[U-Boot] [U-Boot,v3] ARM: Add Support for the VInCo platform

[Andreas Bießmann]

Hi Gregory,

just ran another complete build an realized that you missed to add an
MAINTAINERS entry for the vinco files:

---8<---
abiessmann at punisher % ./tools/buildman/buildman -o
/tmp/uboot-build-atmel arm avr32
WARNING: no status info for 'ds414'
WARNING: no maintainers for 'ds414'
WARNING: no status info for 'ls1043aqds_lpuart'
WARNING: no maintainers for 'ls1043aqds_lpuart'
WARNING: no status info for 'vinco'
WARNING: no maintainers for 'vinco'
WARNING: no status info for 'evb-rk3036'
WARNING: no maintainers for 'evb-rk3036'
WARNING: no status info for 'hikey'
WARNING: no maintainers for 'hikey'
WARNING: no status info for 'kylin-rk3036'
WARNING: no maintainers for 'kylin-rk3036'
Building current source for 534 boards (8 threads, 1 job per thread)
--->8---

Could you please send a followup patch?

Andreas

On 19.02.2016 09:06, Gregory CLEMENT wrote:
> Hi Andreas,
>  
>  On jeu., févr. 18 2016, Andreas Bießmann <andreas.devel at googlemail.com> wrote:
> 
>> Dear Gregory CLEMENT,
>>
>> Gregory CLEMENT <gregory.clement at free-electrons.com> writes:
>>> The Versatile Industrial Communication platform is a community oriented
>>> board from Landis + Gyr. It comes with:
>>> - an RS-485 port
>>> - 2 Ethernet ports
>>> - a wireless M-BUS
>>> - a 4G modem
>>> - a 4MB SPI flash
>>> - a 4GB eMMC
>>>
>>> Signed-off-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
>>> Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>
>>> [rebase on current TOT]
>>> Signed-off-by: Andreas Bießmann <andreas.devel at googlemail.com>
>>> ---
>>> arch/arm/mach-at91/Kconfig |   6 ++
>>> board/l+g/vinco/Kconfig    |  12 +++
>>> board/l+g/vinco/Makefile   |   1 +
>>> board/l+g/vinco/vinco.c    | 212 +++++++++++++++++++++++++++++++++++++++++++++
>>> configs/vinco_defconfig    |  13 +++
>>> include/configs/vinco.h    | 168 +++++++++++++++++++++++++++++++++++
>>> 6 files changed, 412 insertions(+)
>>> create mode 100644 board/l+g/vinco/Kconfig
>>> create mode 100644 board/l+g/vinco/Makefile
>>> create mode 100644 board/l+g/vinco/vinco.c
>>> create mode 100644 configs/vinco_defconfig
>>> create mode 100644 include/configs/vinco.h
>>
>> applied to u-boot-atmel/master, thanks!
>>
>> I had to rebase and remove an empty newline at EOF
>>  in  vinco.h.
> 
> Thanks!
> 
> Gregory
> 
>>
>> Best regards,
>> Andreas Bießmann
>