[U-Boot] [PATCH 13/27] omap-common: clocks-common: Setup USB DPLL when MUSB is in use

[Paul Kocialkowski]

On (at least) OMAP4, the USB DPLL is required to be setup for the internal PHY
to work properly. The internal PHY is used by default with the MUSB USB OTG
controller.

Signed-off-by: Paul Kocialkowski <contact at paulk.fr>
---
 arch/arm/cpu/armv7/omap-common/clocks-common.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c
index e28b795..1ba9995 100644
--- a/arch/arm/cpu/armv7/omap-common/clocks-common.c
+++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c
@@ -339,7 +339,8 @@ void configure_mpu_dpll(void)
 	debug("MPU DPLL locked\n");
 }
 
-#if defined(CONFIG_USB_EHCI_OMAP) || defined(CONFIG_USB_XHCI_OMAP)
+#if defined(CONFIG_USB_EHCI_OMAP) || defined(CONFIG_USB_XHCI_OMAP) || \
+	defined(CONFIG_USB_MUSB_OMAP2PLUS)
 static void setup_usb_dpll(void)
 {
 	const struct dpll_params *params;
@@ -406,7 +407,8 @@ static void setup_dplls(void)
 	/* MPU dpll */
 	configure_mpu_dpll();
 
-#if defined(CONFIG_USB_EHCI_OMAP) || defined(CONFIG_USB_XHCI_OMAP)
+#if defined(CONFIG_USB_EHCI_OMAP) || defined(CONFIG_USB_XHCI_OMAP) || \
+	defined(CONFIG_USB_MUSB_OMAP2PLUS)
 	setup_usb_dpll();
 #endif
 	params = get_ddr_dpll_params(*dplls_data);
-- 
2.6.4