[U-Boot] [PATCH 04/27] omap_hsmmc: Board-specific TWL6030 MMC power initialization

[Paul Kocialkowski]

Boards using the TWL6030 regulator may not all use the LDOs the same way.
Some might also not use MMC1 at all, so VMMC would't have to be enabled.

This delegates TWL6030 MMC power initializations to board-specific functions,
that may still call twl6030_power_mmc_init for the default behavior.

Signed-off-by: Paul Kocialkowski <contact at paulk.fr>
---
 board/gumstix/duovero/duovero.c | 6 +++++-
 board/ti/panda/panda.c          | 6 ++++++
 board/ti/sdp4430/sdp.c          | 6 ++++++
 drivers/mmc/omap_hsmmc.c        | 6 ++----
 4 files changed, 19 insertions(+), 5 deletions(-)

diff --git a/board/gumstix/duovero/duovero.c b/board/gumstix/duovero/duovero.c
index 81d6c82..1fb6b5d 100644
--- a/board/gumstix/duovero/duovero.c
+++ b/board/gumstix/duovero/duovero.c
@@ -115,8 +115,12 @@ int board_mmc_init(bd_t *bis)
 {
 	return omap_mmc_init(0, 0, 0, -1, -1);
 }
-#endif
 
+void board_mmc_power_init(void)
+{
+	twl6030_power_mmc_init(0);
+}
+#endif
 
 #if defined(CONFIG_CMD_NET)
 
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
index eb9ce63..959a23f 100644
--- a/board/ti/panda/panda.c
+++ b/board/ti/panda/panda.c
@@ -11,6 +11,7 @@
 #include <asm/arch/clock.h>
 #include <asm/arch/gpio.h>
 #include <asm/gpio.h>
+#include <twl6030.h>
 
 #include "panda_mux_data.h"
 
@@ -291,6 +292,11 @@ int board_mmc_init(bd_t *bis)
 {
 	return omap_mmc_init(0, 0, 0, -1, -1);
 }
+
+void board_mmc_power_init(void)
+{
+	twl6030_power_mmc_init(0);
+}
 #endif
 
 #ifdef CONFIG_USB_EHCI
diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c
index 1e9ef9e..c456745 100644
--- a/board/ti/sdp4430/sdp.c
+++ b/board/ti/sdp4430/sdp.c
@@ -80,6 +80,12 @@ int board_mmc_init(bd_t *bis)
 	omap_mmc_init(1, 0, 0, -1, -1);
 	return 0;
 }
+
+void board_mmc_power_init(void)
+{
+	twl6030_power_mmc_init(0);
+	twl6030_power_mmc_init(1);
+}
 #endif
 
 /*
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
index 0ea3101..29773d0 100644
--- a/drivers/mmc/omap_hsmmc.c
+++ b/drivers/mmc/omap_hsmmc.c
@@ -96,7 +96,7 @@ static int omap_mmc_setup_gpio_in(int gpio, const char *label)
 }
 #endif
 
-#if defined(CONFIG_OMAP44XX) && defined(CONFIG_TWL6030_POWER)
+#if defined(CONFIG_OMAP44XX)
 static void omap4_vmmc_pbias_config(struct mmc *mmc)
 {
 	u32 value = 0;
@@ -104,8 +104,6 @@ static void omap4_vmmc_pbias_config(struct mmc *mmc)
 	value = readl((*ctrl)->control_pbiaslite);
 	value &= ~(MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ);
 	writel(value, (*ctrl)->control_pbiaslite);
-	twl6030_power_mmc_init(0);
-	twl6030_power_mmc_init(1);
 	value = readl((*ctrl)->control_pbiaslite);
 	value |= MMC1_PBIASLITE_VMODE | MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ;
 	writel(value, (*ctrl)->control_pbiaslite);
@@ -175,7 +173,7 @@ static unsigned char mmc_board_init(struct mmc *mmc)
 		&prcm_base->iclken1_core);
 #endif
 
-#if defined(CONFIG_OMAP44XX) && defined(CONFIG_TWL6030_POWER)
+#if defined(CONFIG_OMAP44XX)
 	/* PBIAS config needed for MMC1 only */
 	if (mmc->block_dev.dev == 0)
 		omap4_vmmc_pbias_config(mmc);
-- 
2.6.4