[U-Boot] [PATCH] doc: uniphier: update U-Boot file names

[Masahiro Yamada]

Since commit ad1ecd2063da ("fdt: Build a U-Boot binary without device
tree") and commit 03c25bcd263a ("fdt: Build an SPL binary without
device tree"), we can use shorter file names for the output images.

The default configuration for UniPhier SoCs enables CONFIG_OF_SEPARATE
and CONFIG_SPL_OF_CONTROL.  In this case, spl/u-boot-spl-dtb.bin is
the same as spl/u-boot-spl.bin.  Likewise, u-boot-dtb.img is the same
as u-boot.img.  So, this change of the flow has no impact.

Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---

 doc/README.uniphier | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/doc/README.uniphier b/doc/README.uniphier
index bce70cf..bcf0ac3 100644
--- a/doc/README.uniphier
+++ b/doc/README.uniphier
@@ -68,8 +68,8 @@ Burn U-Boot images to NAND
 --------------------------
 
 Write two files to the NAND device as follows:
- - spl/u-boot-spl-dtb.bin at the offset address 0x00000000
- - u-boot-dtb.img         at the offset address 0x00010000
+ - spl/u-boot-spl.bin at the offset address 0x00000000
+ - u-boot.img         at the offset address 0x00010000
 
 If a TFTP server is available, the images can be easily updated.
 Just copy the u-boot-spl-dtb.bin and u-boot-dtb.img to the TFTP public
@@ -145,4 +145,4 @@ newer SoCs.  Even if it is, EA[25] is not connected on most of the boards.
 
 --
 Masahiro Yamada <yamada.masahiro at socionext.com>
-Aug. 2015
+Feb. 2016
-- 
1.9.1