[U-Boot] [PATCH v2 05/12] rockchip: rk3288: Add clock support for the gmac ethernet interface
Sjoerd Simons
sjoerd.simons at collabora.co.uk
Sun Feb 28 22:24:59 CET 2016
Setup the clocks for the gmac ethernet interface. This assumes the mac
clock is fed by an external clock which is common on RK3288 based
devices.
Signed-off-by: Sjoerd Simons <sjoerd.simons at collabora.co.uk>
---
Changes in v2: None
arch/arm/include/asm/arch-rockchip/cru_rk3288.h | 17 +++++++++++++++++
drivers/clk/clk_rk3288.c | 14 ++++++++++++++
2 files changed, 31 insertions(+)
diff --git a/arch/arm/include/asm/arch-rockchip/cru_rk3288.h b/arch/arm/include/asm/arch-rockchip/cru_rk3288.h
index d2690c7..8a8ca9c 100644
--- a/arch/arm/include/asm/arch-rockchip/cru_rk3288.h
+++ b/arch/arm/include/asm/arch-rockchip/cru_rk3288.h
@@ -90,6 +90,23 @@ enum {
SDIO0_DIV_MASK = 0x3f,
};
+/* CRU_CLKSEL21_CON */
+enum {
+ MAC_DIV_CON_SHIFT = 0xf,
+ MAC_DIV_CON_MASK = 0x1f,
+
+ RMII_EXTCLK_SHIFT = 4,
+ RMII_EXTCLK_MASK = 1,
+ RMII_EXTCLK_SELECT_INT_DIV_CLK = 0,
+ RMII_EXTCLK_SELECT_EXT_CLK = 1,
+
+ EMAC_PLL_SHIFT = 0,
+ EMAC_PLL_MASK = 0x3,
+ EMAC_PLL_SELECT_NEW = 0x0,
+ EMAC_PLL_SELECT_CODEC = 0x1,
+ EMAC_PLL_SELECT_GENERAL = 0x2,
+};
+
/* CRU_CLKSEL25_CON */
enum {
SPI1_PLL_SHIFT = 0xf,
diff --git a/drivers/clk/clk_rk3288.c b/drivers/clk/clk_rk3288.c
index 2a85e93..a110a1c 100644
--- a/drivers/clk/clk_rk3288.c
+++ b/drivers/clk/clk_rk3288.c
@@ -326,6 +326,17 @@ static int pll_para_config(ulong freq_hz, struct pll_div *div, uint *ext_div)
return 0;
}
+static int rockchip_mac_set_clk(struct rk3288_cru *cru,
+ int periph, uint freq)
+{
+ /* Assuming mac_clk is fed by an external clock */
+ rk_clrsetreg(&cru->cru_clksel_con[21],
+ RMII_EXTCLK_MASK << RMII_EXTCLK_SHIFT,
+ RMII_EXTCLK_SELECT_EXT_CLK << RMII_EXTCLK_SHIFT);
+
+ return 0;
+}
+
static int rockchip_vop_set_clk(struct rk3288_cru *cru, struct rk3288_grf *grf,
int periph, unsigned int rate_hz)
{
@@ -759,6 +770,9 @@ static ulong rk3288_set_periph_rate(struct udevice *dev, int periph, ulong rate)
new_rate = rockchip_spi_set_clk(cru, gclk_rate, periph, rate);
break;
#ifndef CONFIG_SPL_BUILD
+ case SCLK_MAC:
+ new_rate = rockchip_mac_set_clk(priv->cru, periph, rate);
+ break;
case DCLK_VOP0:
case DCLK_VOP1:
new_rate = rockchip_vop_set_clk(cru, priv->grf, periph, rate);
--
2.7.0
More information about the U-Boot
mailing list