[U-Boot] [PATCH 2/2] imx: mx6ul/sx: Fix issue in LCDIF clock dividers calculation

Stefano Babic sbabic at denx.de
Tue Feb 2 21:26:28 CET 2016



On 26/01/2016 15:01, Ye Li wrote:
> The checking with max frequency supported is not correct, because the temp
> is calculated by max pre and post dividers. We can decrease any divider to
> meet the max frequency limitation. Actually, the calculation below the codes
> is doing this way to find best pre and post dividers.
> 
> Signed-off-by: Ye Li <ye.li at nxp.com>
> ---
>  arch/arm/cpu/armv7/mx6/clock.c |    4 ----
>  1 files changed, 0 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
> index 007204d..88380a6 100644
> --- a/arch/arm/cpu/armv7/mx6/clock.c
> +++ b/arch/arm/cpu/armv7/mx6/clock.c
> @@ -638,10 +638,6 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq)
>  	}
>  
>  	temp = freq * max_pred * max_postd;
> -	if (temp > max) {
> -		puts("Please decrease freq, too large!\n");
> -		return;
> -	}
>  	if (temp < min) {
>  		/*
>  		 * Register: PLL_VIDEO
> 
Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list