[U-Boot] [PATCH 2/2] Add support the Avionic Design Meerkat COM and Kein Baseboard

[Julian Scheel]

Hi Stephen,

On 23.02.2016 19:03, Stephen Warren wrote:
> On 02/23/2016 05:59 AM, Julian Scheel wrote:
>> Add support for platforms based on the Meerkat COM module. Includes
>> support
>> for the minimal reference platform called Kein Baseboard, which in
>> fact is
>> sufficient to run most existing Meerkat carriers.
>
>> diff --git a/arch/arm/dts/tegra124-meerkat.dtsi
>> b/arch/arm/dts/tegra124-meerkat.dtsi
>
>> +    aliases {
>> +        i2c0 = "/i2c at 7000c000";
>> +        i2c1 = "/i2c at 7000c400";
>> +        i2c2 = "/i2c at 7000c500";
>> +        i2c3 = "/i2c at 7000c700";
>> +        i2c4 = "/i2c at 7000d000";
>> +        i2c5 = "/i2c at 7000d100";
>
> /i2c at 7000d000 is alias i2c0 on all other Tegra boards that have I2C
> aliases.

we just had a quick discussion about this and actually we explicitly 
changed it in our tree to a linear mapping of the controller addresses 
to be in sync with what we have in the l4t kernel.
If it won't hurt you too much we'd like to keep it that way. Though if 
you feel really bad about it, we can change it to use the same mapping 
as Jetson uses.

-Julian