[U-Boot] [PATCH 2/2] armv8: ls2080: Update bootcmd env variable

[Prabhakar Kushwaha]

Before Linux boot DPL must be deployed to DPAA2 interface.
So update bootcmd env variable to make sure DPL deployment before
Linux boot.

Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>
---
 include/configs/ls2080a_common.h | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index 0d33042..091c9e1 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -272,8 +272,9 @@ unsigned long long get_qixis_addr(void);
 				"earlycon=uart8250,mmio,0x21c0500" \
 				"ramdisk_size=0x2000000 default_hugepagesz=2m" \
 				" hugepagesz=2m hugepages=16"
-#define CONFIG_BOOTCOMMAND		"cp.b $kernel_start $kernel_load "     \
-					"$kernel_size && bootm $kernel_load"
+#define CONFIG_BOOTCOMMAND	"fsl_mc apply dpl 0x580700000 &&" \
+				" cp.b $kernel_start $kernel_load" \
+				" $kernel_size && bootm $kernel_load"
 #define CONFIG_BOOTDELAY		10
 
 /* Monitor Command Prompt */
-- 
1.9.1