[U-Boot] [PATCH 1/2] mx7_common: Put early/late init configs into board file

[Peng Fan]

On Fri, Feb 26, 2016 at 03:16:09PM -0300, Fabio Estevam wrote:
>From: Fabio Estevam <fabio.estevam at nxp.com>
>
>CONFIG_BOARD_EARLY_INIT_F and CONFIG_BOARD_LATE_INIT should not be
>placed into mx7_common because not all boards need these options.
>
>Move them to the board file instead.
>
>Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
>---
> include/configs/mx7_common.h  | 3 ---
> include/configs/mx7dsabresd.h | 3 +++
> 2 files changed, 3 insertions(+), 3 deletions(-)
>
>diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h
>index fac7c3f..a78fc7c 100644
>--- a/include/configs/mx7_common.h
>+++ b/include/configs/mx7_common.h
>@@ -32,9 +32,6 @@
> /* Size of malloc() pool */
> #define CONFIG_SYS_MALLOC_LEN           (32 * SZ_1M)
> 
>-#define CONFIG_BOARD_EARLY_INIT_F
>-#define CONFIG_BOARD_LATE_INIT
>-
> #define CONFIG_DISPLAY_CPUINFO
> #define CONFIG_DISPLAY_BOARDINFO
> 
>diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h
>index 2c981e0..d233572 100644
>--- a/include/configs/mx7dsabresd.h
>+++ b/include/configs/mx7dsabresd.h
>@@ -14,6 +14,9 @@
> #define CONFIG_DBG_MONITOR
> #define PHYS_SDRAM_SIZE			SZ_1G
> 
>+#define CONFIG_BOARD_EARLY_INIT_F
>+#define CONFIG_BOARD_LATE_INIT
>+
> /* Uncomment to enable secure boot support */
> /* #define CONFIG_SECURE_BOOT */
> #define CONFIG_CSF_SIZE			0x4000

Reviewed-by: Peng Fan <peng.fan at nxp.com>

>-- 
>1.9.1
>
>_______________________________________________
>U-Boot mailing list
>U-Boot at lists.denx.de
>http://lists.denx.de/mailman/listinfo/u-boot