[U-Boot] [PATCH] arm: socfpga: Enable ethernet PHY configuration to RGMII again

[Marek Vasut]

On 02/11/2016 04:45 PM, Stefan Roese wrote:
> With commit c32a6fd0 [net: Don't call board/cpu_eth_init() with driver
> model], cpu_eth_init() is not called on SoCFPGA any more. Since this
> function configures the internal PHY interface to RGMII (via the physel_X
> bits), its still needed. So lets rename this function and call it in
> arch_early_init_r().
> 
> Tested on socfpga_sr1500.
> 
> Signed-off-by: Stefan Roese <sr at denx.de>
> Cc: Simon Glass <sjg at chromium.org>
> Cc: Dinh Nguyen <dinguyen at opensource.altera.com>
> Cc: Marek Vasut <marex at denx.de>
> ---
>  arch/arm/mach-socfpga/misc.c | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-socfpga/misc.c b/arch/arm/mach-socfpga/misc.c
> index 9b43b92..2b1cd4a 100644
> --- a/arch/arm/mach-socfpga/misc.c
> +++ b/arch/arm/mach-socfpga/misc.c
> @@ -104,7 +104,7 @@ static void dwmac_deassert_reset(const unsigned int of_reset_id)
>  	socfpga_per_reset(reset, 0);
>  }

I just sent and applied very similar patch, can you try
u-boot-socfpga/master and see if it works for you?

Thanks!