[U-Boot] i.MX286 U-Boot fails with code HTLLCL0x8050100b

[Stuart Longland]

On 15/02/16 14:09, Stuart Longland wrote:
> I ask again: Is there somewhere else I should be looking for the cause
> of the above issue?

Well, found my issue in the end I think.  In exasperation I dd'ed one of
my working SD card images, proved that the machine booted, then dd'ed
the newly build U-Boot image over the top of the old U-Boot partition.

It worked.

So I'll put this down to the i.MX286 boot ROM being *exceptionally*
picky about partition placement.  If things aren't *exactly* right,
it'll flatly refuse to work.

I might see if I can reproduce the bad image and hex-dump it to better
understand what was "wrong".
-- 
Stuart Longland
Systems Engineer
     _ ___
\  /|_) |                           T: +61 7 3535 9619
 \/ | \ |     38b Douglas Street    F: +61 7 3535 9699
   SYSTEMS    Milton QLD 4064       http://www.vrt.com.au