[U-Boot] [PATCH v7 74/76] sf: Drop entire spi-flash framework
Jagan Teki
jteki at openedev.com
Tue Feb 16 20:40:21 CET 2016
All set ready for SPI-NOR.
Cc: Simon Glass <sjg at chromium.org>
Cc: Bin Meng <bmeng.cn at gmail.com>
Cc: Mugunthan V N <mugunthanvnm at ti.com>
Cc: Michal Simek <michal.simek at xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
Signed-off-by: Jagan Teki <jteki at openedev.com>
---
Changes for v7:
- Rebase to previous v7 patch set
MAINTAINERS | 1 -
Makefile | 1 -
cmd/sf.c | 4 +-
common/env_sf.c | 4 +-
drivers/Makefile | 1 -
drivers/mtd/Kconfig | 2 -
drivers/mtd/spi/Kconfig | 131 -----
drivers/mtd/spi/Makefile | 18 -
drivers/mtd/spi/fsl_espi_spl.c | 90 ---
drivers/mtd/spi/sandbox.c | 697 -----------------------
drivers/mtd/spi/sf-uclass.c | 103 ----
drivers/mtd/spi/sf.c | 58 --
drivers/mtd/spi/sf_dataflash.c | 701 ------------------------
drivers/mtd/spi/sf_internal.h | 243 ---------
drivers/mtd/spi/sf_mtd.c | 104 ----
drivers/mtd/spi/sf_params.c | 146 -----
drivers/mtd/spi/sf_probe.c | 181 ------
drivers/mtd/spi/spi_flash.c | 1182 ----------------------------------------
drivers/mtd/spi/spi_spl_load.c | 90 ---
include/spi_flash.h | 225 +-------
20 files changed, 6 insertions(+), 3976 deletions(-)
delete mode 100644 drivers/mtd/spi/Kconfig
delete mode 100644 drivers/mtd/spi/Makefile
delete mode 100644 drivers/mtd/spi/fsl_espi_spl.c
delete mode 100644 drivers/mtd/spi/sandbox.c
delete mode 100644 drivers/mtd/spi/sf-uclass.c
delete mode 100644 drivers/mtd/spi/sf.c
delete mode 100644 drivers/mtd/spi/sf_dataflash.c
delete mode 100644 drivers/mtd/spi/sf_internal.h
delete mode 100644 drivers/mtd/spi/sf_mtd.c
delete mode 100644 drivers/mtd/spi/sf_params.c
delete mode 100644 drivers/mtd/spi/sf_probe.c
delete mode 100644 drivers/mtd/spi/spi_flash.c
delete mode 100644 drivers/mtd/spi/spi_spl_load.c
diff --git a/MAINTAINERS b/MAINTAINERS
index b387207..4b23d18 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -385,7 +385,6 @@ SPI
M: Jagan Teki <jteki at openedev.com>
S: Maintained
T: git git://git.denx.de/u-boot-spi.git
-F: drivers/mtd/spi/
F: drivers/spi/
F: include/spi*
diff --git a/Makefile b/Makefile
index 4e67433..e9579b8 100644
--- a/Makefile
+++ b/Makefile
@@ -636,7 +636,6 @@ libs-y += drivers/mtd/
libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/
libs-y += drivers/mtd/onenand/
libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
-libs-y += drivers/mtd/spi/
libs-y += drivers/mtd/spi-nor/
libs-y += drivers/net/
libs-y += drivers/net/phy/
diff --git a/cmd/sf.c b/cmd/sf.c
index bbdbe52..bf5a3ce 100644
--- a/cmd/sf.c
+++ b/cmd/sf.c
@@ -85,7 +85,7 @@ static int do_spi_flash_probe(int argc, char * const argv[])
unsigned int speed = CONFIG_SF_DEFAULT_SPEED;
unsigned int mode = CONFIG_SF_DEFAULT_MODE;
char *endp;
-#if defined(CONFIG_DM_SPI_FLASH) || defined (CONFIG_DM_MTD_SPI_NOR)
+#ifdef CONFIG_DM_MTD_SPI_NOR
struct udevice *new, *bus_dev;
int ret;
#else
@@ -118,7 +118,7 @@ static int do_spi_flash_probe(int argc, char * const argv[])
return -1;
}
-#if defined(CONFIG_DM_SPI_FLASH) || defined (CONFIG_DM_MTD_SPI_NOR)
+#ifdef CONFIG_DM_MTD_SPI_NOR
/* Remove the old device, otherwise probe will just be a nop */
ret = spi_find_bus_and_cs(bus, cs, &bus_dev, &new);
if (!ret) {
diff --git a/common/env_sf.c b/common/env_sf.c
index 962cac4..a3decbe 100644
--- a/common/env_sf.c
+++ b/common/env_sf.c
@@ -52,7 +52,7 @@ int saveenv(void)
char *saved_buffer = NULL, flag = OBSOLETE_FLAG;
u32 saved_size, saved_offset, sector = 1;
int ret;
-#if defined(CONFIG_DM_SPI_FLASH) || defined (CONFIG_DM_MTD_SPI_NOR)
+#ifdef CONFIG_DM_MTD_SPI_NOR
struct udevice *new;
ret = spi_flash_probe_bus_cs(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
@@ -242,7 +242,7 @@ int saveenv(void)
char *saved_buffer = NULL;
int ret = 1;
env_t env_new;
-#if defined(CONFIG_DM_SPI_FLASH) || defined (CONFIG_DM_MTD_SPI_NOR)
+#ifdef CONFIG_DM_MTD_SPI_NOR
struct udevice *new;
ret = spi_flash_probe_bus_cs(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
diff --git a/drivers/Makefile b/drivers/Makefile
index 1d179b9..c3bc3c5 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -19,7 +19,6 @@ obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/
obj-$(CONFIG_SPL_SERIAL_SUPPORT) += serial/
obj-$(CONFIG_SPL_SPI_NOR_SUPPORT) += mtd/spi-nor/
-obj-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += mtd/spi/
obj-$(CONFIG_SPL_SPI_SUPPORT) += spi/
obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 2c8846b..99b821a 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -32,6 +32,4 @@ endmenu
source "drivers/mtd/nand/Kconfig"
-source "drivers/mtd/spi/Kconfig"
-
source "drivers/mtd/spi-nor/Kconfig"
diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig
deleted file mode 100644
index 3f7433c..0000000
--- a/drivers/mtd/spi/Kconfig
+++ /dev/null
@@ -1,131 +0,0 @@
-menu "SPI Flash Support"
-
-config DM_SPI_FLASH
- bool "Enable Driver Model for SPI flash"
- depends on DM && DM_SPI
- help
- Enable driver model for SPI flash. This SPI flash interface
- (spi_flash_probe(), spi_flash_write(), etc.) is then
- implemented by the SPI flash uclass. There is one standard
- SPI flash driver which knows how to probe most chips
- supported by U-Boot. The uclass interface is defined in
- include/spi_flash.h, but is currently fully compatible
- with the old interface to avoid confusion and duplication
- during the transition parent. SPI and SPI flash must be
- enabled together (it is not possible to use driver model
- for one and not the other).
-
-config SPI_FLASH_SANDBOX
- bool "Support sandbox SPI flash device"
- depends on SANDBOX && DM_SPI_FLASH
- help
- Since sandbox cannot access real devices, an emulation mechanism is
- provided instead. Drivers can be connected up to the sandbox SPI
- bus (see CONFIG_SANDBOX_SPI) and SPI traffic will be routed to this
- device. Typically the contents of the emulated SPI flash device is
- stored in a file on the host filesystem.
-
-config SPI_FLASH
- bool "Legacy SPI Flash Interface support"
- help
- Enable the legacy SPI flash support. This will include basic
- standard support for things like probing, read / write, and
- erasing through cmd_sf interface.
-
- If unsure, say N
-
-config SPI_FLASH_BAR
- bool "SPI flash Bank/Extended address register support"
- depends on SPI_FLASH
- help
- Enable the SPI flash Bank/Extended address register support.
- Bank/Extended address registers are used to access the flash
- which has size > 16MiB in 3-byte addressing.
-
-if SPI_FLASH
-
-config SPI_FLASH_ATMEL
- bool "Atmel SPI flash support"
- help
- Add support for various Atmel SPI flash chips (AT45xxx and AT25xxx)
-
-config SPI_FLASH_EON
- bool "EON SPI flash support"
- help
- Add support for various EON SPI flash chips (EN25xxx)
-
-config SPI_FLASH_GIGADEVICE
- bool "GigaDevice SPI flash support"
- help
- Add support for various GigaDevice SPI flash chips (GD25xxx)
-
-config SPI_FLASH_MACRONIX
- bool "Macronix SPI flash support"
- help
- Add support for various Macronix SPI flash chips (MX25Lxxx)
-
-config SPI_FLASH_SPANSION
- bool "Spansion SPI flash support"
- help
- Add support for various Spansion SPI flash chips (S25FLxxx)
-
-config SPI_FLASH_STMICRO
- bool "STMicro SPI flash support"
- help
- Add support for various STMicro SPI flash chips (M25Pxxx and N25Qxxx)
-
-config SPI_FLASH_SST
- bool "SST SPI flash support"
- help
- Add support for various SST SPI flash chips (SST25xxx)
-
-config SPI_FLASH_WINBOND
- bool "Winbond SPI flash support"
- help
- Add support for various Winbond SPI flash chips (W25xxx)
-
-endif
-
-config SPI_FLASH_USE_4K_SECTORS
- bool "Use small 4096 B erase sectors"
- depends on SPI_FLASH
- default y
- help
- Many flash memories support erasing small (4096 B) sectors. Depending
- on the usage this feature may provide performance gain in comparison
- to erasing whole blocks (32/64 KiB).
- Changing a small part of the flash's contents is usually faster with
- small sectors. On the other hand erasing should be faster when using
- 64 KiB block instead of 16 × 4 KiB sectors.
-
- Please note that some tools/drivers/filesystems may not work with
- 4096 B erase size (e.g. UBIFS requires 15 KiB as a minimum).
-
-config SPI_FLASH_DATAFLASH
- bool "AT45xxx DataFlash support"
- depends on SPI_FLASH && DM_SPI_FLASH
- help
- Enable the access for SPI-flash-based AT45xxx DataFlash chips.
- DataFlash is a kind of SPI flash. Most AT45 chips have two buffers
- in each chip, which may be used for double buffered I/O; but this
- driver doesn't (yet) use these for any kind of i/o overlap or prefetching.
-
- Sometimes DataFlash is packaged in MMC-format cards, although the
- MMC stack can't (yet?) distinguish between MMC and DataFlash
- protocols during enumeration.
-
- If unsure, say N
-
-config SPI_FLASH_MTD
- bool "SPI Flash MTD support"
- depends on SPI_FLASH
- help
- Enable the MTD support for spi flash layer, this adapter is for
- translating mtd_read/mtd_write commands into spi_flash_read/write
- commands. It is not intended to use it within sf_cmd or the SPI
- flash subsystem. Such an adapter is needed for subsystems like
- UBI which can only operate on top of the MTD layer.
-
- If unsure, say N
-
-endmenu # menu "SPI Flash Support"
diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile
deleted file mode 100644
index c665836..0000000
--- a/drivers/mtd/spi/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-$(CONFIG_DM_SPI_FLASH) += sf-uclass.o
-
-ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_SPL_SPI_LOAD) += spi_spl_load.o
-obj-$(CONFIG_SPL_SPI_BOOT) += fsl_espi_spl.o
-endif
-
-obj-$(CONFIG_SPI_FLASH) += sf_probe.o spi_flash.o sf_params.o sf.o
-obj-$(CONFIG_SPI_FLASH_DATAFLASH) += sf_dataflash.o
-obj-$(CONFIG_SPI_FLASH_MTD) += sf_mtd.o
-obj-$(CONFIG_SPI_FLASH_SANDBOX) += sandbox.o
diff --git a/drivers/mtd/spi/fsl_espi_spl.c b/drivers/mtd/spi/fsl_espi_spl.c
deleted file mode 100644
index b915469..0000000
--- a/drivers/mtd/spi/fsl_espi_spl.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <spi_flash.h>
-#include <malloc.h>
-
-#define ESPI_BOOT_IMAGE_SIZE 0x48
-#define ESPI_BOOT_IMAGE_ADDR 0x50
-#define CONFIG_CFG_DATA_SECTOR 0
-
-void spi_spl_load_image(uint32_t offs, unsigned int size, void *vdst)
-{
- struct spi_flash *flash;
-
- flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
- CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
- if (flash == NULL) {
- puts("\nspi_flash_probe failed");
- hang();
- }
-
- spi_flash_read(flash, offs, size, vdst);
-}
-
-/*
- * The main entry for SPI booting. It's necessary that SDRAM is already
- * configured and available since this code loads the main U-Boot image
- * from SPI into SDRAM and starts it from there.
- */
-void spi_boot(void)
-{
- void (*uboot)(void) __noreturn;
- u32 offset, code_len, copy_len = 0;
-#ifndef CONFIG_FSL_CORENET
- unsigned char *buf = NULL;
-#endif
- struct spi_flash *flash;
-
- flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
- CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
- if (flash == NULL) {
- puts("\nspi_flash_probe failed");
- hang();
- }
-
-#ifdef CONFIG_FSL_CORENET
- offset = CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS;
- code_len = CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE;
-#else
- /*
- * Load U-Boot image from SPI flash into RAM
- */
- buf = malloc(flash->page_size);
- if (buf == NULL) {
- puts("\nmalloc failed");
- hang();
- }
- memset(buf, 0, flash->page_size);
-
- spi_flash_read(flash, CONFIG_CFG_DATA_SECTOR,
- flash->page_size, (void *)buf);
- offset = *(u32 *)(buf + ESPI_BOOT_IMAGE_ADDR);
- /* Skip spl code */
- offset += CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS;
- /* Get the code size from offset 0x48 */
- code_len = *(u32 *)(buf + ESPI_BOOT_IMAGE_SIZE);
- /* Skip spl code */
- code_len = code_len - CONFIG_SPL_MAX_SIZE;
-#endif
- /* copy code to DDR */
- printf("Loading second stage boot loader ");
- while (copy_len <= code_len) {
- spi_flash_read(flash, offset + copy_len, 0x2000,
- (void *)(CONFIG_SYS_SPI_FLASH_U_BOOT_DST
- + copy_len));
- copy_len = copy_len + 0x2000;
- putc('.');
- }
-
- /*
- * Jump to U-Boot image
- */
- flush_cache(CONFIG_SYS_SPI_FLASH_U_BOOT_DST, code_len);
- uboot = (void *)CONFIG_SYS_SPI_FLASH_U_BOOT_START;
- (*uboot)();
-}
diff --git a/drivers/mtd/spi/sandbox.c b/drivers/mtd/spi/sandbox.c
deleted file mode 100644
index 895604d..0000000
--- a/drivers/mtd/spi/sandbox.c
+++ /dev/null
@@ -1,697 +0,0 @@
-/*
- * Simulate a SPI flash
- *
- * Copyright (c) 2011-2013 The Chromium OS Authors.
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <dm.h>
-#include <malloc.h>
-#include <spi.h>
-#include <os.h>
-
-#include <spi_flash.h>
-#include "sf_internal.h"
-
-#include <asm/getopt.h>
-#include <asm/spi.h>
-#include <asm/state.h>
-#include <dm/device-internal.h>
-#include <dm/lists.h>
-#include <dm/uclass-internal.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * The different states that our SPI flash transitions between.
- * We need to keep track of this across multiple xfer calls since
- * the SPI bus could possibly call down into us multiple times.
- */
-enum sandbox_sf_state {
- SF_CMD, /* default state -- we're awaiting a command */
- SF_ID, /* read the flash's (jedec) ID code */
- SF_ADDR, /* processing the offset in the flash to read/etc... */
- SF_READ, /* reading data from the flash */
- SF_WRITE, /* writing data to the flash, i.e. page programming */
- SF_ERASE, /* erase the flash */
- SF_READ_STATUS, /* read the flash's status register */
- SF_READ_STATUS1, /* read the flash's status register upper 8 bits*/
- SF_WRITE_STATUS, /* write the flash's status register */
-};
-
-static const char *sandbox_sf_state_name(enum sandbox_sf_state state)
-{
- static const char * const states[] = {
- "CMD", "ID", "ADDR", "READ", "WRITE", "ERASE", "READ_STATUS",
- "READ_STATUS1", "WRITE_STATUS",
- };
- return states[state];
-}
-
-/* Bits for the status register */
-#define STAT_WIP (1 << 0)
-#define STAT_WEL (1 << 1)
-
-/* Assume all SPI flashes have 3 byte addresses since they do atm */
-#define SF_ADDR_LEN 3
-
-#define IDCODE_LEN 3
-
-/* Used to quickly bulk erase backing store */
-static u8 sandbox_sf_0xff[0x1000];
-
-/* Internal state data for each SPI flash */
-struct sandbox_spi_flash {
- unsigned int cs; /* Chip select we are attached to */
- /*
- * As we receive data over the SPI bus, our flash transitions
- * between states. For example, we start off in the SF_CMD
- * state where the first byte tells us what operation to perform
- * (such as read or write the flash). But the operation itself
- * can go through a few states such as first reading in the
- * offset in the flash to perform the requested operation.
- * Thus "state" stores the exact state that our machine is in
- * while "cmd" stores the overall command we're processing.
- */
- enum sandbox_sf_state state;
- uint cmd;
- /* Erase size of current erase command */
- uint erase_size;
- /* Current position in the flash; used when reading/writing/etc... */
- uint off;
- /* How many address bytes we've consumed */
- uint addr_bytes, pad_addr_bytes;
- /* The current flash status (see STAT_XXX defines above) */
- u16 status;
- /* Data describing the flash we're emulating */
- const struct spi_flash_params *data;
- /* The file on disk to serv up data from */
- int fd;
-};
-
-struct sandbox_spi_flash_plat_data {
- const char *filename;
- const char *device_name;
- int bus;
- int cs;
-};
-
-/**
- * This is a very strange probe function. If it has platform data (which may
- * have come from the device tree) then this function gets the filename and
- * device type from there. Failing that it looks at the command line
- * parameter.
- */
-static int sandbox_sf_probe(struct udevice *dev)
-{
- /* spec = idcode:file */
- struct sandbox_spi_flash *sbsf = dev_get_priv(dev);
- const char *file;
- size_t len, idname_len;
- const struct spi_flash_params *data;
- struct sandbox_spi_flash_plat_data *pdata = dev_get_platdata(dev);
- struct sandbox_state *state = state_get_current();
- struct udevice *bus = dev->parent;
- const char *spec = NULL;
- int ret = 0;
- int cs = -1;
- int i;
-
- debug("%s: bus %d, looking for emul=%p: ", __func__, bus->seq, dev);
- if (bus->seq >= 0 && bus->seq < CONFIG_SANDBOX_SPI_MAX_BUS) {
- for (i = 0; i < CONFIG_SANDBOX_SPI_MAX_CS; i++) {
- if (state->spi[bus->seq][i].emul == dev)
- cs = i;
- }
- }
- if (cs == -1) {
- printf("Error: Unknown chip select for device '%s'\n",
- dev->name);
- return -EINVAL;
- }
- debug("found at cs %d\n", cs);
-
- if (!pdata->filename) {
- struct sandbox_state *state = state_get_current();
-
- assert(bus->seq != -1);
- if (bus->seq < CONFIG_SANDBOX_SPI_MAX_BUS)
- spec = state->spi[bus->seq][cs].spec;
- if (!spec) {
- ret = -ENOENT;
- goto error;
- }
-
- file = strchr(spec, ':');
- if (!file) {
- printf("sandbox_sf: unable to parse file\n");
- ret = -EINVAL;
- goto error;
- }
- idname_len = file - spec;
- pdata->filename = file + 1;
- pdata->device_name = spec;
- ++file;
- } else {
- spec = strchr(pdata->device_name, ',');
- if (spec)
- spec++;
- else
- spec = pdata->device_name;
- idname_len = strlen(spec);
- }
- debug("%s: device='%s'\n", __func__, spec);
-
- for (data = spi_flash_params_table; data->name; data++) {
- len = strlen(data->name);
- if (idname_len != len)
- continue;
- if (!strncasecmp(spec, data->name, len))
- break;
- }
- if (!data->name) {
- printf("sandbox_sf: unknown flash '%*s'\n", (int)idname_len,
- spec);
- ret = -EINVAL;
- goto error;
- }
-
- if (sandbox_sf_0xff[0] == 0x00)
- memset(sandbox_sf_0xff, 0xff, sizeof(sandbox_sf_0xff));
-
- sbsf->fd = os_open(pdata->filename, 02);
- if (sbsf->fd == -1) {
- free(sbsf);
- printf("sandbox_sf: unable to open file '%s'\n",
- pdata->filename);
- ret = -EIO;
- goto error;
- }
-
- sbsf->data = data;
- sbsf->cs = cs;
-
- return 0;
-
- error:
- debug("%s: Got error %d\n", __func__, ret);
- return ret;
-}
-
-static int sandbox_sf_remove(struct udevice *dev)
-{
- struct sandbox_spi_flash *sbsf = dev_get_priv(dev);
-
- os_close(sbsf->fd);
-
- return 0;
-}
-
-static void sandbox_sf_cs_activate(struct udevice *dev)
-{
- struct sandbox_spi_flash *sbsf = dev_get_priv(dev);
-
- debug("sandbox_sf: CS activated; state is fresh!\n");
-
- /* CS is asserted, so reset state */
- sbsf->off = 0;
- sbsf->addr_bytes = 0;
- sbsf->pad_addr_bytes = 0;
- sbsf->state = SF_CMD;
- sbsf->cmd = SF_CMD;
-}
-
-static void sandbox_sf_cs_deactivate(struct udevice *dev)
-{
- debug("sandbox_sf: CS deactivated; cmd done processing!\n");
-}
-
-/*
- * There are times when the data lines are allowed to tristate. What
- * is actually sensed on the line depends on the hardware. It could
- * always be 0xFF/0x00 (if there are pull ups/downs), or things could
- * float and so we'd get garbage back. This func encapsulates that
- * scenario so we can worry about the details here.
- */
-static void sandbox_spi_tristate(u8 *buf, uint len)
-{
- /* XXX: make this into a user config option ? */
- memset(buf, 0xff, len);
-}
-
-/* Figure out what command this stream is telling us to do */
-static int sandbox_sf_process_cmd(struct sandbox_spi_flash *sbsf, const u8 *rx,
- u8 *tx)
-{
- enum sandbox_sf_state oldstate = sbsf->state;
-
- /* We need to output a byte for the cmd byte we just ate */
- if (tx)
- sandbox_spi_tristate(tx, 1);
-
- sbsf->cmd = rx[0];
- switch (sbsf->cmd) {
- case CMD_READ_ID:
- sbsf->state = SF_ID;
- sbsf->cmd = SF_ID;
- break;
- case CMD_READ_ARRAY_FAST:
- sbsf->pad_addr_bytes = 1;
- case CMD_READ_ARRAY_SLOW:
- case CMD_PAGE_PROGRAM:
- sbsf->state = SF_ADDR;
- break;
- case CMD_WRITE_DISABLE:
- debug(" write disabled\n");
- sbsf->status &= ~STAT_WEL;
- break;
- case CMD_READ_STATUS:
- sbsf->state = SF_READ_STATUS;
- break;
- case CMD_READ_STATUS1:
- sbsf->state = SF_READ_STATUS1;
- break;
- case CMD_WRITE_ENABLE:
- debug(" write enabled\n");
- sbsf->status |= STAT_WEL;
- break;
- case CMD_WRITE_STATUS:
- sbsf->state = SF_WRITE_STATUS;
- break;
- default: {
- int flags = sbsf->data->flags;
-
- /* we only support erase here */
- if (sbsf->cmd == CMD_ERASE_CHIP) {
- sbsf->erase_size = sbsf->data->sector_size *
- sbsf->data->nr_sectors;
- } else if (sbsf->cmd == CMD_ERASE_4K && (flags & SECT_4K)) {
- sbsf->erase_size = 4 << 10;
- } else if (sbsf->cmd == CMD_ERASE_32K && (flags & SECT_32K)) {
- sbsf->erase_size = 32 << 10;
- } else if (sbsf->cmd == CMD_ERASE_64K &&
- !(flags & (SECT_4K | SECT_32K))) {
- sbsf->erase_size = 64 << 10;
- } else {
- debug(" cmd unknown: %#x\n", sbsf->cmd);
- return -EIO;
- }
- sbsf->state = SF_ADDR;
- break;
- }
- }
-
- if (oldstate != sbsf->state)
- debug(" cmd: transition to %s state\n",
- sandbox_sf_state_name(sbsf->state));
-
- return 0;
-}
-
-int sandbox_erase_part(struct sandbox_spi_flash *sbsf, int size)
-{
- int todo;
- int ret;
-
- while (size > 0) {
- todo = min(size, (int)sizeof(sandbox_sf_0xff));
- ret = os_write(sbsf->fd, sandbox_sf_0xff, todo);
- if (ret != todo)
- return ret;
- size -= todo;
- }
-
- return 0;
-}
-
-static int sandbox_sf_xfer(struct udevice *dev, unsigned int bitlen,
- const void *rxp, void *txp, unsigned long flags)
-{
- struct sandbox_spi_flash *sbsf = dev_get_priv(dev);
- const uint8_t *rx = rxp;
- uint8_t *tx = txp;
- uint cnt, pos = 0;
- int bytes = bitlen / 8;
- int ret;
-
- debug("sandbox_sf: state:%x(%s) bytes:%u\n", sbsf->state,
- sandbox_sf_state_name(sbsf->state), bytes);
-
- if ((flags & SPI_XFER_BEGIN))
- sandbox_sf_cs_activate(dev);
-
- if (sbsf->state == SF_CMD) {
- /* Figure out the initial state */
- ret = sandbox_sf_process_cmd(sbsf, rx, tx);
- if (ret)
- return ret;
- ++pos;
- }
-
- /* Process the remaining data */
- while (pos < bytes) {
- switch (sbsf->state) {
- case SF_ID: {
- u8 id;
-
- debug(" id: off:%u tx:", sbsf->off);
- if (sbsf->off < IDCODE_LEN) {
- /* Extract correct byte from ID 0x00aabbcc */
- id = sbsf->data->jedec >>
- (8 * (IDCODE_LEN - 1 - sbsf->off));
- } else {
- id = 0;
- }
- debug("%d %02x\n", sbsf->off, id);
- tx[pos++] = id;
- ++sbsf->off;
- break;
- }
- case SF_ADDR:
- debug(" addr: bytes:%u rx:%02x ", sbsf->addr_bytes,
- rx[pos]);
-
- if (sbsf->addr_bytes++ < SF_ADDR_LEN)
- sbsf->off = (sbsf->off << 8) | rx[pos];
- debug("addr:%06x\n", sbsf->off);
-
- if (tx)
- sandbox_spi_tristate(&tx[pos], 1);
- pos++;
-
- /* See if we're done processing */
- if (sbsf->addr_bytes <
- SF_ADDR_LEN + sbsf->pad_addr_bytes)
- break;
-
- /* Next state! */
- if (os_lseek(sbsf->fd, sbsf->off, OS_SEEK_SET) < 0) {
- puts("sandbox_sf: os_lseek() failed");
- return -EIO;
- }
- switch (sbsf->cmd) {
- case CMD_READ_ARRAY_FAST:
- case CMD_READ_ARRAY_SLOW:
- sbsf->state = SF_READ;
- break;
- case CMD_PAGE_PROGRAM:
- sbsf->state = SF_WRITE;
- break;
- default:
- /* assume erase state ... */
- sbsf->state = SF_ERASE;
- goto case_sf_erase;
- }
- debug(" cmd: transition to %s state\n",
- sandbox_sf_state_name(sbsf->state));
- break;
- case SF_READ:
- /*
- * XXX: need to handle exotic behavior:
- * - reading past end of device
- */
-
- cnt = bytes - pos;
- debug(" tx: read(%u)\n", cnt);
- assert(tx);
- ret = os_read(sbsf->fd, tx + pos, cnt);
- if (ret < 0) {
- puts("sandbox_sf: os_read() failed\n");
- return -EIO;
- }
- pos += ret;
- break;
- case SF_READ_STATUS:
- debug(" read status: %#x\n", sbsf->status);
- cnt = bytes - pos;
- memset(tx + pos, sbsf->status, cnt);
- pos += cnt;
- break;
- case SF_READ_STATUS1:
- debug(" read status: %#x\n", sbsf->status);
- cnt = bytes - pos;
- memset(tx + pos, sbsf->status >> 8, cnt);
- pos += cnt;
- break;
- case SF_WRITE_STATUS:
- debug(" write status: %#x (ignored)\n", rx[pos]);
- pos = bytes;
- break;
- case SF_WRITE:
- /*
- * XXX: need to handle exotic behavior:
- * - unaligned addresses
- * - more than a page (256) worth of data
- * - reading past end of device
- */
- if (!(sbsf->status & STAT_WEL)) {
- puts("sandbox_sf: write enable not set before write\n");
- goto done;
- }
-
- cnt = bytes - pos;
- debug(" rx: write(%u)\n", cnt);
- if (tx)
- sandbox_spi_tristate(&tx[pos], cnt);
- ret = os_write(sbsf->fd, rx + pos, cnt);
- if (ret < 0) {
- puts("sandbox_spi: os_write() failed\n");
- return -EIO;
- }
- pos += ret;
- sbsf->status &= ~STAT_WEL;
- break;
- case SF_ERASE:
- case_sf_erase: {
- if (!(sbsf->status & STAT_WEL)) {
- puts("sandbox_sf: write enable not set before erase\n");
- goto done;
- }
-
- /* verify address is aligned */
- if (sbsf->off & (sbsf->erase_size - 1)) {
- debug(" sector erase: cmd:%#x needs align:%#x, but we got %#x\n",
- sbsf->cmd, sbsf->erase_size,
- sbsf->off);
- sbsf->status &= ~STAT_WEL;
- goto done;
- }
-
- debug(" sector erase addr: %u, size: %u\n", sbsf->off,
- sbsf->erase_size);
-
- cnt = bytes - pos;
- if (tx)
- sandbox_spi_tristate(&tx[pos], cnt);
- pos += cnt;
-
- /*
- * TODO(vapier at gentoo.org): latch WIP in status, and
- * delay before clearing it ?
- */
- ret = sandbox_erase_part(sbsf, sbsf->erase_size);
- sbsf->status &= ~STAT_WEL;
- if (ret) {
- debug("sandbox_sf: Erase failed\n");
- goto done;
- }
- goto done;
- }
- default:
- debug(" ??? no idea what to do ???\n");
- goto done;
- }
- }
-
- done:
- if (flags & SPI_XFER_END)
- sandbox_sf_cs_deactivate(dev);
- return pos == bytes ? 0 : -EIO;
-}
-
-int sandbox_sf_ofdata_to_platdata(struct udevice *dev)
-{
- struct sandbox_spi_flash_plat_data *pdata = dev_get_platdata(dev);
- const void *blob = gd->fdt_blob;
- int node = dev->of_offset;
-
- pdata->filename = fdt_getprop(blob, node, "sandbox,filename", NULL);
- pdata->device_name = fdt_getprop(blob, node, "compatible", NULL);
- if (!pdata->filename || !pdata->device_name) {
- debug("%s: Missing properties, filename=%s, device_name=%s\n",
- __func__, pdata->filename, pdata->device_name);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static const struct dm_spi_emul_ops sandbox_sf_emul_ops = {
- .xfer = sandbox_sf_xfer,
-};
-
-#ifdef CONFIG_SPI_FLASH
-static int sandbox_cmdline_cb_spi_sf(struct sandbox_state *state,
- const char *arg)
-{
- unsigned long bus, cs;
- const char *spec = sandbox_spi_parse_spec(arg, &bus, &cs);
-
- if (!spec)
- return 1;
-
- /*
- * It is safe to not make a copy of 'spec' because it comes from the
- * command line.
- *
- * TODO(sjg at chromium.org): It would be nice if we could parse the
- * spec here, but the problem is that no U-Boot init has been done
- * yet. Perhaps we can figure something out.
- */
- state->spi[bus][cs].spec = spec;
- return 0;
-}
-SANDBOX_CMDLINE_OPT(spi_sf, 1, "connect a SPI flash: <bus>:<cs>:<id>:<file>");
-
-int sandbox_sf_bind_emul(struct sandbox_state *state, int busnum, int cs,
- struct udevice *bus, int of_offset, const char *spec)
-{
- struct udevice *emul;
- char name[20], *str;
- struct driver *drv;
- int ret;
-
- /* now the emulator */
- strncpy(name, spec, sizeof(name) - 6);
- name[sizeof(name) - 6] = '\0';
- strcat(name, "-emul");
- str = strdup(name);
- if (!str)
- return -ENOMEM;
- drv = lists_driver_lookup_name("sandbox_sf_emul");
- if (!drv) {
- puts("Cannot find sandbox_sf_emul driver\n");
- return -ENOENT;
- }
- ret = device_bind(bus, drv, str, NULL, of_offset, &emul);
- if (ret) {
- printf("Cannot create emul device for spec '%s' (err=%d)\n",
- spec, ret);
- return ret;
- }
- state->spi[busnum][cs].emul = emul;
-
- return 0;
-}
-
-void sandbox_sf_unbind_emul(struct sandbox_state *state, int busnum, int cs)
-{
- struct udevice *dev;
-
- dev = state->spi[busnum][cs].emul;
- device_remove(dev);
- device_unbind(dev);
- state->spi[busnum][cs].emul = NULL;
-}
-
-static int sandbox_sf_bind_bus_cs(struct sandbox_state *state, int busnum,
- int cs, const char *spec)
-{
- struct udevice *bus, *slave;
- int ret;
-
- ret = uclass_find_device_by_seq(UCLASS_SPI, busnum, true, &bus);
- if (ret) {
- printf("Invalid bus %d for spec '%s' (err=%d)\n", busnum,
- spec, ret);
- return ret;
- }
- ret = spi_find_chip_select(bus, cs, &slave);
- if (!ret) {
- printf("Chip select %d already exists for spec '%s'\n", cs,
- spec);
- return -EEXIST;
- }
-
- ret = device_bind_driver(bus, "spi_flash_std", spec, &slave);
- if (ret)
- return ret;
-
- return sandbox_sf_bind_emul(state, busnum, cs, bus, -1, spec);
-}
-
-int sandbox_spi_get_emul(struct sandbox_state *state,
- struct udevice *bus, struct udevice *slave,
- struct udevice **emulp)
-{
- struct sandbox_spi_info *info;
- int busnum = bus->seq;
- int cs = spi_chip_select(slave);
- int ret;
-
- info = &state->spi[busnum][cs];
- if (!info->emul) {
- /* Use the same device tree node as the SPI flash device */
- debug("%s: busnum=%u, cs=%u: binding SPI flash emulation: ",
- __func__, busnum, cs);
- ret = sandbox_sf_bind_emul(state, busnum, cs, bus,
- slave->of_offset, slave->name);
- if (ret) {
- debug("failed (err=%d)\n", ret);
- return ret;
- }
- debug("OK\n");
- }
- *emulp = info->emul;
-
- return 0;
-}
-
-int dm_scan_other(bool pre_reloc_only)
-{
- struct sandbox_state *state = state_get_current();
- int busnum, cs;
-
- if (pre_reloc_only)
- return 0;
- for (busnum = 0; busnum < CONFIG_SANDBOX_SPI_MAX_BUS; busnum++) {
- for (cs = 0; cs < CONFIG_SANDBOX_SPI_MAX_CS; cs++) {
- const char *spec = state->spi[busnum][cs].spec;
- int ret;
-
- if (spec) {
- ret = sandbox_sf_bind_bus_cs(state, busnum,
- cs, spec);
- if (ret) {
- debug("%s: Bind failed for bus %d, cs %d\n",
- __func__, busnum, cs);
- return ret;
- }
- }
- }
- }
-
- return 0;
-}
-#endif
-
-static const struct udevice_id sandbox_sf_ids[] = {
- { .compatible = "sandbox,spi-flash" },
- { }
-};
-
-U_BOOT_DRIVER(sandbox_sf_emul) = {
- .name = "sandbox_sf_emul",
- .id = UCLASS_SPI_EMUL,
- .of_match = sandbox_sf_ids,
- .ofdata_to_platdata = sandbox_sf_ofdata_to_platdata,
- .probe = sandbox_sf_probe,
- .remove = sandbox_sf_remove,
- .priv_auto_alloc_size = sizeof(struct sandbox_spi_flash),
- .platdata_auto_alloc_size = sizeof(struct sandbox_spi_flash_plat_data),
- .ops = &sandbox_sf_emul_ops,
-};
diff --git a/drivers/mtd/spi/sf-uclass.c b/drivers/mtd/spi/sf-uclass.c
deleted file mode 100644
index 19de964..0000000
--- a/drivers/mtd/spi/sf-uclass.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Copyright (c) 2014 Google, Inc
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <dm.h>
-#include <spi.h>
-#include <spi_flash.h>
-#include <dm/device-internal.h>
-#include "sf_internal.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int spi_flash_read_dm(struct udevice *dev, u32 offset, size_t len, void *buf)
-{
- return sf_get_ops(dev)->read(dev, offset, len, buf);
-}
-
-int spi_flash_write_dm(struct udevice *dev, u32 offset, size_t len,
- const void *buf)
-{
- return sf_get_ops(dev)->write(dev, offset, len, buf);
-}
-
-int spi_flash_erase_dm(struct udevice *dev, u32 offset, size_t len)
-{
- return sf_get_ops(dev)->erase(dev, offset, len);
-}
-
-/*
- * TODO(sjg at chromium.org): This is an old-style function. We should remove
- * it when all SPI flash drivers use dm
- */
-struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int spi_mode)
-{
- struct udevice *dev;
-
- if (spi_flash_probe_bus_cs(bus, cs, max_hz, spi_mode, &dev))
- return NULL;
-
- return dev_get_uclass_priv(dev);
-}
-
-void spi_flash_free(struct spi_flash *flash)
-{
- device_remove(flash->spi->dev);
-}
-
-int spi_flash_probe_bus_cs(unsigned int busnum, unsigned int cs,
- unsigned int max_hz, unsigned int spi_mode,
- struct udevice **devp)
-{
- struct spi_slave *slave;
- struct udevice *bus;
- char *str;
- int ret;
-
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_USE_TINY_PRINTF)
- str = "spi_flash";
-#else
- char name[30];
-
- snprintf(name, sizeof(name), "spi_flash@%d:%d", busnum, cs);
- str = strdup(name);
-#endif
- ret = spi_get_bus_and_cs(busnum, cs, max_hz, spi_mode,
- "spi_flash_std", str, &bus, &slave);
- if (ret)
- return ret;
-
- *devp = slave->dev;
- return 0;
-}
-
-static int spi_flash_post_bind(struct udevice *dev)
-{
-#if defined(CONFIG_NEEDS_MANUAL_RELOC)
- struct dm_spi_flash_ops *ops = sf_get_ops(dev);
- static int reloc_done;
-
- if (!reloc_done) {
- if (ops->read)
- ops->read += gd->reloc_off;
- if (ops->write)
- ops->write += gd->reloc_off;
- if (ops->erase)
- ops->erase += gd->reloc_off;
-
- reloc_done++;
- }
-#endif
- return 0;
-}
-
-UCLASS_DRIVER(spi_flash) = {
- .id = UCLASS_SPI_FLASH,
- .name = "spi_flash",
- .post_bind = spi_flash_post_bind,
- .per_device_auto_alloc_size = sizeof(struct spi_flash),
-};
diff --git a/drivers/mtd/spi/sf.c b/drivers/mtd/spi/sf.c
deleted file mode 100644
index 664e860..0000000
--- a/drivers/mtd/spi/sf.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * SPI flash interface
- *
- * Copyright (C) 2008 Atmel Corporation
- * Copyright (C) 2010 Reinhard Meyer, EMK Elektronik
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <spi.h>
-
-static int spi_flash_read_write(struct spi_slave *spi,
- const u8 *cmd, size_t cmd_len,
- const u8 *data_out, u8 *data_in,
- size_t data_len)
-{
- unsigned long flags = SPI_XFER_BEGIN;
- int ret;
-
-#ifdef CONFIG_SF_DUAL_FLASH
- if (spi->flags & SPI_XFER_U_PAGE)
- flags |= SPI_XFER_U_PAGE;
-#endif
- if (data_len == 0)
- flags |= SPI_XFER_END;
-
- ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags);
- if (ret) {
- debug("SF: Failed to send command (%zu bytes): %d\n",
- cmd_len, ret);
- } else if (data_len != 0) {
- ret = spi_xfer(spi, data_len * 8, data_out, data_in,
- SPI_XFER_END);
- if (ret)
- debug("SF: Failed to transfer %zu bytes of data: %d\n",
- data_len, ret);
- }
-
- return ret;
-}
-
-int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd,
- size_t cmd_len, void *data, size_t data_len)
-{
- return spi_flash_read_write(spi, cmd, cmd_len, NULL, data, data_len);
-}
-
-int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len)
-{
- return spi_flash_cmd_read(spi, &cmd, 1, response, len);
-}
-
-int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
- const void *data, size_t data_len)
-{
- return spi_flash_read_write(spi, cmd, cmd_len, data, NULL, data_len);
-}
diff --git a/drivers/mtd/spi/sf_dataflash.c b/drivers/mtd/spi/sf_dataflash.c
deleted file mode 100644
index 0f66b99..0000000
--- a/drivers/mtd/spi/sf_dataflash.c
+++ /dev/null
@@ -1,701 +0,0 @@
-/*
- *
- * Atmel DataFlash probing
- *
- * Copyright (C) 2004-2009, 2015 Freescale Semiconductor, Inc.
- * Haikun Wang (haikun.wang at freescale.com)
- *
- * SPDX-License-Identifier: GPL-2.0+
-*/
-#include <common.h>
-#include <dm.h>
-#include <errno.h>
-#include <fdtdec.h>
-#include <spi.h>
-#include <spi_flash.h>
-#include <div64.h>
-#include <linux/err.h>
-#include <linux/math64.h>
-
-#include "sf_internal.h"
-
-/* reads can bypass the buffers */
-#define OP_READ_CONTINUOUS 0xE8
-#define OP_READ_PAGE 0xD2
-
-/* group B requests can run even while status reports "busy" */
-#define OP_READ_STATUS 0xD7 /* group B */
-
-/* move data between host and buffer */
-#define OP_READ_BUFFER1 0xD4 /* group B */
-#define OP_READ_BUFFER2 0xD6 /* group B */
-#define OP_WRITE_BUFFER1 0x84 /* group B */
-#define OP_WRITE_BUFFER2 0x87 /* group B */
-
-/* erasing flash */
-#define OP_ERASE_PAGE 0x81
-#define OP_ERASE_BLOCK 0x50
-
-/* move data between buffer and flash */
-#define OP_TRANSFER_BUF1 0x53
-#define OP_TRANSFER_BUF2 0x55
-#define OP_MREAD_BUFFER1 0xD4
-#define OP_MREAD_BUFFER2 0xD6
-#define OP_MWERASE_BUFFER1 0x83
-#define OP_MWERASE_BUFFER2 0x86
-#define OP_MWRITE_BUFFER1 0x88 /* sector must be pre-erased */
-#define OP_MWRITE_BUFFER2 0x89 /* sector must be pre-erased */
-
-/* write to buffer, then write-erase to flash */
-#define OP_PROGRAM_VIA_BUF1 0x82
-#define OP_PROGRAM_VIA_BUF2 0x85
-
-/* compare buffer to flash */
-#define OP_COMPARE_BUF1 0x60
-#define OP_COMPARE_BUF2 0x61
-
-/* read flash to buffer, then write-erase to flash */
-#define OP_REWRITE_VIA_BUF1 0x58
-#define OP_REWRITE_VIA_BUF2 0x59
-
-/*
- * newer chips report JEDEC manufacturer and device IDs; chip
- * serial number and OTP bits; and per-sector writeprotect.
- */
-#define OP_READ_ID 0x9F
-#define OP_READ_SECURITY 0x77
-#define OP_WRITE_SECURITY_REVC 0x9A
-#define OP_WRITE_SECURITY 0x9B /* revision D */
-
-
-struct dataflash {
- uint8_t command[16];
- unsigned short page_offset; /* offset in flash address */
-};
-
-/*
- * Return the status of the DataFlash device.
- */
-static inline int dataflash_status(struct spi_slave *spi)
-{
- int ret;
- u8 status;
- /*
- * NOTE: at45db321c over 25 MHz wants to write
- * a dummy byte after the opcode...
- */
- ret = spi_flash_cmd(spi, OP_READ_STATUS, &status, 1);
- return ret ? -EIO : status;
-}
-
-/*
- * Poll the DataFlash device until it is READY.
- * This usually takes 5-20 msec or so; more for sector erase.
- * ready: return > 0
- */
-static int dataflash_waitready(struct spi_slave *spi)
-{
- int status;
- int timeout = 2 * CONFIG_SYS_HZ;
- int timebase;
-
- timebase = get_timer(0);
- do {
- status = dataflash_status(spi);
- if (status < 0)
- status = 0;
-
- if (status & (1 << 7)) /* RDY/nBSY */
- return status;
-
- mdelay(3);
- } while (get_timer(timebase) < timeout);
-
- return -ETIME;
-}
-
-/*
- * Erase pages of flash.
- */
-static int spi_dataflash_erase(struct udevice *dev, u32 offset, size_t len)
-{
- struct dataflash *dataflash;
- struct spi_flash *spi_flash;
- struct spi_slave *spi;
- unsigned blocksize;
- uint8_t *command;
- uint32_t rem;
- int status;
-
- dataflash = dev_get_priv(dev);
- spi_flash = dev_get_uclass_priv(dev);
- spi = spi_flash->spi;
-
- blocksize = spi_flash->page_size << 3;
-
- memset(dataflash->command, 0 , sizeof(dataflash->command));
- command = dataflash->command;
-
- debug("%s: erase addr=0x%x len 0x%x\n", dev->name, offset, len);
-
- div_u64_rem(len, spi_flash->page_size, &rem);
- if (rem)
- return -EINVAL;
- div_u64_rem(offset, spi_flash->page_size, &rem);
- if (rem)
- return -EINVAL;
-
- status = spi_claim_bus(spi);
- if (status) {
- debug("SPI DATAFLASH: unable to claim SPI bus\n");
- return status;
- }
-
- while (len > 0) {
- unsigned int pageaddr;
- int do_block;
- /*
- * Calculate flash page address; use block erase (for speed) if
- * we're at a block boundary and need to erase the whole block.
- */
- pageaddr = div_u64(offset, spi_flash->page_size);
- do_block = (pageaddr & 0x7) == 0 && len >= blocksize;
- pageaddr = pageaddr << dataflash->page_offset;
-
- command[0] = do_block ? OP_ERASE_BLOCK : OP_ERASE_PAGE;
- command[1] = (uint8_t)(pageaddr >> 16);
- command[2] = (uint8_t)(pageaddr >> 8);
- command[3] = 0;
-
- debug("%s ERASE %s: (%x) %x %x %x [%d]\n",
- dev->name, do_block ? "block" : "page",
- command[0], command[1], command[2], command[3],
- pageaddr);
-
- status = spi_flash_cmd_write(spi, command, 4, NULL, 0);
- if (status < 0) {
- debug("%s: erase send command error!\n", dev->name);
- return -EIO;
- }
-
- status = dataflash_waitready(spi);
- if (status < 0) {
- debug("%s: erase waitready error!\n", dev->name);
- return status;
- }
-
- if (do_block) {
- offset += blocksize;
- len -= blocksize;
- } else {
- offset += spi_flash->page_size;
- len -= spi_flash->page_size;
- }
- }
-
- spi_release_bus(spi);
-
- return 0;
-}
-
-/*
- * Read from the DataFlash device.
- * offset : Start offset in flash device
- * len : Amount to read
- * buf : Buffer containing the data
- */
-static int spi_dataflash_read(struct udevice *dev, u32 offset, size_t len,
- void *buf)
-{
- struct dataflash *dataflash;
- struct spi_flash *spi_flash;
- struct spi_slave *spi;
- unsigned int addr;
- uint8_t *command;
- int status;
-
- dataflash = dev_get_priv(dev);
- spi_flash = dev_get_uclass_priv(dev);
- spi = spi_flash->spi;
-
- memset(dataflash->command, 0 , sizeof(dataflash->command));
- command = dataflash->command;
-
- debug("%s: erase addr=0x%x len 0x%x\n", dev->name, offset, len);
- debug("READ: (%x) %x %x %x\n",
- command[0], command[1], command[2], command[3]);
-
- /* Calculate flash page/byte address */
- addr = (((unsigned)offset / spi_flash->page_size)
- << dataflash->page_offset)
- + ((unsigned)offset % spi_flash->page_size);
-
- status = spi_claim_bus(spi);
- if (status) {
- debug("SPI DATAFLASH: unable to claim SPI bus\n");
- return status;
- }
-
- /*
- * Continuous read, max clock = f(car) which may be less than
- * the peak rate available. Some chips support commands with
- * fewer "don't care" bytes. Both buffers stay unchanged.
- */
- command[0] = OP_READ_CONTINUOUS;
- command[1] = (uint8_t)(addr >> 16);
- command[2] = (uint8_t)(addr >> 8);
- command[3] = (uint8_t)(addr >> 0);
-
- /* plus 4 "don't care" bytes, command len: 4 + 4 "don't care" bytes */
- status = spi_flash_cmd_read(spi, command, 8, buf, len);
-
- spi_release_bus(spi);
-
- return status;
-}
-
-/*
- * Write to the DataFlash device.
- * offset : Start offset in flash device
- * len : Amount to write
- * buf : Buffer containing the data
- */
-int spi_dataflash_write(struct udevice *dev, u32 offset, size_t len,
- const void *buf)
-{
- struct dataflash *dataflash;
- struct spi_flash *spi_flash;
- struct spi_slave *spi;
- uint8_t *command;
- unsigned int pageaddr, addr, to, writelen;
- size_t remaining = len;
- u_char *writebuf = (u_char *)buf;
- int status = -EINVAL;
-
- dataflash = dev_get_priv(dev);
- spi_flash = dev_get_uclass_priv(dev);
- spi = spi_flash->spi;
-
- memset(dataflash->command, 0 , sizeof(dataflash->command));
- command = dataflash->command;
-
- debug("%s: write 0x%x..0x%x\n", dev->name, offset, (offset + len));
-
- pageaddr = ((unsigned)offset / spi_flash->page_size);
- to = ((unsigned)offset % spi_flash->page_size);
- if (to + len > spi_flash->page_size)
- writelen = spi_flash->page_size - to;
- else
- writelen = len;
-
- status = spi_claim_bus(spi);
- if (status) {
- debug("SPI DATAFLASH: unable to claim SPI bus\n");
- return status;
- }
-
- while (remaining > 0) {
- debug("write @ %d:%d len=%d\n", pageaddr, to, writelen);
-
- /*
- * REVISIT:
- * (a) each page in a sector must be rewritten at least
- * once every 10K sibling erase/program operations.
- * (b) for pages that are already erased, we could
- * use WRITE+MWRITE not PROGRAM for ~30% speedup.
- * (c) WRITE to buffer could be done while waiting for
- * a previous MWRITE/MWERASE to complete ...
- * (d) error handling here seems to be mostly missing.
- *
- * Two persistent bits per page, plus a per-sector counter,
- * could support (a) and (b) ... we might consider using
- * the second half of sector zero, which is just one block,
- * to track that state. (On AT91, that sector should also
- * support boot-from-DataFlash.)
- */
-
- addr = pageaddr << dataflash->page_offset;
-
- /* (1) Maybe transfer partial page to Buffer1 */
- if (writelen != spi_flash->page_size) {
- command[0] = OP_TRANSFER_BUF1;
- command[1] = (addr & 0x00FF0000) >> 16;
- command[2] = (addr & 0x0000FF00) >> 8;
- command[3] = 0;
-
- debug("TRANSFER: (%x) %x %x %x\n",
- command[0], command[1], command[2], command[3]);
-
- status = spi_flash_cmd_write(spi, command, 4, NULL, 0);
- if (status < 0) {
- debug("%s: write(<pagesize) command error!\n",
- dev->name);
- return -EIO;
- }
-
- status = dataflash_waitready(spi);
- if (status < 0) {
- debug("%s: write(<pagesize) waitready error!\n",
- dev->name);
- return status;
- }
- }
-
- /* (2) Program full page via Buffer1 */
- addr += to;
- command[0] = OP_PROGRAM_VIA_BUF1;
- command[1] = (addr & 0x00FF0000) >> 16;
- command[2] = (addr & 0x0000FF00) >> 8;
- command[3] = (addr & 0x000000FF);
-
- debug("PROGRAM: (%x) %x %x %x\n",
- command[0], command[1], command[2], command[3]);
-
- status = spi_flash_cmd_write(spi, command,
- 4, writebuf, writelen);
- if (status < 0) {
- debug("%s: write send command error!\n", dev->name);
- return -EIO;
- }
-
- status = dataflash_waitready(spi);
- if (status < 0) {
- debug("%s: write waitready error!\n", dev->name);
- return status;
- }
-
-#ifdef CONFIG_SPI_DATAFLASH_WRITE_VERIFY
- /* (3) Compare to Buffer1 */
- addr = pageaddr << dataflash->page_offset;
- command[0] = OP_COMPARE_BUF1;
- command[1] = (addr & 0x00FF0000) >> 16;
- command[2] = (addr & 0x0000FF00) >> 8;
- command[3] = 0;
-
- debug("COMPARE: (%x) %x %x %x\n",
- command[0], command[1], command[2], command[3]);
-
- status = spi_flash_cmd_write(spi, command,
- 4, writebuf, writelen);
- if (status < 0) {
- debug("%s: write(compare) send command error!\n",
- dev->name);
- return -EIO;
- }
-
- status = dataflash_waitready(spi);
-
- /* Check result of the compare operation */
- if (status & (1 << 6)) {
- printf("SPI DataFlash: write compare page %u, err %d\n",
- pageaddr, status);
- remaining = 0;
- status = -EIO;
- break;
- } else {
- status = 0;
- }
-
-#endif /* CONFIG_SPI_DATAFLASH_WRITE_VERIFY */
- remaining = remaining - writelen;
- pageaddr++;
- to = 0;
- writebuf += writelen;
-
- if (remaining > spi_flash->page_size)
- writelen = spi_flash->page_size;
- else
- writelen = remaining;
- }
-
- spi_release_bus(spi);
-
- return 0;
-}
-
-static int add_dataflash(struct udevice *dev, char *name, int nr_pages,
- int pagesize, int pageoffset, char revision)
-{
- struct spi_flash *spi_flash;
- struct dataflash *dataflash;
-
- dataflash = dev_get_priv(dev);
- spi_flash = dev_get_uclass_priv(dev);
-
- dataflash->page_offset = pageoffset;
-
- spi_flash->name = name;
- spi_flash->page_size = pagesize;
- spi_flash->size = nr_pages * pagesize;
- spi_flash->erasesize = pagesize;
-
-#ifndef CONFIG_SPL_BUILD
- printf("SPI DataFlash: Detected %s with page size ", spi_flash->name);
- print_size(spi_flash->page_size, ", erase size ");
- print_size(spi_flash->erasesize, ", total ");
- print_size(spi_flash->size, "");
- printf(", revision %c", revision);
- puts("\n");
-#endif
-
- return 0;
-}
-
-struct flash_info {
- char *name;
-
- /*
- * JEDEC id has a high byte of zero plus three data bytes:
- * the manufacturer id, then a two byte device id.
- */
- uint32_t jedec_id;
-
- /* The size listed here is what works with OP_ERASE_PAGE. */
- unsigned nr_pages;
- uint16_t pagesize;
- uint16_t pageoffset;
-
- uint16_t flags;
-#define SUP_POW2PS 0x0002 /* supports 2^N byte pages */
-#define IS_POW2PS 0x0001 /* uses 2^N byte pages */
-};
-
-static struct flash_info dataflash_data[] = {
- /*
- * NOTE: chips with SUP_POW2PS (rev D and up) need two entries,
- * one with IS_POW2PS and the other without. The entry with the
- * non-2^N byte page size can't name exact chip revisions without
- * losing backwards compatibility for cmdlinepart.
- *
- * Those two entries have different name spelling format in order to
- * show their difference obviously.
- * The upper case refer to the chip isn't in normal 2^N bytes page-size
- * mode.
- * The lower case refer to the chip is in normal 2^N bytes page-size
- * mode.
- *
- * These newer chips also support 128-byte security registers (with
- * 64 bytes one-time-programmable) and software write-protection.
- */
- { "AT45DB011B", 0x1f2200, 512, 264, 9, SUP_POW2PS},
- { "at45db011d", 0x1f2200, 512, 256, 8, SUP_POW2PS | IS_POW2PS},
-
- { "AT45DB021B", 0x1f2300, 1024, 264, 9, SUP_POW2PS},
- { "at45db021d", 0x1f2300, 1024, 256, 8, SUP_POW2PS | IS_POW2PS},
-
- { "AT45DB041x", 0x1f2400, 2048, 264, 9, SUP_POW2PS},
- { "at45db041d", 0x1f2400, 2048, 256, 8, SUP_POW2PS | IS_POW2PS},
-
- { "AT45DB081B", 0x1f2500, 4096, 264, 9, SUP_POW2PS},
- { "at45db081d", 0x1f2500, 4096, 256, 8, SUP_POW2PS | IS_POW2PS},
-
- { "AT45DB161x", 0x1f2600, 4096, 528, 10, SUP_POW2PS},
- { "at45db161d", 0x1f2600, 4096, 512, 9, SUP_POW2PS | IS_POW2PS},
-
- { "AT45DB321x", 0x1f2700, 8192, 528, 10, 0}, /* rev C */
-
- { "AT45DB321x", 0x1f2701, 8192, 528, 10, SUP_POW2PS},
- { "at45db321d", 0x1f2701, 8192, 512, 9, SUP_POW2PS | IS_POW2PS},
-
- { "AT45DB642x", 0x1f2800, 8192, 1056, 11, SUP_POW2PS},
- { "at45db642d", 0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS},
-};
-
-static struct flash_info *jedec_probe(struct spi_slave *spi, u8 *id)
-{
- int tmp;
- uint32_t jedec;
- struct flash_info *info;
- int status;
-
- /*
- * JEDEC also defines an optional "extended device information"
- * string for after vendor-specific data, after the three bytes
- * we use here. Supporting some chips might require using it.
- *
- * If the vendor ID isn't Atmel's (0x1f), assume this call failed.
- * That's not an error; only rev C and newer chips handle it, and
- * only Atmel sells these chips.
- */
- if (id[0] != 0x1f)
- return NULL;
-
- jedec = id[0];
- jedec = jedec << 8;
- jedec |= id[1];
- jedec = jedec << 8;
- jedec |= id[2];
-
- for (tmp = 0, info = dataflash_data;
- tmp < ARRAY_SIZE(dataflash_data);
- tmp++, info++) {
- if (info->jedec_id == jedec) {
- if (info->flags & SUP_POW2PS) {
- status = dataflash_status(spi);
- if (status < 0) {
- debug("SPI DataFlash: status error %d\n",
- status);
- return NULL;
- }
- if (status & 0x1) {
- if (info->flags & IS_POW2PS)
- return info;
- } else {
- if (!(info->flags & IS_POW2PS))
- return info;
- }
- } else {
- return info;
- }
- }
- }
-
- /*
- * Treat other chips as errors ... we won't know the right page
- * size (it might be binary) even when we can tell which density
- * class is involved (legacy chip id scheme).
- */
- printf("SPI DataFlash: Unsupported flash IDs: ");
- printf("manuf %02x, jedec %04x, ext_jedec %04x\n",
- id[0], jedec, id[3] << 8 | id[4]);
- return NULL;
-}
-
-/*
- * Detect and initialize DataFlash device, using JEDEC IDs on newer chips
- * or else the ID code embedded in the status bits:
- *
- * Device Density ID code #Pages PageSize Offset
- * AT45DB011B 1Mbit (128K) xx0011xx (0x0c) 512 264 9
- * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1024 264 9
- * AT45DB041B 4Mbit (512K) xx0111xx (0x1c) 2048 264 9
- * AT45DB081B 8Mbit (1M) xx1001xx (0x24) 4096 264 9
- * AT45DB0161B 16Mbit (2M) xx1011xx (0x2c) 4096 528 10
- * AT45DB0321B 32Mbit (4M) xx1101xx (0x34) 8192 528 10
- * AT45DB0642 64Mbit (8M) xx111xxx (0x3c) 8192 1056 11
- * AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11
- */
-static int spi_dataflash_probe(struct udevice *dev)
-{
- struct spi_slave *spi = dev_get_parent_priv(dev);
- struct spi_flash *spi_flash;
- struct flash_info *info;
- u8 idcode[5];
- int ret, status = 0;
-
- spi_flash = dev_get_uclass_priv(dev);
- spi_flash->dev = dev;
-
- ret = spi_claim_bus(spi);
- if (ret)
- return ret;
-
- ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode));
- if (ret) {
- printf("SPI DataFlash: Failed to get idcodes\n");
- goto err_read_cmd;
- }
-
- /*
- * Try to detect dataflash by JEDEC ID.
- * If it succeeds we know we have either a C or D part.
- * D will support power of 2 pagesize option.
- * Both support the security register, though with different
- * write procedures.
- */
- info = jedec_probe(spi, idcode);
- if (info != NULL)
- add_dataflash(dev, info->name, info->nr_pages,
- info->pagesize, info->pageoffset,
- (info->flags & SUP_POW2PS) ? 'd' : 'c');
- else {
- /*
- * Older chips support only legacy commands, identifing
- * capacity using bits in the status byte.
- */
- status = dataflash_status(spi);
- if (status <= 0 || status == 0xff) {
- printf("SPI DataFlash: read status error %d\n", status);
- if (status == 0 || status == 0xff)
- status = -ENODEV;
- goto err_read_cmd;
- }
- /*
- * if there's a device there, assume it's dataflash.
- * board setup should have set spi->max_speed_max to
- * match f(car) for continuous reads, mode 0 or 3.
- */
- switch (status & 0x3c) {
- case 0x0c: /* 0 0 1 1 x x */
- status = add_dataflash(dev, "AT45DB011B",
- 512, 264, 9, 0);
- break;
- case 0x14: /* 0 1 0 1 x x */
- status = add_dataflash(dev, "AT45DB021B",
- 1024, 264, 9, 0);
- break;
- case 0x1c: /* 0 1 1 1 x x */
- status = add_dataflash(dev, "AT45DB041x",
- 2048, 264, 9, 0);
- break;
- case 0x24: /* 1 0 0 1 x x */
- status = add_dataflash(dev, "AT45DB081B",
- 4096, 264, 9, 0);
- break;
- case 0x2c: /* 1 0 1 1 x x */
- status = add_dataflash(dev, "AT45DB161x",
- 4096, 528, 10, 0);
- break;
- case 0x34: /* 1 1 0 1 x x */
- status = add_dataflash(dev, "AT45DB321x",
- 8192, 528, 10, 0);
- break;
- case 0x38: /* 1 1 1 x x x */
- case 0x3c:
- status = add_dataflash(dev, "AT45DB642x",
- 8192, 1056, 11, 0);
- break;
- /* obsolete AT45DB1282 not (yet?) supported */
- default:
- dev_info(&spi->dev, "unsupported device (%x)\n",
- status & 0x3c);
- status = -ENODEV;
- goto err_read_cmd;
- }
- }
-
- /* Assign spi data */
- spi_flash->spi = spi;
- spi_flash->memory_map = spi->memory_map;
- spi_flash->dual_flash = spi->option;
-
- spi_release_bus(spi);
-
- return 0;
-
-err_read_cmd:
- spi_release_bus(spi);
-
- return status;
-}
-
-static const struct dm_spi_flash_ops spi_dataflash_ops = {
- .read = spi_dataflash_read,
- .write = spi_dataflash_write,
- .erase = spi_dataflash_erase,
-};
-
-static const struct udevice_id spi_dataflash_ids[] = {
- { .compatible = "atmel,at45", },
- { .compatible = "atmel,dataflash", },
- { }
-};
-
-U_BOOT_DRIVER(spi_dataflash) = {
- .name = "spi_dataflash",
- .id = UCLASS_SPI_FLASH,
- .of_match = spi_dataflash_ids,
- .probe = spi_dataflash_probe,
- .priv_auto_alloc_size = sizeof(struct dataflash),
- .ops = &spi_dataflash_ops,
-};
diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
deleted file mode 100644
index 007a5a0..0000000
--- a/drivers/mtd/spi/sf_internal.h
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- * SPI flash internal definitions
- *
- * Copyright (C) 2008 Atmel Corporation
- * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _SF_INTERNAL_H_
-#define _SF_INTERNAL_H_
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-
-/* Dual SPI flash memories - see SPI_COMM_DUAL_... */
-enum spi_dual_flash {
- SF_SINGLE_FLASH = 0,
- SF_DUAL_STACKED_FLASH = BIT(0),
- SF_DUAL_PARALLEL_FLASH = BIT(1),
-};
-
-/* Enum list - Full read commands */
-enum spi_read_cmds {
- ARRAY_SLOW = BIT(0),
- ARRAY_FAST = BIT(1),
- DUAL_OUTPUT_FAST = BIT(2),
- QUAD_OUTPUT_FAST = BIT(3),
- DUAL_IO_FAST = BIT(4),
- QUAD_IO_FAST = BIT(5),
-};
-
-/* Normal - Extended - Full command set */
-#define RD_NORM (ARRAY_SLOW | ARRAY_FAST)
-#define RD_EXTN (RD_NORM | DUAL_OUTPUT_FAST | DUAL_IO_FAST)
-#define RD_FULL (RD_EXTN | QUAD_OUTPUT_FAST | QUAD_IO_FAST)
-
-/* sf param flags */
-enum {
-#ifndef CONFIG_SPI_FLASH_USE_4K_SECTORS
- SECT_4K = 0,
-#else
- SECT_4K = BIT(0),
-#endif
- SECT_32K = BIT(1),
- E_FSR = BIT(2),
- SST_WR = BIT(3),
- WR_QPP = BIT(4),
-};
-
-enum spi_nor_option_flags {
- SNOR_F_SST_WR = BIT(0),
- SNOR_F_USE_FSR = BIT(1),
-};
-
-#define SPI_FLASH_3B_ADDR_LEN 3
-#define SPI_FLASH_CMD_LEN (1 + SPI_FLASH_3B_ADDR_LEN)
-#define SPI_FLASH_16MB_BOUN 0x1000000
-
-/* CFI Manufacture ID's */
-#define SPI_FLASH_CFI_MFR_SPANSION 0x01
-#define SPI_FLASH_CFI_MFR_STMICRO 0x20
-#define SPI_FLASH_CFI_MFR_MACRONIX 0xc2
-#define SPI_FLASH_CFI_MFR_SST 0xbf
-#define SPI_FLASH_CFI_MFR_WINBOND 0xef
-#define SPI_FLASH_CFI_MFR_ATMEL 0x1f
-
-/* Erase commands */
-#define CMD_ERASE_4K 0x20
-#define CMD_ERASE_32K 0x52
-#define CMD_ERASE_CHIP 0xc7
-#define CMD_ERASE_64K 0xd8
-
-/* Write commands */
-#define CMD_WRITE_STATUS 0x01
-#define CMD_PAGE_PROGRAM 0x02
-#define CMD_WRITE_DISABLE 0x04
-#define CMD_WRITE_ENABLE 0x06
-#define CMD_QUAD_PAGE_PROGRAM 0x32
-#define CMD_WRITE_EVCR 0x61
-
-/* Read commands */
-#define CMD_READ_ARRAY_SLOW 0x03
-#define CMD_READ_ARRAY_FAST 0x0b
-#define CMD_READ_DUAL_OUTPUT_FAST 0x3b
-#define CMD_READ_DUAL_IO_FAST 0xbb
-#define CMD_READ_QUAD_OUTPUT_FAST 0x6b
-#define CMD_READ_QUAD_IO_FAST 0xeb
-#define CMD_READ_ID 0x9f
-#define CMD_READ_STATUS 0x05
-#define CMD_READ_STATUS1 0x35
-#define CMD_READ_CONFIG 0x35
-#define CMD_FLAG_STATUS 0x70
-#define CMD_READ_EVCR 0x65
-
-/* Bank addr access commands */
-#ifdef CONFIG_SPI_FLASH_BAR
-# define CMD_BANKADDR_BRWR 0x17
-# define CMD_BANKADDR_BRRD 0x16
-# define CMD_EXTNADDR_WREAR 0xC5
-# define CMD_EXTNADDR_RDEAR 0xC8
-#endif
-
-/* Common status */
-#define STATUS_WIP BIT(0)
-#define STATUS_QEB_WINSPAN BIT(1)
-#define STATUS_QEB_MXIC BIT(6)
-#define STATUS_PEC BIT(7)
-#define STATUS_QEB_MICRON BIT(7)
-#define SR_BP0 BIT(2) /* Block protect 0 */
-#define SR_BP1 BIT(3) /* Block protect 1 */
-#define SR_BP2 BIT(4) /* Block protect 2 */
-
-/* Flash timeout values */
-#define SPI_FLASH_PROG_TIMEOUT (2 * CONFIG_SYS_HZ)
-#define SPI_FLASH_PAGE_ERASE_TIMEOUT (5 * CONFIG_SYS_HZ)
-#define SPI_FLASH_SECTOR_ERASE_TIMEOUT (10 * CONFIG_SYS_HZ)
-
-/* SST specific */
-#ifdef CONFIG_SPI_FLASH_SST
-# define CMD_SST_BP 0x02 /* Byte Program */
-# define CMD_SST_AAI_WP 0xAD /* Auto Address Incr Word Program */
-
-int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len,
- const void *buf);
-int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len,
- const void *buf);
-#endif
-
-/**
- * struct spi_flash_params - SPI/QSPI flash device params structure
- *
- * @name: Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO])
- * @jedec: Device jedec ID (0x[1byte_manuf_id][2byte_dev_id])
- * @ext_jedec: Device ext_jedec ID
- * @sector_size: Isn't necessarily a sector size from vendor,
- * the size listed here is what works with CMD_ERASE_64K
- * @nr_sectors: No.of sectors on this device
- * @e_rd_cmd: Enum list for read commands
- * @flags: Important param, for flash specific behaviour
- */
-struct spi_flash_params {
- const char *name;
- u32 jedec;
- u16 ext_jedec;
- u32 sector_size;
- u32 nr_sectors;
- u8 e_rd_cmd;
- u16 flags;
-};
-
-extern const struct spi_flash_params spi_flash_params_table[];
-
-/* Send a single-byte command to the device and read the response */
-int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len);
-
-/*
- * Send a multi-byte command to the device and read the response. Used
- * for flash array reads, etc.
- */
-int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd,
- size_t cmd_len, void *data, size_t data_len);
-
-/*
- * Send a multi-byte command to the device followed by (optional)
- * data. Used for programming the flash array, etc.
- */
-int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
- const void *data, size_t data_len);
-
-
-/* Flash erase(sectors) operation, support all possible erase commands */
-int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len);
-
-/* Lock stmicro spi flash region */
-int stm_lock(struct spi_flash *flash, u32 ofs, size_t len);
-
-/* Unlock stmicro spi flash region */
-int stm_unlock(struct spi_flash *flash, u32 ofs, size_t len);
-
-/* Check if a stmicro spi flash region is completely locked */
-int stm_is_locked(struct spi_flash *flash, u32 ofs, size_t len);
-
-/* Enable writing on the SPI flash */
-static inline int spi_flash_cmd_write_enable(struct spi_flash *flash)
-{
- return spi_flash_cmd(flash->spi, CMD_WRITE_ENABLE, NULL, 0);
-}
-
-/* Disable writing on the SPI flash */
-static inline int spi_flash_cmd_write_disable(struct spi_flash *flash)
-{
- return spi_flash_cmd(flash->spi, CMD_WRITE_DISABLE, NULL, 0);
-}
-
-/*
- * Used for spi_flash write operation
- * - SPI claim
- * - spi_flash_cmd_write_enable
- * - spi_flash_cmd_write
- * - spi_flash_cmd_wait_ready
- * - SPI release
- */
-int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
- size_t cmd_len, const void *buf, size_t buf_len);
-
-/*
- * Flash write operation, support all possible write commands.
- * Write the requested data out breaking it up into multiple write
- * commands as needed per the write size.
- */
-int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
- size_t len, const void *buf);
-
-/*
- * Same as spi_flash_cmd_read() except it also claims/releases the SPI
- * bus. Used as common part of the ->read() operation.
- */
-int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
- size_t cmd_len, void *data, size_t data_len);
-
-/* Flash read operation, support all possible read commands */
-int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
- size_t len, void *data);
-
-#ifdef CONFIG_SPI_FLASH_MTD
-int spi_flash_mtd_register(struct spi_flash *flash);
-void spi_flash_mtd_unregister(void);
-#endif
-
-/**
- * spi_flash_scan - scan the SPI FLASH
- * @flash: the spi flash structure
- *
- * The drivers can use this fuction to scan the SPI FLASH.
- * In the scanning, it will try to get all the necessary information to
- * fill the spi_flash{}.
- *
- * Return: 0 for success, others for failure.
- */
-int spi_flash_scan(struct spi_flash *flash);
-
-#endif /* _SF_INTERNAL_H_ */
diff --git a/drivers/mtd/spi/sf_mtd.c b/drivers/mtd/spi/sf_mtd.c
deleted file mode 100644
index 9a8302d..0000000
--- a/drivers/mtd/spi/sf_mtd.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * Copyright (C) 2012-2014 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <asm/errno.h>
-#include <linux/mtd/mtd.h>
-#include <spi_flash.h>
-
-static struct mtd_info sf_mtd_info;
-static char sf_mtd_name[8];
-
-static int spi_flash_mtd_erase(struct mtd_info *mtd, struct erase_info *instr)
-{
- struct spi_flash *flash = mtd->priv;
- int err;
-
- instr->state = MTD_ERASING;
-
- err = spi_flash_erase(flash, instr->addr, instr->len);
- if (err) {
- instr->state = MTD_ERASE_FAILED;
- instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
- return -EIO;
- }
-
- instr->state = MTD_ERASE_DONE;
- mtd_erase_callback(instr);
-
- return 0;
-}
-
-static int spi_flash_mtd_read(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char *buf)
-{
- struct spi_flash *flash = mtd->priv;
- int err;
-
- err = spi_flash_read(flash, from, len, buf);
- if (!err)
- *retlen = len;
-
- return err;
-}
-
-static int spi_flash_mtd_write(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
-{
- struct spi_flash *flash = mtd->priv;
- int err;
-
- err = spi_flash_write(flash, to, len, buf);
- if (!err)
- *retlen = len;
-
- return err;
-}
-
-static void spi_flash_mtd_sync(struct mtd_info *mtd)
-{
-}
-
-static int spi_flash_mtd_number(void)
-{
-#ifdef CONFIG_SYS_MAX_FLASH_BANKS
- return CONFIG_SYS_MAX_FLASH_BANKS;
-#else
- return 0;
-#endif
-}
-
-int spi_flash_mtd_register(struct spi_flash *flash)
-{
- memset(&sf_mtd_info, 0, sizeof(sf_mtd_info));
- sprintf(sf_mtd_name, "nor%d", spi_flash_mtd_number());
-
- sf_mtd_info.name = sf_mtd_name;
- sf_mtd_info.type = MTD_NORFLASH;
- sf_mtd_info.flags = MTD_CAP_NORFLASH;
- sf_mtd_info.writesize = 1;
- sf_mtd_info.writebufsize = flash->page_size;
-
- sf_mtd_info._erase = spi_flash_mtd_erase;
- sf_mtd_info._read = spi_flash_mtd_read;
- sf_mtd_info._write = spi_flash_mtd_write;
- sf_mtd_info._sync = spi_flash_mtd_sync;
-
- sf_mtd_info.size = flash->size;
- sf_mtd_info.priv = flash;
-
- /* Only uniform flash devices for now */
- sf_mtd_info.numeraseregions = 0;
- sf_mtd_info.erasesize = flash->erasesize;
-
- return add_mtd_device(&sf_mtd_info);
-}
-
-void spi_flash_mtd_unregister(void)
-{
- del_mtd_device(&sf_mtd_info);
-}
diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c
deleted file mode 100644
index 4f37e33..0000000
--- a/drivers/mtd/spi/sf_params.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * SPI flash Params table
- *
- * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <spi.h>
-#include <spi_flash.h>
-
-#include "sf_internal.h"
-
-/* SPI/QSPI flash device params structure */
-const struct spi_flash_params spi_flash_params_table[] = {
-#ifdef CONFIG_SPI_FLASH_ATMEL /* ATMEL */
- {"AT45DB011D", 0x1f2200, 0x0, 64 * 1024, 4, RD_NORM, SECT_4K},
- {"AT45DB021D", 0x1f2300, 0x0, 64 * 1024, 8, RD_NORM, SECT_4K},
- {"AT45DB041D", 0x1f2400, 0x0, 64 * 1024, 8, RD_NORM, SECT_4K},
- {"AT45DB081D", 0x1f2500, 0x0, 64 * 1024, 16, RD_NORM, SECT_4K},
- {"AT45DB161D", 0x1f2600, 0x0, 64 * 1024, 32, RD_NORM, SECT_4K},
- {"AT45DB321D", 0x1f2700, 0x0, 64 * 1024, 64, RD_NORM, SECT_4K},
- {"AT45DB641D", 0x1f2800, 0x0, 64 * 1024, 128, RD_NORM, SECT_4K},
- {"AT25DF321", 0x1f4701, 0x0, 64 * 1024, 64, RD_NORM, SECT_4K},
- {"AT26DF081A", 0x1f4501, 0x0, 64 * 1024, 16, RD_NORM, SECT_4K},
-#endif
-#ifdef CONFIG_SPI_FLASH_EON /* EON */
- {"EN25Q32B", 0x1c3016, 0x0, 64 * 1024, 64, RD_NORM, 0},
- {"EN25Q64", 0x1c3017, 0x0, 64 * 1024, 128, RD_NORM, SECT_4K},
- {"EN25Q128B", 0x1c3018, 0x0, 64 * 1024, 256, RD_NORM, 0},
- {"EN25S64", 0x1c3817, 0x0, 64 * 1024, 128, RD_NORM, 0},
-#endif
-#ifdef CONFIG_SPI_FLASH_GIGADEVICE /* GIGADEVICE */
- {"GD25Q64B", 0xc84017, 0x0, 64 * 1024, 128, RD_NORM, SECT_4K},
- {"GD25LQ32", 0xc86016, 0x0, 64 * 1024, 64, RD_NORM, SECT_4K},
-#endif
-#ifdef CONFIG_SPI_FLASH_ISSI /* ISSI */
- {"IS25LP032", 0x9d6016, 0x0, 64 * 1024, 64, RD_NORM, 0},
- {"IS25LP064", 0x9d6017, 0x0, 64 * 1024, 128, RD_NORM, 0},
- {"IS25LP128", 0x9d6018, 0x0, 64 * 1024, 256, RD_NORM, 0},
-#endif
-#ifdef CONFIG_SPI_FLASH_MACRONIX /* MACRONIX */
- {"MX25L2006E", 0xc22012, 0x0, 64 * 1024, 4, RD_NORM, 0},
- {"MX25L4005", 0xc22013, 0x0, 64 * 1024, 8, RD_NORM, 0},
- {"MX25L8005", 0xc22014, 0x0, 64 * 1024, 16, RD_NORM, 0},
- {"MX25L1605D", 0xc22015, 0x0, 64 * 1024, 32, RD_NORM, 0},
- {"MX25L3205D", 0xc22016, 0x0, 64 * 1024, 64, RD_NORM, 0},
- {"MX25L6405D", 0xc22017, 0x0, 64 * 1024, 128, RD_NORM, 0},
- {"MX25L12805", 0xc22018, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP},
- {"MX25L25635F", 0xc22019, 0x0, 64 * 1024, 512, RD_FULL, WR_QPP},
- {"MX25L51235F", 0xc2201a, 0x0, 64 * 1024, 1024, RD_FULL, WR_QPP},
- {"MX25L12855E", 0xc22618, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP},
-#endif
-#ifdef CONFIG_SPI_FLASH_SPANSION /* SPANSION */
- {"S25FL008A", 0x010213, 0x0, 64 * 1024, 16, RD_NORM, 0},
- {"S25FL016A", 0x010214, 0x0, 64 * 1024, 32, RD_NORM, 0},
- {"S25FL032A", 0x010215, 0x0, 64 * 1024, 64, RD_NORM, 0},
- {"S25FL064A", 0x010216, 0x0, 64 * 1024, 128, RD_NORM, 0},
- {"S25FL116K", 0x014015, 0x0, 64 * 1024, 128, RD_NORM, 0},
- {"S25FL164K", 0x014017, 0x0140, 64 * 1024, 128, RD_NORM, 0},
- {"S25FL128P_256K", 0x012018, 0x0300, 256 * 1024, 64, RD_FULL, WR_QPP},
- {"S25FL128P_64K", 0x012018, 0x0301, 64 * 1024, 256, RD_FULL, WR_QPP},
- {"S25FL032P", 0x010215, 0x4d00, 64 * 1024, 64, RD_FULL, WR_QPP},
- {"S25FL064P", 0x010216, 0x4d00, 64 * 1024, 128, RD_FULL, WR_QPP},
- {"S25FL128S_256K", 0x012018, 0x4d00, 256 * 1024, 64, RD_FULL, WR_QPP},
- {"S25FL128S_64K", 0x012018, 0x4d01, 64 * 1024, 256, RD_FULL, WR_QPP},
- {"S25FL256S_256K", 0x010219, 0x4d00, 256 * 1024, 128, RD_FULL, WR_QPP},
- {"S25FL256S_64K", 0x010219, 0x4d01, 64 * 1024, 512, RD_FULL, WR_QPP},
- {"S25FL512S_256K", 0x010220, 0x4d00, 256 * 1024, 256, RD_FULL, WR_QPP},
- {"S25FL512S_64K", 0x010220, 0x4d01, 64 * 1024, 1024, RD_FULL, WR_QPP},
- {"S25FL512S_512K", 0x010220, 0x4f00, 256 * 1024, 256, RD_FULL, WR_QPP},
-#endif
-#ifdef CONFIG_SPI_FLASH_STMICRO /* STMICRO */
- {"M25P10", 0x202011, 0x0, 32 * 1024, 4, RD_NORM, 0},
- {"M25P20", 0x202012, 0x0, 64 * 1024, 4, RD_NORM, 0},
- {"M25P40", 0x202013, 0x0, 64 * 1024, 8, RD_NORM, 0},
- {"M25P80", 0x202014, 0x0, 64 * 1024, 16, RD_NORM, 0},
- {"M25P16", 0x202015, 0x0, 64 * 1024, 32, RD_NORM, 0},
- {"M25PE16", 0x208015, 0x1000, 64 * 1024, 32, RD_NORM, 0},
- {"M25PX16", 0x207115, 0x1000, 64 * 1024, 32, RD_EXTN, 0},
- {"M25P32", 0x202016, 0x0, 64 * 1024, 64, RD_NORM, 0},
- {"M25P64", 0x202017, 0x0, 64 * 1024, 128, RD_NORM, 0},
- {"M25P128", 0x202018, 0x0, 256 * 1024, 64, RD_NORM, 0},
- {"M25PX64", 0x207117, 0x0, 64 * 1024, 128, RD_NORM, SECT_4K},
- {"N25Q32", 0x20ba16, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K},
- {"N25Q32A", 0x20bb16, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K},
- {"N25Q64", 0x20ba17, 0x0, 64 * 1024, 128, RD_FULL, WR_QPP | SECT_4K},
- {"N25Q64A", 0x20bb17, 0x0, 64 * 1024, 128, RD_FULL, WR_QPP | SECT_4K},
- {"N25Q128", 0x20ba18, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP},
- {"N25Q128A", 0x20bb18, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP},
- {"N25Q256", 0x20ba19, 0x0, 64 * 1024, 512, RD_FULL, WR_QPP | SECT_4K},
- {"N25Q256A", 0x20bb19, 0x0, 64 * 1024, 512, RD_FULL, WR_QPP | SECT_4K},
- {"N25Q512", 0x20ba20, 0x0, 64 * 1024, 1024, RD_FULL, WR_QPP | E_FSR | SECT_4K},
- {"N25Q512A", 0x20bb20, 0x0, 64 * 1024, 1024, RD_FULL, WR_QPP | E_FSR | SECT_4K},
- {"N25Q1024", 0x20ba21, 0x0, 64 * 1024, 2048, RD_FULL, WR_QPP | E_FSR | SECT_4K},
- {"N25Q1024A", 0x20bb21, 0x0, 64 * 1024, 2048, RD_FULL, WR_QPP | E_FSR | SECT_4K},
-#endif
-#ifdef CONFIG_SPI_FLASH_SST /* SST */
- {"SST25VF040B", 0xbf258d, 0x0, 64 * 1024, 8, RD_NORM, SECT_4K | SST_WR},
- {"SST25VF080B", 0xbf258e, 0x0, 64 * 1024, 16, RD_NORM, SECT_4K | SST_WR},
- {"SST25VF016B", 0xbf2541, 0x0, 64 * 1024, 32, RD_NORM, SECT_4K | SST_WR},
- {"SST25VF032B", 0xbf254a, 0x0, 64 * 1024, 64, RD_NORM, SECT_4K | SST_WR},
- {"SST25VF064C", 0xbf254b, 0x0, 64 * 1024, 128, RD_NORM, SECT_4K},
- {"SST25WF512", 0xbf2501, 0x0, 64 * 1024, 1, RD_NORM, SECT_4K | SST_WR},
- {"SST25WF010", 0xbf2502, 0x0, 64 * 1024, 2, RD_NORM, SECT_4K | SST_WR},
- {"SST25WF020", 0xbf2503, 0x0, 64 * 1024, 4, RD_NORM, SECT_4K | SST_WR},
- {"SST25WF040", 0xbf2504, 0x0, 64 * 1024, 8, RD_NORM, SECT_4K | SST_WR},
- {"SST25WF040B", 0x621613, 0x0, 64 * 1024, 8, RD_NORM, SECT_4K},
- {"SST25WF080", 0xbf2505, 0x0, 64 * 1024, 16, RD_NORM, SECT_4K | SST_WR},
-#endif
-#ifdef CONFIG_SPI_FLASH_WINBOND /* WINBOND */
- {"W25P80", 0xef2014, 0x0, 64 * 1024, 16, RD_NORM, 0},
- {"W25P16", 0xef2015, 0x0, 64 * 1024, 32, RD_NORM, 0},
- {"W25P32", 0xef2016, 0x0, 64 * 1024, 64, RD_NORM, 0},
- {"W25X40", 0xef3013, 0x0, 64 * 1024, 8, RD_NORM, SECT_4K},
- {"W25X16", 0xef3015, 0x0, 64 * 1024, 32, RD_NORM, SECT_4K},
- {"W25X32", 0xef3016, 0x0, 64 * 1024, 64, RD_NORM, SECT_4K},
- {"W25X64", 0xef3017, 0x0, 64 * 1024, 128, RD_NORM, SECT_4K},
- {"W25Q80BL", 0xef4014, 0x0, 64 * 1024, 16, RD_FULL, WR_QPP | SECT_4K},
- {"W25Q16CL", 0xef4015, 0x0, 64 * 1024, 32, RD_FULL, WR_QPP | SECT_4K},
- {"W25Q32BV", 0xef4016, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K},
- {"W25Q64CV", 0xef4017, 0x0, 64 * 1024, 128, RD_FULL, WR_QPP | SECT_4K},
- {"W25Q128BV", 0xef4018, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP | SECT_4K},
- {"W25Q256", 0xef4019, 0x0, 64 * 1024, 512, RD_FULL, WR_QPP | SECT_4K},
- {"W25Q80BW", 0xef5014, 0x0, 64 * 1024, 16, RD_FULL, WR_QPP | SECT_4K},
- {"W25Q16DW", 0xef6015, 0x0, 64 * 1024, 32, RD_FULL, WR_QPP | SECT_4K},
- {"W25Q32DW", 0xef6016, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K},
- {"W25Q64DW", 0xef6017, 0x0, 64 * 1024, 128, RD_FULL, WR_QPP | SECT_4K},
- {"W25Q128FW", 0xef6018, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP | SECT_4K},
-#endif
- {}, /* Empty entry to terminate the list */
- /*
- * Note:
- * Below paired flash devices has similar spi_flash params.
- * (S25FL129P_64K, S25FL128S_64K)
- * (W25Q80BL, W25Q80BV)
- * (W25Q16CL, W25Q16DV)
- * (W25Q32BV, W25Q32FV_SPI)
- * (W25Q64CV, W25Q64FV_SPI)
- * (W25Q128BV, W25Q128FV_SPI)
- * (W25Q32DW, W25Q32FV_QPI)
- * (W25Q64DW, W25Q64FV_QPI)
- * (W25Q128FW, W25Q128FV_QPI)
- */
-};
diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
deleted file mode 100644
index daa1d5b..0000000
--- a/drivers/mtd/spi/sf_probe.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * SPI flash probing
- *
- * Copyright (C) 2008 Atmel Corporation
- * Copyright (C) 2010 Reinhard Meyer, EMK Elektronik
- * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <dm.h>
-#include <errno.h>
-#include <malloc.h>
-#include <spi.h>
-#include <spi_flash.h>
-
-#include "sf_internal.h"
-
-/**
- * spi_flash_probe_slave() - Probe for a SPI flash device on a bus
- *
- * @flashp: Pointer to place to put flash info, which may be NULL if the
- * space should be allocated
- */
-static int spi_flash_probe_slave(struct spi_flash *flash)
-{
- struct spi_slave *spi = flash->spi;
- int ret;
-
- /* Setup spi_slave */
- if (!spi) {
- printf("SF: Failed to set up slave\n");
- return -ENODEV;
- }
-
- /* Claim spi bus */
- ret = spi_claim_bus(spi);
- if (ret) {
- debug("SF: Failed to claim SPI bus: %d\n", ret);
- return ret;
- }
-
- ret = spi_flash_scan(flash);
- if (ret) {
- ret = -EINVAL;
- goto err_read_id;
- }
-
-#ifdef CONFIG_SPI_FLASH_MTD
- ret = spi_flash_mtd_register(flash);
-#endif
-
-err_read_id:
- spi_release_bus(spi);
- return ret;
-}
-
-#ifndef CONFIG_DM_SPI_FLASH
-static struct spi_flash *spi_flash_probe_tail(struct spi_slave *bus)
-{
- struct spi_flash *flash;
-
- /* Allocate space if needed (not used by sf-uclass */
- flash = calloc(1, sizeof(*flash));
- if (!flash) {
- debug("SF: Failed to allocate spi_flash\n");
- return NULL;
- }
-
- flash->spi = bus;
- if (spi_flash_probe_slave(flash)) {
- spi_free_slave(bus);
- free(flash);
- return NULL;
- }
-
- return flash;
-}
-
-struct spi_flash *spi_flash_probe(unsigned int busnum, unsigned int cs,
- unsigned int max_hz, unsigned int spi_mode)
-{
- struct spi_slave *bus;
-
- bus = spi_setup_slave(busnum, cs, max_hz, spi_mode);
- if (!bus)
- return NULL;
- return spi_flash_probe_tail(bus);
-}
-
-#ifdef CONFIG_OF_SPI_FLASH
-struct spi_flash *spi_flash_probe_fdt(const void *blob, int slave_node,
- int spi_node)
-{
- struct spi_slave *bus;
-
- bus = spi_setup_slave_fdt(blob, slave_node, spi_node);
- if (!bus)
- return NULL;
- return spi_flash_probe_tail(bus);
-}
-#endif
-
-void spi_flash_free(struct spi_flash *flash)
-{
-#ifdef CONFIG_SPI_FLASH_MTD
- spi_flash_mtd_unregister();
-#endif
- spi_free_slave(flash->spi);
- free(flash);
-}
-
-#else /* defined CONFIG_DM_SPI_FLASH */
-
-static int spi_flash_std_read(struct udevice *dev, u32 offset, size_t len,
- void *buf)
-{
- struct spi_flash *flash = dev_get_uclass_priv(dev);
-
- return spi_flash_cmd_read_ops(flash, offset, len, buf);
-}
-
-static int spi_flash_std_write(struct udevice *dev, u32 offset, size_t len,
- const void *buf)
-{
- struct spi_flash *flash = dev_get_uclass_priv(dev);
-
-#if defined(CONFIG_SPI_FLASH_SST)
- if (flash->flags & SNOR_F_SST_WR) {
- if (flash->spi->mode & SPI_TX_BYTE)
- return sst_write_bp(flash, offset, len, buf);
- else
- return sst_write_wp(flash, offset, len, buf);
- }
-#endif
-
- return spi_flash_cmd_write_ops(flash, offset, len, buf);
-}
-
-static int spi_flash_std_erase(struct udevice *dev, u32 offset, size_t len)
-{
- struct spi_flash *flash = dev_get_uclass_priv(dev);
-
- return spi_flash_cmd_erase_ops(flash, offset, len);
-}
-
-static int spi_flash_std_probe(struct udevice *dev)
-{
- struct spi_slave *slave = dev_get_parent_priv(dev);
- struct dm_spi_slave_platdata *plat = dev_get_parent_platdata(dev);
- struct spi_flash *flash;
-
- flash = dev_get_uclass_priv(dev);
- flash->dev = dev;
- flash->spi = slave;
- debug("%s: slave=%p, cs=%d\n", __func__, slave, plat->cs);
- return spi_flash_probe_slave(flash);
-}
-
-static const struct dm_spi_flash_ops spi_flash_std_ops = {
- .read = spi_flash_std_read,
- .write = spi_flash_std_write,
- .erase = spi_flash_std_erase,
-};
-
-static const struct udevice_id spi_flash_std_ids[] = {
- { .compatible = "spi-flash" },
- { }
-};
-
-U_BOOT_DRIVER(spi_flash_std) = {
- .name = "spi_flash_std",
- .id = UCLASS_SPI_FLASH,
- .of_match = spi_flash_std_ids,
- .probe = spi_flash_std_probe,
- .priv_auto_alloc_size = sizeof(struct spi_flash),
- .ops = &spi_flash_std_ops,
-};
-
-#endif /* CONFIG_DM_SPI_FLASH */
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
deleted file mode 100644
index 891e1ec..0000000
--- a/drivers/mtd/spi/spi_flash.c
+++ /dev/null
@@ -1,1182 +0,0 @@
-/*
- * SPI Flash Core
- *
- * Copyright (C) 2015 Jagan Teki <jteki at openedev.com>
- * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
- * Copyright (C) 2010 Reinhard Meyer, EMK Elektronik
- * Copyright (C) 2008 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <errno.h>
-#include <malloc.h>
-#include <mapmem.h>
-#include <spi.h>
-#include <spi_flash.h>
-#include <linux/log2.h>
-
-#include "sf_internal.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void spi_flash_addr(u32 addr, u8 *cmd)
-{
- /* cmd[0] is actual command */
- cmd[1] = addr >> 16;
- cmd[2] = addr >> 8;
- cmd[3] = addr >> 0;
-}
-
-static int read_sr(struct spi_flash *flash, u8 *rs)
-{
- int ret;
- u8 cmd;
-
- cmd = CMD_READ_STATUS;
- ret = spi_flash_read_common(flash, &cmd, 1, rs, 1);
- if (ret < 0) {
- debug("SF: fail to read status register\n");
- return ret;
- }
-
- return 0;
-}
-
-static int read_fsr(struct spi_flash *flash, u8 *fsr)
-{
- int ret;
- const u8 cmd = CMD_FLAG_STATUS;
-
- ret = spi_flash_read_common(flash, &cmd, 1, fsr, 1);
- if (ret < 0) {
- debug("SF: fail to read flag status register\n");
- return ret;
- }
-
- return 0;
-}
-
-static int write_sr(struct spi_flash *flash, u8 ws)
-{
- u8 cmd;
- int ret;
-
- cmd = CMD_WRITE_STATUS;
- ret = spi_flash_write_common(flash, &cmd, 1, &ws, 1);
- if (ret < 0) {
- debug("SF: fail to write status register\n");
- return ret;
- }
-
- return 0;
-}
-
-#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
-static int read_cr(struct spi_flash *flash, u8 *rc)
-{
- int ret;
- u8 cmd;
-
- cmd = CMD_READ_CONFIG;
- ret = spi_flash_read_common(flash, &cmd, 1, rc, 1);
- if (ret < 0) {
- debug("SF: fail to read config register\n");
- return ret;
- }
-
- return 0;
-}
-
-static int write_cr(struct spi_flash *flash, u8 wc)
-{
- u8 data[2];
- u8 cmd;
- int ret;
-
- ret = read_sr(flash, &data[0]);
- if (ret < 0)
- return ret;
-
- cmd = CMD_WRITE_STATUS;
- data[1] = wc;
- ret = spi_flash_write_common(flash, &cmd, 1, &data, 2);
- if (ret) {
- debug("SF: fail to write config register\n");
- return ret;
- }
-
- return 0;
-}
-#endif
-
-#ifdef CONFIG_SPI_FLASH_STMICRO
-static int read_evcr(struct spi_flash *flash, u8 *evcr)
-{
- int ret;
- const u8 cmd = CMD_READ_EVCR;
-
- ret = spi_flash_read_common(flash, &cmd, 1, evcr, 1);
- if (ret < 0) {
- debug("SF: error reading EVCR\n");
- return ret;
- }
-
- return 0;
-}
-
-static int write_evcr(struct spi_flash *flash, u8 evcr)
-{
- u8 cmd;
- int ret;
-
- cmd = CMD_WRITE_EVCR;
- ret = spi_flash_write_common(flash, &cmd, 1, &evcr, 1);
- if (ret < 0) {
- debug("SF: error while writing EVCR register\n");
- return ret;
- }
-
- return 0;
-}
-#endif
-
-#ifdef CONFIG_SPI_FLASH_BAR
-static int spi_flash_write_bar(struct spi_flash *flash, u32 offset)
-{
- u8 cmd, bank_sel;
- int ret;
-
- bank_sel = offset / (SPI_FLASH_16MB_BOUN << flash->shift);
- if (bank_sel == flash->bank_curr)
- goto bar_end;
-
- cmd = flash->bank_write_cmd;
- ret = spi_flash_write_common(flash, &cmd, 1, &bank_sel, 1);
- if (ret < 0) {
- debug("SF: fail to write bank register\n");
- return ret;
- }
-
-bar_end:
- flash->bank_curr = bank_sel;
- return flash->bank_curr;
-}
-
-static int spi_flash_read_bar(struct spi_flash *flash, u8 idcode0)
-{
- u8 curr_bank = 0;
- int ret;
-
- if (flash->size <= SPI_FLASH_16MB_BOUN)
- goto bar_end;
-
- switch (idcode0) {
- case SPI_FLASH_CFI_MFR_SPANSION:
- flash->bank_read_cmd = CMD_BANKADDR_BRRD;
- flash->bank_write_cmd = CMD_BANKADDR_BRWR;
- break;
- default:
- flash->bank_read_cmd = CMD_EXTNADDR_RDEAR;
- flash->bank_write_cmd = CMD_EXTNADDR_WREAR;
- }
-
- ret = spi_flash_read_common(flash, &flash->bank_read_cmd, 1,
- &curr_bank, 1);
- if (ret) {
- debug("SF: fail to read bank addr register\n");
- return ret;
- }
-
-bar_end:
- flash->bank_curr = curr_bank;
- return 0;
-}
-#endif
-
-#ifdef CONFIG_SF_DUAL_FLASH
-static void spi_flash_dual(struct spi_flash *flash, u32 *addr)
-{
- struct spi_slave *spi = flash->spi;
-
- switch (flash->dual_flash) {
- case SF_DUAL_STACKED_FLASH:
- if (*addr >= (flash->size >> 1)) {
- *addr -= flash->size >> 1;
- spi->flags |= SPI_XFER_U_PAGE;
- } else {
- spi->flags &= ~SPI_XFER_U_PAGE;
- }
- break;
- case SF_DUAL_PARALLEL_FLASH:
- *addr >>= flash->shift;
- break;
- default:
- debug("SF: Unsupported dual_flash=%d\n", flash->dual_flash);
- break;
- }
-}
-#endif
-
-static int spi_flash_sr_ready(struct spi_flash *flash)
-{
- u8 sr;
- int ret;
-
- ret = read_sr(flash, &sr);
- if (ret < 0)
- return ret;
-
- return !(sr & STATUS_WIP);
-}
-
-static int spi_flash_fsr_ready(struct spi_flash *flash)
-{
- u8 fsr;
- int ret;
-
- ret = read_fsr(flash, &fsr);
- if (ret < 0)
- return ret;
-
- return fsr & STATUS_PEC;
-}
-
-static int spi_flash_ready(struct spi_flash *flash)
-{
- int sr, fsr;
-
- sr = spi_flash_sr_ready(flash);
- if (sr < 0)
- return sr;
-
- fsr = 1;
- if (flash->flags & SNOR_F_USE_FSR) {
- fsr = spi_flash_fsr_ready(flash);
- if (fsr < 0)
- return fsr;
- }
-
- return sr && fsr;
-}
-
-static int spi_flash_cmd_wait_ready(struct spi_flash *flash,
- unsigned long timeout)
-{
- int timebase, ret;
-
- timebase = get_timer(0);
-
- while (get_timer(timebase) < timeout) {
- ret = spi_flash_ready(flash);
- if (ret < 0)
- return ret;
- if (ret)
- return 0;
- }
-
- printf("SF: Timeout!\n");
-
- return -ETIMEDOUT;
-}
-
-int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
- size_t cmd_len, const void *buf, size_t buf_len)
-{
- struct spi_slave *spi = flash->spi;
- unsigned long timeout = SPI_FLASH_PROG_TIMEOUT;
- int ret;
-
- if (buf == NULL)
- timeout = SPI_FLASH_PAGE_ERASE_TIMEOUT;
-
- ret = spi_claim_bus(spi);
- if (ret) {
- debug("SF: unable to claim SPI bus\n");
- return ret;
- }
-
- ret = spi_flash_cmd_write_enable(flash);
- if (ret < 0) {
- debug("SF: enabling write failed\n");
- return ret;
- }
-
- ret = spi_flash_cmd_write(spi, cmd, cmd_len, buf, buf_len);
- if (ret < 0) {
- debug("SF: write cmd failed\n");
- return ret;
- }
-
- ret = spi_flash_cmd_wait_ready(flash, timeout);
- if (ret < 0) {
- debug("SF: write %s timed out\n",
- timeout == SPI_FLASH_PROG_TIMEOUT ?
- "program" : "page erase");
- return ret;
- }
-
- spi_release_bus(spi);
-
- return ret;
-}
-
-int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len)
-{
- u32 erase_size, erase_addr;
- u8 cmd[SPI_FLASH_CMD_LEN];
- int ret = -1;
-
- erase_size = flash->erasesize;
- if (offset % erase_size || len % erase_size) {
- debug("SF: Erase offset/length not multiple of erase size\n");
- return -1;
- }
-
- if (flash->flash_is_locked) {
- if (flash->flash_is_locked(flash, offset, len) > 0) {
- printf("offset 0x%x is protected and cannot be erased\n",
- offset);
- return -EINVAL;
- }
- }
-
- cmd[0] = flash->erase_cmd;
- while (len) {
- erase_addr = offset;
-
-#ifdef CONFIG_SF_DUAL_FLASH
- if (flash->dual_flash > SF_SINGLE_FLASH)
- spi_flash_dual(flash, &erase_addr);
-#endif
-#ifdef CONFIG_SPI_FLASH_BAR
- ret = spi_flash_write_bar(flash, erase_addr);
- if (ret < 0)
- return ret;
-#endif
- spi_flash_addr(erase_addr, cmd);
-
- debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1],
- cmd[2], cmd[3], erase_addr);
-
- ret = spi_flash_write_common(flash, cmd, sizeof(cmd), NULL, 0);
- if (ret < 0) {
- debug("SF: erase failed\n");
- break;
- }
-
- offset += erase_size;
- len -= erase_size;
- }
-
- return ret;
-}
-
-int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
- size_t len, const void *buf)
-{
- struct spi_slave *spi = flash->spi;
- unsigned long byte_addr, page_size;
- u32 write_addr;
- size_t chunk_len, actual;
- u8 cmd[SPI_FLASH_CMD_LEN];
- int ret = -1;
-
- page_size = flash->page_size;
-
- if (flash->flash_is_locked) {
- if (flash->flash_is_locked(flash, offset, len) > 0) {
- printf("offset 0x%x is protected and cannot be written\n",
- offset);
- return -EINVAL;
- }
- }
-
- cmd[0] = flash->write_cmd;
- for (actual = 0; actual < len; actual += chunk_len) {
- write_addr = offset;
-
-#ifdef CONFIG_SF_DUAL_FLASH
- if (flash->dual_flash > SF_SINGLE_FLASH)
- spi_flash_dual(flash, &write_addr);
-#endif
-#ifdef CONFIG_SPI_FLASH_BAR
- ret = spi_flash_write_bar(flash, write_addr);
- if (ret < 0)
- return ret;
-#endif
- byte_addr = offset % page_size;
- chunk_len = min(len - actual, (size_t)(page_size - byte_addr));
-
- if (spi->max_write_size)
- chunk_len = min(chunk_len,
- (size_t)spi->max_write_size);
-
- spi_flash_addr(write_addr, cmd);
-
- debug("SF: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zu\n",
- buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len);
-
- ret = spi_flash_write_common(flash, cmd, sizeof(cmd),
- buf + actual, chunk_len);
- if (ret < 0) {
- debug("SF: write failed\n");
- break;
- }
-
- offset += chunk_len;
- }
-
- return ret;
-}
-
-int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
- size_t cmd_len, void *data, size_t data_len)
-{
- struct spi_slave *spi = flash->spi;
- int ret;
-
- ret = spi_claim_bus(spi);
- if (ret) {
- debug("SF: unable to claim SPI bus\n");
- return ret;
- }
-
- ret = spi_flash_cmd_read(spi, cmd, cmd_len, data, data_len);
- if (ret < 0) {
- debug("SF: read cmd failed\n");
- return ret;
- }
-
- spi_release_bus(spi);
-
- return ret;
-}
-
-void __weak spi_flash_copy_mmap(void *data, void *offset, size_t len)
-{
- memcpy(data, offset, len);
-}
-
-int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
- size_t len, void *data)
-{
- struct spi_slave *spi = flash->spi;
- u8 *cmd, cmdsz;
- u32 remain_len, read_len, read_addr;
- int bank_sel = 0;
- int ret = -1;
-
- /* Handle memory-mapped SPI */
- if (flash->memory_map) {
- ret = spi_claim_bus(spi);
- if (ret) {
- debug("SF: unable to claim SPI bus\n");
- return ret;
- }
- spi_xfer(spi, 0, NULL, NULL, SPI_XFER_MMAP);
- spi_flash_copy_mmap(data, flash->memory_map + offset, len);
- spi_xfer(spi, 0, NULL, NULL, SPI_XFER_MMAP_END);
- spi_release_bus(spi);
- return 0;
- }
-
- cmdsz = SPI_FLASH_CMD_LEN + flash->dummy_byte;
- cmd = calloc(1, cmdsz);
- if (!cmd) {
- debug("SF: Failed to allocate cmd\n");
- return -ENOMEM;
- }
-
- cmd[0] = flash->read_cmd;
- while (len) {
- read_addr = offset;
-
-#ifdef CONFIG_SF_DUAL_FLASH
- if (flash->dual_flash > SF_SINGLE_FLASH)
- spi_flash_dual(flash, &read_addr);
-#endif
-#ifdef CONFIG_SPI_FLASH_BAR
- ret = spi_flash_write_bar(flash, read_addr);
- if (ret < 0)
- return ret;
- bank_sel = flash->bank_curr;
-#endif
- remain_len = ((SPI_FLASH_16MB_BOUN << flash->shift) *
- (bank_sel + 1)) - offset;
- if (len < remain_len)
- read_len = len;
- else
- read_len = remain_len;
-
- spi_flash_addr(read_addr, cmd);
-
- ret = spi_flash_read_common(flash, cmd, cmdsz, data, read_len);
- if (ret < 0) {
- debug("SF: read failed\n");
- break;
- }
-
- offset += read_len;
- len -= read_len;
- data += read_len;
- }
-
- free(cmd);
- return ret;
-}
-
-#ifdef CONFIG_SPI_FLASH_SST
-static int sst_byte_write(struct spi_flash *flash, u32 offset, const void *buf)
-{
- struct spi_slave *spi = flash->spi;
- int ret;
- u8 cmd[4] = {
- CMD_SST_BP,
- offset >> 16,
- offset >> 8,
- offset,
- };
-
- debug("BP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n",
- spi_w8r8(spi, CMD_READ_STATUS), buf, cmd[0], offset);
-
- ret = spi_flash_cmd_write_enable(flash);
- if (ret)
- return ret;
-
- ret = spi_flash_cmd_write(spi, cmd, sizeof(cmd), buf, 1);
- if (ret)
- return ret;
-
- return spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
-}
-
-int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len,
- const void *buf)
-{
- struct spi_slave *spi = flash->spi;
- size_t actual, cmd_len;
- int ret;
- u8 cmd[4];
-
- ret = spi_claim_bus(spi);
- if (ret) {
- debug("SF: Unable to claim SPI bus\n");
- return ret;
- }
-
- /* If the data is not word aligned, write out leading single byte */
- actual = offset % 2;
- if (actual) {
- ret = sst_byte_write(flash, offset, buf);
- if (ret)
- goto done;
- }
- offset += actual;
-
- ret = spi_flash_cmd_write_enable(flash);
- if (ret)
- goto done;
-
- cmd_len = 4;
- cmd[0] = CMD_SST_AAI_WP;
- cmd[1] = offset >> 16;
- cmd[2] = offset >> 8;
- cmd[3] = offset;
-
- for (; actual < len - 1; actual += 2) {
- debug("WP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n",
- spi_w8r8(spi, CMD_READ_STATUS), buf + actual,
- cmd[0], offset);
-
- ret = spi_flash_cmd_write(spi, cmd, cmd_len,
- buf + actual, 2);
- if (ret) {
- debug("SF: sst word program failed\n");
- break;
- }
-
- ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
- if (ret)
- break;
-
- cmd_len = 1;
- offset += 2;
- }
-
- if (!ret)
- ret = spi_flash_cmd_write_disable(flash);
-
- /* If there is a single trailing byte, write it out */
- if (!ret && actual != len)
- ret = sst_byte_write(flash, offset, buf + actual);
-
- done:
- debug("SF: sst: program %s %zu bytes @ 0x%zx\n",
- ret ? "failure" : "success", len, offset - actual);
-
- spi_release_bus(spi);
- return ret;
-}
-
-int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len,
- const void *buf)
-{
- struct spi_slave *spi = flash->spi;
- size_t actual;
- int ret;
-
- ret = spi_claim_bus(spi);
- if (ret) {
- debug("SF: Unable to claim SPI bus\n");
- return ret;
- }
-
- for (actual = 0; actual < len; actual++) {
- ret = sst_byte_write(flash, offset, buf + actual);
- if (ret) {
- debug("SF: sst byte program failed\n");
- break;
- }
- offset++;
- }
-
- if (!ret)
- ret = spi_flash_cmd_write_disable(flash);
-
- debug("SF: sst: program %s %zu bytes @ 0x%zx\n",
- ret ? "failure" : "success", len, offset - actual);
-
- spi_release_bus(spi);
- return ret;
-}
-#endif
-
-#if defined(CONFIG_SPI_FLASH_STMICRO) || defined(CONFIG_SPI_FLASH_SST)
-static void stm_get_locked_range(struct spi_flash *flash, u8 sr, loff_t *ofs,
- u32 *len)
-{
- u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
- int shift = ffs(mask) - 1;
- int pow;
-
- if (!(sr & mask)) {
- /* No protection */
- *ofs = 0;
- *len = 0;
- } else {
- pow = ((sr & mask) ^ mask) >> shift;
- *len = flash->size >> pow;
- *ofs = flash->size - *len;
- }
-}
-
-/*
- * Return 1 if the entire region is locked, 0 otherwise
- */
-static int stm_is_locked_sr(struct spi_flash *flash, u32 ofs, u32 len,
- u8 sr)
-{
- loff_t lock_offs;
- u32 lock_len;
-
- stm_get_locked_range(flash, sr, &lock_offs, &lock_len);
-
- return (ofs + len <= lock_offs + lock_len) && (ofs >= lock_offs);
-}
-
-/*
- * Check if a region of the flash is (completely) locked. See stm_lock() for
- * more info.
- *
- * Returns 1 if entire region is locked, 0 if any portion is unlocked, and
- * negative on errors.
- */
-int stm_is_locked(struct spi_flash *flash, u32 ofs, size_t len)
-{
- int status;
- u8 sr;
-
- status = read_sr(flash, &sr);
- if (status < 0)
- return status;
-
- return stm_is_locked_sr(flash, ofs, len, sr);
-}
-
-/*
- * Lock a region of the flash. Compatible with ST Micro and similar flash.
- * Supports only the block protection bits BP{0,1,2} in the status register
- * (SR). Does not support these features found in newer SR bitfields:
- * - TB: top/bottom protect - only handle TB=0 (top protect)
- * - SEC: sector/block protect - only handle SEC=0 (block protect)
- * - CMP: complement protect - only support CMP=0 (range is not complemented)
- *
- * Sample table portion for 8MB flash (Winbond w25q64fw):
- *
- * SEC | TB | BP2 | BP1 | BP0 | Prot Length | Protected Portion
- * --------------------------------------------------------------------------
- * X | X | 0 | 0 | 0 | NONE | NONE
- * 0 | 0 | 0 | 0 | 1 | 128 KB | Upper 1/64
- * 0 | 0 | 0 | 1 | 0 | 256 KB | Upper 1/32
- * 0 | 0 | 0 | 1 | 1 | 512 KB | Upper 1/16
- * 0 | 0 | 1 | 0 | 0 | 1 MB | Upper 1/8
- * 0 | 0 | 1 | 0 | 1 | 2 MB | Upper 1/4
- * 0 | 0 | 1 | 1 | 0 | 4 MB | Upper 1/2
- * X | X | 1 | 1 | 1 | 8 MB | ALL
- *
- * Returns negative on errors, 0 on success.
- */
-int stm_lock(struct spi_flash *flash, u32 ofs, size_t len)
-{
- u8 status_old, status_new;
- u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
- u8 shift = ffs(mask) - 1, pow, val;
- int ret;
-
- ret = read_sr(flash, &status_old);
- if (ret < 0)
- return ret;
-
- /* SPI NOR always locks to the end */
- if (ofs + len != flash->size) {
- /* Does combined region extend to end? */
- if (!stm_is_locked_sr(flash, ofs + len, flash->size - ofs - len,
- status_old))
- return -EINVAL;
- len = flash->size - ofs;
- }
-
- /*
- * Need smallest pow such that:
- *
- * 1 / (2^pow) <= (len / size)
- *
- * so (assuming power-of-2 size) we do:
- *
- * pow = ceil(log2(size / len)) = log2(size) - floor(log2(len))
- */
- pow = ilog2(flash->size) - ilog2(len);
- val = mask - (pow << shift);
- if (val & ~mask)
- return -EINVAL;
-
- /* Don't "lock" with no region! */
- if (!(val & mask))
- return -EINVAL;
-
- status_new = (status_old & ~mask) | val;
-
- /* Only modify protection if it will not unlock other areas */
- if ((status_new & mask) <= (status_old & mask))
- return -EINVAL;
-
- write_sr(flash, status_new);
-
- return 0;
-}
-
-/*
- * Unlock a region of the flash. See stm_lock() for more info
- *
- * Returns negative on errors, 0 on success.
- */
-int stm_unlock(struct spi_flash *flash, u32 ofs, size_t len)
-{
- uint8_t status_old, status_new;
- u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
- u8 shift = ffs(mask) - 1, pow, val;
- int ret;
-
- ret = read_sr(flash, &status_old);
- if (ret < 0)
- return ret;
-
- /* Cannot unlock; would unlock larger region than requested */
- if (stm_is_locked_sr(flash, ofs - flash->erasesize, flash->erasesize,
- status_old))
- return -EINVAL;
- /*
- * Need largest pow such that:
- *
- * 1 / (2^pow) >= (len / size)
- *
- * so (assuming power-of-2 size) we do:
- *
- * pow = floor(log2(size / len)) = log2(size) - ceil(log2(len))
- */
- pow = ilog2(flash->size) - order_base_2(flash->size - (ofs + len));
- if (ofs + len == flash->size) {
- val = 0; /* fully unlocked */
- } else {
- val = mask - (pow << shift);
- /* Some power-of-two sizes are not supported */
- if (val & ~mask)
- return -EINVAL;
- }
-
- status_new = (status_old & ~mask) | val;
-
- /* Only modify protection if it will not lock other areas */
- if ((status_new & mask) >= (status_old & mask))
- return -EINVAL;
-
- write_sr(flash, status_new);
-
- return 0;
-}
-#endif
-
-
-#ifdef CONFIG_SPI_FLASH_MACRONIX
-static int macronix_quad_enable(struct spi_flash *flash)
-{
- u8 qeb_status;
- int ret;
-
- ret = read_sr(flash, &qeb_status);
- if (ret < 0)
- return ret;
-
- if (qeb_status & STATUS_QEB_MXIC)
- return 0;
-
- ret = write_sr(flash, qeb_status | STATUS_QEB_MXIC);
- if (ret < 0)
- return ret;
-
- /* read SR and check it */
- ret = read_sr(flash, &qeb_status);
- if (!(ret >= 0 && (qeb_status & STATUS_QEB_MXIC))) {
- printf("SF: Macronix SR Quad bit not clear\n");
- return -EINVAL;
- }
-
- return ret;
-}
-#endif
-
-#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
-static int spansion_quad_enable(struct spi_flash *flash)
-{
- u8 qeb_status;
- int ret;
-
- ret = read_cr(flash, &qeb_status);
- if (ret < 0)
- return ret;
-
- if (qeb_status & STATUS_QEB_WINSPAN)
- return 0;
-
- ret = write_cr(flash, qeb_status | STATUS_QEB_WINSPAN);
- if (ret < 0)
- return ret;
-
- /* read CR and check it */
- ret = read_cr(flash, &qeb_status);
- if (!(ret >= 0 && (qeb_status & STATUS_QEB_WINSPAN))) {
- printf("SF: Spansion CR Quad bit not clear\n");
- return -EINVAL;
- }
-
- return ret;
-}
-#endif
-
-#ifdef CONFIG_SPI_FLASH_STMICRO
-static int micron_quad_enable(struct spi_flash *flash)
-{
- u8 qeb_status;
- int ret;
-
- ret = read_evcr(flash, &qeb_status);
- if (ret < 0)
- return ret;
-
- if (!(qeb_status & STATUS_QEB_MICRON))
- return 0;
-
- ret = write_evcr(flash, qeb_status & ~STATUS_QEB_MICRON);
- if (ret < 0)
- return ret;
-
- /* read EVCR and check it */
- ret = read_evcr(flash, &qeb_status);
- if (!(ret >= 0 && !(qeb_status & STATUS_QEB_MICRON))) {
- printf("SF: Micron EVCR Quad bit not clear\n");
- return -EINVAL;
- }
-
- return ret;
-}
-#endif
-
-static int set_quad_mode(struct spi_flash *flash, u8 idcode0)
-{
- switch (idcode0) {
-#ifdef CONFIG_SPI_FLASH_MACRONIX
- case SPI_FLASH_CFI_MFR_MACRONIX:
- return macronix_quad_enable(flash);
-#endif
-#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
- case SPI_FLASH_CFI_MFR_SPANSION:
- case SPI_FLASH_CFI_MFR_WINBOND:
- return spansion_quad_enable(flash);
-#endif
-#ifdef CONFIG_SPI_FLASH_STMICRO
- case SPI_FLASH_CFI_MFR_STMICRO:
- return micron_quad_enable(flash);
-#endif
- default:
- printf("SF: Need set QEB func for %02x flash\n", idcode0);
- return -1;
- }
-}
-
-#if CONFIG_IS_ENABLED(OF_CONTROL)
-int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
-{
-#ifdef CONFIG_DM_SPI_FLASH
- fdt_addr_t addr;
- fdt_size_t size;
- int node = flash->dev->of_offset;
-
- addr = fdtdec_get_addr_size(blob, node, "memory-map", &size);
- if (addr == FDT_ADDR_T_NONE) {
- debug("%s: Cannot decode address\n", __func__);
- return 0;
- }
-
- if (flash->size != size) {
- debug("%s: Memory map must cover entire device\n", __func__);
- return -1;
- }
- flash->memory_map = map_sysmem(addr, size);
-#endif
-
- return 0;
-}
-#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
-
-int spi_flash_scan(struct spi_flash *flash)
-{
- struct spi_slave *spi = flash->spi;
- const struct spi_flash_params *params;
- u16 jedec, ext_jedec;
- u8 cmd, idcode[5];
- int ret;
- static u8 spi_read_cmds_array[] = {
- CMD_READ_ARRAY_SLOW,
- CMD_READ_ARRAY_FAST,
- CMD_READ_DUAL_OUTPUT_FAST,
- CMD_READ_QUAD_OUTPUT_FAST,
- CMD_READ_DUAL_IO_FAST,
- CMD_READ_QUAD_IO_FAST };
-
- /* Read the ID codes */
- ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode));
- if (ret) {
- printf("SF: Failed to get idcodes\n");
- return -EINVAL;
- }
-
-#ifdef DEBUG
- printf("SF: Got idcodes\n");
- print_buffer(0, idcode, 1, sizeof(idcode), 0);
-#endif
-
- jedec = idcode[1] << 8 | idcode[2];
- ext_jedec = idcode[3] << 8 | idcode[4];
-
- /* Validate params from spi_flash_params table */
- params = spi_flash_params_table;
- for (; params->name != NULL; params++) {
- if ((params->jedec >> 16) == idcode[0]) {
- if ((params->jedec & 0xFFFF) == jedec) {
- if (params->ext_jedec == 0)
- break;
- else if (params->ext_jedec == ext_jedec)
- break;
- }
- }
- }
-
- if (!params->name) {
- printf("SF: Unsupported flash IDs: ");
- printf("manuf %02x, jedec %04x, ext_jedec %04x\n",
- idcode[0], jedec, ext_jedec);
- return -EPROTONOSUPPORT;
- }
-
- /* Flash powers up read-only, so clear BP# bits */
- if (idcode[0] == SPI_FLASH_CFI_MFR_ATMEL ||
- idcode[0] == SPI_FLASH_CFI_MFR_MACRONIX ||
- idcode[0] == SPI_FLASH_CFI_MFR_SST)
- write_sr(flash, 0);
-
- /* Assign spi data */
- flash->name = params->name;
- flash->memory_map = spi->memory_map;
- flash->dual_flash = spi->option;
-
- /* Assign spi flash flags */
- if (params->flags & SST_WR)
- flash->flags |= SNOR_F_SST_WR;
-
- /* Assign spi_flash ops */
-#ifndef CONFIG_DM_SPI_FLASH
- flash->write = spi_flash_cmd_write_ops;
-#if defined(CONFIG_SPI_FLASH_SST)
- if (flash->flags & SNOR_F_SST_WR) {
- if (spi->mode & SPI_TX_BYTE)
- flash->write = sst_write_bp;
- else
- flash->write = sst_write_wp;
- }
-#endif
- flash->erase = spi_flash_cmd_erase_ops;
- flash->read = spi_flash_cmd_read_ops;
-#endif
-
- /* lock hooks are flash specific - assign them based on idcode0 */
- switch (idcode[0]) {
-#if defined(CONFIG_SPI_FLASH_STMICRO) || defined(CONFIG_SPI_FLASH_SST)
- case SPI_FLASH_CFI_MFR_STMICRO:
- case SPI_FLASH_CFI_MFR_SST:
- flash->flash_lock = stm_lock;
- flash->flash_unlock = stm_unlock;
- flash->flash_is_locked = stm_is_locked;
-#endif
- break;
- default:
- debug("SF: Lock ops not supported for %02x flash\n", idcode[0]);
- }
-
- /* Compute the flash size */
- flash->shift = (flash->dual_flash & SF_DUAL_PARALLEL_FLASH) ? 1 : 0;
- /*
- * The Spansion S25FL032P and S25FL064P have 256b pages, yet use the
- * 0x4d00 Extended JEDEC code. The rest of the Spansion flashes with
- * the 0x4d00 Extended JEDEC code have 512b pages. All of the others
- * have 256b pages.
- */
- if (ext_jedec == 0x4d00) {
- if ((jedec == 0x0215) || (jedec == 0x216))
- flash->page_size = 256;
- else
- flash->page_size = 512;
- } else {
- flash->page_size = 256;
- }
- flash->page_size <<= flash->shift;
- flash->sector_size = params->sector_size << flash->shift;
- flash->size = flash->sector_size * params->nr_sectors << flash->shift;
-#ifdef CONFIG_SF_DUAL_FLASH
- if (flash->dual_flash & SF_DUAL_STACKED_FLASH)
- flash->size <<= 1;
-#endif
-
- /* Compute erase sector and command */
- if (params->flags & SECT_4K) {
- flash->erase_cmd = CMD_ERASE_4K;
- flash->erasesize = 4096 << flash->shift;
- } else if (params->flags & SECT_32K) {
- flash->erase_cmd = CMD_ERASE_32K;
- flash->erasesize = 32768 << flash->shift;
- } else {
- flash->erase_cmd = CMD_ERASE_64K;
- flash->erasesize = flash->sector_size;
- }
-
- /* Look for the fastest read cmd */
- cmd = fls(params->e_rd_cmd & spi->mode_rx);
- if (cmd) {
- cmd = spi_read_cmds_array[cmd - 1];
- flash->read_cmd = cmd;
- } else {
- /* Go for default supported read cmd */
- flash->read_cmd = CMD_READ_ARRAY_FAST;
- }
-
- /* Not require to look for fastest only two write cmds yet */
- if (params->flags & WR_QPP && spi->mode & SPI_TX_QUAD)
- flash->write_cmd = CMD_QUAD_PAGE_PROGRAM;
- else
- /* Go for default supported write cmd */
- flash->write_cmd = CMD_PAGE_PROGRAM;
-
- /* Set the quad enable bit - only for quad commands */
- if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) ||
- (flash->read_cmd == CMD_READ_QUAD_IO_FAST) ||
- (flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) {
- ret = set_quad_mode(flash, idcode[0]);
- if (ret) {
- debug("SF: Fail to set QEB for %02x\n", idcode[0]);
- return -EINVAL;
- }
- }
-
- /* Read dummy_byte: dummy byte is determined based on the
- * dummy cycles of a particular command.
- * Fast commands - dummy_byte = dummy_cycles/8
- * I/O commands- dummy_byte = (dummy_cycles * no.of lines)/8
- * For I/O commands except cmd[0] everything goes on no.of lines
- * based on particular command but incase of fast commands except
- * data all go on single line irrespective of command.
- */
- switch (flash->read_cmd) {
- case CMD_READ_QUAD_IO_FAST:
- flash->dummy_byte = 2;
- break;
- case CMD_READ_ARRAY_SLOW:
- flash->dummy_byte = 0;
- break;
- default:
- flash->dummy_byte = 1;
- }
-
-#ifdef CONFIG_SPI_FLASH_STMICRO
- if (params->flags & E_FSR)
- flash->flags |= SNOR_F_USE_FSR;
-#endif
-
- /* Configure the BAR - discover bank cmds and read current bank */
-#ifdef CONFIG_SPI_FLASH_BAR
- ret = spi_flash_read_bar(flash, idcode[0]);
- if (ret < 0)
- return ret;
-#endif
-
-#if CONFIG_IS_ENABLED(OF_CONTROL)
- ret = spi_flash_decode_fdt(gd->fdt_blob, flash);
- if (ret) {
- debug("SF: FDT decode error\n");
- return -EINVAL;
- }
-#endif
-
-#ifndef CONFIG_SPL_BUILD
- printf("SF: Detected %s with page size ", flash->name);
- print_size(flash->page_size, ", erase size ");
- print_size(flash->erasesize, ", total ");
- print_size(flash->size, "");
- if (flash->memory_map)
- printf(", mapped at %p", flash->memory_map);
- puts("\n");
-#endif
-
-#ifndef CONFIG_SPI_FLASH_BAR
- if (((flash->dual_flash == SF_SINGLE_FLASH) &&
- (flash->size > SPI_FLASH_16MB_BOUN)) ||
- ((flash->dual_flash > SF_SINGLE_FLASH) &&
- (flash->size > SPI_FLASH_16MB_BOUN << 1))) {
- puts("SF: Warning - Only lower 16MiB accessible,");
- puts(" Full access #define CONFIG_SPI_FLASH_BAR\n");
- }
-#endif
-
- return ret;
-}
diff --git a/drivers/mtd/spi/spi_spl_load.c b/drivers/mtd/spi/spi_spl_load.c
deleted file mode 100644
index ca56fe9..0000000
--- a/drivers/mtd/spi/spi_spl_load.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * Copyright (C) 2011 OMICRON electronics GmbH
- *
- * based on drivers/mtd/nand/nand_spl_load.c
- *
- * Copyright (C) 2011
- * Heiko Schocher, DENX Software Engineering, hs at denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <spi.h>
-#include <spi_flash.h>
-#include <errno.h>
-#include <spl.h>
-
-#ifdef CONFIG_SPL_OS_BOOT
-/*
- * Load the kernel, check for a valid header we can parse, and if found load
- * the kernel and then device tree.
- */
-static int spi_load_image_os(struct spi_flash *flash,
- struct image_header *header)
-{
- /* Read for a header, parse or error out. */
- spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS, 0x40,
- (void *)header);
-
- if (image_get_magic(header) != IH_MAGIC)
- return -1;
-
- spl_parse_image_header(header);
-
- spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS,
- spl_image.size, (void *)spl_image.load_addr);
-
- /* Read device tree. */
- spi_flash_read(flash, CONFIG_SYS_SPI_ARGS_OFFS,
- CONFIG_SYS_SPI_ARGS_SIZE,
- (void *)CONFIG_SYS_SPL_ARGS_ADDR);
-
- return 0;
-}
-#endif
-
-/*
- * The main entry for SPI booting. It's necessary that SDRAM is already
- * configured and available since this code loads the main U-Boot image
- * from SPI into SDRAM and starts it from there.
- */
-int spl_spi_load_image(void)
-{
- int err = 0;
- struct spi_flash *flash;
- struct image_header *header;
-
- /*
- * Load U-Boot image from SPI flash into RAM
- */
-
- flash = spi_flash_probe(CONFIG_SF_DEFAULT_BUS,
- CONFIG_SF_DEFAULT_CS,
- CONFIG_SF_DEFAULT_SPEED,
- CONFIG_SF_DEFAULT_MODE);
- if (!flash) {
- puts("SPI probe failed.\n");
- return -ENODEV;
- }
-
- /* use CONFIG_SYS_TEXT_BASE as temporary storage area */
- header = (struct image_header *)(CONFIG_SYS_TEXT_BASE);
-
-#ifdef CONFIG_SPL_OS_BOOT
- if (spl_start_uboot() || spi_load_image_os(flash, header))
-#endif
- {
- /* Load u-boot, mkimage header is 64 bytes. */
- err = spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS, 0x40,
- (void *)header);
- if (err)
- return err;
-
- spl_parse_image_header(header);
- err = spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS,
- spl_image.size, (void *)spl_image.load_addr);
- }
-
- return err;
-}
diff --git a/include/spi_flash.h b/include/spi_flash.h
index 962fab3..c9ea9e2 100644
--- a/include/spi_flash.h
+++ b/include/spi_flash.h
@@ -1,8 +1,9 @@
/*
* Common SPI flash Interface
*
- * Copyright (C) 2008 Atmel Corporation
+ * Copyright (C) 2016 Jagan Teki <jteki at openedev.com>
* Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
+ * Copyright (C) 2008 Atmel Corporation
*
* SPDX-License-Identifier: GPL-2.0
*/
@@ -27,90 +28,6 @@
# define CONFIG_SF_DEFAULT_BUS 0
#endif
-struct spi_slave;
-
-/**
- * struct spi_flash - SPI flash structure
- *
- * @spi: SPI slave
- * @dev: SPI flash device
- * @name: Name of SPI flash
- * @dual_flash: Indicates dual flash memories - dual stacked, parallel
- * @shift: Flash shift useful in dual parallel
- * @flags: Indication of spi flash flags
- * @size: Total flash size
- * @page_size: Write (page) size
- * @sector_size: Sector size
- * @erasesize: Erase size
- * @bank_read_cmd: Bank read cmd
- * @bank_write_cmd: Bank write cmd
- * @bank_curr: Current flash bank
- * @erase_cmd: Erase cmd 4K, 32K, 64K
- * @read_cmd: Read cmd - Array Fast, Extn read and quad read.
- * @write_cmd: Write cmd - page and quad program.
- * @dummy_byte: Dummy cycles for read operation.
- * @memory_map: Address of read-only SPI flash access
- * @flash_lock: lock a region of the SPI Flash
- * @flash_unlock: unlock a region of the SPI Flash
- * @flash_is_locked: check if a region of the SPI Flash is completely locked
- * @read: Flash read ops: Read len bytes at offset into buf
- * Supported cmds: Fast Array Read
- * @write: Flash write ops: Write len bytes from buf into offset
- * Supported cmds: Page Program
- * @erase: Flash erase ops: Erase len bytes from offset
- * Supported cmds: Sector erase 4K, 32K, 64K
- * return 0 - Success, 1 - Failure
- */
-struct spi_flash {
- struct spi_slave *spi;
-#ifdef CONFIG_DM_SPI_FLASH
- struct udevice *dev;
-#endif
- const char *name;
- u8 dual_flash;
- u8 shift;
- u16 flags;
-
- uint64_t size;
- u32 page_size;
- u32 sector_size;
- u32 erasesize;
-#ifdef CONFIG_SPI_FLASH_BAR
- u8 bank_read_cmd;
- u8 bank_write_cmd;
- u8 bank_curr;
-#endif
- u8 erase_cmd;
- u8 read_cmd;
- u8 write_cmd;
- u8 dummy_byte;
-
- void *memory_map;
-
- int (*flash_lock)(struct spi_flash *flash, u32 ofs, size_t len);
- int (*flash_unlock)(struct spi_flash *flash, u32 ofs, size_t len);
- int (*flash_is_locked)(struct spi_flash *flash, u32 ofs, size_t len);
-#ifndef CONFIG_DM_SPI_FLASH
- /*
- * These are not strictly needed for driver model, but keep them here
- * while the transition is in progress.
- *
- * Normally each driver would provide its own operations, but for
- * SPI flash most chips use the same algorithms. One approach is
- * to create a 'common' SPI flash device which knows how to talk
- * to most devices, and then allow other drivers to be used instead
- * if required, perhaps with a way of scanning through the list to
- * find the driver that matches the device.
- */
- int (*read)(struct spi_flash *flash, u32 offset, size_t len, void *buf);
- int (*write)(struct spi_flash *flash, u32 offset, size_t len,
- const void *buf);
- int (*erase)(struct spi_flash *flash, u32 offset, size_t len);
-#endif
-};
-
-#ifdef CONFIG_MTD_SPI_NOR
-
typedef struct mtd_info spi_flash_t;
static inline int spi_flash_read(spi_flash_t *info, u32 offset,
@@ -171,144 +88,6 @@ void spi_flash_free(spi_flash_t *flash);
#endif /* CONFIG_DM_MTD_SPI_NOR */
-#else
-
-typedef struct spi_flash spi_flash_t;
-
-static inline int spi_flash_protect(struct spi_flash *flash, u32 ofs, u32 len,
- bool prot)
-{
- if (!flash->flash_lock || !flash->flash_unlock)
- return -EOPNOTSUPP;
-
- if (prot)
- return flash->flash_lock(flash, ofs, len);
- else
- return flash->flash_unlock(flash, ofs, len);
-}
-
-#endif /* CONFIG_MTD_SPI_NOR */
-
-struct dm_spi_flash_ops {
- int (*read)(struct udevice *dev, u32 offset, size_t len, void *buf);
- int (*write)(struct udevice *dev, u32 offset, size_t len,
- const void *buf);
- int (*erase)(struct udevice *dev, u32 offset, size_t len);
-};
-
-/* Access the serial operations for a device */
-#define sf_get_ops(dev) ((struct dm_spi_flash_ops *)(dev)->driver->ops)
-
-#ifdef CONFIG_DM_SPI_FLASH
-/**
- * spi_flash_read_dm() - Read data from SPI flash
- *
- * @dev: SPI flash device
- * @offset: Offset into device in bytes to read from
- * @len: Number of bytes to read
- * @buf: Buffer to put the data that is read
- * @return 0 if OK, -ve on error
- */
-int spi_flash_read_dm(struct udevice *dev, u32 offset, size_t len, void *buf);
-
-/**
- * spi_flash_write_dm() - Write data to SPI flash
- *
- * @dev: SPI flash device
- * @offset: Offset into device in bytes to write to
- * @len: Number of bytes to write
- * @buf: Buffer containing bytes to write
- * @return 0 if OK, -ve on error
- */
-int spi_flash_write_dm(struct udevice *dev, u32 offset, size_t len,
- const void *buf);
-
-/**
- * spi_flash_erase_dm() - Erase blocks of the SPI flash
- *
- * Note that @len must be a muiltiple of the flash sector size.
- *
- * @dev: SPI flash device
- * @offset: Offset into device in bytes to start erasing
- * @len: Number of bytes to erase
- * @return 0 if OK, -ve on error
- */
-int spi_flash_erase_dm(struct udevice *dev, u32 offset, size_t len);
-
-int spi_flash_probe_bus_cs(unsigned int busnum, unsigned int cs,
- unsigned int max_hz, unsigned int spi_mode,
- struct udevice **devp);
-
-/* Compatibility function - this is the old U-Boot API */
-struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int spi_mode);
-
-/* Compatibility function - this is the old U-Boot API */
-void spi_flash_free(struct spi_flash *flash);
-
-static inline int spi_flash_read(struct spi_flash *flash, u32 offset,
- size_t len, void *buf)
-{
- return spi_flash_read_dm(flash->dev, offset, len, buf);
-}
-
-static inline int spi_flash_write(struct spi_flash *flash, u32 offset,
- size_t len, const void *buf)
-{
- return spi_flash_write_dm(flash->dev, offset, len, buf);
-}
-
-static inline int spi_flash_erase(struct spi_flash *flash, u32 offset,
- size_t len)
-{
- return spi_flash_erase_dm(flash->dev, offset, len);
-}
-
-struct sandbox_state;
-
-int sandbox_sf_bind_emul(struct sandbox_state *state, int busnum, int cs,
- struct udevice *bus, int of_offset, const char *spec);
-
-void sandbox_sf_unbind_emul(struct sandbox_state *state, int busnum, int cs);
-
-#elif !defined(CONFIG_MTD_SPI_NOR)
-
-struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int spi_mode);
-
-/**
- * Set up a new SPI flash from an fdt node
- *
- * @param blob Device tree blob
- * @param slave_node Pointer to this SPI slave node in the device tree
- * @param spi_node Cached pointer to the SPI interface this node belongs
- * to
- * @return 0 if ok, -1 on error
- */
-struct spi_flash *spi_flash_probe_fdt(const void *blob, int slave_node,
- int spi_node);
-
-void spi_flash_free(struct spi_flash *flash);
-
-static inline int spi_flash_read(struct spi_flash *flash, u32 offset,
- size_t len, void *buf)
-{
- return flash->read(flash, offset, len, buf);
-}
-
-static inline int spi_flash_write(struct spi_flash *flash, u32 offset,
- size_t len, const void *buf)
-{
- return flash->write(flash, offset, len, buf);
-}
-
-static inline int spi_flash_erase(struct spi_flash *flash, u32 offset,
- size_t len)
-{
- return flash->erase(flash, offset, len);
-}
-#endif
-
void spi_boot(void) __noreturn;
void spi_spl_load_image(uint32_t offs, unsigned int size, void *vdst);
--
1.9.1
More information about the U-Boot
mailing list