[U-Boot] [PATCH v2 1/3] imx: mx6quq7: fix USDHC4 declaration

[Boris Brezillon]

On Fri,  5 Feb 2016 16:19:31 +0100
Julien Corjon <corjon.j at ecagroup.com> wrote:

> USDHC2 does not exist on mx6quq7 board, as USDHC4 was already been
> declared this is probably a typo.
> 
> Signed-off-by: Julien Corjon <corjon.j at ecagroup.com>

For the whole series:

Acked-by: Boris Brezillon <boris.brezillon at free-electrons.com>

Thanks,

Boris

> ---
> v1 -> v2
>   - Split patch (suggested by Boris)
>   - Replace spaces with tab (suggested by Boris)
> 
>  board/seco/mx6quq7/mx6quq7.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/board/seco/mx6quq7/mx6quq7.c b/board/seco/mx6quq7/mx6quq7.c
> index ea1d4b8..3743a9e 100644
> --- a/board/seco/mx6quq7/mx6quq7.c
> +++ b/board/seco/mx6quq7/mx6quq7.c
> @@ -93,7 +93,7 @@ int board_eth_init(bd_t *bis)
>  
>  static struct fsl_esdhc_cfg usdhc_cfg[2] = {
>  	{USDHC3_BASE_ADDR},
> -	{USDHC2_BASE_ADDR},
> +	{USDHC4_BASE_ADDR},
>  };
>  
>  int board_mmc_init(bd_t *bis)



-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com