[U-Boot] test/py main_signon

[Michal Simek]

Hi Stephen,

On 16.2.2016 22:38, Stephen Warren wrote:
> On 02/16/2016 12:08 PM, Michal Simek wrote:
>> Hi Stephen,
>>
>> 2016-02-16 17:39 GMT+01:00 Stephen Warren <swarren at wwwdotorg.org
>> <mailto:swarren at wwwdotorg.org>>:
>>
>>     On 02/16/2016 09:04 AM, Michal Simek wrote:
>>
>>         Hi Heiko,
>>
>>         On 16.2.2016 14:32, Heiko Schocher wrote:
>>
>>             Hello Michal,
>>
>>             Am 16.02.2016 um 13:12 schrieb Michal Simek:
>>
>>                 Hi Stephen,
>>
>>                 trying to run the latest testing on zynq board and
>>                 getting this
>>                 main_signon error.
>>
>>                 This is what I am running
>>                 ./test/py/test.py --bd zynq_zc702  --build
>>                 --board-identity zc702
>>                 and getting below.
>>
>>
>>             Does this board has SPL support without SPL serial output?
>>
>>
>>         I do load u-boot via jtag that's why SPL logs are not visible.
>>
>>             If so, can you try my patch:
>>             http://patchwork.ozlabs.org/patch/583348/
>>
>>
>>         I have applied your patch but it is still not working.
>>
>>         If I run full flow with SPL then I can't see any issue.
>>
>>
>>     I assume this is resolved then?
>>
>>
>> Unfortunately both cases should work because SPL is not only one first
>> stage bootloader
>> which can be used. I didn't test zynqmp but there is no SPL and the same
>> problem is
>> probably there too. Or is there any dependency that if SPL is not build
>> than testing system
>> is not expecting it?
>>
>> I will look tmr at jtag boot mode with SPL if I can get it work.
> 
> The test scripts currently assume that if SPL is enabled in the U-Boot
> configuration file, then U-Boot SPL will run and print its signon
> message to the serial console. If you're starting U-Boot using a
> technique that invalidates this assumption, it won't work currently, as
> you found.
> 
> It's pretty easy to add a flag in the boardenv file to tell the system
> not to expect SPL signon. If you take a look at my second suggestion in:
> 
> http://lists.denx.de/pipermail/u-boot/2016-February/245759.html
> [U-Boot] [PATCH] test/py: only check for SPL signature if SPL uses
> serial output
> 
> ... then it's probably a simple as adding a third variable into the if
> condition, where that variable gets looks up from the "board
> environment", similar to:
> 
> spl_skipped = u_boot_console.config.env.get('env__spl_skipped', False)

ok. I see. Anyway I have done this change locally and it is working good.
Heiko: Are you able to add this one more checking to your patch? Or
should I wait till you add your patch to the tree?

Stephen: Do you have your u-boot-test-hooks for qemu?

Thanks,
Michal

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160217/e7c4d476/attachment.sig>