[U-Boot] [PATCH v5 20/32] mtd: spi-nor: Copy spl files from drivers/mtd/spi

[Jagan Teki]

Copy spl files from drivers/mtd/spi to spi-nor,
more changes will added on future patches.

Cc: Simon Glass <sjg at chromium.org>
Cc: Bin Meng <bmeng.cn at gmail.com>
Cc: Mugunthan V N <mugunthanvnm at ti.com>
Cc: Michal Simek <michal.simek at xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
Signed-off-by: Jagan Teki <jteki at openedev.com>
---
 drivers/mtd/spi-nor/Makefile       |  5 +++
 drivers/mtd/spi-nor/fsl_espi_spl.c | 90 ++++++++++++++++++++++++++++++++++++++
 drivers/mtd/spi-nor/spi_spl_load.c | 90 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 185 insertions(+)
 create mode 100644 drivers/mtd/spi-nor/fsl_espi_spl.c
 create mode 100644 drivers/mtd/spi-nor/spi_spl_load.c

diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
index 71e7ae2..4d27811 100644
--- a/drivers/mtd/spi-nor/Makefile
+++ b/drivers/mtd/spi-nor/Makefile
@@ -3,6 +3,11 @@
 #
 # SPDX-License-Identifier:	GPL-2.0+
 
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_SPL_SPI_LOAD)	+= spi_spl_load.o
+obj-$(CONFIG_SPL_SPI_BOOT)	+= fsl_espi_spl.o
+endif
+
 ifdef CONFIG_MTD_SPI_NOR
 obj-y += spi-nor.o
 obj-y += spi-nor-ids.o
diff --git a/drivers/mtd/spi-nor/fsl_espi_spl.c b/drivers/mtd/spi-nor/fsl_espi_spl.c
new file mode 100644
index 0000000..b915469
--- /dev/null
+++ b/drivers/mtd/spi-nor/fsl_espi_spl.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <spi_flash.h>
+#include <malloc.h>
+
+#define ESPI_BOOT_IMAGE_SIZE	0x48
+#define ESPI_BOOT_IMAGE_ADDR	0x50
+#define CONFIG_CFG_DATA_SECTOR	0
+
+void spi_spl_load_image(uint32_t offs, unsigned int size, void *vdst)
+{
+	struct spi_flash *flash;
+
+	flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
+			CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
+	if (flash == NULL) {
+		puts("\nspi_flash_probe failed");
+		hang();
+	}
+
+	spi_flash_read(flash, offs, size, vdst);
+}
+
+/*
+ * The main entry for SPI booting. It's necessary that SDRAM is already
+ * configured and available since this code loads the main U-Boot image
+ * from SPI into SDRAM and starts it from there.
+ */
+void spi_boot(void)
+{
+	void (*uboot)(void) __noreturn;
+	u32 offset, code_len, copy_len = 0;
+#ifndef CONFIG_FSL_CORENET
+	unsigned char *buf = NULL;
+#endif
+	struct spi_flash *flash;
+
+	flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
+			CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
+	if (flash == NULL) {
+		puts("\nspi_flash_probe failed");
+		hang();
+	}
+
+#ifdef CONFIG_FSL_CORENET
+	offset = CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS;
+	code_len = CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE;
+#else
+	/*
+	* Load U-Boot image from SPI flash into RAM
+	*/
+	buf = malloc(flash->page_size);
+	if (buf == NULL) {
+		puts("\nmalloc failed");
+		hang();
+	}
+	memset(buf, 0, flash->page_size);
+
+	spi_flash_read(flash, CONFIG_CFG_DATA_SECTOR,
+		       flash->page_size, (void *)buf);
+	offset = *(u32 *)(buf + ESPI_BOOT_IMAGE_ADDR);
+	/* Skip spl code */
+	offset += CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS;
+	/* Get the code size from offset 0x48 */
+	code_len = *(u32 *)(buf + ESPI_BOOT_IMAGE_SIZE);
+	/* Skip spl code */
+	code_len = code_len - CONFIG_SPL_MAX_SIZE;
+#endif
+	/* copy code to DDR */
+	printf("Loading second stage boot loader ");
+	while (copy_len <= code_len) {
+		spi_flash_read(flash, offset + copy_len, 0x2000,
+			       (void *)(CONFIG_SYS_SPI_FLASH_U_BOOT_DST
+			       + copy_len));
+		copy_len = copy_len + 0x2000;
+		putc('.');
+	}
+
+	/*
+	* Jump to U-Boot image
+	*/
+	flush_cache(CONFIG_SYS_SPI_FLASH_U_BOOT_DST, code_len);
+	uboot = (void *)CONFIG_SYS_SPI_FLASH_U_BOOT_START;
+	(*uboot)();
+}
diff --git a/drivers/mtd/spi-nor/spi_spl_load.c b/drivers/mtd/spi-nor/spi_spl_load.c
new file mode 100644
index 0000000..ca56fe9
--- /dev/null
+++ b/drivers/mtd/spi-nor/spi_spl_load.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright (C) 2011 OMICRON electronics GmbH
+ *
+ * based on drivers/mtd/nand/nand_spl_load.c
+ *
+ * Copyright (C) 2011
+ * Heiko Schocher, DENX Software Engineering, hs at denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <spi.h>
+#include <spi_flash.h>
+#include <errno.h>
+#include <spl.h>
+
+#ifdef CONFIG_SPL_OS_BOOT
+/*
+ * Load the kernel, check for a valid header we can parse, and if found load
+ * the kernel and then device tree.
+ */
+static int spi_load_image_os(struct spi_flash *flash,
+			     struct image_header *header)
+{
+	/* Read for a header, parse or error out. */
+	spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS, 0x40,
+		       (void *)header);
+
+	if (image_get_magic(header) != IH_MAGIC)
+		return -1;
+
+	spl_parse_image_header(header);
+
+	spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS,
+		       spl_image.size, (void *)spl_image.load_addr);
+
+	/* Read device tree. */
+	spi_flash_read(flash, CONFIG_SYS_SPI_ARGS_OFFS,
+		       CONFIG_SYS_SPI_ARGS_SIZE,
+		       (void *)CONFIG_SYS_SPL_ARGS_ADDR);
+
+	return 0;
+}
+#endif
+
+/*
+ * The main entry for SPI booting. It's necessary that SDRAM is already
+ * configured and available since this code loads the main U-Boot image
+ * from SPI into SDRAM and starts it from there.
+ */
+int spl_spi_load_image(void)
+{
+	int err = 0;
+	struct spi_flash *flash;
+	struct image_header *header;
+
+	/*
+	 * Load U-Boot image from SPI flash into RAM
+	 */
+
+	flash = spi_flash_probe(CONFIG_SF_DEFAULT_BUS,
+				CONFIG_SF_DEFAULT_CS,
+				CONFIG_SF_DEFAULT_SPEED,
+				CONFIG_SF_DEFAULT_MODE);
+	if (!flash) {
+		puts("SPI probe failed.\n");
+		return -ENODEV;
+	}
+
+	/* use CONFIG_SYS_TEXT_BASE as temporary storage area */
+	header = (struct image_header *)(CONFIG_SYS_TEXT_BASE);
+
+#ifdef CONFIG_SPL_OS_BOOT
+	if (spl_start_uboot() || spi_load_image_os(flash, header))
+#endif
+	{
+		/* Load u-boot, mkimage header is 64 bytes. */
+		err = spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS, 0x40,
+				     (void *)header);
+		if (err)
+			return err;
+
+		spl_parse_image_header(header);
+		err = spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS,
+			       spl_image.size, (void *)spl_image.load_addr);
+	}
+
+	return err;
+}
-- 
1.9.1