[U-Boot] [PATCH] arm: socfpga: Enable ethernet PHY configuration to RGMII again

[Simon Glass]

Hi,

On 11 February 2016 at 08:54, Stefan Roese <sr at denx.de> wrote:
> On 11.02.2016 16:49, Marek Vasut wrote:
>>
>> On 02/11/2016 04:45 PM, Stefan Roese wrote:
>>>
>>> With commit c32a6fd0 [net: Don't call board/cpu_eth_init() with driver
>>> model], cpu_eth_init() is not called on SoCFPGA any more. Since this
>>> function configures the internal PHY interface to RGMII (via the physel_X
>>> bits), its still needed. So lets rename this function and call it in
>>> arch_early_init_r().
>>>
>>> Tested on socfpga_sr1500.
>>>
>>> Signed-off-by: Stefan Roese <sr at denx.de>
>>> Cc: Simon Glass <sjg at chromium.org>
>>> Cc: Dinh Nguyen <dinguyen at opensource.altera.com>
>>> Cc: Marek Vasut <marex at denx.de>
>>> ---
>>>   arch/arm/mach-socfpga/misc.c | 6 +++++-
>>>   1 file changed, 5 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm/mach-socfpga/misc.c b/arch/arm/mach-socfpga/misc.c
>>> index 9b43b92..2b1cd4a 100644
>>> --- a/arch/arm/mach-socfpga/misc.c
>>> +++ b/arch/arm/mach-socfpga/misc.c
>>> @@ -104,7 +104,7 @@ static void dwmac_deassert_reset(const unsigned int
>>> of_reset_id)
>>>         socfpga_per_reset(reset, 0);
>>>   }
>>
>>
>> I just sent and applied very similar patch, can you try
>> u-boot-socfpga/master and see if it works for you?
>
>
> Done and works just fine. So please feel free to upstream your patch
> version.

Can this be done in the driver? You have a device tree representation
I think. If you are using the compat list in fdtdec.c then it suggests
that you need a driver.

Regards,
Simon