[U-Boot] [PATCHv4 0/9] Migrate NXP/Freescale Vybrid based boards to support pure DT

[Stefano Babic]

On 27/01/2016 06:01, Bhuvanchandra DV wrote:
> Changes since v3:
> - Add missing space in device tree.
> - Reorder the patchset to avoid broken state.
> 
> Changes since v2:
> - Split the patch for updating the license string.
> - Reorder the patchset to avoid broken state.
> 
> Changes since v1:
> - Update the license string in device tree's.
> - Update all lpuart's uart nodes in device tree.
> - Dropped *_dtb_defconfig and updated the default defconfig's with DT support.
> - Reordered defconfig's using defconfig via savedefconfig.
> - Use one patch to update all Vybrid based board defconfig's.
> - Dropped vybrid_gpio driver legacy code. Thanks! Stefan for pointing this.
> - Dropped the legacy way of enabling GPIO, UART and SPI on NXP/Freescale Vybrid
>   based board's.
> 
> - Compile checked for vf610twr and pcm052  since I don't have access
>   to such hardware at my end. Reviewer's and tester's welcome!
> 
> Bhuvanchandra DV (9):
>   arm: vybrid: Enable lpuart support
>   arm: vybrid: Update the license string
>   arm: colibri-vf: Enable serial support
>   arm: vf610-twr: Add device tree file's
>   arm: pcm052: Add device tree file's
>   arm: vybrid: Update defconfig's
>   arm: vybrid: Drop enabling GPIO, SPI and UART in legacy mode
>   dm: lpuart: Drop the legacy code
>   dm: vybrid_gpio: Drop legacy code
> 
>  arch/arm/dts/Makefile            |   4 +-
>  arch/arm/dts/pcm052.dts          |  22 +++++++++
>  arch/arm/dts/vf-colibri.dtsi     |  15 ++++--
>  arch/arm/dts/vf.dtsi             |  48 +++++++++++++++++--
>  arch/arm/dts/vf500-colibri.dts   |   5 --
>  arch/arm/dts/vf610-colibri.dts   |   5 --
>  arch/arm/dts/vf610-twr.dts       |  22 +++++++++
>  configs/colibri_vf_defconfig     |   8 ++++
>  configs/colibri_vf_dtb_defconfig |  14 ------
>  configs/pcm052_defconfig         |   7 +++
>  configs/vf610twr_defconfig       |   7 +++
>  configs/vf610twr_nand_defconfig  |   7 +++
>  drivers/gpio/vybrid_gpio.c       |  18 -------
>  drivers/serial/serial_lpuart.c   | 101 +--------------------------------------
>  include/configs/colibri_vf.h     |  13 -----
>  include/configs/pcm052.h         |   3 --
>  include/configs/vf610twr.h       |   3 --
>  17 files changed, 131 insertions(+), 171 deletions(-)
>  create mode 100644 arch/arm/dts/pcm052.dts
>  create mode 100644 arch/arm/dts/vf610-twr.dts
>  delete mode 100644 configs/colibri_vf_dtb_defconfig
> 
Whole series applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================