[U-Boot] [PATCH v4 0/6] add dma uclass implementation and adopt ti-edma3 to it

[Jagan Teki]

On 15 February 2016 at 15:31, Mugunthan V N <mugunthanvnm at ti.com> wrote:
> This patch series enables adds support for dma driver model and
> to adopt driver model. This has been tested on am437x-sk evm
> (logs [1]).
> also pushed a branch for testing [2]
>
> [1]: http://pastebin.ubuntu.com/15073097/
> [2]: git://git.ti.com/~mugunthanvnm/ti-u-boot/mugunth-ti-u-boot.git dma-v4
>
> changes from v3->v4:
> * Moved *_priv updation from .ofdata_to_platdata to .probe
>
> changes from v2->v3:
> * Simplified device find from uclass_find_first_device() and
>   device_probe() to uclass_first_device() so that all dma
>   devices auto probes.
> * Changed ENODEV to EPROTONOSUPPORT which is appropriate here
> * Added documentation for return values
>
> changes from initial->v2:
> * changed config_dm_dma to config_dma.
> * removed un-wanted enums.
> * added dma_get_device().
> * removed post_bind in uclass driver and added device_probe
>   in dma_get_device()
>
> Mugunthan V N (6):
>   dm: implement a DMA uclass
>   dma: Kconfig: Add TI_EDMA3 entry
>   sf: spi_flash: use dma to copy data from mmap region if platform
>     supports
>   spi: ti_qspi: compile out spi_flash_copy_mmap when CONFIG_DMA is
>     defined
>   drivers: dma: ti-edma3: convert driver to adopt driver model
>   defconfig: am437x_sk_evm: enable dma driver model

Reviewed-by: Jagan Teki <jteki at openedev.com>

-- 
Jagan.