[U-Boot] [PATCH] net: fix wrong initialization in davinci-emac driver

[Anatolij Gustschin]

From: Vishwas Srivastava <vishu.kernel at gmail.com>

emac module of the davinci platform supports only 8 tx and 8
rx channels (total 16). emac driver for davinci platform,
however, while doing initialization of the dma descriptor
head pointers, wrongly initializes the 16 head pointers
(instead of  8) for tx dma and 16 head pointers (insted of 8)
for rx dma, which is wrong. The result is, that this register
initilization spills over the other registers which was not
intended and is undesirable. This patch fixes this problem.

Signed-off-by: Vishwas Srivastava <vishu.kernel at gmail.com>
CC: Joe Hershberger <joe.hershberger at ni.com>
Acked-by: Joe Hershberger <joe.hershberger at ni.com>
Signed-off-by: Anatolij Gustschin <agust at denx.de>
---

Changes for v4:
	- slightly edit the commit message
	- prepare properly formated patch

Changes for v3:
	- Added the missing patch part of v2

Changes for v2:
	- cleaned up the style format
	- addressed various comments given by Joe

 drivers/net/davinci_emac.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 92c3dca..6f2dc8d 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -459,11 +459,11 @@ static int davinci_eth_open(struct eth_device *dev, bd_t *bis)
 
 	/* Set DMA 8 TX / 8 RX Head pointers to 0 */
 	addr = &adap_emac->TX0HDP;
-	for(cnt = 0; cnt < 16; cnt++)
+	for (cnt = 0; cnt < 8; cnt++)
 		writel(0, addr++);
 
 	addr = &adap_emac->RX0HDP;
-	for(cnt = 0; cnt < 16; cnt++)
+	for (cnt = 0; cnt < 8; cnt++)
 		writel(0, addr++);
 
 	/* Clear Statistics (do this before setting MacControl register) */
-- 
1.7.9.5