[U-Boot] [PATCH] imx: mx6sxsabresd: Add MCIMX28LCD display support
Stefano Babic
sbabic at denx.de
Tue Feb 2 21:27:44 CET 2016
On 26/01/2016 15:09, Ye Li wrote:
> The i.MX6SX SABRESD board supports MCIMX28LCD (800x480x24) at LCDIF1
> port, enable this display feature by adding relevant BSP codes
> and configurations.
>
> Signed-off-by: Ye Li <ye.li at nxp.com>
> ---
> board/freescale/mx6sxsabresd/mx6sxsabresd.c | 61 +++++++++++++++++++++++++++
> include/configs/mx6sxsabresd.h | 20 +++++++++
> 2 files changed, 81 insertions(+), 0 deletions(-)
>
> diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
> index 56dc020..886c883 100644
> --- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c
> +++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
> @@ -59,6 +59,9 @@ DECLARE_GLOBAL_DATA_PTR;
> PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
> PAD_CTL_ODE)
>
> +#define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \
> + PAD_CTL_PKE | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm)
> +
> int dram_init(void)
> {
> gd->ram_size = PHYS_SDRAM_SIZE;
> @@ -458,6 +461,60 @@ int board_qspi_init(void)
> }
> #endif
>
> +#ifdef CONFIG_VIDEO_MXS
> +static iomux_v3_cfg_t const lcd_pads[] = {
> + MX6_PAD_LCD1_CLK__LCDIF1_CLK | MUX_PAD_CTRL(LCD_PAD_CTRL),
> + MX6_PAD_LCD1_ENABLE__LCDIF1_ENABLE | MUX_PAD_CTRL(LCD_PAD_CTRL),
> + MX6_PAD_LCD1_HSYNC__LCDIF1_HSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL),
> + MX6_PAD_LCD1_VSYNC__LCDIF1_VSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL),
> + MX6_PAD_LCD1_DATA00__LCDIF1_DATA_0 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> + MX6_PAD_LCD1_DATA01__LCDIF1_DATA_1 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> + MX6_PAD_LCD1_DATA02__LCDIF1_DATA_2 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> + MX6_PAD_LCD1_DATA03__LCDIF1_DATA_3 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> + MX6_PAD_LCD1_DATA04__LCDIF1_DATA_4 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> + MX6_PAD_LCD1_DATA05__LCDIF1_DATA_5 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> + MX6_PAD_LCD1_DATA06__LCDIF1_DATA_6 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> + MX6_PAD_LCD1_DATA07__LCDIF1_DATA_7 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> + MX6_PAD_LCD1_DATA08__LCDIF1_DATA_8 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> + MX6_PAD_LCD1_DATA09__LCDIF1_DATA_9 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> + MX6_PAD_LCD1_DATA10__LCDIF1_DATA_10 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> + MX6_PAD_LCD1_DATA11__LCDIF1_DATA_11 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> + MX6_PAD_LCD1_DATA12__LCDIF1_DATA_12 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> + MX6_PAD_LCD1_DATA13__LCDIF1_DATA_13 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> + MX6_PAD_LCD1_DATA14__LCDIF1_DATA_14 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> + MX6_PAD_LCD1_DATA15__LCDIF1_DATA_15 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> + MX6_PAD_LCD1_DATA16__LCDIF1_DATA_16 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> + MX6_PAD_LCD1_DATA17__LCDIF1_DATA_17 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> + MX6_PAD_LCD1_DATA18__LCDIF1_DATA_18 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> + MX6_PAD_LCD1_DATA19__LCDIF1_DATA_19 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> + MX6_PAD_LCD1_DATA20__LCDIF1_DATA_20 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> + MX6_PAD_LCD1_DATA21__LCDIF1_DATA_21 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> + MX6_PAD_LCD1_DATA22__LCDIF1_DATA_22 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> + MX6_PAD_LCD1_DATA23__LCDIF1_DATA_23 | MUX_PAD_CTRL(LCD_PAD_CTRL),
> + MX6_PAD_LCD1_RESET__GPIO3_IO_27 | MUX_PAD_CTRL(NO_PAD_CTRL),
> +
> + /* Use GPIO for Brightness adjustment, duty cycle = period */
> + MX6_PAD_SD1_DATA2__GPIO6_IO_4 | MUX_PAD_CTRL(NO_PAD_CTRL),
> +};
> +
> +static int setup_lcd(void)
> +{
> + enable_lcdif_clock(LCDIF1_BASE_ADDR);
> +
> + imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
> +
> + /* Reset the LCD */
> + gpio_direction_output(IMX_GPIO_NR(3, 27) , 0);
> + udelay(500);
> + gpio_direction_output(IMX_GPIO_NR(3, 27) , 1);
> +
> + /* Set Brightness to high */
> + gpio_direction_output(IMX_GPIO_NR(6, 4) , 1);
> +
> + return 0;
> +}
> +#endif
> +
> int board_init(void)
> {
> /* Address of boot parameters */
> @@ -471,6 +528,10 @@ int board_init(void)
> board_qspi_init();
> #endif
>
> +#ifdef CONFIG_VIDEO_MXS
> + setup_lcd();
> +#endif
> +
> return 0;
> }
>
> diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
> index 0aec296..29e9c08 100644
> --- a/include/configs/mx6sxsabresd.h
> +++ b/include/configs/mx6sxsabresd.h
> @@ -36,6 +36,7 @@
> "fdt_addr=0x88000000\0" \
> "boot_fdt=try\0" \
> "ip_dyn=yes\0" \
> + "videomode=video=ctfb:x:800,y:480,depth:24,pclk:29850,le:89,ri:164,up:23,lo:10,hs:10,vs:10,sync:0,vmode:0\0" \
> "mmcdev=2\0" \
> "mmcpart=1\0" \
> "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
> @@ -195,6 +196,25 @@
> #define FSL_QSPI_FLASH_NUM 2
> #endif
>
> +#ifndef CONFIG_SPL_BUILD
> +#define CONFIG_VIDEO
> +#ifdef CONFIG_VIDEO
> +#define CONFIG_CFB_CONSOLE
> +#define CONFIG_VIDEO_MXS
> +#define CONFIG_VIDEO_LOGO
> +#define CONFIG_VIDEO_SW_CURSOR
> +#define CONFIG_VGA_AS_SINGLE_DEVICE
> +#define CONFIG_SYS_CONSOLE_IS_IN_ENV
> +#define CONFIG_SPLASH_SCREEN
> +#define CONFIG_SPLASH_SCREEN_ALIGN
> +#define CONFIG_CMD_BMP
> +#define CONFIG_BMP_16BPP
> +#define CONFIG_VIDEO_BMP_RLE8
> +#define CONFIG_VIDEO_BMP_LOGO
> +#define MXS_LCDIF_BASE MX6SX_LCDIF1_BASE_ADDR
> +#endif
> +#endif
> +
> #define CONFIG_ENV_OFFSET (8 * SZ_64K)
> #define CONFIG_ENV_SIZE SZ_8K
> #define CONFIG_ENV_IS_IN_MMC
>
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list