[U-Boot] [PATCH v3 3/4] drivers: usb: atmel: clean up the UTMI PLL code

Wenyou Yang wenyou.yang at atmel.com
Tue Feb 2 04:11:53 CET 2016


Due to introducing the new UTMI PLL clock handle functions,
use these function to reduce the duplicated code.

Signed-off-by: Wenyou Yang <wenyou.yang at atmel.com>
Tested-by: Heiko Schocher <hs at denx.de>
---

Changes in v3: None
Changes in v2:
 - remain asm/io.h include.

 drivers/usb/host/ehci-atmel.c |   38 ++++----------------------------------
 drivers/usb/host/ohci-at91.c  |   20 +++++++-------------
 2 files changed, 11 insertions(+), 47 deletions(-)

diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index a33fb49..1d7d280 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -7,37 +7,18 @@
  */
 
 #include <common.h>
-#include <watchdog.h>
 #include <usb.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_pmc.h>
 #include <asm/arch/clk.h>
 
 #include "ehci.h"
 
-/* Enable UTMI PLL time out 500us
- * 10 times as datasheet specified
- */
-#define EN_UPLL_TIMEOUT	500UL
-
 int ehci_hcd_init(int index, enum usb_init_type init,
 		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 {
-	at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
-	ulong start_time, tmp_time;
-
-	start_time = get_timer(0);
 	/* Enable UTMI PLL */
-	writel(AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr);
-	while ((readl(&pmc->sr) & AT91_PMC_LOCKU) != AT91_PMC_LOCKU) {
-		WATCHDOG_RESET();
-		tmp_time = get_timer(0);
-		if ((tmp_time - start_time) > EN_UPLL_TIMEOUT) {
-			printf("ERROR: failed to enable UPLL\n");
-			return -1;
-		}
-	}
+	if (at91_upll_clk_enable())
+		return -1;
 
 	/* Enable USB Host clock */
 	at91_periph_clk_enable(ATMEL_ID_UHPHS);
@@ -51,23 +32,12 @@ int ehci_hcd_init(int index, enum usb_init_type init,
 
 int ehci_hcd_stop(int index)
 {
-	at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
-	ulong start_time, tmp_time;
-
 	/* Disable USB Host Clock */
 	at91_periph_clk_disable(ATMEL_ID_UHPHS);
 
-	start_time = get_timer(0);
 	/* Disable UTMI PLL */
-	writel(readl(&pmc->uckr) & ~AT91_PMC_UPLLEN, &pmc->uckr);
-	while ((readl(&pmc->sr) & AT91_PMC_LOCKU) == AT91_PMC_LOCKU) {
-		WATCHDOG_RESET();
-		tmp_time = get_timer(0);
-		if ((tmp_time - start_time) > EN_UPLL_TIMEOUT) {
-			printf("ERROR: failed to stop UPLL\n");
-			return -1;
-		}
-	}
+	if (at91_upll_clk_disable())
+		return -1;
 
 	return 0;
 }
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index da85111..6ae6959 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -24,17 +24,13 @@ int usb_cpu_init(void)
 	while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB)
 		;
 #ifdef CONFIG_AT91SAM9N12
-	writel(AT91_PMC_USBS_USB_PLLB | AT91_PMC_USB_DIV_2, &pmc->usb);
+	at91_usb_clk_init(AT91_PMC_USBS_USB_PLLB | AT91_PMC_USB_DIV_2);
 #endif
 #elif defined(CONFIG_USB_ATMEL_CLK_SEL_UPLL)
-	/* Enable UPLL */
-	writel(readl(&pmc->uckr) | AT91_PMC_UPLLEN | AT91_PMC_BIASEN,
-		&pmc->uckr);
-	while ((readl(&pmc->sr) & AT91_PMC_LOCKU) != AT91_PMC_LOCKU)
-		;
+	if (at91_upll_clk_enable())
+		return -1;
 
-	/* Select PLLA as input clock of OHCI */
-	writel(AT91_PMC_USBS_USB_UPLL | AT91_PMC_USBDIV_10, &pmc->usb);
+	at91_usb_clk_init(AT91_PMC_USBS_USB_UPLL | AT91_PMC_USBDIV_10);
 #endif
 
 	at91_periph_clk_enable(ATMEL_ID_UHP);
@@ -60,17 +56,15 @@ int usb_cpu_stop(void)
 
 #ifdef CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #ifdef CONFIG_AT91SAM9N12
-	writel(0, &pmc->usb);
+	at91_usb_clk_init(0);
 #endif
 	/* Disable PLLB */
 	writel(0, &pmc->pllbr);
 	while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0)
 		;
 #elif defined(CONFIG_USB_ATMEL_CLK_SEL_UPLL)
-	/* Disable UPLL */
-	writel(readl(&pmc->uckr) & (~AT91_PMC_UPLLEN), &pmc->uckr);
-	while ((readl(&pmc->sr) & AT91_PMC_LOCKU) == AT91_PMC_LOCKU)
-		;
+	if (at91_upll_clk_disable())
+		return -1;
 #endif
 
 	return 0;
-- 
1.7.9.5



More information about the U-Boot mailing list