[U-Boot] [RFC PATCH v1 0/2] Convert ls1021aqds to use driver model for serial ports

[Huan Wang]

Hi, York,

> On 02/08/2016 04:57 PM, York Sun wrote:
> > Since a recent merge 5160def "dm: lpuart: Drop the legacy code",
> > ls1021aqds_ddr4_nor_lpuart and ls1021aqds_nor_lpuart failed to compile
> > because they are using legacy driver for lpuart. Following ls1021atwr,
> > ls1021aqds should be converted as well.
> >
> > Not tested on boards yet. Serial DM driver is not enabled for SD and
> > QSPI configuration.
> >
> >
> > York Sun (2):
> >   arm: ls1021aqds: Convert to driver model and enable serial support
> >   arm: ls1021aqds: Enable driver model lpuart serial driver
> >
> >  arch/arm/dts/Makefile                              |    3 ++-
> >  arch/arm/dts/ls1021a-qds-duart.dts                 |   16
> ++++++++++++++++
> >  arch/arm/dts/ls1021a-qds-lpuart.dts                |   16
> ++++++++++++++++
> >  arch/arm/dts/{ls1021a-qds.dts => ls1021a-qds.dtsi} |    3 +--
> >  configs/ls1021aqds_ddr4_nor_defconfig              |    4 ++++
> >  configs/ls1021aqds_ddr4_nor_lpuart_defconfig       |    4 ++++
> >  configs/ls1021aqds_nor_defconfig                   |    4 ++++
> >  configs/ls1021aqds_nor_lpuart_defconfig            |    4 ++++
> >  configs/ls1021aqds_qspi_defconfig                  |    2 +-
> >  configs/ls1021aqds_sdcard_defconfig                |    3 +++
> >  include/configs/ls1021aqds.h                       |    2 ++
> >  11 files changed, 57 insertions(+), 4 deletions(-)  create mode
> > 100644 arch/arm/dts/ls1021a-qds-duart.dts
> >  create mode 100644 arch/arm/dts/ls1021a-qds-lpuart.dts
> >  rename arch/arm/dts/{ls1021a-qds.dts => ls1021a-qds.dtsi} (98%)
> >
> 
> Alison,
> 
> Please review this set when you come back. I could only test NOR boot on
> the remote board.
> 
[Alison Wang] I reviewed this set, and have no other comments except Bin Meng's.

BTW, I tested this set on LS1021AQDS board with that little modification.


Best Regards,
Alison Wang