[U-Boot] [PATCH 2/2] mx7dsabresd: Define serial port locally

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at nxp.com>

CONFIG_MXC_UART_BASE should not be defined in mx7_common.h as
the console port can vary from board to board.

Define CONFIG_MXC_UART_BASE locally instead.

Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
---
 include/configs/mx7_common.h  | 1 -
 include/configs/mx7dsabresd.h | 2 ++
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h
index b2a8756..bfad696 100644
--- a/include/configs/mx7_common.h
+++ b/include/configs/mx7_common.h
@@ -77,7 +77,6 @@
 
 /* UART */
 #define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
 
 /* MMC */
 #define CONFIG_MMC
diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h
index 2c981e0..b8b5b45 100644
--- a/include/configs/mx7dsabresd.h
+++ b/include/configs/mx7dsabresd.h
@@ -14,6 +14,8 @@
 #define CONFIG_DBG_MONITOR
 #define PHYS_SDRAM_SIZE			SZ_1G
 
+#define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
+
 /* Uncomment to enable secure boot support */
 /* #define CONFIG_SECURE_BOOT */
 #define CONFIG_CSF_SIZE			0x4000
-- 
1.9.1