-Boot] [RFC PATCH v5 1/4] common: Convert ulong to phys_addr_t for image addresses
york sun
- [U-Boot] [PATCH] powerpc/t208xqds: fix esdhc peripheral clock support
york sun
- [U-Boot] Please pull u-boot-mpc85xx master
york sun
- [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support
york sun
- [U-Boot] How to boot bare board binary from U-Boot>
veerendranathj
- [U-Boot] How to boot bare board binary from U-Boot>
veerendranathj
- [U-Boot] [PATCH] common: Add support for environment file in EXT4.
stuartl at vrt.com.au
Last message date:
Mon Feb 29 23:55:19 CET 2016
Archived on: Tue Mar 1 07:19:59 CET 2016
This archive was generated by
Pipermail 0.09 (Mailman edition).