[U-Boot] [PATCH v5 02/32] mtd: Add Kconfig entry for MTD_M25P80

Jagan Teki jteki at openedev.com
Wed Feb 10 20:07:57 CET 2016


Added Kconfig entry for MTD_M25P80

Cc: Simon Glass <sjg at chromium.org>
Cc: Bin Meng <bmeng.cn at gmail.com>
Cc: Mugunthan V N <mugunthanvnm at ti.com>
Cc: Michal Simek <michal.simek at xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
Signed-off-by: Jagan Teki <jteki at openedev.com>
---
 drivers/mtd/spi-nor/Kconfig | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
 create mode 100644 drivers/mtd/spi-nor/Kconfig

diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
new file mode 100644
index 0000000..d32486c
--- /dev/null
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -0,0 +1,15 @@
+config MTD_M25P80
+	tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)"
+	help
+	  This enables access to most modern SPI flash chips, used for
+	  program and data storage.   Series supported include Atmel AT26DF,
+	  Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X.  Other chips
+	  are supported as well.  See the driver source for the current list,
+	  or to add other chips.
+
+	  Note that the original DataFlash chips (AT45 series, not AT26DF),
+	  need an entirely different driver.
+
+	  Set up your spi devices with the right board-specific platform data,
+	  if you want to specify device partitioning or to use a device which
+	  doesn't support the JEDEC ID instruction.
-- 
1.9.1



More information about the U-Boot mailing list