[U-Boot] [PATCH 11/13] usb: remove UniPhier EHCI driver

[Masahiro Yamada]

Currently, what this driver does is just to set the base address and
reset/clock handling.  The latter is cared by the clock driver now.
There is nothing special for this EHCI controller.

I want to use the generic-ehci driver rather than bothering to convert
this driver to Driver Model.

Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---

 drivers/usb/host/Kconfig         |  7 ----
 drivers/usb/host/Makefile        |  1 -
 drivers/usb/host/ehci-uniphier.c | 75 ----------------------------------------
 3 files changed, 83 deletions(-)
 delete mode 100644 drivers/usb/host/ehci-uniphier.c

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 39f7185..9332374 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -74,13 +74,6 @@ config USB_EHCI_MX6
 	---help---
 	  Enables support for the on-chip EHCI controller on i.MX6 SoCs.
 
-config USB_EHCI_UNIPHIER
-	bool "Support for UniPhier on-chip EHCI USB controller"
-	depends on ARCH_UNIPHIER && OF_CONTROL
-	default y
-	---help---
-	  Enables support for the on-chip EHCI controller on UniPhier SoCs.
-
 config USB_EHCI_GENERIC
 	bool "Support for generic EHCI USB controller"
 	depends on OF_CONTROL
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 6183b80..9a87d2b 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -47,7 +47,6 @@ obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
 obj-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o
 obj-$(CONFIG_USB_EHCI_SUNXI) += ehci-sunxi.o
 obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
-obj-$(CONFIG_USB_EHCI_UNIPHIER) += ehci-uniphier.o
 obj-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
 obj-$(CONFIG_USB_EHCI_VF) += ehci-vf.o
 obj-$(CONFIG_USB_EHCI_RMOBILE) += ehci-rmobile.o
diff --git a/drivers/usb/host/ehci-uniphier.c b/drivers/usb/host/ehci-uniphier.c
deleted file mode 100644
index c3f827c..0000000
--- a/drivers/usb/host/ehci-uniphier.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro at socionext.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <usb.h>
-#include <mach/mio-regs.h>
-#include <fdtdec.h>
-#include "ehci.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define FDT		gd->fdt_blob
-#define COMPAT		"socionext,uniphier-ehci"
-
-static int get_uniphier_ehci_base(int index, struct ehci_hccr **base)
-{
-	int offset;
-
-	for (offset = fdt_node_offset_by_compatible(FDT, 0, COMPAT);
-	     offset >= 0;
-	     offset = fdt_node_offset_by_compatible(FDT, offset, COMPAT)) {
-		if (index == 0) {
-			*base = (struct ehci_hccr *)
-					fdtdec_get_addr(FDT, offset, "reg");
-			return 0;
-		}
-		index--;
-	}
-
-	return -ENODEV; /* not found */
-}
-
-static void uniphier_ehci_reset(int index, int on)
-{
-	u32 tmp;
-
-	tmp = readl(MIO_USB_RSTCTRL(index));
-	if (on)
-		tmp &= ~MIO_USB_RSTCTRL_XRST;
-	else
-		tmp |= MIO_USB_RSTCTRL_XRST;
-	writel(tmp, MIO_USB_RSTCTRL(index));
-}
-
-int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr,
-		  struct ehci_hcor **hcor)
-{
-	int ret;
-	struct ehci_hccr *cr;
-	struct ehci_hcor *or;
-
-	uniphier_ehci_reset(index, 0);
-
-	ret = get_uniphier_ehci_base(index, &cr);
-	if (ret < 0)
-		return ret;
-	or = (void *)cr + HC_LENGTH(ehci_readl(&cr->cr_capbase));
-
-	*hccr = cr;
-	*hcor = or;
-
-	return 0;
-}
-
-int ehci_hcd_stop(int index)
-{
-	uniphier_ehci_reset(index, 1);
-
-	return 0;
-}
-- 
1.9.1