[U-Boot] [PATCH v2 17/18] board: Add Qualcomm Dragonboard 410C support

[Mateusz Kulikowski]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

Hi,


On 31.01.2016 16:17, Simon Glass wrote:
> On 24 January 2016 at 13:53, Mateusz Kulikowski
> <mateusz.kulikowski at gmail.com> wrote:
[...]

> 
> For the readme, can you please do a patch to add a few more things?
> 
> - How to enter fastboot mode

I've added it (sorry, it was kind-of obvious for me :) ).

> - How pressing power on reset works - it didn't do anything for me

For now it's not very helpful as by pressing vol- you end up in fastboot first.

But, if you then use fastboot to load u-boot it will stop autoboot command
(In case you don't have serial port).

=========================
U-Boot 2016.03-rc1-00047-gffd9b24 (Feb 07 2016 - 22:03:00 +0100)
Qualcomm-DragonBoard 410C

DRAM:  986 MiB
MMC:   sdhci at 07824000: 0, sdhci at 07864000: 1
Using default environment

In:    serial at 78b0000
Out:   serial at 78b0000
Err:   serial at 78b0000
Power button pressed - dropping to console.
Net:   Net Initialization Skipped
No ethernet found.
dragonboard410c => 
========================

Once I enable UDC controller it will launch fastboot/dfu mode.
This will be especially useful when U-Boot will replace little-kernel 
(that's my goal eventually).


Regards,
Mateusz

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2

iQEcBAEBCAAGBQJWt7GVAAoJELvtohmVtQzBmoIH/iFrAOtd27Ui98PIv1xVoU+V
EwjVuLFVzRxQPAvjb7fMQQ/dZgz29dfgA5eTN5h1Lzs4KM+cQd8H++pNBxwrW8LM
32K9dj9pRVKRsS99jeVjulbOPnIRNRvRqsC4SpBh7iMUATpE/mjY4ELz0y5IY6/h
94TlcNlJk/gUZE+/Nk6XGzpgGV9s5tXjpOVqKvEAQyXju/EuXxUv1AcB54JrZfAT
5w65sHkFo7whdldX8Wub3rJG/BoSR+K1Wxz546zYswSbcbzK3lDN0SJ5Fa+ks8qb
5j1PCV3aP3rQ3iD/md5HdDd5InILNxvNZO9gQweCbYYhnPCXUWdHuVkU7pcu6rA=
=AkEV
-----END PGP SIGNATURE-----