[U-Boot] [PATCH v2] sunxi: power: add support for sy8106a driver
Jelle van der Waa
jelle at vdwaa.nl
Tue Feb 23 18:47:19 CET 2016
SY8106A is a PMIC which is used on the Allwinner
H3 Orange Pi Pc and Plus board. The VOUT1_SEL register is
implemented to set the default V-CPU voltage to 1200 mV.
This driver is required to retain the SY8106A V-CPU
voltage after a software reset. On cold boot the default
SY8106A output voltage is selected by a pair of resistors
and happens to be 1.2V on the Orange Pi PC and Plus.
Signed-off-by: Jelle van der Waa <jelle at vdwaa.nl>
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
Tested-by: Siarhei Siamashka <siarhei.siamashka at gmail.com>
Acked-by: Siarhei Siamashka <siarhei.siamashka at gmail.com>
---
Changes in v2
- Fixed typo in commit message thea => the.
- Made config R_I2C_ENABLE depend on SY8106A_POWER.
- Removed 'default n' from config R_I2C_ENABLE
- Changed SY8106A_POWER description from "most" to "some" boards.
- Added license/copyright to include/sy8106a.h and
drivers/power/sy8106a.c.
---
board/sunxi/Kconfig | 5 ++++-
board/sunxi/board.c | 5 +++++
configs/orangepi_pc_defconfig | 2 +-
drivers/power/Kconfig | 16 ++++++++++++++++
drivers/power/Makefile | 1 +
drivers/power/sy8106a.c | 29 +++++++++++++++++++++++++++++
include/configs/sunxi-common.h | 6 ++++--
include/sy8106a.h | 11 +++++++++++
8 files changed, 71 insertions(+), 4 deletions(-)
create mode 100644 drivers/power/sy8106a.c
create mode 100644 include/sy8106a.h
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index a334aa3..5e9d3af 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -372,11 +372,14 @@ config I2C3_ENABLE
See I2C0_ENABLE help text.
endif
+if SUNXI_GEN_SUN6I
config R_I2C_ENABLE
bool "Enable the PRCM I2C/TWI controller"
- default n
+ # This is used for the pmic on H3
+ default y if SY8106A_POWER
---help---
Set this to y to enable the I2C controller which is part of the PRCM.
+endif
if MACH_SUN7I
config I2C4_ENABLE
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 420481a..15b7af6 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -25,6 +25,7 @@
#include <asm/io.h>
#include <nand.h>
#include <net.h>
+#include <sy8106a.h>
#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
/* So that we can use pin names in Kconfig and sunxi_name_to_gpio() */
@@ -436,6 +437,10 @@ void sunxi_board_init(void)
int power_failed = 0;
unsigned long ramsize;
+#ifdef CONFIG_SY8106A_POWER
+ power_failed = sy8106a_set_vout1(CONFIG_SY8106A_VOUT1_VOLT);
+#endif
+
#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER
power_failed = axp_init();
diff --git a/configs/orangepi_pc_defconfig b/configs/orangepi_pc_defconfig
index ea9ed87..29a8da6 100644
--- a/configs/orangepi_pc_defconfig
+++ b/configs/orangepi_pc_defconfig
@@ -12,4 +12,4 @@ CONFIG_SPL=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
-CONFIG_R_I2C_ENABLE=y
+CONFIG_SY8106A_POWER=y
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 10683a2..adc6455 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -48,6 +48,13 @@ config AXP818_POWER
Say y here to enable support for the axp818 pmic found on
A83T dev board.
+config SY8106A_POWER
+ boolean "SY8106A pmic support"
+ depends on MACH_SUN8I_H3
+ ---help---
+ Select this to enable support for the SY8106A pmic found on some
+ H3 boards.
+
endchoice
config AXP_DCDC1_VOLT
@@ -232,4 +239,13 @@ config AXP_ELDO3_VOLT
1.2V for the SSD2828 chip (converter of parallel LCD interface
into MIPI DSI).
+config SY8106A_VOUT1_VOLT
+ int "SY8106A pmic VOUT1 voltage"
+ depends on SY8106A_POWER
+ default 1200
+ ---help---
+ Set the voltage (mV) to program the SY8106A pmic VOUT1. This
+ is typically used to power the VDD-CPU and should be 1200mV.
+ Values can range from 680mV till 1950mV.
+
endmenu
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 0fdbca3..690faa0 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_AXP221_POWER) += axp221.o
obj-$(CONFIG_AXP818_POWER) += axp818.o
obj-$(CONFIG_EXYNOS_TMU) += exynos-tmu.o
obj-$(CONFIG_FTPMU010_POWER) += ftpmu010.o
+obj-$(CONFIG_SY8106A_POWER) += sy8106a.o
obj-$(CONFIG_TPS6586X_POWER) += tps6586x.o
obj-$(CONFIG_TWL4030_POWER) += twl4030.o
obj-$(CONFIG_TWL6030_POWER) += twl6030.o
diff --git a/drivers/power/sy8106a.c b/drivers/power/sy8106a.c
new file mode 100644
index 0000000..bbf116f
--- /dev/null
+++ b/drivers/power/sy8106a.c
@@ -0,0 +1,29 @@
+/*
+ * (C) Copyright 2016
+ * Jelle van der Waa <jelle at vdwaa.nl>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <i2c.h>
+#include <sy8106a.h>
+
+#define SY8106A_I2C_ADDR 0x65
+#define SY8106A_VOUT1_SEL 1
+#define SY8106A_VOUT1_SEL_ENABLE (1 << 7)
+
+static u8 sy8106a_mvolt_to_cfg(int mvolt, int min, int max, int div)
+{
+ if (mvolt < min)
+ mvolt = min;
+ else if (mvolt > max)
+ mvolt = max;
+
+ return (mvolt - min) / div;
+}
+
+int sy8106a_set_vout1(unsigned int mvolt)
+{
+ u8 data = sy8106a_mvolt_to_cfg(mvolt, 680, 1950, 10) | SY8106A_VOUT1_SEL_ENABLE;
+ return i2c_write(SY8106A_I2C_ADDR, SY8106A_VOUT1_SEL, 1, &data, 1);
+}
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index b4dfb3c..40850e5 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -206,7 +206,8 @@
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
/* I2C */
-#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER
+#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
+ defined CONFIG_SY8106A_POWER
#define CONFIG_SPL_I2C_SUPPORT
#endif
@@ -240,7 +241,8 @@ extern int soft_i2c_gpio_scl;
/* PMU */
#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
- defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER
+ defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \
+ defined CONFIG_SY8106A_POWER
#define CONFIG_SPL_POWER_SUPPORT
#endif
diff --git a/include/sy8106a.h b/include/sy8106a.h
new file mode 100644
index 0000000..32e8c43
--- /dev/null
+++ b/include/sy8106a.h
@@ -0,0 +1,11 @@
+/*
+ * (C) Copyright 2016
+ * Jelle van der Waa <jelle at vdwaa.nl>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#ifndef _SY8106A_PMIC_H_
+
+int sy8106a_set_vout1(unsigned int mvolt);
+
+#endif
--
2.7.1
More information about the U-Boot
mailing list