[U-Boot] [PATCH 5/6] ARM: keystone2: use SPD info to configure K2HK and K2E DDR3
Nishanth Menon
nm at ti.com
Thu Feb 25 16:52:14 CET 2016
From: Vitaly Andrianov <vitalya at ti.com>
This commit replaces hard-coded EMIF and PHY DDR3 configurations for
predefined SODIMMs to a calculated configuration. The SODIMM parameters
are read from SODIMM's SPD and used to calculated the configuration.
The current commit supports calculation for DDR3 with 1600MHz and 1333MHz
only.
Signed-off-by: Vitaly Andrianov <vitalya at ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
Signed-off-by: Nishanth Menon <nm at ti.com>
---
arch/arm/mach-keystone/Makefile | 2 +
arch/arm/mach-keystone/ddr3_spd.c | 456 +++++++++++++++++++++++++++++
arch/arm/mach-keystone/include/mach/ddr3.h | 8 +
board/ti/ks2_evm/Makefile | 4 +-
board/ti/ks2_evm/ddr3_cfg.c | 159 +---------
board/ti/ks2_evm/ddr3_cfg.h | 11 +-
board/ti/ks2_evm/ddr3_k2e.c | 51 ++--
board/ti/ks2_evm/ddr3_k2hk.c | 97 +++---
include/configs/k2e_evm.h | 2 +
include/configs/k2hk_evm.h | 2 +
10 files changed, 532 insertions(+), 260 deletions(-)
create mode 100644 arch/arm/mach-keystone/ddr3_spd.c
diff --git a/arch/arm/mach-keystone/Makefile b/arch/arm/mach-keystone/Makefile
index ffd9eadb0a49..9713fe4d6858 100644
--- a/arch/arm/mach-keystone/Makefile
+++ b/arch/arm/mach-keystone/Makefile
@@ -13,3 +13,5 @@ obj-y += cmd_mon.o
obj-y += msmc.o
obj-y += ddr3.o cmd_ddr3.o
obj-y += keystone.o
+obj-$(CONFIG_K2E_EVM) += ddr3_spd.o
+obj-$(CONFIG_K2HK_EVM) += ddr3_spd.o
diff --git a/arch/arm/mach-keystone/ddr3_spd.c b/arch/arm/mach-keystone/ddr3_spd.c
new file mode 100644
index 000000000000..b0768823f2eb
--- /dev/null
+++ b/arch/arm/mach-keystone/ddr3_spd.c
@@ -0,0 +1,456 @@
+/*
+ * Keystone2: DDR3 SPD configuration
+ *
+ * (C) Copyright 2015
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+
+#include <i2c.h>
+#include <ddr_spd.h>
+#include <asm/arch/ddr3.h>
+#include <asm/arch/hardware.h>
+
+#ifdef DUMP_DDR_CONFIG
+static void dump_phy_config(struct ddr3_phy_config *ptr)
+{
+ printf("\npllcr 0x%08X\n", ptr->pllcr);
+ printf("pgcr1_mask 0x%08X\n", ptr->pgcr1_mask);
+ printf("pgcr1_val 0x%08X\n", ptr->pgcr1_val);
+ printf("ptr0 0x%08X\n", ptr->ptr0);
+ printf("ptr1 0x%08X\n", ptr->ptr1);
+ printf("ptr2 0x%08X\n", ptr->ptr2);
+ printf("ptr3 0x%08X\n", ptr->ptr3);
+ printf("ptr4 0x%08X\n", ptr->ptr4);
+ printf("dcr_mask 0x%08X\n", ptr->dcr_mask);
+ printf("dcr_val 0x%08X\n", ptr->dcr_val);
+ printf("dtpr0 0x%08X\n", ptr->dtpr0);
+ printf("dtpr1 0x%08X\n", ptr->dtpr1);
+ printf("dtpr2 0x%08X\n", ptr->dtpr2);
+ printf("mr0 0x%08X\n", ptr->mr0);
+ printf("mr1 0x%08X\n", ptr->mr1);
+ printf("mr2 0x%08X\n", ptr->mr2);
+ printf("dtcr 0x%08X\n", ptr->dtcr);
+ printf("pgcr2 0x%08X\n", ptr->pgcr2);
+ printf("zq0cr1 0x%08X\n", ptr->zq0cr1);
+ printf("zq1cr1 0x%08X\n", ptr->zq1cr1);
+ printf("zq2cr1 0x%08X\n", ptr->zq2cr1);
+ printf("pir_v1 0x%08X\n", ptr->pir_v1);
+ printf("pir_v2 0x%08X\n\n", ptr->pir_v2);
+};
+
+static void dump_emif_config(struct ddr3_emif_config *ptr)
+{
+ printf("\nsdcfg 0x%08X\n", ptr->sdcfg);
+ printf("sdtim1 0x%08X\n", ptr->sdtim1);
+ printf("sdtim2 0x%08X\n", ptr->sdtim2);
+ printf("sdtim3 0x%08X\n", ptr->sdtim3);
+ printf("sdtim4 0x%08X\n", ptr->sdtim4);
+ printf("zqcfg 0x%08X\n", ptr->zqcfg);
+ printf("sdrfc 0x%08X\n\n", ptr->sdrfc);
+};
+#endif
+
+#define TEMP NORMAL_TEMP
+#define VBUS_CLKPERIOD 1.875 /* Corresponds to vbus=533MHz, */
+#define PLLGS_VAL (4000.0 / VBUS_CLKPERIOD) /* 4 us */
+#define PLLPD_VAL (1000.0 / VBUS_CLKPERIOD) /* 1 us */
+#define PLLLOCK_VAL (100000.0 / VBUS_CLKPERIOD) /* 100 us */
+#define PLLRST_VAL (9000.0 / VBUS_CLKPERIOD) /* 9 us */
+#define PHYRST_VAL 0x10
+#define DDR_TERM RZQ_4_TERM
+#define SDRAM_DRIVE RZQ_7_IMP
+#define DYN_ODT ODT_DISABLE
+
+enum srt {
+ NORMAL_TEMP,
+ EXTENDED_TEMP
+};
+
+enum out_impedance {
+ RZQ_6_IMP = 0,
+ RZQ_7_IMP
+};
+
+enum die_term {
+ ODT_DISABLE = 0,
+ RZQ_4_TERM,
+ RZQ_2_TERM,
+ RZQ_6_TERM,
+ RZQ_12_TERM,
+ RZQ_8_TERM
+};
+
+struct ddr3_sodimm {
+ u32 t_ck;
+ u32 freqsel;
+ u32 t_xp;
+ u32 t_cke;
+ u32 t_pllpd;
+ u32 t_pllgs;
+ u32 t_phyrst;
+ u32 t_plllock;
+ u32 t_pllrst;
+ u32 t_rfc;
+ u32 t_xs;
+ u32 t_dinit0;
+ u32 t_dinit1;
+ u32 t_dinit2;
+ u32 t_dinit3;
+ u32 t_rtp;
+ u32 t_wtr;
+ u32 t_rp;
+ u32 t_rcd;
+ u32 t_ras;
+ u32 t_rrd;
+ u32 t_rc;
+ u32 t_faw;
+ u32 t_mrd;
+ u32 t_mod;
+ u32 t_wlo;
+ u32 t_wlmrd;
+ u32 t_xsdll;
+ u32 t_xpdll;
+ u32 t_ckesr;
+ u32 t_dllk;
+ u32 t_wr;
+ u32 t_wr_bin;
+ u32 cas;
+ u32 cwl;
+ u32 asr;
+ u32 pasr;
+ u32 t_refprd;
+ u8 sdram_type;
+ u8 ibank;
+ u8 pagesize;
+ u8 t_rrd2;
+ u8 t_ras_max;
+ u8 t_zqcs;
+ u32 refresh_rate;
+ u8 t_csta;
+
+ u8 rank;
+ u8 mirrored;
+ u8 buswidth;
+};
+
+static u8 cas_latancy(u16 temp)
+{
+ int loop;
+ u8 cas_bin = 0;
+
+ for (loop = 0; loop < 32; loop += 2, temp >>= 1) {
+ if (temp & 0x0001)
+ cas_bin = (loop > 15) ? loop - 15 : loop;
+ }
+
+ return cas_bin;
+}
+
+static int ddr3_get_size_in_mb(ddr3_spd_eeprom_t *buf)
+{
+ return (((buf->organization & 0x38) >> 3) + 1) *
+ (256 << (buf->density_banks & 0xf));
+}
+
+static int ddrtimingcalculation(ddr3_spd_eeprom_t *buf, struct ddr3_sodimm *spd,
+ struct ddr3_spd_cb *spd_cb)
+{
+ u32 mtb, clk_freq;
+
+ if ((buf->mem_type != 0x0b) ||
+ ((buf->density_banks & 0x70) != 0x00))
+ return 1;
+
+ spd->sdram_type = 0x03;
+ spd->ibank = 0x03;
+
+ mtb = buf->mtb_dividend * 1000 / buf->mtb_divisor;
+
+ spd->t_ck = buf->tck_min * mtb;
+
+ spd_cb->ddrspdclock = 2000000 / spd->t_ck;
+ clk_freq = spd_cb->ddrspdclock / 2;
+
+ spd->rank = ((buf->organization & 0x38) >> 3) + 1;
+ if (spd->rank > 2)
+ return 1;
+
+ spd->pagesize = (buf->addressing & 0x07) + 1;
+ if (spd->pagesize > 3)
+ return 1;
+
+ spd->buswidth = 8 << (buf->bus_width & 0x7);
+ if ((spd->buswidth < 16) || (spd->buswidth > 64))
+ return 1;
+
+ spd->mirrored = buf->mod_section.unbuffered.addr_mapping & 1;
+
+ if (spd_cb->ddrspdclock == 1333) {
+ puts("DDR3A Speed will be configured for 1333 Operation.\n");
+
+ spd->t_xp = ((3 * spd->t_ck) > 6000) ?
+ 3 : ((5999 / spd->t_ck) + 1);
+ spd->t_cke = ((3 * spd->t_ck) > 5625) ?
+ 3 : ((5624 / spd->t_ck) + 1);
+ } else if (spd_cb->ddrspdclock == 1600) {
+ puts("DDR3A Speed will be configured for 1600 Operation.\n");
+
+ spd->t_xp = ((3 * spd->t_ck) > 6000) ?
+ 3 : ((5999 / spd->t_ck) + 1);
+ spd->t_cke = ((3 * spd->t_ck) > 5000) ?
+ 3 : ((4999 / spd->t_ck) + 1);
+ } else {
+ printf("Unsupported DDR3 speed %d\n", spd_cb->ddrspdclock);
+ return 1;
+ }
+
+ spd->t_xpdll = (spd->t_ck > 2400) ? 10 : 24000 / spd->t_ck;
+ spd->t_ckesr = spd->t_cke + 1;
+
+ /* SPD Calculated Values */
+ spd->cas = cas_latancy((buf->caslat_msb << 8) |
+ buf->caslat_lsb);
+
+ spd->t_wr = (buf->twr_min * mtb) / spd->t_ck;
+ spd->t_wr_bin = (spd->t_wr / 2) & 0x07;
+
+ spd->t_rcd = ((buf->trcd_min * mtb) - 1) / spd->t_ck + 1;
+ spd->t_rrd = ((buf->trrd_min * mtb) - 1) / spd->t_ck + 1;
+ spd->t_rp = (((buf->trp_min * mtb) - 1) / spd->t_ck) + 1;
+
+ spd->t_ras = (((buf->tras_trc_ext & 0x0f) << 8 | buf->tras_min_lsb) *
+ mtb) / spd->t_ck;
+
+ spd->t_rc = (((((buf->tras_trc_ext & 0xf0) << 4) | buf->trc_min_lsb) *
+ mtb) - 1) / spd->t_ck + 1;
+
+ spd->t_rfc = (buf->trfc_min_lsb | (buf->trfc_min_msb << 8)) * mtb /
+ 1000;
+ spd->t_wtr = (buf->twtr_min * mtb) / spd->t_ck;
+ spd->t_rtp = (buf->trtp_min * mtb) / spd->t_ck;
+
+ spd->t_xs = (((spd->t_rfc + 10) * 1000) / spd->t_ck);
+ spd->t_rfc = ((spd->t_rfc * 1000) - 1) / spd->t_ck + 1;
+
+ spd->t_faw = (((buf->tfaw_msb << 8) | buf->tfaw_min) * mtb) / spd->t_ck;
+ spd->t_rrd2 = ((((buf->tfaw_msb << 8) |
+ buf->tfaw_min) * mtb) / (4 * spd->t_ck)) - 1;
+
+ /* Hard-coded values */
+ spd->t_mrd = 0x00;
+ spd->t_mod = 0x00;
+ spd->t_wlo = 0x0C;
+ spd->t_wlmrd = 0x28;
+ spd->t_xsdll = 0x200;
+ spd->t_ras_max = 0x0F;
+ spd->t_csta = 0x05;
+ spd->t_dllk = 0x200;
+
+ /* CAS Write Latency */
+ if (spd->t_ck >= 2500)
+ spd->cwl = 0;
+ else if (spd->t_ck >= 1875)
+ spd->cwl = 1;
+ else if (spd->t_ck >= 1500)
+ spd->cwl = 2;
+ else if (spd->t_ck >= 1250)
+ spd->cwl = 3;
+ else if (spd->t_ck >= 1071)
+ spd->cwl = 4;
+ else
+ spd->cwl = 5;
+
+ /* SD:RAM Thermal and Refresh Options */
+ spd->asr = (buf->therm_ref_opt & 0x04) >> 2;
+ spd->pasr = (buf->therm_ref_opt & 0x80) >> 7;
+ spd->t_zqcs = 64;
+
+ spd->t_refprd = (TEMP == NORMAL_TEMP) ? 7812500 : 3906250;
+ spd->t_refprd = spd->t_refprd / spd->t_ck;
+
+ spd->refresh_rate = spd->t_refprd;
+ spd->t_refprd = spd->t_refprd * 5;
+
+ /* Set MISC PHY space registers fields */
+ if ((clk_freq / 2) >= 166 && (clk_freq / 2 < 275))
+ spd->freqsel = 0x03;
+ else if ((clk_freq / 2) > 225 && (clk_freq / 2 < 385))
+ spd->freqsel = 0x01;
+ else if ((clk_freq / 2) > 335 && (clk_freq / 2 < 534))
+ spd->freqsel = 0x00;
+
+ spd->t_dinit0 = 500000000 / spd->t_ck; /* CKE low time 500 us */
+ spd->t_dinit1 = spd->t_xs;
+ spd->t_dinit2 = 200000000 / spd->t_ck; /* Reset low time 200 us */
+ /* Time from ZQ initialization command to first command (1 us) */
+ spd->t_dinit3 = 1000000 / spd->t_ck;
+
+ spd->t_pllgs = PLLGS_VAL + 1;
+ spd->t_pllpd = PLLPD_VAL + 1;
+ spd->t_plllock = PLLLOCK_VAL + 1;
+ spd->t_pllrst = PLLRST_VAL;
+ spd->t_phyrst = PHYRST_VAL;
+
+ spd_cb->ddr_size_gbyte = ddr3_get_size_in_mb(buf) / 1024;
+
+ return 0;
+}
+
+static void init_ddr3param(struct ddr3_spd_cb *spd_cb,
+ struct ddr3_sodimm *spd)
+{
+ spd_cb->phy_cfg.pllcr = (spd->freqsel & 3) << 18 | 0xE << 13;
+ spd_cb->phy_cfg.pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK);
+ spd_cb->phy_cfg.pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23));
+ spd_cb->phy_cfg.ptr0 = ((spd->t_pllpd & 0x7ff) << 21) |
+ ((spd->t_pllgs & 0x7fff) << 6) | (spd->t_phyrst & 0x3f);
+ spd_cb->phy_cfg.ptr1 = ((spd->t_plllock & 0xffff) << 16) |
+ (spd->t_pllrst & 0x1fff);
+ spd_cb->phy_cfg.ptr2 = 0;
+ spd_cb->phy_cfg.ptr3 = ((spd->t_dinit1 & 0x1ff) << 20) |
+ (spd->t_dinit0 & 0xfffff);
+ spd_cb->phy_cfg.ptr4 = ((spd->t_dinit3 & 0x3ff) << 18) |
+ (spd->t_dinit2 & 0x3ffff);
+
+ spd_cb->phy_cfg.dcr_mask = PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK;
+ spd_cb->phy_cfg.dcr_val = 1 << 10;
+
+ if (spd->mirrored) {
+ spd_cb->phy_cfg.dcr_mask |= NOSRA_MASK | UDIMM_MASK;
+ spd_cb->phy_cfg.dcr_val |= (1 << 27) | (1 << 29);
+ }
+
+ spd_cb->phy_cfg.dtpr0 = (spd->t_rc & 0x3f) << 26 |
+ (spd->t_rrd & 0xf) << 22 |
+ (spd->t_ras & 0x3f) << 16 | (spd->t_rcd & 0xf) << 12 |
+ (spd->t_rp & 0xf) << 8 | (spd->t_wtr & 0xf) << 4 |
+ (spd->t_rtp & 0xf);
+ spd_cb->phy_cfg.dtpr1 = (spd->t_wlo & 0xf) << 26 |
+ (spd->t_wlmrd & 0x3f) << 20 | (spd->t_rfc & 0x1ff) << 11 |
+ (spd->t_faw & 0x3f) << 5 | (spd->t_mod & 0x7) << 2 |
+ (spd->t_mrd & 0x3);
+
+ spd_cb->phy_cfg.dtpr2 = 0 << 31 | 1 << 30 | 0 << 29 |
+ (spd->t_dllk & 0x3ff) << 19 | (spd->t_ckesr & 0xf) << 15;
+
+ spd_cb->phy_cfg.dtpr2 |= (((spd->t_xp > spd->t_xpdll) ?
+ spd->t_xp : spd->t_xpdll) &
+ 0x1f) << 10;
+
+ spd_cb->phy_cfg.dtpr2 |= (((spd->t_xs > spd->t_xsdll) ?
+ spd->t_xs : spd->t_xsdll) &
+ 0x3ff);
+
+ spd_cb->phy_cfg.mr0 = 1 << 12 | (spd->t_wr_bin & 0x7) << 9 | 0 << 8 |
+ 0 << 7 | ((spd->cas & 0x0E) >> 1) << 4 | 0 << 3 |
+ (spd->cas & 0x01) << 2;
+
+ spd_cb->phy_cfg.mr1 = 0 << 12 | 0 << 11 | 0 << 7 | 0 << 3 |
+ ((DDR_TERM >> 2) & 1) << 9 | ((DDR_TERM >> 1) & 1) << 6 |
+ (DDR_TERM & 0x1) << 2 | ((SDRAM_DRIVE >> 1) & 1) << 5 |
+ (SDRAM_DRIVE & 1) << 1 | 0 << 0;
+
+ spd_cb->phy_cfg.mr2 = DYN_ODT << 9 | TEMP << 7 | (spd->asr & 1) << 6 |
+ (spd->cwl & 7) << 3 | (spd->pasr & 7);
+
+ spd_cb->phy_cfg.dtcr = (spd->rank == 2) ? 0x730035C7 : 0x710035C7;
+ spd_cb->phy_cfg.pgcr2 = (0xF << 20) | ((int)spd->t_refprd & 0x3ffff);
+
+ spd_cb->phy_cfg.zq0cr1 = 0x0000005D;
+ spd_cb->phy_cfg.zq1cr1 = 0x0000005B;
+ spd_cb->phy_cfg.zq2cr1 = 0x0000005B;
+
+ spd_cb->phy_cfg.pir_v1 = 0x00000033;
+ spd_cb->phy_cfg.pir_v2 = 0x0000FF81;
+
+ /* EMIF Registers */
+ spd_cb->emif_cfg.sdcfg = spd->sdram_type << 29 | (DDR_TERM & 7) << 25 |
+ (DYN_ODT & 3) << 22 | (spd->cwl & 0x7) << 14 |
+ (spd->cas & 0xf) << 8 | (spd->ibank & 3) << 5 |
+ (spd->buswidth & 3) << 12 | (spd->pagesize & 3);
+
+ if (spd->rank == 2)
+ spd_cb->emif_cfg.sdcfg |= 1 << 3;
+
+ spd_cb->emif_cfg.sdtim1 = ((spd->t_wr - 1) & 0x1f) << 25 |
+ ((spd->t_ras - 1) & 0x7f) << 18 |
+ ((spd->t_rc - 1) & 0xff) << 10 |
+ (spd->t_rrd2 & 0x3f) << 4 |
+ ((spd->t_wtr - 1) & 0xf);
+
+ spd_cb->emif_cfg.sdtim2 = 0x07 << 10 | ((spd->t_rp - 1) & 0x1f) << 5 |
+ ((spd->t_rcd - 1) & 0x1f);
+
+ spd_cb->emif_cfg.sdtim3 = ((spd->t_xp - 2) & 0xf) << 28 |
+ ((spd->t_xs - 1) & 0x3ff) << 18 |
+ ((spd->t_xsdll - 1) & 0x3ff) << 8 |
+ ((spd->t_rtp - 1) & 0xf) << 4 | ((spd->t_cke) & 0xf);
+
+ spd_cb->emif_cfg.sdtim4 = (spd->t_csta & 0xf) << 28 |
+ ((spd->t_ckesr - 1) & 0xf) << 24 |
+ ((spd->t_zqcs - 1) & 0xff) << 16 |
+ ((spd->t_rfc - 1) & 0x3ff) << 4 |
+ (spd->t_ras_max & 0xf);
+
+ spd_cb->emif_cfg.sdrfc = (spd->refresh_rate - 1) & 0xffff;
+
+ /* TODO zqcfg value fixed ,May be required correction for K2E evm. */
+ spd_cb->emif_cfg.zqcfg = (spd->rank == 2) ? 0xF0073200 : 0x70073200;
+}
+
+static int ddr3_read_spd(ddr3_spd_eeprom_t *spd_params)
+{
+ int ret;
+ int old_bus;
+
+ i2c_init(CONFIG_SYS_DAVINCI_I2C_SPEED, CONFIG_SYS_DAVINCI_I2C_SLAVE);
+
+ old_bus = i2c_get_bus_num();
+ i2c_set_bus_num(1);
+
+ ret = i2c_read(0x53, 0, 1, (unsigned char *)spd_params, 256);
+
+ i2c_set_bus_num(old_bus);
+
+ if (ret) {
+ puts("Cannot read DIMM params\n");
+ return 1;
+ }
+
+ if (ddr3_spd_check(spd_params))
+ return 1;
+
+ return 0;
+}
+
+int ddr3_get_dimm_params_from_spd(struct ddr3_spd_cb *spd_cb)
+{
+ struct ddr3_sodimm spd;
+ ddr3_spd_eeprom_t spd_params;
+
+ memset(&spd, 0, sizeof(spd));
+
+ if (ddr3_read_spd(&spd_params))
+ return 1;
+
+ if (ddrtimingcalculation(&spd_params, &spd, spd_cb)) {
+ puts("Timing caclulation error\n");
+ return 1;
+ }
+
+ strncpy(spd_cb->dimm_name, (char *)spd_params.mpart, 18);
+ spd_cb->dimm_name[18] = '\0';
+
+ init_ddr3param(spd_cb, &spd);
+
+#ifdef DUMP_DDR_CONFIG
+ dump_emif_config(&spd_cb->emif_cfg);
+ dump_phy_config(&spd_cb->phy_cfg);
+#endif
+
+ return 0;
+}
diff --git a/arch/arm/mach-keystone/include/mach/ddr3.h b/arch/arm/mach-keystone/include/mach/ddr3.h
index a22c237c8026..68d3cb4245e9 100644
--- a/arch/arm/mach-keystone/include/mach/ddr3.h
+++ b/arch/arm/mach-keystone/include/mach/ddr3.h
@@ -48,6 +48,14 @@ struct ddr3_emif_config {
unsigned int sdrfc;
};
+struct ddr3_spd_cb {
+ char dimm_name[32];
+ struct ddr3_phy_config phy_cfg;
+ struct ddr3_emif_config emif_cfg;
+ unsigned int ddrspdclock;
+ int ddr_size_gbyte;
+};
+
u32 ddr3_init(void);
void ddr3_reset_ddrphy(void);
void ddr3_init_ecc(u32 base, u32 ddr3_size);
diff --git a/board/ti/ks2_evm/Makefile b/board/ti/ks2_evm/Makefile
index d60496ef2723..7ef2d2bff5a0 100644
--- a/board/ti/ks2_evm/Makefile
+++ b/board/ti/ks2_evm/Makefile
@@ -1,17 +1,17 @@
#
# KS2-EVM: board Makefile
-# (C) Copyright 2012-2014
+# (C) Copyright 2012-2015
# Texas Instruments Incorporated, <www.ti.com>
# SPDX-License-Identifier: GPL-2.0+
#
obj-y += board.o
-obj-y += ddr3_cfg.o
obj-$(CONFIG_K2HK_EVM) += board_k2hk.o
obj-$(CONFIG_K2HK_EVM) += ddr3_k2hk.o
obj-$(CONFIG_K2E_EVM) += board_k2e.o
obj-$(CONFIG_K2E_EVM) += ddr3_k2e.o
obj-$(CONFIG_K2L_EVM) += board_k2l.o
obj-$(CONFIG_K2L_EVM) += ddr3_k2l.o
+obj-$(CONFIG_K2L_EVM) += ddr3_cfg.o
obj-$(CONFIG_K2G_EVM) += board_k2g.o
obj-$(CONFIG_K2G_EVM) += ddr3_k2g.o
diff --git a/board/ti/ks2_evm/ddr3_cfg.c b/board/ti/ks2_evm/ddr3_cfg.c
index ab44676793c0..b6b59a4dd5b1 100644
--- a/board/ti/ks2_evm/ddr3_cfg.c
+++ b/board/ti/ks2_evm/ddr3_cfg.c
@@ -9,129 +9,8 @@
#include <common.h>
-#include <i2c.h>
#include <asm/arch/ddr3.h>
-#include <asm/arch/hardware.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* DDR3 PHY configuration data with 1600M rate, 8GB size */
-struct ddr3_phy_config ddr3phy_1600_8g = {
- .pllcr = 0x0001C000ul,
- .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
- .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
- .ptr0 = 0x42C21590ul,
- .ptr1 = 0xD05612C0ul,
- .ptr2 = 0, /* not set in gel */
- .ptr3 = 0x0D861A80ul,
- .ptr4 = 0x0C827100ul,
- .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK),
- .dcr_val = ((1 << 10)),
- .dtpr0 = 0xA19DBB66ul,
- .dtpr1 = 0x32868300ul,
- .dtpr2 = 0x50035200ul,
- .mr0 = 0x00001C70ul,
- .mr1 = 0x00000006ul,
- .mr2 = 0x00000018ul,
- .dtcr = 0x730035C7ul,
- .pgcr2 = 0x00F07A12ul,
- .zq0cr1 = 0x0000005Dul,
- .zq1cr1 = 0x0000005Bul,
- .zq2cr1 = 0x0000005Bul,
- .pir_v1 = 0x00000033ul,
- .pir_v2 = 0x0000FF81ul,
-};
-
-/* DDR3 EMIF configuration data with 1600M rate, 8GB size */
-struct ddr3_emif_config ddr3_1600_8g = {
- .sdcfg = 0x6200CE6Aul,
- .sdtim1 = 0x16709C55ul,
- .sdtim2 = 0x00001D4Aul,
- .sdtim3 = 0x435DFF54ul,
- .sdtim4 = 0x553F0CFFul,
- .zqcfg = 0xF0073200ul,
- .sdrfc = 0x00001869ul,
-};
-
-#ifdef CONFIG_K2HK_EVM
-/* DDR3 PHY configuration data with 1333M rate, and 2GB size */
-struct ddr3_phy_config ddr3phy_1333_2g = {
- .pllcr = 0x0005C000ul,
- .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
- .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
- .ptr0 = 0x42C21590ul,
- .ptr1 = 0xD05612C0ul,
- .ptr2 = 0, /* not set in gel */
- .ptr3 = 0x0B4515C2ul,
- .ptr4 = 0x0A6E08B4ul,
- .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK),
- .dcr_val = ((1 << 10)),
- .dtpr0 = 0x8558AA55ul,
- .dtpr1 = 0x32857280ul,
- .dtpr2 = 0x5002C200ul,
- .mr0 = 0x00001A60ul,
- .mr1 = 0x00000006ul,
- .mr2 = 0x00000010ul,
- .dtcr = 0x710035C7ul,
- .pgcr2 = 0x00F065B8ul,
- .zq0cr1 = 0x0000005Dul,
- .zq1cr1 = 0x0000005Bul,
- .zq2cr1 = 0x0000005Bul,
- .pir_v1 = 0x00000033ul,
- .pir_v2 = 0x0000FF81ul,
-};
-
-/* DDR3 EMIF configuration data with 1333M rate, and 2GB size */
-struct ddr3_emif_config ddr3_1333_2g = {
- .sdcfg = 0x62008C62ul,
- .sdtim1 = 0x125C8044ul,
- .sdtim2 = 0x00001D29ul,
- .sdtim3 = 0x32CDFF43ul,
- .sdtim4 = 0x543F0ADFul,
- .zqcfg = 0x70073200ul,
- .sdrfc = 0x00001457ul,
-};
-#endif
-
-#ifdef CONFIG_K2E_EVM
-/* DDR3 PHY configuration data with 1600M rate, and 4GB size */
-struct ddr3_phy_config ddr3phy_1600_4g = {
- .pllcr = 0x0001C000ul,
- .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
- .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
- .ptr0 = 0x42C21590ul,
- .ptr1 = 0xD05612C0ul,
- .ptr2 = 0, /* not set in gel */
- .ptr3 = 0x08861A80ul,
- .ptr4 = 0x0C827100ul,
- .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK),
- .dcr_val = ((1 << 10)),
- .dtpr0 = 0x9D9CBB66ul,
- .dtpr1 = 0x12840300ul,
- .dtpr2 = 0x5002D200ul,
- .mr0 = 0x00001C70ul,
- .mr1 = 0x00000006ul,
- .mr2 = 0x00000018ul,
- .dtcr = 0x710035C7ul,
- .pgcr2 = 0x00F07A12ul,
- .zq0cr1 = 0x0001005Dul,
- .zq1cr1 = 0x0001005Bul,
- .zq2cr1 = 0x0001005Bul,
- .pir_v1 = 0x00000033ul,
- .pir_v2 = 0x0000FF81ul,
-};
-
-/* DDR3 EMIF configuration data with 1600M rate, and 4GB size */
-struct ddr3_emif_config ddr3_1600_4g = {
- .sdcfg = 0x6200CE62ul,
- .sdtim1 = 0x166C9855ul,
- .sdtim2 = 0x00001D4Aul,
- .sdtim3 = 0x421DFF53ul,
- .sdtim4 = 0x543F07FFul,
- .zqcfg = 0x70073200ul,
- .sdrfc = 0x00001869ul,
-};
-#endif
+#include "ddr3_cfg.h"
struct ddr3_phy_config ddr3phy_1600_2g = {
.pllcr = 0x0001C000ul,
@@ -168,39 +47,3 @@ struct ddr3_emif_config ddr3_1600_2g = {
.zqcfg = 0x70073200ul,
.sdrfc = 0x00001869ul,
};
-
-int ddr3_get_dimm_params(char *dimm_name)
-{
- int ret;
- int old_bus;
- u8 spd_params[256];
-
- i2c_init(CONFIG_SYS_DAVINCI_I2C_SPEED, CONFIG_SYS_DAVINCI_I2C_SLAVE);
-
- old_bus = i2c_get_bus_num();
- i2c_set_bus_num(1);
-
- ret = i2c_read(0x53, 0, 1, spd_params, 256);
-
- i2c_set_bus_num(old_bus);
-
- dimm_name[0] = '\0';
-
- if (ret) {
- puts("Cannot read DIMM params\n");
- return 1;
- }
-
- /*
- * We need to convert spd data to dimm parameters
- * and to DDR3 EMIF and PHY regirsters values.
- * For now we just return DIMM type string value.
- * Caller may use this value to choose appropriate
- * a pre-set DDR3 configuration
- */
-
- strncpy(dimm_name, (char *)&spd_params[0x80], 18);
- dimm_name[18] = '\0';
-
- return 0;
-}
diff --git a/board/ti/ks2_evm/ddr3_cfg.h b/board/ti/ks2_evm/ddr3_cfg.h
index 5bd786cff8e9..f95eddec3308 100644
--- a/board/ti/ks2_evm/ddr3_cfg.h
+++ b/board/ti/ks2_evm/ddr3_cfg.h
@@ -10,18 +10,11 @@
#ifndef __DDR3_CFG_H
#define __DDR3_CFG_H
-extern struct ddr3_phy_config ddr3phy_1600_8g;
-extern struct ddr3_emif_config ddr3_1600_8g;
-
-extern struct ddr3_phy_config ddr3phy_1333_2g;
-extern struct ddr3_emif_config ddr3_1333_2g;
-
-extern struct ddr3_phy_config ddr3phy_1600_4g;
-extern struct ddr3_emif_config ddr3_1600_4g;
+#include <asm/arch/ddr3.h>
extern struct ddr3_phy_config ddr3phy_1600_2g;
extern struct ddr3_emif_config ddr3_1600_2g;
-int ddr3_get_dimm_params(char *dimm_name);
+int ddr3_get_dimm_params_from_spd(struct ddr3_spd_cb *spd_cb);
#endif /* __DDR3_CFG_H */
diff --git a/board/ti/ks2_evm/ddr3_k2e.c b/board/ti/ks2_evm/ddr3_k2e.c
index 35ffb4205673..e82aa6699b10 100644
--- a/board/ti/ks2_evm/ddr3_k2e.c
+++ b/board/ti/ks2_evm/ddr3_k2e.c
@@ -1,7 +1,7 @@
/*
* Keystone2: DDR3 initialization
*
- * (C) Copyright 2014
+ * (C) Copyright 2014-2015
* Texas Instruments Incorporated, <www.ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
@@ -12,42 +12,37 @@
#include <asm/arch/ddr3.h>
static struct pll_init_data ddr3_400 = DDR3_PLL_400;
+static struct pll_init_data ddr3_333 = DDR3_PLL_333;
u32 ddr3_init(void)
{
- u32 ddr3_size;
- char dimm_name[32];
+ struct ddr3_spd_cb spd_cb;
- if (~(readl(KS2_PLL_CNTRL_BASE + KS2_RSTCTRL_RSTYPE) & 0x1))
- init_pll(&ddr3_400);
+ if (ddr3_get_dimm_params_from_spd(&spd_cb)) {
+ printf("Sorry, I don't know how to configure DDR3A.\n"
+ "Bye :(\n");
+ for (;;)
+ ;
+ }
- ddr3_get_dimm_params(dimm_name);
+ printf("Detected SO-DIMM [%s]\n", spd_cb.dimm_name);
- printf("Detected SO-DIMM [%s]\n", dimm_name);
+ printf("DDR3 speed %d\n", spd_cb.ddrspdclock);
+ if (spd_cb.ddrspdclock == 1600)
+ init_pll(&ddr3_400);
+ else
+ init_pll(&ddr3_333);
/* Reset DDR3 PHY after PLL enabled */
ddr3_reset_ddrphy();
- if (!strcmp(dimm_name, "18KSF1G72HZ-1G6E2 ")) {
- /* 8G SO-DIMM */
- ddr3_size = 8;
- printf("DRAM: 8 GiB\n");
- ddr3phy_1600_8g.zq0cr1 |= 0x10000;
- ddr3phy_1600_8g.zq1cr1 |= 0x10000;
- ddr3phy_1600_8g.zq2cr1 |= 0x10000;
- ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_8g);
- ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_8g);
- } else if (!strcmp(dimm_name, "18KSF51272HZ-1G6K2")) {
- /* 4G SO-DIMM */
- ddr3_size = 4;
- printf("DRAM: 4 GiB\n");
- ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_4g);
- ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_4g);
- } else {
- printf("Unknown SO-DIMM. Cannot configure DDR3\n");
- while (1)
- ;
- }
+ spd_cb.phy_cfg.zq0cr1 |= 0x10000;
+ spd_cb.phy_cfg.zq1cr1 |= 0x10000;
+ spd_cb.phy_cfg.zq2cr1 |= 0x10000;
+ ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &spd_cb.phy_cfg);
+ ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &spd_cb.emif_cfg);
+
+ printf("DRAM: %d GiB\n", spd_cb.ddr_size_gbyte);
- return ddr3_size;
+ return (u32)spd_cb.ddr_size_gbyte;
}
diff --git a/board/ti/ks2_evm/ddr3_k2hk.c b/board/ti/ks2_evm/ddr3_k2hk.c
index b36eb27bfaa7..f8484221fa1d 100644
--- a/board/ti/ks2_evm/ddr3_k2hk.c
+++ b/board/ti/ks2_evm/ddr3_k2hk.c
@@ -17,77 +17,48 @@ struct pll_init_data ddr3a_400 = DDR3_PLL_400(A);
u32 ddr3_init(void)
{
- char dimm_name[32];
u32 ddr3_size;
+ struct ddr3_spd_cb spd_cb;
- ddr3_get_dimm_params(dimm_name);
+ if (ddr3_get_dimm_params_from_spd(&spd_cb)) {
+ printf("Sorry, I don't know how to configure DDR3A.\n"
+ "Bye :(\n");
+ for (;;)
+ ;
+ }
- printf("Detected SO-DIMM [%s]\n", dimm_name);
+ printf("Detected SO-DIMM [%s]\n", spd_cb.dimm_name);
- if (!strcmp(dimm_name, "18KSF1G72HZ-1G6E2 ")) {
- init_pll(&ddr3a_400);
- if (cpu_revision() > 0) {
- if (cpu_revision() > 1) {
- /* PG 2.0 */
- /* Reset DDR3A PHY after PLL enabled */
- ddr3_reset_ddrphy();
- ddr3phy_1600_8g.zq0cr1 |= 0x10000;
- ddr3phy_1600_8g.zq1cr1 |= 0x10000;
- ddr3phy_1600_8g.zq2cr1 |= 0x10000;
- ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
- &ddr3phy_1600_8g);
- } else {
- /* PG 1.1 */
- ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
- &ddr3phy_1600_8g);
- }
+ if ((cpu_revision() > 1) ||
+ (__raw_readl(KS2_RSTCTRL_RSTYPE) & 0x1)) {
+ printf("DDR3 speed %d\n", spd_cb.ddrspdclock);
+ if (spd_cb.ddrspdclock == 1600)
+ init_pll(&ddr3a_400);
+ else
+ init_pll(&ddr3a_333);
+ }
- ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
- &ddr3_1600_8g);
- printf("DRAM: Capacity 8 GiB (includes reported below)\n");
- ddr3_size = 8;
- } else {
- ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_8g);
- ddr3_1600_8g.sdcfg |= 0x1000;
- ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
- &ddr3_1600_8g);
- printf("DRAM: Capacity 4 GiB (includes reported below)\n");
- ddr3_size = 4;
- }
- } else if (!strcmp(dimm_name, "SQR-SD3T-2G1333SED")) {
- init_pll(&ddr3a_333);
- if (cpu_revision() > 0) {
- if (cpu_revision() > 1) {
- /* PG 2.0 */
- /* Reset DDR3A PHY after PLL enabled */
- ddr3_reset_ddrphy();
- ddr3phy_1333_2g.zq0cr1 |= 0x10000;
- ddr3phy_1333_2g.zq1cr1 |= 0x10000;
- ddr3phy_1333_2g.zq2cr1 |= 0x10000;
- ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
- &ddr3phy_1333_2g);
- } else {
- /* PG 1.1 */
- ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
- &ddr3phy_1333_2g);
- }
- ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
- &ddr3_1333_2g);
- ddr3_size = 2;
- printf("DRAM: 2 GiB");
- } else {
- ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1333_2g);
- ddr3_1333_2g.sdcfg |= 0x1000;
- ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
- &ddr3_1333_2g);
- ddr3_size = 1;
- printf("DRAM: 1 GiB");
+ if (cpu_revision() > 0) {
+ if (cpu_revision() > 1) {
+ /* PG 2.0 */
+ /* Reset DDR3A PHY after PLL enabled */
+ ddr3_reset_ddrphy();
+ spd_cb.phy_cfg.zq0cr1 |= 0x10000;
+ spd_cb.phy_cfg.zq1cr1 |= 0x10000;
+ spd_cb.phy_cfg.zq2cr1 |= 0x10000;
}
+ ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &spd_cb.phy_cfg);
+
+ ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &spd_cb.emif_cfg);
+
+ ddr3_size = spd_cb.ddr_size_gbyte;
} else {
- printf("Unknown SO-DIMM. Cannot configure DDR3\n");
- while (1)
- ;
+ ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &spd_cb.phy_cfg);
+ spd_cb.emif_cfg.sdcfg |= 0x1000;
+ ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &spd_cb.emif_cfg);
+ ddr3_size = spd_cb.ddr_size_gbyte / 2;
}
+ printf("DRAM: %d GiB (includes reported below)\n", ddr3_size);
/* Apply the workaround for PG 1.0 and 1.1 Silicons */
if (cpu_revision() <= 1)
diff --git a/include/configs/k2e_evm.h b/include/configs/k2e_evm.h
index 4f4ebf53ec59..e053a54d4169 100644
--- a/include/configs/k2e_evm.h
+++ b/include/configs/k2e_evm.h
@@ -38,4 +38,6 @@
#define CONFIG_KSNET_CPSW_NUM_PORTS 9
#define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
+#define CONFIG_DDR_SPD
+
#endif /* __CONFIG_K2E_EVM_H */
diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h
index 6c6dcb1e5ed3..3cd2a85a2d11 100644
--- a/include/configs/k2hk_evm.h
+++ b/include/configs/k2hk_evm.h
@@ -37,4 +37,6 @@
#define CONFIG_KSNET_NETCP_V1_0
#define CONFIG_KSNET_CPSW_NUM_PORTS 5
+#define CONFIG_DDR_SPD
+
#endif /* __CONFIG_K2HK_EVM_H */
--
2.7.0
More information about the U-Boot
mailing list