[U-Boot] [PATCH] ARM : DRA7: Switch QSPI to use MODE-0 at 64MHz

Vignesh R vigneshr at ti.com
Wed Feb 10 06:21:43 CET 2016


According to Data Manual(SPRS915P) of AM572x, TI QSPI controller on
DRA74 EVM(rev 1.1+) can support up to 64MHz in MODE-0, whereas MODE-3 is
limited to 48MHz. Hence, switch to MODE-0 for better throughput.
Also, add IODelay parameters for the same.

Signed-off-by: Vignesh R <vigneshr at ti.com>
---
 board/ti/dra7xx/mux_data.h   | 30 +++++++++++++++++++++++-------
 include/configs/dra7xx_evm.h |  4 ++--
 2 files changed, 25 insertions(+), 9 deletions(-)

diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h
index 1bfb36243b5f..bec3b553bcff 100644
--- a/board/ti/dra7xx/mux_data.h
+++ b/board/ti/dra7xx/mux_data.h
@@ -213,12 +213,12 @@ const struct pad_conf_entry dra74x_core_padconf_array[] = {
 	{GPMC_A9, (M3 | PIN_INPUT_PULLDOWN)},	/* gpmc_a9.vout3_vsync */
 	{GPMC_A10, (M3 | PIN_INPUT_PULLDOWN)},	/* gpmc_a10.vout3_de */
 	{GPMC_A11, (M14 | PIN_INPUT_PULLDOWN)},	/* gpmc_a11.gpio2_1 */
-	{GPMC_A13, (M1 | PIN_INPUT_PULLDOWN)},	/* gpmc_a13.qspi1_rtclk */
-	{GPMC_A14, (M1 | PIN_INPUT_PULLDOWN)},	/* gpmc_a14.qspi1_d3 */
-	{GPMC_A15, (M1 | PIN_INPUT_PULLDOWN)},	/* gpmc_a15.qspi1_d2 */
-	{GPMC_A16, (M1 | PIN_INPUT_PULLDOWN)},	/* gpmc_a16.qspi1_d0 */
-	{GPMC_A17, (M1 | PIN_INPUT_PULLDOWN)},	/* gpmc_a17.qspi1_d1 */
-	{GPMC_A18, (M1 | PIN_INPUT_PULLDOWN)},	/* gpmc_a18.qspi1_sclk */
+	{GPMC_A13, (M1 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* gpmc_a13.qspi1_rtclk */
+	{GPMC_A14, (M1 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* gpmc_a14.qspi1_d3 */
+	{GPMC_A15, (M1 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* gpmc_a15.qspi1_d2 */
+	{GPMC_A16, (M1 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* gpmc_a16.qspi1_d0 */
+	{GPMC_A17, (M1 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* gpmc_a17.qspi1_d1 */
+	{GPMC_A18, (M1 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* gpmc_a18.qspi1_sclk */
 	{GPMC_A19, (M1 | PIN_INPUT_PULLUP)},	/* gpmc_a19.mmc2_dat4 */
 	{GPMC_A20, (M1 | PIN_INPUT_PULLUP)},	/* gpmc_a20.mmc2_dat5 */
 	{GPMC_A21, (M1 | PIN_INPUT_PULLUP)},	/* gpmc_a21.mmc2_dat6 */
@@ -229,7 +229,7 @@ const struct pad_conf_entry dra74x_core_padconf_array[] = {
 	{GPMC_A26, (M1 | PIN_INPUT_PULLUP)},	/* gpmc_a26.mmc2_dat2 */
 	{GPMC_A27, (M1 | PIN_INPUT_PULLUP)},	/* gpmc_a27.mmc2_dat3 */
 	{GPMC_CS1, (M1 | PIN_INPUT_PULLUP)},	/* gpmc_cs1.mmc2_cmd */
-	{GPMC_CS2, (M1 | PIN_INPUT_PULLUP)},	/* gpmc_cs2.qspi1_cs0 */
+	{GPMC_CS2, (M1 | PIN_INPUT_PULLUP | MANUAL_MODE)},	/* gpmc_cs2.qspi1_cs0 */
 	{GPMC_CS3, (M3 | PIN_INPUT_PULLUP)},	/* gpmc_cs3.vout3_clk */
 	{VIN1A_CLK0, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* vin1a_clk0.vin1a_clk0 */
 	{VIN1A_DE0, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* vin1a_de0.vin1a_de0 */
@@ -430,6 +430,14 @@ const struct iodelay_cfg_entry dra742_es1_1_iodelay_cfg_array[] = {
 	{0x0AE0, 189, 1462},	/* CFG_VIN2A_D21_IN */
 	{0x0AEC, 232, 1278},	/* CFG_VIN2A_D22_IN */
 	{0x0AF8, 0, 1397},	/* CFG_VIN2A_D23_IN */
+	{0x0144, 0, 0},         /* CFG_GPMC_A13_IN */
+	{0x0150, 1976, 1389},   /* CFG_GPMC_A14_IN */
+	{0x015C, 1872, 1408},   /* CFG_GPMC_A15_IN */
+	{0x0168, 1914, 1506},   /* CFG_GPMC_A16_IN */
+	{0x0170, 57, 0},        /* CFG_GPMC_A16_OUT */
+	{0x0174, 1904, 1471},   /* CFG_GPMC_A17_IN */
+	{0x0188, 1690, 0},      /* CFG_GPMC_A18_OUT */
+	{0x0374, 0, 0},         /* CFG_GPMC_CS2_OUT */
 };
 
 const struct iodelay_cfg_entry dra742_es2_0_iodelay_cfg_array[] = {
@@ -486,6 +494,14 @@ const struct iodelay_cfg_entry dra742_es2_0_iodelay_cfg_array[] = {
 	{0x0AE0, 130, 1450},	/* CFG_VIN2A_D21_IN */
 	{0x0AEC, 144, 1269},	/* CFG_VIN2A_D22_IN */
 	{0x0AF8, 0, 1330},	/* CFG_VIN2A_D23_IN */
+	{0x0144, 0, 0},         /* CFG_GPMC_A13_IN */
+	{0x0150, 2575, 966},    /* CFG_GPMC_A14_IN */
+	{0x015C, 2503, 889},    /* CFG_GPMC_A15_IN */
+	{0x0168, 2528, 1007},   /* CFG_GPMC_A16_IN */
+	{0x0170, 0, 0},         /* CFG_GPMC_A16_OUT */
+	{0x0174, 2533, 980},    /* CFG_GPMC_A17_IN */
+	{0x0188, 590, 0},       /* CFG_GPMC_A18_OUT */
+	{0x0374, 0, 0},         /* CFG_GPMC_CS2_OUT */
 };
 #endif
 
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 9d6242105011..465828301447 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -138,8 +138,8 @@
 #define CONFIG_CMD_SF
 #define CONFIG_CMD_SPI
 #define CONFIG_TI_SPI_MMAP
-#define CONFIG_SF_DEFAULT_SPEED                48000000
-#define CONFIG_DEFAULT_SPI_MODE                SPI_MODE_3
+#define CONFIG_SF_DEFAULT_SPEED                64000000
+#define CONFIG_SF_DEFAULT_MODE                 SPI_MODE_0
 #define CONFIG_QSPI_QUAD_SUPPORT
 
 #ifdef CONFIG_SPL_BUILD
-- 
2.7.0



More information about the U-Boot mailing list