[U-Boot] [PATCH v2 09/18] ehci-ci.h: drop generic USBCMD fields

[Mateusz Kulikowski]

Use definitions from ehci.h instead.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski at gmail.com>
Acked-by: Marek Vasut <marex at denx.de>
Tested-by: Simon Glass <sjg at chromium.org>

---

Changes in v3: None
Changes in v2:
- Add Acked-by

Changes in v1: None

 drivers/usb/host/ehci-mpc512x.c | 4 ++--
 include/usb/ehci-ci.h           | 4 ----
 2 files changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/host/ehci-mpc512x.c b/drivers/usb/host/ehci-mpc512x.c
index 4b50ac8..bb4f461 100644
--- a/drivers/usb/host/ehci-mpc512x.c
+++ b/drivers/usb/host/ehci-mpc512x.c
@@ -93,7 +93,7 @@ static int reset_usb_controller(volatile struct usb_ehci *ehci)
 	unsigned int i;
 
 	/* Command a reset of the USB Controller */
-	out_be32(&(ehci->usbcmd), EHCI_FSL_USBCMD_RST);
+	out_be32(&(ehci->usbcmd), CMD_RESET);
 
 	/* Wait for the reset process to finish */
 	for (i = 65535 ; i > 0 ; i--) {
@@ -101,7 +101,7 @@ static int reset_usb_controller(volatile struct usb_ehci *ehci)
 		 * The host will set this bit to zero once the
 		 * reset process is complete
 		 */
-		if ((in_be32(&(ehci->usbcmd)) & EHCI_FSL_USBCMD_RST) == 0)
+		if ((in_be32(&(ehci->usbcmd)) & CMD_RESET) == 0)
 			return 0;
 	}
 
diff --git a/include/usb/ehci-ci.h b/include/usb/ehci-ci.h
index 305b180..586d32a 100644
--- a/include/usb/ehci-ci.h
+++ b/include/usb/ehci-ci.h
@@ -97,10 +97,6 @@
 #define INTR_DATA_PULSING_EN	(0x1<<30)
 #define INTSTS_MASK		(0x00ff0000)
 
-/* USBCMD Bits of interest */
-#define EHCI_FSL_USBCMD_RST	(1 <<  1)
-#define EHCI_FSL_USBCMD_RS	(1 <<  0)
-
 #define  INTERRUPT_ENABLE_BITS_MASK  \
 		(INTR_USB_ID_EN		| \
 		INTR_1MS_TIMER_EN	| \
-- 
2.5.0