[U-Boot] [PATCH v2 10/13] drivers: gpio: add driver for Microchip PIC32 GPIO controller.
Daniel Schwierzeck
daniel.schwierzeck at gmail.com
Tue Jan 5 21:43:22 CET 2016
2016-01-04 15:01 GMT+01:00 Purna Chandra Mandal <purna.mandal at microchip.com>:
> PIC32 has ten independently programmable ports and each with multiple pins.
> These pins can be configured and used as GPIO, if not use by any other
> peripherals.
>
> Signed-off-by: Purna Chandra Mandal <purna.mandal at microchip.com>
> ---
>
> Changes in v2: None
>
> drivers/gpio/Kconfig | 7 ++
> drivers/gpio/Makefile | 2 +-
> drivers/gpio/pic32_gpio.c | 164 ++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 172 insertions(+), 1 deletion(-)
> create mode 100644 drivers/gpio/pic32_gpio.c
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index e60e9fd..13e9a6a 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -83,4 +83,11 @@ config VYBRID_GPIO
> help
> Say yes here to support Vybrid vf610 GPIOs.
>
> +config PIC32_GPIO
> + bool "Microchip PIC32 GPIO driver"
> + depends on DM_GPIO
> + default y if MACH_PIC32
> + help
> + Say yes here to support Microchip PIC32 GPIOs.
> +
> endmenu
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index fb4fd25..845a6d4 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -46,4 +46,4 @@ obj-$(CONFIG_STM32_GPIO) += stm32_gpio.o
> obj-$(CONFIG_ZYNQ_GPIO) += zynq_gpio.o
> obj-$(CONFIG_VYBRID_GPIO) += vybrid_gpio.o
> obj-$(CONFIG_HIKEY_GPIO) += hi6220_gpio.o
> -
> +obj-$(CONFIG_PIC32_GPIO) += pic32_gpio.o
> diff --git a/drivers/gpio/pic32_gpio.c b/drivers/gpio/pic32_gpio.c
> new file mode 100644
> index 0000000..69e3620
> --- /dev/null
> +++ b/drivers/gpio/pic32_gpio.c
> @@ -0,0 +1,164 @@
> +/*
> + * Copyright (c) 2015 Microchip Technology Inc
> + * Purna Chandra Mandal <purna.mandal at microchip.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <dm.h>
> +#include <errno.h>
> +#include <malloc.h>
> +#include <asm/io.h>
> +#include <asm/gpio.h>
> +#include <linux/compat.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <mach/pic32.h>
> +
> +/* Peripheral Pin Control */
> +struct pic32_gpio_regs {
> + struct pic32_reg_atomic ansel;
> + struct pic32_reg_atomic tris;
> + struct pic32_reg_atomic port;
> + struct pic32_reg_atomic lat;
> + struct pic32_reg_atomic open_drain;
> + struct pic32_reg_atomic cnpu;
> + struct pic32_reg_atomic cnpd;
> + struct pic32_reg_atomic cncon;
> +};
> +
> +enum {
> + MICROCHIP_GPIO_DIR_OUT,
> + MICROCHIP_GPIO_DIR_IN,
> + MICROCHIP_GPIOS_PER_BANK = 16,
> +};
> +
> +struct pic32_gpio_priv {
> + struct pic32_gpio_regs *regs;
> + char name[2];
> +};
> +
> +static int pic32_gpio_get_value(struct udevice *dev, unsigned offset)
> +{
> + struct pic32_gpio_priv *priv = dev_get_priv(dev);
> +
> + return !!(readl(&priv->regs->port.raw) & BIT(offset));
> +}
> +
> +static int pic32_gpio_set_value(struct udevice *dev, unsigned offset,
> + int value)
> +{
> + struct pic32_gpio_priv *priv = dev_get_priv(dev);
> + int mask = BIT(offset);
> +
> + if (value)
> + writel(mask, &priv->regs->port.set);
> + else
> + writel(mask, &priv->regs->port.clr);
> +
> + return 0;
> +}
> +
> +static int pic32_gpio_direction(struct udevice *dev, unsigned offset)
> +{
> + struct pic32_gpio_priv *priv = dev_get_priv(dev);
> +
> + if (readl(&priv->regs->ansel.raw) & BIT(offset))
> + return -1;
> +
> + if (readl(&priv->regs->tris.raw) & BIT(offset))
> + return MICROCHIP_GPIO_DIR_IN;
> + else
> + return MICROCHIP_GPIO_DIR_OUT;
> +}
> +
> +static int pic32_gpio_direction_input(struct udevice *dev, unsigned offset)
> +{
> + struct pic32_gpio_priv *priv = dev_get_priv(dev);
> + int mask = BIT(offset);
> +
> + writel(mask, &priv->regs->ansel.clr);
> + writel(mask, &priv->regs->tris.set);
> +
> + return 0;
> +}
> +
> +static int pic32_gpio_direction_output(struct udevice *dev,
> + unsigned offset, int value)
> +{
> + struct pic32_gpio_priv *priv = dev_get_priv(dev);
> + int mask = BIT(offset);
> +
> + writel(mask, &priv->regs->ansel.clr);
> + writel(mask, &priv->regs->tris.clr);
> +
> + pic32_gpio_set_value(dev, offset, value);
> + return 0;
> +}
> +
> +static int pic32_gpio_xlate(struct udevice *dev, struct gpio_desc *desc,
> + struct fdtdec_phandle_args *args)
> +{
> + desc->offset = args->args[0];
> + desc->flags = args->args[1] & GPIO_ACTIVE_LOW ? GPIOD_ACTIVE_LOW : 0;
> +
> + return 0;
> +}
> +
> +static int pic32_gpio_probe(struct udevice *dev)
> +{
> + struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
> + struct pic32_gpio_priv *priv = dev_get_priv(dev);
> + char *end;
> + int bank;
> +
> + priv->regs = pic32_ioremap(dev_get_addr(dev));
split this code and check the return value of dev_get_addr for
FDT_ADDR_T_NONE like you did in your other drivers.
> + uc_priv->gpio_count = MICROCHIP_GPIOS_PER_BANK;
> + end = strrchr(dev->name, '@');
> + bank = trailing_strtoln(dev->name, end);
> + priv->name[0] = 'A' + bank;
> + uc_priv->bank_name = priv->name;
> +
> + return 0;
> +}
> +
> +static int pic32_gpio_get_function(struct udevice *dev, unsigned offset)
> +{
> + int ret = GPIOF_UNUSED;
> +
> + switch (pic32_gpio_direction(dev, offset)) {
> + case MICROCHIP_GPIO_DIR_OUT:
> + ret = GPIOF_OUTPUT;
> + break;
> + case MICROCHIP_GPIO_DIR_IN:
> + ret = GPIOF_INPUT;
> + break;
> + default:
> + ret = GPIOF_UNUSED;
> + break;
> + }
> + return ret;
> +}
> +
> +static const struct dm_gpio_ops gpio_pic32_ops = {
> + .direction_input = pic32_gpio_direction_input,
> + .direction_output = pic32_gpio_direction_output,
> + .get_value = pic32_gpio_get_value,
> + .set_value = pic32_gpio_set_value,
> + .get_function = pic32_gpio_get_function,
> + .xlate = pic32_gpio_xlate,
> +};
> +
> +static const struct udevice_id pic32_gpio_ids[] = {
> + { .compatible = "microchip,pic32mzda-gpio" },
> + { }
> +};
> +
> +U_BOOT_DRIVER(gpio_pic32) = {
> + .name = "gpio_pic32",
> + .id = UCLASS_GPIO,
> + .of_match = pic32_gpio_ids,
> + .ops = &gpio_pic32_ops,
> + .probe = pic32_gpio_probe,
> + .priv_auto_alloc_size = sizeof(struct pic32_gpio_priv),
> +};
> --
> 1.8.3.1
>
>
--
- Daniel
More information about the U-Boot
mailing list