[U-Boot] [PATCH v3 2/2] imx: mx6sxsabreauto: Add support for mx6sx SABREAUTO board
Stefano Babic
sbabic at denx.de
Tue Feb 2 21:17:21 CET 2016
Hi Ye,
On 01/02/2016 03:41, Ye Li wrote:
> Initial version for mx6sx SABREAUTO board support with features:
> PMIC, QSPI, NAND flash, SD/MMC, USB, Ethernet, I2C, IO Expander.
>
> Signed-off-by: Ye Li <ye.li at nxp.com>
> ---
> Changes for v3:
> - None
> Changes for v2:
> - None
>
> arch/arm/cpu/armv7/mx6/Kconfig | 6 +
> board/freescale/mx6sxsabreauto/Kconfig | 12 +
> board/freescale/mx6sxsabreauto/MAINTAINERS | 6 +
> board/freescale/mx6sxsabreauto/Makefile | 6 +
> board/freescale/mx6sxsabreauto/imximage.cfg | 136 ++++++
> board/freescale/mx6sxsabreauto/mx6sxsabreauto.c | 508 +++++++++++++++++++++++
> configs/mx6sxsabreauto_defconfig | 11 +
> include/configs/mx6sxsabreauto.h | 212 ++++++++++
> 8 files changed, 897 insertions(+), 0 deletions(-)
> create mode 100644 board/freescale/mx6sxsabreauto/Kconfig
> create mode 100644 board/freescale/mx6sxsabreauto/MAINTAINERS
> create mode 100644 board/freescale/mx6sxsabreauto/Makefile
> create mode 100644 board/freescale/mx6sxsabreauto/imximage.cfg
> create mode 100644 board/freescale/mx6sxsabreauto/mx6sxsabreauto.c
> create mode 100644 configs/mx6sxsabreauto_defconfig
> create mode 100644 include/configs/mx6sxsabreauto.h
>
> diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig
> index 8489182..c72a150 100644
> --- a/arch/arm/cpu/armv7/mx6/Kconfig
> +++ b/arch/arm/cpu/armv7/mx6/Kconfig
> @@ -96,6 +96,11 @@ config TARGET_MX6SXSABRESD
> select DM
> select DM_THERMAL
>
> +config TARGET_MX6SXSABREAUTO
> + bool "mx6sxsabreauto"
> + select DM
> + select DM_THERMAL
> +
> config TARGET_MX6UL_9X9_EVK
> bool "mx6ul_9x9_evk"
> select MX6UL
> @@ -166,6 +171,7 @@ source "board/freescale/mx6qsabreauto/Kconfig"
> source "board/freescale/mx6sabresd/Kconfig"
> source "board/freescale/mx6slevk/Kconfig"
> source "board/freescale/mx6sxsabresd/Kconfig"
> +source "board/freescale/mx6sxsabreauto/Kconfig"
> source "board/freescale/mx6ul_14x14_evk/Kconfig"
> source "board/gateworks/gw_ventana/Kconfig"
> source "board/kosagi/novena/Kconfig"
> diff --git a/board/freescale/mx6sxsabreauto/Kconfig b/board/freescale/mx6sxsabreauto/Kconfig
> new file mode 100644
> index 0000000..ae2ea02
> --- /dev/null
> +++ b/board/freescale/mx6sxsabreauto/Kconfig
> @@ -0,0 +1,12 @@
> +if TARGET_MX6SXSABREAUTO
> +
> +config SYS_BOARD
> + default "mx6sxsabreauto"
> +
> +config SYS_VENDOR
> + default "freescale"
> +
> +config SYS_CONFIG_NAME
> + default "mx6sxsabreauto"
> +
> +endif
> diff --git a/board/freescale/mx6sxsabreauto/MAINTAINERS b/board/freescale/mx6sxsabreauto/MAINTAINERS
> new file mode 100644
> index 0000000..6f2ff44
> --- /dev/null
> +++ b/board/freescale/mx6sxsabreauto/MAINTAINERS
> @@ -0,0 +1,6 @@
> +MX6SXSABREAUTO BOARD
> +M: Fabio Estevam <fabio.estevam at nxp.com>
> +S: Maintained
> +F: board/freescale/mx6sxsabreauto/
> +F: include/configs/mx6sxsabreauto.h
> +F: configs/mx6sxsabreauto_defconfig
> diff --git a/board/freescale/mx6sxsabreauto/Makefile b/board/freescale/mx6sxsabreauto/Makefile
> new file mode 100644
> index 0000000..f0cd1ce
> --- /dev/null
> +++ b/board/freescale/mx6sxsabreauto/Makefile
> @@ -0,0 +1,6 @@
> +# (C) Copyright 2014 Freescale Semiconductor, Inc.
> +#
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +
> +obj-y := mx6sxsabreauto.o
> diff --git a/board/freescale/mx6sxsabreauto/imximage.cfg b/board/freescale/mx6sxsabreauto/imximage.cfg
> new file mode 100644
> index 0000000..529e555
> --- /dev/null
> +++ b/board/freescale/mx6sxsabreauto/imximage.cfg
> @@ -0,0 +1,136 @@
> +/*
> + * Copyright (C) 2014 Freescale Semiconductor, Inc.
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#define __ASSEMBLY__
> +#include <config.h>
> +
> +/* image version */
> +
> +IMAGE_VERSION 2
> +
> +/*
> + * Boot Device : one of
> + * spi/sd/nand/onenand, qspi/nor
> + */
> +
> +BOOT_FROM sd
> +
> +/*
> + * Device Configuration Data (DCD)
> + *
> + * Each entry must have the format:
> + * Addr-type Address Value
> + *
> + * where:
> + * Addr-type register length (1,2 or 4 bytes)
> + * Address absolute address of the register
> + * value value to be stored in the register
> + */
> +
> +/* Enable all clocks */
> +DATA 4 0x020c4068 0xffffffff
> +DATA 4 0x020c406c 0xffffffff
> +DATA 4 0x020c4070 0xffffffff
> +DATA 4 0x020c4074 0xffffffff
> +DATA 4 0x020c4078 0xffffffff
> +DATA 4 0x020c407c 0xffffffff
> +DATA 4 0x020c4080 0xffffffff
> +DATA 4 0x020c4084 0xffffffff
> +
> +/* IOMUX - DDR IO Type */
> +DATA 4 0x020e0618 0x000c0000
> +DATA 4 0x020e05fc 0x00000000
> +
> +/* Clock */
> +DATA 4 0x020e032c 0x00000030
> +
> +/* Address */
> +DATA 4 0x020e0300 0x00000030
> +DATA 4 0x020e02fc 0x00000030
> +DATA 4 0x020e05f4 0x00000030
> +
> +/* Control */
> +DATA 4 0x020e0340 0x00000030
> +
> +DATA 4 0x020e0320 0x00000000
> +DATA 4 0x020e0310 0x00000030
> +DATA 4 0x020e0314 0x00000030
> +DATA 4 0x020e0614 0x00000030
> +
> +/* Data Strobe */
> +DATA 4 0x020e05f8 0x00020000
> +DATA 4 0x020e0330 0x00000030
> +DATA 4 0x020e0334 0x00000030
> +DATA 4 0x020e0338 0x00000030
> +DATA 4 0x020e033c 0x00000030
> +
> +/* Data */
> +DATA 4 0x020e0608 0x00020000
> +DATA 4 0x020e060c 0x00000030
> +DATA 4 0x020e0610 0x00000030
> +DATA 4 0x020e061c 0x00000030
> +DATA 4 0x020e0620 0x00000030
> +DATA 4 0x020e02ec 0x00000030
> +DATA 4 0x020e02f0 0x00000030
> +DATA 4 0x020e02f4 0x00000030
> +DATA 4 0x020e02f8 0x00000030
> +
> +/* Calibrations - ZQ */
> +DATA 4 0x021b0800 0xa1390003
> +
> +/* Write leveling */
> +DATA 4 0x021b080c 0x002C003D
> +DATA 4 0x021b0810 0x00110046
> +
> +/* DQS Read Gate */
> +DATA 4 0x021b083c 0x4160016C
> +DATA 4 0x021b0840 0x013C016C
> +
> +/* Read/Write Delay */
> +DATA 4 0x021b0848 0x46424446
> +DATA 4 0x021b0850 0x3A3C3C3A
> +
> +DATA 4 0x021b08c0 0x2492244A
> +
> +/* read data bit delay */
> +DATA 4 0x021b081c 0x33333333
> +DATA 4 0x021b0820 0x33333333
> +DATA 4 0x021b0824 0x33333333
> +DATA 4 0x021b0828 0x33333333
> +
> +/* Complete calibration by forced measurement */
> +DATA 4 0x021b08b8 0x00000800
> +
> +/* MMDC init - DDR3, 64-bit mode, only MMDC0 is initiated */
> +DATA 4 0x021b0004 0x0002002d
> +DATA 4 0x021b0008 0x00333030
> +DATA 4 0x021b000c 0x676b52f3
> +DATA 4 0x021b0010 0xb66d8b63
> +DATA 4 0x021b0014 0x01ff00db
> +DATA 4 0x021b0018 0x00011740
> +DATA 4 0x021b001c 0x00008000
> +DATA 4 0x021b002c 0x000026d2
> +DATA 4 0x021b0030 0x006b1023
> +DATA 4 0x021b0040 0x0000007f
> +DATA 4 0x021b0000 0x85190000
> +
> +/* Initialize MT41K256M16HA-125 - MR2 */
> +DATA 4 0x021b001c 0x04008032
> +/* MR3 */
> +DATA 4 0x021b001c 0x00008033
> +/* MR1 */
> +DATA 4 0x021b001c 0x00068031
> +/* MR0 */
> +DATA 4 0x021b001c 0x05208030
> +/* DDR device ZQ calibration */
> +DATA 4 0x021b001c 0x04008040
> +
> +/* Final DDR setup, before operation start */
> +DATA 4 0x021b0020 0x00000800
> +DATA 4 0x021b0818 0x00022227
> +DATA 4 0x021b0004 0x0002556d
> +DATA 4 0x021b0404 0x00011006
> +DATA 4 0x021b001c 0x00000000
> diff --git a/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c b/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c
> new file mode 100644
> index 0000000..c9631d2
> --- /dev/null
> +++ b/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c
> @@ -0,0 +1,508 @@
> +/*
> + * Copyright (C) 2014 Freescale Semiconductor, Inc.
> + *
> + * Author: Ye Li <ye.li at nxp.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <asm/arch/clock.h>
> +#include <asm/arch/crm_regs.h>
> +#include <asm/arch/iomux.h>
> +#include <asm/arch/imx-regs.h>
> +#include <asm/arch/mx6-pins.h>
> +#include <asm/arch/sys_proto.h>
> +#include <asm/gpio.h>
> +#include <asm/imx-common/iomux-v3.h>
> +#include <asm/imx-common/boot_mode.h>
> +#include <asm/io.h>
> +#include <asm/imx-common/mxc_i2c.h>
> +#include <linux/sizes.h>
> +#include <common.h>
> +#include <fsl_esdhc.h>
> +#include <mmc.h>
> +#include <i2c.h>
> +#include <miiphy.h>
> +#include <netdev.h>
> +#include <power/pmic.h>
> +#include <power/pfuze100_pmic.h>
> +#include "../common/pfuze.h"
> +#include <usb.h>
> +#include <usb/ehci-fsl.h>
> +#include <pca953x.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
> + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
> + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
> +
> +#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
> + PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
> + PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
> +
> +#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
> + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
> + PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
> + PAD_CTL_ODE)
> +
> +#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \
> + PAD_CTL_SPEED_HIGH | \
> + PAD_CTL_DSE_48ohm | PAD_CTL_SRE_FAST)
> +
> +#define ENET_CLK_PAD_CTRL (PAD_CTL_SPEED_MED | \
> + PAD_CTL_DSE_120ohm | PAD_CTL_SRE_FAST)
> +
> +#define ENET_RX_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
> + PAD_CTL_SPEED_HIGH | PAD_CTL_SRE_FAST)
> +
> +#define I2C_PMIC 1
> +
> +#define GPMI_PAD_CTRL0 (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
> +#define GPMI_PAD_CTRL1 (PAD_CTL_DSE_40ohm | PAD_CTL_SPEED_MED | \
> + PAD_CTL_SRE_FAST)
> +#define GPMI_PAD_CTRL2 (GPMI_PAD_CTRL0 | GPMI_PAD_CTRL1)
> +
> +/*Define for building port exp gpio, pin starts from 0*/
> +#define PORTEXP_IO_NR(chip, pin) \
> + ((chip << 5) + pin)
> +
> +/*Get the chip addr from a ioexp gpio*/
> +#define PORTEXP_IO_TO_CHIP(gpio_nr) \
> + (gpio_nr >> 5)
> +
> +/*Get the pin number from a ioexp gpio*/
> +#define PORTEXP_IO_TO_PIN(gpio_nr) \
> + (gpio_nr & 0x1f)
> +
> +#define CPU_PER_RST_B PORTEXP_IO_NR(0x30, 4)
> +#define STEER_ENET PORTEXP_IO_NR(0x32, 2)
> +
> +static int port_exp_direction_output(unsigned gpio, int value)
> +{
> + int ret;
> +
> + i2c_set_bus_num(2);
> + ret = i2c_probe(PORTEXP_IO_TO_CHIP(gpio));
> + if (ret)
> + return ret;
> +
> + ret = pca953x_set_dir(PORTEXP_IO_TO_CHIP(gpio),
> + (1 << PORTEXP_IO_TO_PIN(gpio)),
> + (PCA953X_DIR_OUT << PORTEXP_IO_TO_PIN(gpio)));
> +
> + if (ret)
> + return ret;
> +
> + ret = pca953x_set_val(PORTEXP_IO_TO_CHIP(gpio),
> + (1 << PORTEXP_IO_TO_PIN(gpio)),
> + (value << PORTEXP_IO_TO_PIN(gpio)));
> +
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +int dram_init(void)
> +{
> + gd->ram_size = PHYS_SDRAM_SIZE;
Why do not use get_ram_size ?
> +
> + return 0;
> +}
> +
> +static iomux_v3_cfg_t const uart1_pads[] = {
> + MX6_PAD_GPIO1_IO04__UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
> + MX6_PAD_GPIO1_IO05__UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
> +};
> +
> +static iomux_v3_cfg_t const usdhc3_pads[] = {
> + MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD3_DATA0__USDHC3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD3_DATA1__USDHC3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD3_DATA2__USDHC3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD3_DATA3__USDHC3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD3_DATA4__USDHC3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD3_DATA5__USDHC3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD3_DATA6__USDHC3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD3_DATA7__USDHC3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> +
> + /* CD pin */
> + MX6_PAD_USB_H_DATA__GPIO7_IO_10 | MUX_PAD_CTRL(NO_PAD_CTRL),
> +
> + /* RST_B, used for power reset cycle */
> + MX6_PAD_KEY_COL1__GPIO2_IO_11 | MUX_PAD_CTRL(NO_PAD_CTRL),
> +};
> +
> +static iomux_v3_cfg_t const usdhc4_pads[] = {
> + MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD4_DATA0__USDHC4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD4_DATA1__USDHC4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD4_DATA2__USDHC4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD4_DATA3__USDHC4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD4_DATA4__USDHC4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD4_DATA5__USDHC4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD4_DATA6__USDHC4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD4_DATA7__USDHC4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> +
> + /* CD pin */
> + MX6_PAD_USB_H_STROBE__GPIO7_IO_11 | MUX_PAD_CTRL(NO_PAD_CTRL),
> +};
> +
> +static iomux_v3_cfg_t const fec2_pads[] = {
> + MX6_PAD_ENET1_MDC__ENET2_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
> + MX6_PAD_ENET1_MDIO__ENET2_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
> + MX6_PAD_RGMII2_RX_CTL__ENET2_RX_EN | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
> + MX6_PAD_RGMII2_RD0__ENET2_RX_DATA_0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
> + MX6_PAD_RGMII2_RD1__ENET2_RX_DATA_1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
> + MX6_PAD_RGMII2_RD2__ENET2_RX_DATA_2 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
> + MX6_PAD_RGMII2_RD3__ENET2_RX_DATA_3 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
> + MX6_PAD_RGMII2_RXC__ENET2_RX_CLK | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
> + MX6_PAD_RGMII2_TX_CTL__ENET2_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
> + MX6_PAD_RGMII2_TD0__ENET2_TX_DATA_0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
> + MX6_PAD_RGMII2_TD1__ENET2_TX_DATA_1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
> + MX6_PAD_RGMII2_TD2__ENET2_TX_DATA_2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
> + MX6_PAD_RGMII2_TD3__ENET2_TX_DATA_3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
> + MX6_PAD_RGMII2_TXC__ENET2_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
> +};
> +
> +static void setup_iomux_uart(void)
> +{
> + imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
> +}
> +
> +static int setup_fec(void)
> +{
> + struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
> +
> + /* Use 125MHz anatop loopback REF_CLK1 for ENET2 */
> + clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC2_MASK, 0);
> +
> + return enable_fec_anatop_clock(1, ENET_125MHZ);
> +}
> +
> +int board_eth_init(bd_t *bis)
> +{
> + int ret;
> +
> + imx_iomux_v3_setup_multiple_pads(fec2_pads, ARRAY_SIZE(fec2_pads));
> + setup_fec();
> +
> + ret = fecmxc_initialize_multi(bis, 1,
> + CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE);
> + if (ret)
> + printf("FEC%d MXC: %s:failed\n", 1, __func__);
> +
> + return ret;
> +}
> +
> +int board_phy_config(struct phy_device *phydev)
> +{
> + /*
> + * Enable 1.8V(SEL_1P5_1P8_POS_REG) on
> + * Phy control debug reg 0
> + */
> + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f);
> + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8);
> +
> + /* rgmii tx clock delay enable */
> + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
> + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
> +
> + if (phydev->drv->config)
> + phydev->drv->config(phydev);
> +
> + return 0;
> +}
> +
> +#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
PC just makes line shorter, but it has no meaning. At least, change the
name with something related to I2C or do not use the macro. I think it
is more readable.
> +/* I2C2 for PMIC */
> +struct i2c_pads_info i2c_pad_info2 = {
> + .scl = {
> + .i2c_mode = MX6_PAD_GPIO1_IO02__I2C2_SCL | PC,
> + .gpio_mode = MX6_PAD_GPIO1_IO02__GPIO1_IO_2 | PC,
> + .gp = IMX_GPIO_NR(1, 2),
> + },
> + .sda = {
> + .i2c_mode = MX6_PAD_GPIO1_IO03__I2C2_SDA | PC,
> + .gpio_mode = MX6_PAD_GPIO1_IO03__GPIO1_IO_3 | PC,
> + .gp = IMX_GPIO_NR(1, 3),
> + },
> +};
> +
> +/* I2C3 for IO Expander */
> +struct i2c_pads_info i2c_pad_info3 = {
> + .scl = {
> + .i2c_mode = MX6_PAD_KEY_COL4__I2C3_SCL | PC,
> + .gpio_mode = MX6_PAD_KEY_COL4__GPIO2_IO_14 | PC,
> + .gp = IMX_GPIO_NR(2, 14),
> + },
> + .sda = {
> + .i2c_mode = MX6_PAD_KEY_ROW4__I2C3_SDA | PC,
> + .gpio_mode = MX6_PAD_KEY_ROW4__GPIO2_IO_19 | PC,
> + .gp = IMX_GPIO_NR(2, 19),
> + },
> +};
> +
> +int power_init_board(void)
> +{
> + struct pmic *p;
> +
> + p = pfuze_common_init(I2C_PMIC);
> + if (!p)
> + return -ENODEV;
I have expected that PMIC is configured here. Which is the reason to
have power_init_board ? It looks like an empty function.
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_USB_EHCI_MX6
> +#define USB_OTHERREGS_OFFSET 0x800
> +#define UCTRL_PWR_POL (1 << 9)
> +
> +static iomux_v3_cfg_t const usb_otg_pads[] = {
> + /* OGT1 */
> + MX6_PAD_GPIO1_IO09__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
> + MX6_PAD_GPIO1_IO10__ANATOP_OTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
> + /* OTG2 */
> + MX6_PAD_GPIO1_IO12__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)
> +};
> +
> +static void setup_usb(void)
> +{
> + imx_iomux_v3_setup_multiple_pads(usb_otg_pads,
> + ARRAY_SIZE(usb_otg_pads));
> +}
> +
> +int board_usb_phy_mode(int port)
> +{
> + if (port == 1)
> + return USB_INIT_HOST;
> + else
> + return usb_phy_mode(port);
> +}
> +
> +int board_ehci_hcd_init(int port)
> +{
> + u32 *usbnc_usb_ctrl;
> +
> + if (port > 1)
> + return -EINVAL;
> +
> + usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET +
> + port * 4);
> +
> + /* Set Power polarity */
> + setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL);
> +
> + return 0;
> +}
> +#endif
> +
> +int board_early_init_f(void)
> +{
> + setup_iomux_uart();
> +
> + return 0;
> +}
> +
> +static struct fsl_esdhc_cfg usdhc_cfg[3] = {
> + {USDHC3_BASE_ADDR},
> + {USDHC4_BASE_ADDR},
> +};
> +
> +#define USDHC3_CD_GPIO IMX_GPIO_NR(7, 10)
> +#define USDHC3_RST_GPIO IMX_GPIO_NR(2, 11)
> +#define USDHC4_CD_GPIO IMX_GPIO_NR(7, 11)
> +
> +int board_mmc_getcd(struct mmc *mmc)
> +{
> + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
> + int ret = 0;
> +
> + switch (cfg->esdhc_base) {
> + case USDHC3_BASE_ADDR:
> + ret = !gpio_get_value(USDHC3_CD_GPIO);
> + break;
> + case USDHC4_BASE_ADDR:
> + ret = !gpio_get_value(USDHC4_CD_GPIO);
> + break;
> + }
> +
> + return ret;
> +}
> +
> +int board_mmc_init(bd_t *bis)
> +{
> + int i, ret;
> +
> + /*
> + * According to the board_mmc_init() the following map is done:
> + * (U-boot device node) (Physical Port)
> + * mmc0 USDHC3
> + * mmc1 USDHC4
> + */
> + for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
> + switch (i) {
> + case 0:
> + imx_iomux_v3_setup_multiple_pads(
> + usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
> + gpio_direction_input(USDHC3_CD_GPIO);
> +
> + /* This starts a power cycle for UHS-I. Need to set steer to B0 to A*/
> + gpio_direction_output(USDHC3_RST_GPIO, 0);
> + udelay(1000); /* need 1ms at least */
> + gpio_direction_output(USDHC3_RST_GPIO, 1);
> +
> + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
> + break;
> + case 1:
> + imx_iomux_v3_setup_multiple_pads(
> + usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
> + gpio_direction_input(USDHC4_CD_GPIO);
> + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
> + break;
> + default:
> + printf("Warning: you configured more USDHC controllers"
> + "(%d) than supported by the board\n", i + 1);
> + return -EINVAL;
> + }
> +
> + ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
> + if (ret) {
> + printf("Warning: failed to initialize mmc dev %d\n", i);
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_FSL_QSPI
> +
> +#define QSPI_PAD_CTRL1 \
> + (PAD_CTL_SRE_FAST | PAD_CTL_SPEED_HIGH | \
> + PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_40ohm)
> +
> +static iomux_v3_cfg_t const quadspi_pads[] = {
> + MX6_PAD_QSPI1A_SS0_B__QSPI1_A_SS0_B | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
> + MX6_PAD_QSPI1A_SCLK__QSPI1_A_SCLK | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
> + MX6_PAD_QSPI1A_DATA0__QSPI1_A_DATA_0 | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
> + MX6_PAD_QSPI1A_DATA1__QSPI1_A_DATA_1 | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
> + MX6_PAD_QSPI1A_DATA2__QSPI1_A_DATA_2 | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
> + MX6_PAD_QSPI1A_DATA3__QSPI1_A_DATA_3 | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
> + MX6_PAD_QSPI1B_SS0_B__QSPI1_B_SS0_B | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
> + MX6_PAD_QSPI1B_SCLK__QSPI1_B_SCLK | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
> + MX6_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0 | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
> + MX6_PAD_QSPI1B_DATA1__QSPI1_B_DATA_1 | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
> + MX6_PAD_QSPI1B_DATA2__QSPI1_B_DATA_2 | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
> + MX6_PAD_QSPI1B_DATA3__QSPI1_B_DATA_3 | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
> +};
> +
> +int board_qspi_init(void)
> +{
> + /* Set the iomux */
> + imx_iomux_v3_setup_multiple_pads(quadspi_pads,
> + ARRAY_SIZE(quadspi_pads));
> +
> + /* Set the clock */
> + enable_qspi_clk(0);
> +
> + return 0;
> +}
> +#endif
> +
> +#ifdef CONFIG_NAND_MXS
> +iomux_v3_cfg_t gpmi_pads[] = {
> + MX6_PAD_NAND_CLE__RAWNAND_CLE | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
> + MX6_PAD_NAND_ALE__RAWNAND_ALE | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
> + MX6_PAD_NAND_WP_B__RAWNAND_WP_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
> + MX6_PAD_NAND_READY_B__RAWNAND_READY_B | MUX_PAD_CTRL(GPMI_PAD_CTRL0),
> + MX6_PAD_NAND_CE0_B__RAWNAND_CE0_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
> + MX6_PAD_NAND_RE_B__RAWNAND_RE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
> + MX6_PAD_NAND_WE_B__RAWNAND_WE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
> + MX6_PAD_NAND_DATA00__RAWNAND_DATA00 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
> + MX6_PAD_NAND_DATA01__RAWNAND_DATA01 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
> + MX6_PAD_NAND_DATA02__RAWNAND_DATA02 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
> + MX6_PAD_NAND_DATA03__RAWNAND_DATA03 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
> + MX6_PAD_NAND_DATA04__RAWNAND_DATA04 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
> + MX6_PAD_NAND_DATA05__RAWNAND_DATA05 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
> + MX6_PAD_NAND_DATA06__RAWNAND_DATA06 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
> + MX6_PAD_NAND_DATA07__RAWNAND_DATA07 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
> +};
> +
> +static void setup_gpmi_nand(void)
> +{
> + struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
> +
> + /* config gpmi nand iomux */
> + imx_iomux_v3_setup_multiple_pads(gpmi_pads, ARRAY_SIZE(gpmi_pads));
> +
> + setup_gpmi_io_clk((MXC_CCM_CS2CDR_QSPI2_CLK_PODF(0) |
> + MXC_CCM_CS2CDR_QSPI2_CLK_PRED(3) |
> + MXC_CCM_CS2CDR_QSPI2_CLK_SEL(3)));
> +
> + /* enable apbh clock gating */
> + setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
> +}
> +#endif
> +
> +int board_init(void)
> +{
> + /* Address of boot parameters */
> + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
> +
> +#ifdef CONFIG_SYS_I2C_MXC
> + setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
> + setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3);
> +#endif
> +
> + /* Reset CPU_PER_RST_B signal for enet phy and PCIE */
> + port_exp_direction_output(CPU_PER_RST_B, 0);
Is this ok ? You have surrounded the I2C initialization with
CONFIG_SYS_I2C_MXC, but port_exp_direction_output() is outside. What
happens if CONFIG_SYS_I2C_MXC is not set ? Anyway, if you think that
CONFIG_SYS_I2C_MXC must be set, you could drop the #ifdef.
> + udelay(500);
> + port_exp_direction_output(CPU_PER_RST_B, 1);
> +
> + /* Set steering signal to L for selecting B0 */
> + port_exp_direction_output(STEER_ENET, 0);
> +
> +#ifdef CONFIG_USB_EHCI_MX6
> + setup_usb();
> +#endif
> +
> +#ifdef CONFIG_FSL_QSPI
> + board_qspi_init();
> +#endif
> +
> +#ifdef CONFIG_NAND_MXS
> + setup_gpmi_nand();
> +#endif
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_CMD_BMODE
> +static const struct boot_mode board_boot_modes[] = {
> + {"sda", MAKE_CFGVAL(0x42, 0x30, 0x00, 0x00)},
> + {"sdb", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
> + {"qspi1", MAKE_CFGVAL(0x10, 0x00, 0x00, 0x00)},
> + {"nand", MAKE_CFGVAL(0x82, 0x00, 0x00, 0x00)},
> + {NULL, 0},
> +};
> +#endif
> +
> +int board_late_init(void)
> +{
> +#ifdef CONFIG_CMD_BMODE
> + add_board_boot_modes(board_boot_modes);
> +#endif
> +
> + return 0;
> +}
> +
> +int checkboard(void)
> +{
> + puts("Board: MX6SX SABRE AUTO\n");
> +
> + return 0;
> +}
> diff --git a/configs/mx6sxsabreauto_defconfig b/configs/mx6sxsabreauto_defconfig
> new file mode 100644
> index 0000000..d9e35df
> --- /dev/null
> +++ b/configs/mx6sxsabreauto_defconfig
> @@ -0,0 +1,11 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_MX6=y
> +CONFIG_TARGET_MX6SXSABREAUTO=y
> +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabreauto/imximage.cfg,MX6SX"
> +# CONFIG_CMD_IMLS is not set
> +# CONFIG_CMD_FLASH is not set
> +CONFIG_CMD_GPIO=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_SPI_FLASH=y
> +CONFIG_SPI_FLASH_BAR=y
> +CONFIG_SPI_FLASH_STMICRO=y
> diff --git a/include/configs/mx6sxsabreauto.h b/include/configs/mx6sxsabreauto.h
> new file mode 100644
> index 0000000..2e739f9
> --- /dev/null
> +++ b/include/configs/mx6sxsabreauto.h
> @@ -0,0 +1,212 @@
> +/*
> + * Copyright 2014 Freescale Semiconductor, Inc.
> + *
> + * Configuration settings for the Freescale i.MX6SX Sabreauto board.
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#include "mx6_common.h"
> +
> +
> +/* Size of malloc() pool */
> +#define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M)
> +
> +#define CONFIG_BOARD_EARLY_INIT_F
> +#define CONFIG_BOARD_LATE_INIT
> +
> +#define CONFIG_MXC_UART
> +#define CONFIG_MXC_UART_BASE UART1_BASE
> +
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + "script=boot.scr\0" \
> + "image=zImage\0" \
> + "console=ttymxc0\0" \
> + "fdt_high=0xffffffff\0" \
> + "initrd_high=0xffffffff\0" \
> + "fdt_file=imx6sx-sabreauto.dtb\0" \
> + "fdt_addr=0x88000000\0" \
> + "boot_fdt=try\0" \
> + "ip_dyn=yes\0" \
> + "mmcdev=0\0" \
> + "mmcpart=1\0" \
> + "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
> + "mmcargs=setenv bootargs console=${console},${baudrate} " \
> + "root=${mmcroot}\0" \
> + "loadbootscript=" \
> + "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
> + "bootscript=echo Running bootscript from mmc ...; " \
> + "source\0" \
> + "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
> + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
> + "mmcboot=echo Booting from mmc ...; " \
> + "run mmcargs; " \
> + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
> + "if run loadfdt; then " \
> + "bootz ${loadaddr} - ${fdt_addr}; " \
> + "else " \
> + "if test ${boot_fdt} = try; then " \
> + "bootz; " \
> + "else " \
> + "echo WARN: Cannot load the DT; " \
> + "fi; " \
> + "fi; " \
> + "else " \
> + "bootz; " \
> + "fi;\0" \
> + "netargs=setenv bootargs console=${console},${baudrate} " \
> + "root=/dev/nfs " \
> + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
> + "netboot=echo Booting from net ...; " \
> + "run netargs; " \
> + "if test ${ip_dyn} = yes; then " \
> + "setenv get_cmd dhcp; " \
> + "else " \
> + "setenv get_cmd tftp; " \
> + "fi; " \
> + "${get_cmd} ${image}; " \
> + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
> + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
> + "bootz ${loadaddr} - ${fdt_addr}; " \
> + "else " \
> + "if test ${boot_fdt} = try; then " \
> + "bootz; " \
> + "else " \
> + "echo WARN: Cannot load the DT; " \
> + "fi; " \
> + "fi; " \
> + "else " \
> + "bootz; " \
> + "fi;\0"
> +
> +#define CONFIG_BOOTCOMMAND \
> + "mmc dev ${mmcdev};" \
> + "mmc dev ${mmcdev}; if mmc rescan; then " \
> + "if run loadbootscript; then " \
> + "run bootscript; " \
> + "else " \
> + "if run loadimage; then " \
> + "run mmcboot; " \
> + "else run netboot; " \
> + "fi; " \
> + "fi; " \
> + "else run netboot; fi"
> +
No comment, but I am gently asking if you have thought to switch to
distro environment. It makes board behaving in the same way.
> +/* Miscellaneous configurable options */
> +#define CONFIG_SYS_MEMTEST_START 0x80000000
> +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000)
> +
> +#define CONFIG_STACKSIZE SZ_128K
> +
> +/* Physical Memory Map */
> +#define CONFIG_NR_DRAM_BANKS 1
> +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
> +#define PHYS_SDRAM_SIZE SZ_2G
> +
> +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
> +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
> +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
> +
> +#define CONFIG_SYS_INIT_SP_OFFSET \
> + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
> +#define CONFIG_SYS_INIT_SP_ADDR \
> + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
> +
> +/* MMC Configuration */
> +#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR
> +
> +/* I2C Configs */
> +#define CONFIG_CMD_I2C
> +#define CONFIG_SYS_I2C
> +#define CONFIG_SYS_I2C_MXC
> +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
> +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
> +#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
> +#define CONFIG_SYS_I2C_SPEED 100000
> +
> +/* PMIC */
> +#define CONFIG_POWER
> +#define CONFIG_POWER_I2C
> +#define CONFIG_POWER_PFUZE100
> +#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
> +
> +/* NAND flash command */
> +#define CONFIG_CMD_NAND
> +#define CONFIG_CMD_NAND_TRIMFFS
> +
> +/* NAND stuff */
> +#define CONFIG_NAND_MXS
> +#define CONFIG_SYS_MAX_NAND_DEVICE 1
> +#define CONFIG_SYS_NAND_BASE 0x40000000
> +#define CONFIG_SYS_NAND_5_ADDR_CYCLE
> +#define CONFIG_SYS_NAND_ONFI_DETECTION
> +
> +/* DMA stuff, needed for GPMI/MXS NAND support */
> +#define CONFIG_APBH_DMA
> +#define CONFIG_APBH_DMA_BURST
> +#define CONFIG_APBH_DMA_BURST8
> +
> +/* Network */
> +#define CONFIG_CMD_PING
> +#define CONFIG_CMD_DHCP
> +#define CONFIG_CMD_MII
> +
> +#define CONFIG_FEC_MXC
> +#define CONFIG_MII
> +
> +#define IMX_FEC_BASE ENET2_BASE_ADDR
> +#define CONFIG_FEC_MXC_PHYADDR 0x0
> +
> +#define CONFIG_FEC_XCV_TYPE RGMII
> +#define CONFIG_ETHPRIME "FEC"
> +
> +#define CONFIG_PHYLIB
> +#define CONFIG_PHY_ATHEROS
> +
> +
> +#define CONFIG_CMD_USB
> +#ifdef CONFIG_CMD_USB
> +#define CONFIG_USB_EHCI
> +#define CONFIG_USB_EHCI_MX6
> +#define CONFIG_USB_STORAGE
> +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
> +#define CONFIG_USB_HOST_ETHER
> +#define CONFIG_USB_ETHER_ASIX
> +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
> +#define CONFIG_MXC_USB_FLAGS 0
> +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
> +#endif
> +
> +#define CONFIG_IMX_THERMAL
> +
> +#define CONFIG_CMD_TIME
> +
> +#define CONFIG_FSL_QSPI
> +#ifdef CONFIG_FSL_QSPI
> +#define CONFIG_CMD_SF
> +#define CONFIG_SYS_FSL_QSPI_AHB
> +#define CONFIG_SF_DEFAULT_BUS 0
> +#define CONFIG_SF_DEFAULT_CS 0
> +#define CONFIG_SF_DEFAULT_SPEED 40000000
> +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
> +#define FSL_QSPI_FLASH_SIZE SZ_32M
> +#define FSL_QSPI_FLASH_NUM 2
> +#endif
> +
> +#define CONFIG_ENV_OFFSET (8 * SZ_64K)
> +#define CONFIG_ENV_SIZE SZ_8K
> +#define CONFIG_ENV_IS_IN_MMC
> +
> +#define CONFIG_SYS_FSL_USDHC_NUM 2
> +#if defined(CONFIG_ENV_IS_IN_MMC)
> +#define CONFIG_SYS_MMC_ENV_DEV 0 /*USDHC3*/
> +#endif
> +
> +#define CONFIG_PCA953X
> +#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x30, 8}, {0x32, 8}, {0x34, 8} }
> +
> +#endif /* __CONFIG_H */
>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list