[U-Boot] [PATCH v2 00/23] dm: tegra: Convert tegra20 and tegra124 video drivers to driver model

[Simon Glass]

Hi Tom,

On 16 February 2016 at 13:13, Tom Warren <TWarren at nvidia.com> wrote:
> Simon,
>
> <snip>
>
>> >>
>> >> I think it was the follow-up patches to add the environment
>> >> work-around that was applied.
>> >>
>> >> 6c88b51 video: tegra: Enable the 'lcd' env variable work-around
>> >> a2931b3 dm: video: Add a temporary work-around for old stdout var
>> >>
>> >> I see the original v2 series here:
>> >>
>> >> http://patchwork.ozlabs.org/project/uboot/list/?delegate=4839
>> >>
>> >> so that is what needs to be applied I think. Then the Tegra config
>> >> issue should be fixed.
>> > I've applied the 23 v2 DM video patches to u-boot-tegra/master, then
>> rebased against current u-boot/master.
>> >
>> > I see the 'warning: (TEGRA_COMMON) selects VIDCONSOLE_AS_LCD which
>> has unmet direct dependencies (DM_VIDEO)' spew for almost every board
>> (w/MAKEALL -s tegra).
>> >
>> > Am I missing some patches?
>>
>> I'll make some time to look but I am tied up most of the day so it will be later,
>> sorry.
>>
>> The original series is at u-boot-dm/rke-working if that helps.
> I pulled down rke-working. The two commits you list above are *not* in that repo/branch. They _are_ in my u-boot-tegra/next branch (just pushed it to Denx).
> So building rke-working for tegra doesn't result in the DM_VIDEO warning, since the commits aren't there.
>
> Back to you.
>
> Tom

I found that tegra boards without the display enabled generate this
warning. I've sent a patch.

Regards,
Simon