[U-Boot] [PATCH v4 07/14] SECURE BOOT: Change env variable "fdt_high" for LS2080a and LS2085a

[Saksham Jain]

"fdt_high" env variable has been changed to 0xa0000000 for ls2080a
and ls2085a during Secure Boot. This env_varible is used to specify
the upper limit to be used for copying flat device tree.
This address must be visible to kernel.

The "fdt_high" value has been set during Secure Boot to same value
as it's default value during non-secure boot.

Signed-off-by: Aneesh Bansal <aneesh.bansal at nxp.com>
Signed-off-by: Saksham Jain <saksham.jain at nxp.com>
---
Changes for v2:
	- No changes
Changes for v3:
	- No changes
Changes for v4:
	- No changes

 arch/arm/include/asm/fsl_secure_boot.h | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h
index 7ab9623..eafdc0b 100644
--- a/arch/arm/include/asm/fsl_secure_boot.h
+++ b/arch/arm/include/asm/fsl_secure_boot.h
@@ -57,10 +57,17 @@
 #define CONFIG_ESBC_ADDR_64BIT
 #endif
 
+#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+#define CONFIG_EXTRA_ENV \
+	"setenv fdt_high 0xa0000000;"	\
+	"setenv initrd_high 0xcfffffff;"	\
+	"setenv hwconfig \'fsl_ddr:ctlr_intlv=null,bank_intlv=null\';"
+#else
 #define CONFIG_EXTRA_ENV \
 	"setenv fdt_high 0xcfffffff;"	\
 	"setenv initrd_high 0xcfffffff;"	\
 	"setenv hwconfig \'fsl_ddr:ctlr_intlv=null,bank_intlv=null\';"
+#endif
 
 /* Copying Bootscript and Header to DDR from NOR for LS2 and for rest, from
  * Non-XIP Memory (Nand/SD)*/
-- 
1.8.1.4