[U-Boot] [PATCH] OMAP3: am3517_evm: SD/MMC boot with uEnv.txt, zImage, and FDT

[Derald D. Woods]

On 02/08/2016 02:45 PM, Tom Rini wrote:
> On Sun, Feb 07, 2016 at 08:54:47PM -0600, Derald D. Woods wrote:
>
>> Boot with the Linux zImage and am3517-evm.dtb pair, when SD/MMC media
>> is present. This behavior can be overridden by creating a 'uEnv.txt'
>> file with 'uenvcmd' defined.
>>
>> To boot an existing 'uImage', create the following 'uEnv.txt':
>>
>> [start]-----------------------------------------------------------------
>>
>> loaduimage=fatload mmc 0:1 ${loadaddr} ${bootfile}
>> uenvcmd=run loaduimage; run mmcargs; bootm ${loadaddr}
>>
>> [end]-------------------------------------------------------------------
>>
>> Inspired by similar patches, for other OMAP3 boards, from EEWiki
>> - https://github.com/eewiki/u-boot-patches/tree/master/v2016.01
>>
>> Signed-off-by: Derald D. Woods <woods.technical at gmail.com>
> Reviewed-by: Tom Rini <trini at konsulko.com>
>

Gentle nudge.

I know that there is not much support for this board and its variants. 
That being said, one can still buy the SOM's at Digi-Key and other 
outlets. The Zoom AM3517 eXperimenter, which I have, is still a decent 
platform for development. So for those who may still care, it would be 
good to keep this updated.

Derald