[U-Boot] [PATCH] drivers/crypto/fsl : Allocate output ring with size aligned to CACHELNE SIZE
Ulises Cardenas
raul.casas at nxp.com
Tue Feb 2 20:46:38 CET 2016
Ok to push
________________________________________
From: Ruchika Gupta <ruchika.gupta at nxp.com>
Sent: Friday, January 22, 2016 4:42 AM
To: u-boot at lists.denx.de; york sun; Ulises Cardenas
Cc: Ruchika Gupta; Saksham Jain; Ruchika Gupta
Subject: [PATCH] drivers/crypto/fsl : Allocate output ring with size aligned to CACHELNE SIZE
From: Ruchika Gupta <ruchika.gupta at freescale.com>
The output ring needs to be invalidated before enqueuing the job to SEC.
While allocation of space to output ring, it should be taken care that the
size is cacheline size aligned inorder to prevent invalidating valid data.
The patch also correct the method of aligning end of structs while flushing caches
Since start = align(start_of_struct), it is incorrect to assign
end = align(start + struct_size). It should instead be,
end = align(start_of_struct + struct_size).
Signed-off-by: Saksham Jain <saksham at nxp.com>
Signed-off-by: Ruchika Gupta <ruchika.gupta at nxp.com>
---
drivers/crypto/fsl/jr.c | 28 ++++++++++++++++------------
drivers/crypto/fsl/jr.h | 2 ++
2 files changed, 18 insertions(+), 12 deletions(-)
diff --git a/drivers/crypto/fsl/jr.c b/drivers/crypto/fsl/jr.c
index b553e3c..4566ec3 100644
--- a/drivers/crypto/fsl/jr.c
+++ b/drivers/crypto/fsl/jr.c
@@ -95,14 +95,16 @@ static int jr_init(void)
JR_SIZE * sizeof(dma_addr_t));
if (!jr.input_ring)
return -1;
+
+ jr.op_size = roundup(JR_SIZE * sizeof(struct op_ring),
+ ARCH_DMA_MINALIGN);
jr.output_ring =
- (struct op_ring *)memalign(ARCH_DMA_MINALIGN,
- JR_SIZE * sizeof(struct op_ring));
+ (struct op_ring *)memalign(ARCH_DMA_MINALIGN, jr.op_size);
if (!jr.output_ring)
return -1;
memset(jr.input_ring, 0, JR_SIZE * sizeof(dma_addr_t));
- memset(jr.output_ring, 0, JR_SIZE * sizeof(struct op_ring));
+ memset(jr.output_ring, 0, jr.op_size);
start_jr0();
@@ -190,8 +192,8 @@ static int jr_enqueue(uint32_t *desc_addr,
unsigned long start = (unsigned long)&jr.info[head] &
~(ARCH_DMA_MINALIGN - 1);
- unsigned long end = ALIGN(start + sizeof(struct jr_info),
- ARCH_DMA_MINALIGN);
+ unsigned long end = ALIGN((unsigned long)&jr.info[head] +
+ sizeof(struct jr_info), ARCH_DMA_MINALIGN);
flush_dcache_range(start, end);
#ifdef CONFIG_PHYS_64BIT
@@ -216,11 +218,19 @@ static int jr_enqueue(uint32_t *desc_addr,
#endif /* ifdef CONFIG_PHYS_64BIT */
start = (unsigned long)&jr.input_ring[head] & ~(ARCH_DMA_MINALIGN - 1);
- end = ALIGN(start + sizeof(phys_addr_t), ARCH_DMA_MINALIGN);
+ end = ALIGN((unsigned long)&jr.input_ring[head] +
+ sizeof(dma_addr_t), ARCH_DMA_MINALIGN);
flush_dcache_range(start, end);
jr.head = (head + 1) & (jr.size - 1);
+ /* Invalidate output ring */
+ start = (unsigned long)jr.output_ring &
+ ~(ARCH_DMA_MINALIGN - 1);
+ end = ALIGN((unsigned long)jr.output_ring + jr.op_size,
+ ARCH_DMA_MINALIGN);
+ invalidate_dcache_range(start, end);
+
sec_out32(®s->irja, 1);
return 0;
@@ -241,12 +251,6 @@ static int jr_dequeue(void)
#endif
while (sec_in32(®s->orsf) && CIRC_CNT(jr.head, jr.tail, jr.size)) {
- unsigned long start = (unsigned long)jr.output_ring &
- ~(ARCH_DMA_MINALIGN - 1);
- unsigned long end = ALIGN(start +
- sizeof(struct op_ring)*JR_SIZE,
- ARCH_DMA_MINALIGN);
- invalidate_dcache_range(start, end);
found = 0;
diff --git a/drivers/crypto/fsl/jr.h b/drivers/crypto/fsl/jr.h
index 5899696..545d964 100644
--- a/drivers/crypto/fsl/jr.h
+++ b/drivers/crypto/fsl/jr.h
@@ -72,6 +72,8 @@ struct jobring {
int write_idx;
/* Size of the rings. */
int size;
+ /* Op ring size aligned to cache line size */
+ int op_size;
/* The ip and output rings have to be accessed by SEC. So the
* pointers will ahve to point to the housekeeping region provided
* by SEC
--
1.8.1.4
More information about the U-Boot
mailing list