[U-Boot] [PATCH 7/7 v2] pci/layerscape: set LUT and msi-map for discovered PCI devices

Stuart Yoder stuart.yoder at nxp.com
Fri Feb 26 00:06:23 CET 2016


From: Stuart Yoder <stuart.yoder at nxp.com>

for all PCI devices discovered in a system:
  -allocate a LUT (look-up-table) entry in that PCI controller
  -allocate a stream ID for the device
  -program and enable a LUT entry (maps PCI requester id to stream ID)
  -set the msi-map property on the controller reflecting the
   LUT mapping

basic bus scanning loop/logic was taken from drivers/pci/pci.c
pci_hose_scan_bus().

Signed-off-by: Stuart Yoder <stuart.yoder at nxp.com>
---
-v2
  -removed skip of host bridge when scanning the bus

 drivers/pci/pcie_layerscape.c |   64 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 64 insertions(+)

diff --git a/drivers/pci/pcie_layerscape.c b/drivers/pci/pcie_layerscape.c
index dfafaf2..3470210 100644
--- a/drivers/pci/pcie_layerscape.c
+++ b/drivers/pci/pcie_layerscape.c
@@ -569,6 +569,66 @@ static void fdt_pcie_set_msi_map_entry(void *blob, struct ls_pcie *pcie,
 	fdt_appendprop_u32(blob, nodeoffset, "msi-map", 1);
 }
 
+static void fdt_fixup_pcie(void *blob)
+{
+	unsigned int found_multi = 0;
+	unsigned char header_type;
+	int index;
+	u32 streamid;
+	pci_dev_t dev;
+	int bus;
+	unsigned short id;
+	struct pci_controller *hose;
+	struct ls_pcie *pcie;
+	int i;
+
+	for (i = 0, hose = pci_get_hose_head(); hose; hose = hose->next, i++) {
+		pcie = hose->priv_data;
+		for (bus = hose->first_busno; bus <= hose->last_busno; bus++) {
+
+			for (dev =  PCI_BDF(bus, 0, 0);
+			     dev <  PCI_BDF(bus, PCI_MAX_PCI_DEVICES - 1,
+					    PCI_MAX_PCI_FUNCTIONS - 1);
+			     dev += PCI_BDF(0, 0, 1)) {
+
+				if (PCI_FUNC(dev) && !found_multi)
+					continue;
+
+				pci_read_config_word(dev, PCI_VENDOR_ID, &id);
+
+				pci_read_config_byte(dev, PCI_HEADER_TYPE,
+						     &header_type);
+
+				if ((id == 0xFFFF) || (id == 0x0000))
+					continue;
+
+				if (!PCI_FUNC(dev))
+					found_multi = header_type & 0x80;
+
+				streamid = ls_pcie_next_streamid();
+				if (streamid < 0) {
+					printf("ERROR: no stream ids free\n");
+					continue;
+				}
+
+				index = ls_pcie_next_lut_index(pcie);
+				if (index < 0) {
+					printf("ERROR: no LUT indexes free\n");
+					continue;
+				}
+
+				/* map PCI b.d.f to streamID in LUT */
+				ls_pcie_lut_set_mapping(pcie, index, dev >> 8,
+							streamid);
+
+				/* update msi-map in device tree */
+				fdt_pcie_set_msi_map_entry(blob, pcie, dev >> 8,
+							   streamid);
+			}
+		}
+	}
+}
+
 int ls_pcie_init_ctrl(int busno, enum srds_prtcl dev, struct ls_pcie_info *info)
 {
 	struct ls_pcie *pcie;
@@ -745,6 +805,10 @@ void ft_pci_setup(void *blob, bd_t *bd)
 	#ifdef CONFIG_PCIE4
 	ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE4_ADDR, PCIE4);
 	#endif
+
+	#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+	fdt_fixup_pcie(blob);
+	#endif
 }
 
 #else
-- 
1.7.9.5



More information about the U-Boot mailing list