[U-Boot] [PATCH] sunxi: power: add support for sy8106a driver

[Peter Korsgaard]

>>>>> "Hans" == Hans de Goede <hdegoede at redhat.com> writes:

 > From: Jelle van der Waa <jelle at vdwaa.nl>
 > SY8106A is a PMIC which is used on the Allwinner
 > H3 Orange Pi Pc board. The VOUT1_SEL register is
 > implemented to set thea default V-CPU voltage to 1200 mV.

 > Signed-off-by: Jelle van der Waa <jelle at vdwaa.nl>
 > [hdegoede at redhat.com: Polish Kconfig parts a bit]
 > Signed-off-by: Hans de Goede <hdegoede at redhat.com>
 > ---
 >  board/sunxi/Kconfig            |  6 +++++-
 >  board/sunxi/board.c            |  5 +++++
 >  configs/orangepi_pc_defconfig  |  1 -
 >  drivers/power/Kconfig          | 18 +++++++++++++++++-
 >  drivers/power/Makefile         |  1 +
 >  drivers/power/sy8106a.c        | 23 +++++++++++++++++++++++
 >  include/configs/sunxi-common.h |  6 ++++--
 >  include/sy8106a.h              |  5 +++++
 >  8 files changed, 60 insertions(+), 5 deletions(-)
 >  create mode 100644 drivers/power/sy8106a.c
 >  create mode 100644 include/sy8106a.h

 > diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
 > index a334aa3..449d9dd 100644
 > --- a/board/sunxi/Kconfig
 > +++ b/board/sunxi/Kconfig
 > @@ -372,11 +372,15 @@ config I2C3_ENABLE
 >  	See I2C0_ENABLE help text.
 >  endif
 
 > +if SUNXI_GEN_SUN6I
 >  config R_I2C_ENABLE
 >  	bool "Enable the PRCM I2C/TWI controller"
 > -	default n
 > +	# This is used for the pmic on H3
 > +	default y if MACH_SUN8I_H3
 > +	default n if !MACH_SUN8I_H3

Default is 'n', so the last line can be removed.


-- 
Bye, Peter Korsgaard