[U-Boot] Problem with mounting a jffs2 partition on flash.

[Bakhvalov, Denis (Nokia - PL/Wroclaw)]

$ quartus_hps -c 1 -o PV -a 0x0 u-boot-with-spl.sfp.bin
// here ".bin" because current programmer requires so. I think it shouldn't be a problem.

>From manual:
"HPS Flash Programmer
The utility accepts a Binary File with a required ".bin" extension.
The HPS flash programmer command-line syntax is:
quartus_hps <options> <file.bin>"

Info: Version 13.1.0 Build 162 10/23/2013 SJ Full Version

After that I power off/on the unit and nothing happened.
I also compared md5 while copying - everything should be ok.

I tried it 2 times with no success:
Looks like unit is no booting.
No output in the console is visible.

If I change the images back (that is currently in official release) - at least bootloader pass and u-boot is also launching.

Does it mean that there is something wrong with SPL configuration?
Or maybe I need some patches from altera in order to make them working?
Because I can see some traces of applied patches in the svn history.

Best regards,
Denis Bakhvalov