[U-Boot] [RFC PATCH v1 0/2] Convert ls1021aqds to use driver model for serial ports

[york sun]

On 02/08/2016 04:57 PM, York Sun wrote:
> Since a recent merge 5160def "dm: lpuart: Drop the legacy code",
> ls1021aqds_ddr4_nor_lpuart and ls1021aqds_nor_lpuart failed to
> compile because they are using legacy driver for lpuart. Following
> ls1021atwr, ls1021aqds should be converted as well.
> 
> Not tested on boards yet. Serial DM driver is not enabled for SD
> and QSPI configuration.
> 
> 
> York Sun (2):
>   arm: ls1021aqds: Convert to driver model and enable serial support
>   arm: ls1021aqds: Enable driver model lpuart serial driver
> 
>  arch/arm/dts/Makefile                              |    3 ++-
>  arch/arm/dts/ls1021a-qds-duart.dts                 |   16 ++++++++++++++++
>  arch/arm/dts/ls1021a-qds-lpuart.dts                |   16 ++++++++++++++++
>  arch/arm/dts/{ls1021a-qds.dts => ls1021a-qds.dtsi} |    3 +--
>  configs/ls1021aqds_ddr4_nor_defconfig              |    4 ++++
>  configs/ls1021aqds_ddr4_nor_lpuart_defconfig       |    4 ++++
>  configs/ls1021aqds_nor_defconfig                   |    4 ++++
>  configs/ls1021aqds_nor_lpuart_defconfig            |    4 ++++
>  configs/ls1021aqds_qspi_defconfig                  |    2 +-
>  configs/ls1021aqds_sdcard_defconfig                |    3 +++
>  include/configs/ls1021aqds.h                       |    2 ++
>  11 files changed, 57 insertions(+), 4 deletions(-)
>  create mode 100644 arch/arm/dts/ls1021a-qds-duart.dts
>  create mode 100644 arch/arm/dts/ls1021a-qds-lpuart.dts
>  rename arch/arm/dts/{ls1021a-qds.dts => ls1021a-qds.dtsi} (98%)
> 

Alison,

Please review this set when you come back. I could only test NOR boot on the
remote board.

York