[U-Boot] [PATCH 4/7 v2] pci/layerscape: add support for LUT
Stuart Yoder
stuart.yoder at nxp.com
Fri Feb 26 00:06:20 CET 2016
From: Stuart Yoder <stuart.yoder at nxp.com>
The per-PCI controller LUT (Look-Up-Table) is a 32-entry table
that maps PCI requester IDs (bus/dev/fun) to a stream ID.
This patch implements infrastructure to enable LUT initialization:
-define registers offsets
-add an index to 'struct ls_pcie' to track next available slot in LUT
-add function to allocate the next available entry index
-add function to program a LUT entry
Signed-off-by: Stuart Yoder <stuart.yoder at nxp.com>
---
-v2
-no changes
drivers/pci/pcie_layerscape.c | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/drivers/pci/pcie_layerscape.c b/drivers/pci/pcie_layerscape.c
index bb29222..6886488 100644
--- a/drivers/pci/pcie_layerscape.c
+++ b/drivers/pci/pcie_layerscape.c
@@ -58,6 +58,13 @@
#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16)
#define PCIE_ATU_UPPER_TARGET 0x91C
+/* LUT registers */
+#define PCIE_LUT_BASE 0x80000
+#define PCIE_LUT_UDR(n) (0x800 + (n) * 8)
+#define PCIE_LUT_LDR(n) (0x804 + (n) * 8)
+#define PCIE_LUT_ENABLE (1 << 31)
+#define PCIE_LUT_ENTRY_COUNT 32
+
#define PCIE_DBI_RO_WR_EN 0x8bc
#define PCIE_LINK_CAP 0x7c
@@ -93,6 +100,7 @@ struct ls_pcie {
void __iomem *dbi;
void __iomem *va_cfg0;
void __iomem *va_cfg1;
+ int next_lut_index;
struct pci_controller hose;
};
@@ -482,6 +490,33 @@ static void ls_pcie_setup_ep(struct ls_pcie *pcie, struct ls_pcie_info *info)
}
}
+
+/*
+ * Return next available LUT index.
+ */
+static u32 ls_pcie_next_lut_index(struct ls_pcie *pcie)
+{
+ if (pcie->next_lut_index < PCIE_LUT_ENTRY_COUNT)
+ return pcie->next_lut_index++;
+ else
+ return -1; /* LUT is full */
+}
+
+/*
+ * Program a single LUT entry
+ */
+static void ls_pcie_lut_set_mapping(struct ls_pcie *pcie, int index, u32 devid,
+ u32 streamid)
+{
+ void __iomem *lut;
+
+ lut = pcie->dbi + PCIE_LUT_BASE;
+
+ /* leave mask as all zeroes, want to match all bits */
+ writel((devid << 16), lut + PCIE_LUT_UDR(index));
+ writel(streamid | PCIE_LUT_ENABLE, lut + PCIE_LUT_LDR(index));
+}
+
int ls_pcie_init_ctrl(int busno, enum srds_prtcl dev, struct ls_pcie_info *info)
{
struct ls_pcie *pcie;
@@ -513,6 +548,7 @@ int ls_pcie_init_ctrl(int busno, enum srds_prtcl dev, struct ls_pcie_info *info)
pcie->va_cfg1 = map_physmem(info->cfg1_phys,
info->cfg1_size,
MAP_NOCACHE);
+ pcie->next_lut_index = 0;
/* outbound memory */
pci_set_region(&hose->regions[0],
--
1.7.9.5
More information about the U-Boot
mailing list