[U-Boot] [PATCH 4/6] ARM: keystone2: K2G: Add support for different arm/device speeds
Nishanth Menon
nm at ti.com
Thu Feb 25 16:52:13 CET 2016
From: Lokesh Vutla <lokeshvutla at ti.com>
The maximum device and arm speeds can be determined by reading
EFUSE_BOOTROM register. As there is already a framework for reading this
register, adding support for all possible speeds on k2g devices.
Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
Signed-off-by: Nishanth Menon <nm at ti.com>
---
arch/arm/mach-keystone/clock.c | 7 +++-
arch/arm/mach-keystone/include/mach/clock-k2g.h | 4 +-
arch/arm/mach-keystone/include/mach/clock.h | 4 ++
board/ti/ks2_evm/board_k2g.c | 50 +++++++++++++++++++++++--
4 files changed, 57 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-keystone/clock.c b/arch/arm/mach-keystone/clock.c
index 1ae3baf982a1..b25db1e3fede 100644
--- a/arch/arm/mach-keystone/clock.c
+++ b/arch/arm/mach-keystone/clock.c
@@ -238,8 +238,11 @@ static int get_max_speed(u32 val, u32 speed_supported, int *spds)
return spds[speed];
}
- /* If no bit is set, use SPD800 */
- return SPD800;
+ /* If no bit is set, return minimum speed */
+ if (cpu_is_k2g())
+ return SPD200;
+ else
+ return SPD800;
}
static inline u32 read_efuse_bootrom(void)
diff --git a/arch/arm/mach-keystone/include/mach/clock-k2g.h b/arch/arm/mach-keystone/include/mach/clock-k2g.h
index 214c1d3a8360..74de6202fe50 100644
--- a/arch/arm/mach-keystone/include/mach/clock-k2g.h
+++ b/arch/arm/mach-keystone/include/mach/clock-k2g.h
@@ -12,8 +12,8 @@
#define PLLSET_CMD_LIST "<pa|arm|ddr3>"
-#define DEV_SUPPORTED_SPEEDS 0xfff
-#define ARM_SUPPORTED_SPEEDS 0xfff
+#define DEV_SUPPORTED_SPEEDS 0x1ff
+#define ARM_SUPPORTED_SPEEDS 0xff
#define KS2_CLK1_6 sys_clk0_6_clk
diff --git a/arch/arm/mach-keystone/include/mach/clock.h b/arch/arm/mach-keystone/include/mach/clock.h
index dfebcb03ea57..72724aa4a912 100644
--- a/arch/arm/mach-keystone/include/mach/clock.h
+++ b/arch/arm/mach-keystone/include/mach/clock.h
@@ -63,8 +63,12 @@
#define CLOCK_INDEXES_LIST CLK_LIST(GENERATE_INDX_STR)
enum {
+ SPD200,
+ SPD400,
+ SPD600,
SPD800,
SPD850,
+ SPD900,
SPD1000,
SPD1200,
SPD1250,
diff --git a/board/ti/ks2_evm/board_k2g.c b/board/ti/ks2_evm/board_k2g.c
index cdeb056a76c4..b62c41225039 100644
--- a/board/ti/ks2_evm/board_k2g.c
+++ b/board/ti/ks2_evm/board_k2g.c
@@ -23,22 +23,64 @@ unsigned int external_clk[ext_clk_count] = {
[uart_clk] = SYS_CLK,
};
-static struct pll_init_data main_pll_config = {MAIN_PLL, 100, 1, 4};
-static struct pll_init_data tetris_pll_config = {TETRIS_PLL, 100, 1, 4};
+static int arm_speeds[DEVSPEED_NUMSPDS] = {
+ SPD400,
+ SPD600,
+ SPD800,
+ SPD900,
+ SPD1000,
+ SPD900,
+ SPD800,
+ SPD600,
+ SPD400,
+ SPD200,
+};
+
+static int dev_speeds[DEVSPEED_NUMSPDS] = {
+ SPD600,
+ SPD800,
+ SPD900,
+ SPD1000,
+ SPD900,
+ SPD800,
+ SPD600,
+ SPD400,
+};
+
+static struct pll_init_data main_pll_config[NUM_SPDS] = {
+ [SPD400] = {MAIN_PLL, 100, 3, 2},
+ [SPD600] = {MAIN_PLL, 300, 6, 2},
+ [SPD800] = {MAIN_PLL, 200, 3, 2},
+ [SPD900] = {TETRIS_PLL, 75, 1, 2},
+ [SPD1000] = {TETRIS_PLL, 250, 3, 2},
+};
+
+static struct pll_init_data tetris_pll_config[NUM_SPDS] = {
+ [SPD200] = {TETRIS_PLL, 250, 3, 10},
+ [SPD400] = {TETRIS_PLL, 100, 1, 6},
+ [SPD600] = {TETRIS_PLL, 100, 1, 4},
+ [SPD800] = {TETRIS_PLL, 400, 3, 4},
+ [SPD900] = {TETRIS_PLL, 75, 1, 2},
+ [SPD1000] = {TETRIS_PLL, 250, 3, 2},
+};
+
static struct pll_init_data uart_pll_config = {UART_PLL, 64, 1, 4};
static struct pll_init_data nss_pll_config = {NSS_PLL, 250, 3, 2};
static struct pll_init_data ddr3_pll_config = {DDR3A_PLL, 250, 3, 10};
struct pll_init_data *get_pll_init_data(int pll)
{
+ int speed;
struct pll_init_data *data = NULL;
switch (pll) {
case MAIN_PLL:
- data = &main_pll_config;
+ speed = get_max_dev_speed(dev_speeds);
+ data = &main_pll_config[speed];
break;
case TETRIS_PLL:
- data = &tetris_pll_config;
+ speed = get_max_arm_speed(arm_speeds);
+ data = &tetris_pll_config[speed];
break;
case NSS_PLL:
data = &nss_pll_config;
--
2.7.0
More information about the U-Boot
mailing list