[U-Boot] [PATCH 3/5] board/BuR: move everything possible from board's headerfile to KConfig
Hannes Schmelzer
oe5hpm at oevsv.at
Fri Feb 19 12:09:44 CET 2016
We drop everything possible things from board headerfiles and replace
this functionality with responsible settings in Kconfig (_defconfig).
Signed-off-by: Hannes Schmelzer <oe5hpm at oevsv.at>
---
configs/kwb_defconfig | 10 ++++++++++
configs/tseries_mmc_defconfig | 10 ++++++++++
configs/tseries_nand_defconfig | 11 +++++++++++
configs/tseries_spi_defconfig | 13 +++++++++++++
include/configs/bur_am335x_common.h | 6 ------
include/configs/kwb.h | 7 -------
include/configs/tseries.h | 9 ---------
7 files changed, 44 insertions(+), 22 deletions(-)
diff --git a/configs/kwb_defconfig b/configs/kwb_defconfig
index 7bdc6b6..4d2aa6c 100644
--- a/configs/kwb_defconfig
+++ b/configs/kwb_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
CONFIG_TARGET_KWB=y
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
+CONFIG_HUSH_PARSER=y
# CONFIG_CMD_BOOTD is not set
# CONFIG_CMD_BOOTM is not set
# CONFIG_CMD_GO is not set
@@ -13,9 +14,18 @@ CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
# CONFIG_CMD_NFS is not set
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_NETCONSOLE=y
CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_USB_MUSB_HOST=y
+CONFIG_USB_STORAGE=y
diff --git a/configs/tseries_mmc_defconfig b/configs/tseries_mmc_defconfig
index 15cfab4..168e379 100644
--- a/configs/tseries_mmc_defconfig
+++ b/configs/tseries_mmc_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
CONFIG_TARGET_TSERIES=y
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,EMMC_BOOT"
+CONFIG_HUSH_PARSER=y
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_XIMG is not set
@@ -10,9 +11,18 @@ CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,EMMC_BOOT"
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
# CONFIG_CMD_NFS is not set
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_NETCONSOLE=y
CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_USB_MUSB_HOST=y
+CONFIG_USB_STORAGE=y
diff --git a/configs/tseries_nand_defconfig b/configs/tseries_nand_defconfig
index b75efd6..8151caf 100644
--- a/configs/tseries_nand_defconfig
+++ b/configs/tseries_nand_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
CONFIG_TARGET_TSERIES=y
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND"
+CONFIG_HUSH_PARSER=y
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_XIMG is not set
@@ -10,9 +11,19 @@ CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND"
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_NAND=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
# CONFIG_CMD_NFS is not set
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_NETCONSOLE=y
CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_USB_MUSB_HOST=y
+CONFIG_USB_STORAGE=y
diff --git a/configs/tseries_spi_defconfig b/configs/tseries_spi_defconfig
index 0390691..901c55e 100644
--- a/configs/tseries_spi_defconfig
+++ b/configs/tseries_spi_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
CONFIG_TARGET_TSERIES=y
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT"
+CONFIG_HUSH_PARSER=y
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_XIMG is not set
@@ -10,11 +11,23 @@ CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT"
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
# CONFIG_CMD_NFS is not set
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_NETCONSOLE=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_USB_MUSB_HOST=y
+CONFIG_USB_STORAGE=y
diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h
index e666933..8429cf5 100644
--- a/include/configs/bur_am335x_common.h
+++ b/include/configs/bur_am335x_common.h
@@ -24,7 +24,6 @@
"setenv stdout nc;setenv stdin nc;setenv stderr nc\0"
#define CONFIG_PREBOOT "run brdefaultip"
-#define CONFIG_CMD_TIME
#define CONFIG_AM33XX
@@ -53,19 +52,16 @@
#define CONFIG_BAUDRATE 115200
/* Network defines */
-#define CONFIG_CMD_DHCP
#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */
#define CONFIG_BOOTP_SEND_HOSTNAME
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_NET_RETRY_COUNT 2
-#define CONFIG_CMD_PING
#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */
#define CONFIG_MII /* Required in net/eth.c */
#define CONFIG_PHYLIB
#define CONFIG_PHY_NATSEMI
/* Network console */
-#define CONFIG_NETCONSOLE 1
#define CONFIG_BOOTP_MAY_FAIL /* if we don't have DHCP environment */
/*
* SPL related defines. The Public RAM memory map the ROM defines the
@@ -105,7 +101,6 @@
#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
#define CONFIG_SYS_I2C_OMAP24XX
-#define CONFIG_CMD_I2C
/* GPIO */
#define CONFIG_OMAP_GPIO
/*
@@ -119,7 +114,6 @@
* console baudrate of 115200 and use the default baud rate table.
*/
#define CONFIG_SYS_MALLOC_LEN (5120 << 10)
-#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_CONSOLE_INFO_QUIET
#define CONFIG_ENV_OVERWRITE /* Overwrite ethaddr / serial# */
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
diff --git a/include/configs/kwb.h b/include/configs/kwb.h
index 45253b8..e570c71 100644
--- a/include/configs/kwb.h
+++ b/include/configs/kwb.h
@@ -106,7 +106,6 @@ BUR_COMMON_ENV \
#undef CONFIG_BOOTM_NETBSD
#undef CONFIG_BOOTM_PLAN9
#undef CONFIG_BOOTM_RTEMS
-#undef CONFIG_CMD_CRC32
/* Support both device trees and ATAGs. */
#define CONFIG_OF_LIBFDT
@@ -122,17 +121,11 @@ BUR_COMMON_ENV \
#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
/* attention! not only for gadget, enables also highspeed in hostmode */
#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_MUSB_HOST
#define CONFIG_AM335X_USB0
#define CONFIG_AM335X_USB0_MODE MUSB_HOST
#define CONFIG_AM335X_USB1
#define CONFIG_AM335X_USB1_MODE MUSB_HOST
-#ifdef CONFIG_USB_MUSB_HOST
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#endif /* CONFIG_USB_MUSB_HOST */
-
#undef CONFIG_ENV_IS_NOWHERE
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0
diff --git a/include/configs/tseries.h b/include/configs/tseries.h
index 93e3454..2d352ed 100644
--- a/include/configs/tseries.h
+++ b/include/configs/tseries.h
@@ -204,7 +204,6 @@ MMCARGS
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x8000000
#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_CMD_NAND
/* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
#define CONFIG_NAND_OMAP_ELM
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
@@ -249,23 +248,15 @@ MMCARGS
#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
/* attention! not only for gadget, enables also highspeed in hostmode */
#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_MUSB_HOST
#define CONFIG_AM335X_USB0
#define CONFIG_AM335X_USB0_MODE MUSB_HOST
#define CONFIG_AM335X_USB1
#define CONFIG_AM335X_USB1_MODE MUSB_HOST
-#ifdef CONFIG_USB_MUSB_HOST
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#endif /* CONFIG_USB_MUSB_HOST */
-
#if defined(CONFIG_SPI_BOOT)
/* McSPI IP block */
#define CONFIG_SPI
#define CONFIG_OMAP3_SPI
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_SF
#define CONFIG_SF_DEFAULT_SPEED 24000000
#define CONFIG_SPL_SPI_SUPPORT
--
1.9.1
More information about the U-Boot
mailing list