[U-Boot] [PATCH 08/23] dm: pch: Add get_gpio_base op
Bin Meng
bmeng.cn at gmail.com
Mon Feb 1 10:40:43 CET 2016
x86 GPIO registers are accessed via I/O port whose base address is
configured in a PCI configuration register on the PCH device. Add
an op get_gpio_base to get the GPIO base address from PCH.
Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
---
drivers/pch/pch-uclass.c | 11 +++++++++++
include/pch.h | 18 ++++++++++++++++++
2 files changed, 29 insertions(+)
diff --git a/drivers/pch/pch-uclass.c b/drivers/pch/pch-uclass.c
index b33d502..48a3965 100644
--- a/drivers/pch/pch-uclass.c
+++ b/drivers/pch/pch-uclass.c
@@ -33,6 +33,17 @@ int pch_set_spi_protect(struct udevice *dev, bool protect)
return ops->set_spi_protect(dev, protect);
}
+int pch_get_gpio_base(struct udevice *dev, u32 *gbasep)
+{
+ struct pch_ops *ops = pch_get_ops(dev);
+
+ *gbasep = 0;
+ if (!ops->get_gpio_base)
+ return -ENOSYS;
+
+ return ops->get_gpio_base(dev, gbasep);
+}
+
static int pch_uclass_post_bind(struct udevice *bus)
{
/*
diff --git a/include/pch.h b/include/pch.h
index c04cfa3..b378865 100644
--- a/include/pch.h
+++ b/include/pch.h
@@ -32,6 +32,15 @@ struct pch_ops {
* @return 0 on success, -ENOSYS if not implemented
*/
int (*set_spi_protect)(struct udevice *dev, bool protect);
+
+ /**
+ * get_gpio_base() - get the address of GPIO base
+ *
+ * @dev: PCH device to check
+ * @gbasep: Returns address of GPIO base if available, else 0
+ * @return 0 if OK, -ve on error (e.g. there is no GPIO base)
+ */
+ int (*get_gpio_base)(struct udevice *dev, u32 *gbasep);
};
#define pch_get_ops(dev) ((struct pch_ops *)(dev)->driver->ops)
@@ -55,4 +64,13 @@ int pch_get_spi_base(struct udevice *dev, ulong *sbasep);
*/
int pch_set_spi_protect(struct udevice *dev, bool protect);
+/**
+ * pch_get_gpio_base() - get the address of GPIO base
+ *
+ * @dev: PCH device to check
+ * @gbasep: Returns address of GPIO base if available, else 0
+ * @return 0 if OK, -ve on error (e.g. there is no GPIO base)
+ */
+int pch_get_gpio_base(struct udevice *dev, u32 *gbasep);
+
#endif
--
1.8.2.1
More information about the U-Boot
mailing list