[U-Boot] [PATCH v2] arm: mxs: add support for I2SE's Duckbill boards
Stefano Babic
sbabic at denx.de
Sun Jan 3 15:56:01 CET 2016
Hi Michael,
some aditional comments before you will send V3:
On 13/12/2015 12:09, Michael Heimpold wrote:
> Signed-off-by: Michael Heimpold <mhei at heimpold.de>
This is the patch introducing a new board. It is not bad if you add some
info in the commit message, for example which peripherals are already
supported and so on. See other commit messages from other boards.
> ---
>
> Please note, that this board setup files need the function
> mxs_power_switch_dcdc_clocksource() as introduced in my patch
> "ARM: mxs: allow boards to select DC-DC switching clock source"
>
> Changes in v2:
> - added autoboot stuff
> - reworked tftp update workflow
> - added dc-dc clock source configuration
>
> Changes in v1:
> - initial public submission
>
> arch/arm/Kconfig | 8 ++
> arch/arm/include/asm/mach-types.h | 13 +++
> board/i2se/duckbill/Kconfig | 15 +++
> board/i2se/duckbill/MAINTAINERS | 6 ++
> board/i2se/duckbill/Makefile | 12 +++
> board/i2se/duckbill/duckbill.c | 180 +++++++++++++++++++++++++++++++
> board/i2se/duckbill/iomux.c | 162 ++++++++++++++++++++++++++++
> configs/duckbill_defconfig | 8 ++
> include/configs/duckbill.h | 216 ++++++++++++++++++++++++++++++++++++++
> 9 files changed, 620 insertions(+)
> create mode 100644 board/i2se/duckbill/Kconfig
> create mode 100644 board/i2se/duckbill/MAINTAINERS
> create mode 100644 board/i2se/duckbill/Makefile
> create mode 100644 board/i2se/duckbill/duckbill.c
> create mode 100644 board/i2se/duckbill/iomux.c
> create mode 100644 configs/duckbill_defconfig
> create mode 100644 include/configs/duckbill.h
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index fb9176b..e612194 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -167,6 +167,13 @@ config TARGET_MX28EVK
> select CPU_ARM926EJS
> select SUPPORT_SPL
>
> +config TARGET_DUCKBILL
> + bool "Support duckbill"
> + select CPU_ARM926EJS
> + select SUPPORT_SPL
> + help
> + Support for I2SE's Duckbill series.
> +
This is a complete separate issue - it could be fixed later. I noted
that the number of MX23/MX28 boards (mxs) is becoming quite large, and
each time arch/arm/Kconfig must be fixed. What about to add a
arch/arm/cpu/arm926ejs/mxs/Kconfig, in the same way we did for MX6 ?
> config TARGET_MX23_OLINUXINO
> bool "Support mx23_olinuxino"
> select CPU_ARM926EJS
> @@ -803,6 +810,7 @@ source "board/freescale/vf610twr/Kconfig"
> source "board/gumstix/pepper/Kconfig"
> source "board/h2200/Kconfig"
> source "board/hisilicon/hikey/Kconfig"
> +source "board/i2se/duckbill/Kconfig"
> source "board/imx31_phycore/Kconfig"
> source "board/isee/igep0033/Kconfig"
> source "board/maxbcm/Kconfig"
> diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h
> index d51be0b..1f0ffaa 100644
> --- a/arch/arm/include/asm/mach-types.h
> +++ b/arch/arm/include/asm/mach-types.h
> @@ -1107,6 +1107,7 @@ extern unsigned int __machine_arch_type;
> #define MACH_TYPE_COLIBRI_T30 4493
> #define MACH_TYPE_APALIS_T30 4513
> #define MACH_TYPE_OMAPL138_LCDK 2495
> +#define MACH_TYPE_DUCKBILL 4754
The file was still updated last year, but we preferred to set the
MACH_TYPE directly into the board configuration file, as this value is
used only once and only for legacy boards. Please set
#define CONFIG_MACH_TYPE 4754
in include/configs/duckbill.h
> +
> /*
> * These have not yet been registered
> */
> diff --git a/board/i2se/duckbill/Kconfig b/board/i2se/duckbill/Kconfig
> new file mode 100644
> index 0000000..98c1e46
> --- /dev/null
> +++ b/board/i2se/duckbill/Kconfig
> @@ -0,0 +1,15 @@
> +if TARGET_DUCKBILL
> +
> +config SYS_BOARD
> + default "duckbill"
> +
> +config SYS_VENDOR
> + default "i2se"
> +
> +config SYS_SOC
> + default "mxs"
> +
> +config SYS_CONFIG_NAME
> + default "duckbill"
> +
> +endif
> diff --git a/board/i2se/duckbill/MAINTAINERS b/board/i2se/duckbill/MAINTAINERS
> new file mode 100644
> index 0000000..5496baa
> --- /dev/null
> +++ b/board/i2se/duckbill/MAINTAINERS
> @@ -0,0 +1,6 @@
> +I2SE DUCKBILL BOARD
> +M: Michael Heimpold <mhei at heimpold.de>
> +S: Maintained
> +F: board/i2se/duckbill/
> +F: include/configs/duckbill.h
> +F: configs/duckbill_defconfig
Some files are missing, I presume.
> diff --git a/board/i2se/duckbill/Makefile b/board/i2se/duckbill/Makefile
> new file mode 100644
> index 0000000..b5577e3
> --- /dev/null
> +++ b/board/i2se/duckbill/Makefile
> @@ -0,0 +1,12 @@
> +#
> +# (C) Copyright 2014-2015
> +# Michael Heimpold, mhei at heimpold.de.
> +#
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +
> +ifndef CONFIG_SPL_BUILD
> +obj-y := duckbill.o
> +else
> +obj-y := iomux.o
> +endif
Well, it is okay if you want to maintain the name, but iomux is one of
the most used name for files. What about duckbill-iomux ?
> diff --git a/board/i2se/duckbill/duckbill.c b/board/i2se/duckbill/duckbill.c
> new file mode 100644
> index 0000000..0c80e42
> --- /dev/null
> +++ b/board/i2se/duckbill/duckbill.c
> @@ -0,0 +1,180 @@
> +/*
> + * I2SE Duckbill board
> + *
> + * (C) Copyright 2014-2015 Michael Heimpold <mhei at heimpold.de>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <asm/gpio.h>
> +#include <asm/io.h>
> +#include <asm/arch/imx-regs.h>
> +#include <asm/arch/iomux-mx28.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/sys_proto.h>
> +#include <fdt_support.h>
> +#include <linux/mii.h>
> +#include <miiphy.h>
> +#include <netdev.h>
> +#include <errno.h>
> +#include <fuse.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +static u32 system_rev;
> +static u32 serialno;
> +
> +/*
> + * Functions
> + */
> +int board_early_init_f(void)
> +{
> + /* IO0 clock at 480MHz */
> + mxs_set_ioclk(MXC_IOCLK0, 480000);
> + /* IO1 clock at 480MHz */
> + mxs_set_ioclk(MXC_IOCLK1, 480000);
> +
> + /* SSP0 clock at 96MHz */
> + mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
> +
> + return 0;
> +}
> +
> +int dram_init(void)
> +{
> + return mxs_dram_init();
> +}
> +
> +int board_init(void)
> +{
> + /* Adress of boot parameters */
> + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_CMD_MMC
> +int board_mmc_init(bd_t *bis)
> +{
> + return mxsmmc_initialize(bis, 0, NULL, NULL);
> +}
> +#endif
> +
> +#ifdef CONFIG_CMD_NET
> +int board_eth_init(bd_t *bis)
> +{
> + unsigned int reset_gpio;
> + int ret;
> +
> + ret = cpu_eth_init(bis);
> +
> + if (system_rev == 1)
> + reset_gpio = MX28_PAD_SSP0_DATA7__GPIO_2_7;
> + else
> + reset_gpio = MX28_PAD_GPMI_ALE__GPIO_0_26;
We use a static variable (system_rev) on a lot of boards in the past,
but does it matter to call again gpio_get ? Using a static variable
creates a dependency in the order the functions must be called, and for
this small thing it is frankly unneeded.
> +
> + /* Reset PHY */
> + gpio_direction_output(reset_gpio, 0);
> + udelay(200);
> + gpio_set_value(reset_gpio, 1);
> +
> + /* give PHY some time to get out of the reset */
> + udelay(10000);
> +
> + ret = fecmxc_initialize(bis);
> + if (ret) {
> + puts("FEC MXS: Unable to init FEC\n");
> + return ret;
> + }
> +
> + return ret;
> +}
> +
> +void mx28_adjust_mac(int dev_id, unsigned char *mac)
> +{
> + mac[0] = 0x00;
> + mac[1] = 0x01;
> + mac[2] = 0x87;
> +}
> +#endif
> +
> +#ifdef CONFIG_OF_BOARD_SETUP
> +int ft_board_setup(void *blob, bd_t *bd)
> +{
> + uint8_t enetaddr[6];
> + u32 mac = 0;
> +
> + enetaddr[0] = 0x00;
> + enetaddr[1] = 0x01;
> + enetaddr[2] = 0x87;
> +
+
Factorize this and xreate your own function to set the vendor-id of the
MAC without duplicating it.
> +#ifdef CONFIG_MXS_OCOTP
> + /* only Duckbill SPI has a MAC for the QCA7k */
Comment does not help - it looks like you need SPI to have a MAC in the
fuse, the two things are orthogonal.
> + fuse_read(0, 1, &mac);
> +#endif
> +
> + if (mac != 0) {
> + enetaddr[3] = (mac >> 16) & 0xff;
> + enetaddr[4] = (mac >> 8) & 0xff;
> + enetaddr[5] = mac & 0xff;
> +
> + fdt_find_and_setprop(blob,
> + "/apb at 80000000/apbh at 80000000/ssp at 80014000/ethernet at 0",
> + "local-mac-address", enetaddr, 6, 1);
> + }
> +
> + return 0;
> +}
> +#endif
> +
> +#ifdef CONFIG_REVISION_TAG
> +u32 get_board_rev(void)
> +{
> + return system_rev;
> +}
> +#endif
> +
> +#ifdef CONFIG_SERIAL_TAG
> +void get_board_serial(struct tag_serialnr *serialnr)
> +{
> + serialnr->low = serialno;
> + serialnr->high = 0;
> +}
> +#endif
> +
> +int misc_init_r(void)
> +{
> + unsigned int led_red_gpio;
> + char *s;
> +
> + /* Board revision detection */
> + gpio_direction_input(MX28_PAD_LCD_D17__GPIO_1_17);
> +
> + /* MX28_PAD_LCD_D17__GPIO_1_17: v1 = pull-down, v2 = pull-up */
> + system_rev =
> + gpio_get_value(MX28_PAD_LCD_D17__GPIO_1_17);
> + system_rev += 1;
> +
> + /* enable red LED to indicate a running bootloader */
> + if (system_rev == 1)
> + led_red_gpio = MX28_PAD_AUART1_RX__GPIO_3_4;
> + else
> + led_red_gpio = MX28_PAD_SAIF0_LRCLK__GPIO_3_21;
> + gpio_direction_output(led_red_gpio, 1);
> +
> + if (system_rev == 1)
> + puts("Board: I2SE Duckbill\n");
> + else
> + puts("Board: I2SE Duckbill 2\n");
> +
> + serialno = getenv_ulong("serial#", 10, 0);
> + s = getenv("serial#");
> + if (s && s[0]) {
> + puts("Serial: ");
> + puts(s);
> + putc('\n');
> + }
> +
> + return 0;
> +}
> diff --git a/board/i2se/duckbill/iomux.c b/board/i2se/duckbill/iomux.c
> new file mode 100644
> index 0000000..45f930c
> --- /dev/null
> +++ b/board/i2se/duckbill/iomux.c
> @@ -0,0 +1,162 @@
> +/*
> + * I2SE Duckbill IOMUX setup
> + *
> + * Copyright (C) 2013-2015 Michael Heimpold <mhei at heimpold.de>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <config.h>
> +#include <asm/io.h>
> +#include <asm/gpio.h>
> +#include <asm/arch/iomux-mx28.h>
> +#include <asm/arch/imx-regs.h>
> +#include <asm/arch/sys_proto.h>
> +
> +#define MUX_CONFIG_SSP0 (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
> +#define MUX_CONFIG_ENET (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
> +#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
> +
> +/* For all revisions */
> +const iomux_cfg_t iomux_setup[] = {
> + /* DUART */
> + MX28_PAD_PWM0__DUART_RX,
> + MX28_PAD_PWM1__DUART_TX,
> +
> + /* eMMC (v2) or SD card (v1) */
> + MX28_PAD_SSP0_DATA0__SSP0_D0 | MUX_CONFIG_SSP0,
> + MX28_PAD_SSP0_DATA1__SSP0_D1 | MUX_CONFIG_SSP0,
> + MX28_PAD_SSP0_DATA2__SSP0_D2 | MUX_CONFIG_SSP0,
> + MX28_PAD_SSP0_DATA3__SSP0_D3 | MUX_CONFIG_SSP0,
> + MX28_PAD_SSP0_CMD__SSP0_CMD | MUX_CONFIG_SSP0,
> + MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
> + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
> + MX28_PAD_SSP0_SCK__SSP0_SCK |
> + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
> +
> + /* Ethernet */
> + MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET,
> + MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET,
> + MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MUX_CONFIG_ENET,
> + MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MUX_CONFIG_ENET,
> + MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MUX_CONFIG_ENET,
> + MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MUX_CONFIG_ENET,
> + MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MUX_CONFIG_ENET,
> + MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MUX_CONFIG_ENET,
> + MX28_PAD_ENET_CLK__CLKCTRL_ENET | MUX_CONFIG_ENET,
> +
> + /* EMI */
> + MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_ODT1__EMI_ODT1 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI,
> +
> + MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A13__EMI_ADDR13 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_A14__EMI_ADDR14 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI,
> + MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
> +
> + /* Revision pin(s) */
> + MX28_PAD_LCD_D17__GPIO_1_17,
> +};
> +
> +/* For revision 1 only */
> +const iomux_cfg_t iomux_setup_v1[] = {
> + /* PHY reset */
> + MX28_PAD_SSP0_DATA7__GPIO_2_7 |
> + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
> +
> + /* LEDs */
> + MX28_PAD_AUART1_RX__GPIO_3_4,
> + MX28_PAD_AUART1_TX__GPIO_3_5,
> +};
> +
> +/* For revision 2 only */
> +const iomux_cfg_t iomux_setup_v2[] = {
> + /* eMMC (v2) */
> + MX28_PAD_SSP0_DATA4__SSP0_D4 | MUX_CONFIG_SSP0,
> + MX28_PAD_SSP0_DATA5__SSP0_D5 | MUX_CONFIG_SSP0,
> + MX28_PAD_SSP0_DATA6__SSP0_D6 | MUX_CONFIG_SSP0,
> + MX28_PAD_SSP0_DATA7__SSP0_D7 | MUX_CONFIG_SSP0,
> +
> + /* PHY reset */
> + MX28_PAD_GPMI_ALE__GPIO_0_26 |
> + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
> +
> + /* LEDs */
> + MX28_PAD_SAIF0_LRCLK__GPIO_3_21,
> + MX28_PAD_SAIF0_MCLK__GPIO_3_20,
> +};
> +
> +#define HW_DRAM_CTL29 (0x74 >> 2)
> +#define CS_MAP 0xf
> +#define COLUMN_SIZE 0x2
> +#define ADDR_PINS 0x1
> +#define APREBIT 0xa
> +
> +#define HW_DRAM_CTL29_CONFIG (CS_MAP << 24 | COLUMN_SIZE << 16 | \
> + ADDR_PINS << 8 | APREBIT)
> +
> +void mxs_adjust_memory_params(uint32_t *dram_vals)
> +{
> + dram_vals[HW_DRAM_CTL29] = HW_DRAM_CTL29_CONFIG;
> +}
> +
> +void mxs_power_setup_dcdc_clocksource(void)
> +{
> + mxs_power_switch_dcdc_clocksource(POWER_MISC_FREQSEL_20MHZ);
> +}
> +
> +void board_init_ll(const uint32_t arg, const uint32_t *resptr)
> +{
> + mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup));
> +
> + gpio_direction_input(MX28_PAD_LCD_D17__GPIO_1_17);
> +
> + if (gpio_get_value(MX28_PAD_LCD_D17__GPIO_1_17))
> + mxs_iomux_setup_multiple_pads(iomux_setup_v2, ARRAY_SIZE(iomux_setup_v2));
> + else
> + mxs_iomux_setup_multiple_pads(iomux_setup_v1, ARRAY_SIZE(iomux_setup_v1));
> +}
> diff --git a/configs/duckbill_defconfig b/configs/duckbill_defconfig
> new file mode 100644
> index 0000000..1971983
> --- /dev/null
> +++ b/configs/duckbill_defconfig
> @@ -0,0 +1,8 @@
> +CONFIG_ARM=y
> +CONFIG_TARGET_DUCKBILL=y
> +CONFIG_SPL=y
> +# CONFIG_CMD_IMLS is not set
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_SPI_FLASH is not set
> +# CONFIG_CMD_FPGA is not set
> +CONFIG_CMD_PING=y
> diff --git a/include/configs/duckbill.h b/include/configs/duckbill.h
> new file mode 100644
> index 0000000..fa70f29
> --- /dev/null
> +++ b/include/configs/duckbill.h
> @@ -0,0 +1,216 @@
> +/*
> + * Copyright (C) 2014-2015 Michael Heimpold <mhei at heimpold.de>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +#ifndef __CONFIGS_DUCKBILL_H__
> +#define __CONFIGS_DUCKBILL_H__
> +
There is a common include/configs/mxs.s. It can help to clean up this
file. Use it.
> +/* System configurations */
> +#define CONFIG_MX28 /* i.MX28 SoC */
> +#define CONFIG_MACH_TYPE MACH_TYPE_DUCKBILL
> +
> +#define CONFIG_MISC_INIT_R
> +
> +#define CONFIG_SYS_MXS_VDD5V_ONLY
> +
> +/* U-Boot Commands */
> +#define CONFIG_SYS_NO_FLASH
> +#define CONFIG_DISPLAY_CPUINFO
> +#define CONFIG_DOS_PARTITION
> +
> +#define CONFIG_CMD_BOOTZ
> +#define CONFIG_CMD_CACHE
> +#define CONFIG_CMD_DHCP
> +#define CONFIG_CMD_EXT4
> +#define CONFIG_CMD_EXT4_WRITE
> +#define CONFIG_CMD_FAT
> +#define CONFIG_CMD_FUSE
> +#define CONFIG_CMD_GPIO
> +#define CONFIG_CMD_I2C
> +#define CONFIG_CMD_MII
> +#define CONFIG_CMD_MMC
> +#define CONFIG_CMD_SPI
> +#define CONFIG_CMD_UNZIP
> +
> +/* Memory configuration */
> +#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
> +#define PHYS_SDRAM_1 0x40000000 /* Base address */
> +#define PHYS_SDRAM_1_SIZE 0x40000000 /* Max 1 GB RAM */
> +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
> +
> +/* Environment is in MMC */
> +#define CONFIG_ENV_OVERWRITE
> +#define CONFIG_ENV_IS_IN_MMC 1
> +#define CONFIG_ENV_SIZE (128 * 1024)
> +#define CONFIG_ENV_OFFSET (128 * 1024)
> +#define CONFIG_ENV_OFFSET_REDUND (256 * 1024)
> +#define CONFIG_SYS_MMC_ENV_DEV 0
> +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
> +
> +/* FEC Ethernet on SoC */
> +#ifdef CONFIG_CMD_NET
> +#define CONFIG_FEC_MXC
> +#define CONFIG_NET_MULTI
> +#define CONFIG_MX28_FEC_MAC_IN_OCOTP
> +#define CONFIG_FEC_MXC_PHYADDR 1
> +#define IMX_FEC_BASE MXS_ENET0_BASE
> +#endif
> +
> +#define CONFIG_IPADDR 192.168.1.10
> +#define CONFIG_SERVERIP 192.168.1.1
> +#define CONFIG_NETMASK 255.255.255.0
> +#define CONFIG_GATEWAYIP 192.168.1.254
No IP addresses flow into mainline - please remove them.
> +
> +/* BOOTP options */
> +#define CONFIG_BOOTP_SUBNETMASK
> +#define CONFIG_BOOTP_GATEWAY
> +#define CONFIG_BOOTP_HOSTNAME
> +
> +/* SPI */
> +#ifdef CONFIG_CMD_SPI
> +#define CONFIG_DEFAULT_SPI_BUS 2
> +#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0
> +#endif
> +
> +/* Boot Linux */
> +#define CONFIG_BOOTDELAY 1
> +#define CONFIG_BOOTFILE "zImage"
> +#define CONFIG_LOADADDR 0x42000000
> +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
> +#define CONFIG_REVISION_TAG
> +#define CONFIG_SERIAL_TAG
> +#define CONFIG_OF_BOARD_SETUP
> +#define CONFIG_BOOT_RETRY_TIME 120 /* retry autoboot after 120 seconds */
> +#define CONFIG_BOOT_RETRY_TIME_MIN 1 /* can go down to 1 second */
> +#define CONFIG_AUTOBOOT_KEYED
> +#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, " \
> + "press <c> to stop\n"
> +#define CONFIG_AUTOBOOT_DELAY_STR "\x63" /* allows retry after retry time */
> +#define CONFIG_AUTOBOOT_STOP_STR " " /* stop autoboot with <Space> */
> +#define CONFIG_RESET_TO_RETRY /* reset board to retry booting */
> +
> +/* Extra Environment */
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + "mmc_part2_offset=1000\0" \
> + "mmc_part3_offset=19000\0" \
> + "update_openwrt_firmware_filename=openwrt-mxs-root.ext4\0" \
> + "update_openwrt_firmware=" \
> + "if mmc rescan; then " \
> + "if tftp ${update_openwrt_firmware_filename}; then " \
> + "setexpr fw_sz ${filesize} + 1ff; " \
> + "setexpr fw_sz ${fw_sz} / 200; " \
> + "mmc write ${loadaddr} ${mmc_part2_offset} ${fw_sz}; " \
> + "mmc write ${loadaddr} ${mmc_part3_offset} ${fw_sz}; " \
> + "fi; " \
> + "fi\0" \
> + "update_fw_filename_prefix=emmc.img.\0" \
> + "update_fw_filename_suffix=.gz\0" \
> + "update_fw_parts=0x6\0" \
> + "update_fw_fsize_uncompressed=4000000\0" \
> + "gzwrite_wbuf=100000\0" \
> + "update_emmc_firmware=" \
> + "setexpr i ${update_fw_parts}; setexpr error 0; " \
> + "while itest ${i} -gt 0; do " \
> + "echo Transfering firmware image part ${i} of ${update_fw_parts}; " \
> + "if itest ${i} -le 9; then " \
> + "setenv j 0${i}; " \
> + "else " \
> + "setenv j ${i}; " \
> + "fi; " \
> + "if tftp ${loadaddr} ${update_fw_basedir}${update_fw_filename_prefix}${j}${update_fw_filename_suffix}; then " \
> + "setexpr k ${i} - 1; " \
> + "setexpr offset ${update_fw_fsize_uncompressed} * ${k}; " \
> + "if gzwrite mmc ${mmcdev} ${loadaddr} ${filesize} ${gzwrite_wbuf} ${offset}; then " \
> + "setexpr i ${i} - 1; " \
> + "else " \
> + "setexpr i 0; " \
> + "setexpr error 1; " \
> + "fi; " \
> + "else " \
> + "setexpr i 0; " \
> + "setexpr error 1; " \
> + "fi; " \
> + "done; setenv i; setenv j; setenv k; setenv fsize; setenv filesize; setenv offset; " \
> + "if test ${error} -eq 1; then " \
> + "echo Firmware Update FAILED; " \
> + "else " \
> + "echo Firmware Update OK; " \
> + "fi; setenv error\0" \
> + "erase_mmc=mmc erase 0 2\0" \
> + "erase_env1=mmc erase 100 100\0" \
> + "erase_env2=mmc erase 200 100\0" \
> + "image=zImage\0" \
> + "console=ttyAMA0\0" \
> + "fdt_file=imx28-duckbill-2.dtb\0" \
> + "fdt_addr=0x41000000\0" \
> + "boot_fdt=try\0" \
> + "ip_dyn=yes\0" \
> + "bootsys=1\0" \
> + "mmcdev=0\0" \
> + "mmcpart=2\0" \
> + "mmcroot=/dev/mmcblk0p2\0" \
> + "mmcargs=setenv bootargs console=${console},${baudrate} " \
> + "root=${mmcroot} " \
> + "rootwait bootsys=${bootsys} panic=1\0" \
> + "loadimage=ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} /boot/${image}\0" \
> + "loadfdt=ext4load mmc ${mmcdev}:${mmcpart} ${fdt_addr} /boot/${fdt_file}\0" \
> + "mmcboot=echo Booting from mmc ...; " \
> + "setexpr mmcpart 1 + ${bootsys}; " \
> + "setenv mmcroot /dev/mmcblk0p${mmcpart}; " \
> + "run mmcargs; " \
> + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
> + "if run loadfdt; then " \
> + "bootz ${loadaddr} - ${fdt_addr}; " \
> + "else " \
> + "if test ${boot_fdt} = try; then " \
> + "bootz; " \
> + "else " \
> + "echo WARN: Cannot load the DT; " \
> + "fi; " \
> + "fi; " \
> + "else " \
> + "bootz; " \
> + "fi\0" \
> + "nfsroot=/\0" \
> + "netargs=setenv bootargs console=${console},${baudrate} " \
> + "root=/dev/nfs " \
> + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
> + "netboot=echo Booting from net ...; " \
> + "run netargs; " \
> + "if test ${ip_dyn} = yes; then " \
> + "setenv get_cmd dhcp; " \
> + "else " \
> + "setenv get_cmd tftp; " \
> + "fi; " \
> + "${get_cmd} ${image}; " \
> + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
> + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
> + "bootz ${loadaddr} - ${fdt_addr}; " \
> + "else " \
> + "if test ${boot_fdt} = try; then " \
> + "bootz; " \
> + "else " \
> + "echo WARN: Cannot load the DT; " \
> + "fi;" \
> + "fi; " \
> + "else " \
> + "bootz; " \
> + "fi\0"
> +
> +#define CONFIG_BOOTCOMMAND \
> + "mmc dev ${mmcdev}; " \
> + "if mmc rescan; then " \
> + "if run loadimage; then " \
> + "run mmcboot; " \
> + "else " \
> + "run netboot; " \
> + "fi; " \
> + "else " \
> + "run netboot; " \
> + "fi"
> +
Are you unhappy with distro_bootcmd ? Can you check if it can fullfill
your requirements ?
> +/* The rest of the configuration is shared */
> +#include <configs/mxs.h>
> +
> +#endif /* __CONFIGS_DUCKBILL_H__ */
>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list