[U-Boot] [PATCH v2 10/13] drivers: gpio: add driver for Microchip PIC32 GPIO controller.

Purna Chandra Mandal purna.mandal at microchip.com
Wed Jan 6 11:17:09 CET 2016


On 01/06/2016 02:13 AM, Daniel Schwierzeck wrote:

> 2016-01-04 15:01 GMT+01:00 Purna Chandra Mandal <purna.mandal at microchip.com>:
>> PIC32 has ten independently programmable ports and each with multiple pins.
>> These pins can be configured and used as GPIO, if not use by any other
>> peripherals.
>>
>> Signed-off-by: Purna Chandra Mandal <purna.mandal at microchip.com>
>> ---
>>
>> Changes in v2: None
>>
>>  drivers/gpio/Kconfig      |   7 ++
>>  drivers/gpio/Makefile     |   2 +-
>>  drivers/gpio/pic32_gpio.c | 164 ++++++++++++++++++++++++++++++++++++++++++++++
>>  3 files changed, 172 insertions(+), 1 deletion(-)
>>  create mode 100644 drivers/gpio/pic32_gpio.c
>>
>> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
>> index e60e9fd..13e9a6a 100644
>> --- a/drivers/gpio/Kconfig
>> +++ b/drivers/gpio/Kconfig
>> @@ -83,4 +83,11 @@ config VYBRID_GPIO
>>         help
>>           Say yes here to support Vybrid vf610 GPIOs.
>>
>> +config PIC32_GPIO
>> +       bool "Microchip PIC32 GPIO driver"
>> +       depends on DM_GPIO
>> +       default y if MACH_PIC32
>> +       help
>> +         Say yes here to support Microchip PIC32 GPIOs.
>> +
>>  endmenu
>> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
>> index fb4fd25..845a6d4 100644
>> --- a/drivers/gpio/Makefile
>> +++ b/drivers/gpio/Makefile
>> @@ -46,4 +46,4 @@ obj-$(CONFIG_STM32_GPIO)      += stm32_gpio.o
>>  obj-$(CONFIG_ZYNQ_GPIO)                += zynq_gpio.o
>>  obj-$(CONFIG_VYBRID_GPIO)      += vybrid_gpio.o
>>  obj-$(CONFIG_HIKEY_GPIO)       += hi6220_gpio.o
>> -
>> +obj-$(CONFIG_PIC32_GPIO)       += pic32_gpio.o
>> diff --git a/drivers/gpio/pic32_gpio.c b/drivers/gpio/pic32_gpio.c
>> new file mode 100644
>> index 0000000..69e3620
>> --- /dev/null
>> +++ b/drivers/gpio/pic32_gpio.c
>> @@ -0,0 +1,164 @@
>> +/*
>> + * Copyright (c) 2015 Microchip Technology Inc
>> + * Purna Chandra Mandal <purna.mandal at microchip.com>
>> + *
>> + * SPDX-License-Identifier:    GPL-2.0+
>> + */
>> +
>> +#include <common.h>
>> +#include <dm.h>
>> +#include <errno.h>
>> +#include <malloc.h>
>> +#include <asm/io.h>
>> +#include <asm/gpio.h>
>> +#include <linux/compat.h>
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <mach/pic32.h>
>> +
>> +/* Peripheral Pin Control */
>> +struct pic32_gpio_regs {
>> +       struct pic32_reg_atomic ansel;
>> +       struct pic32_reg_atomic tris;
>> +       struct pic32_reg_atomic port;
>> +       struct pic32_reg_atomic lat;
>> +       struct pic32_reg_atomic open_drain;
>> +       struct pic32_reg_atomic cnpu;
>> +       struct pic32_reg_atomic cnpd;
>> +       struct pic32_reg_atomic cncon;
>> +};
>> +
>> +enum {
>> +       MICROCHIP_GPIO_DIR_OUT,
>> +       MICROCHIP_GPIO_DIR_IN,
>> +       MICROCHIP_GPIOS_PER_BANK = 16,
>> +};
>> +
>> +struct pic32_gpio_priv {
>> +       struct pic32_gpio_regs *regs;
>> +       char name[2];
>> +};
>> +
>> +static int pic32_gpio_get_value(struct udevice *dev, unsigned offset)
>> +{
>> +       struct pic32_gpio_priv *priv = dev_get_priv(dev);
>> +
>> +       return !!(readl(&priv->regs->port.raw) & BIT(offset));
>> +}
>> +
>> +static int pic32_gpio_set_value(struct udevice *dev, unsigned offset,
>> +                               int value)
>> +{
>> +       struct pic32_gpio_priv *priv = dev_get_priv(dev);
>> +       int mask = BIT(offset);
>> +
>> +       if (value)
>> +               writel(mask, &priv->regs->port.set);
>> +       else
>> +               writel(mask, &priv->regs->port.clr);
>> +
>> +       return 0;
>> +}
>> +
>> +static int pic32_gpio_direction(struct udevice *dev, unsigned offset)
>> +{
>> +       struct pic32_gpio_priv *priv = dev_get_priv(dev);
>> +
>> +       if (readl(&priv->regs->ansel.raw) & BIT(offset))
>> +               return -1;
>> +
>> +       if (readl(&priv->regs->tris.raw) & BIT(offset))
>> +               return MICROCHIP_GPIO_DIR_IN;
>> +       else
>> +               return MICROCHIP_GPIO_DIR_OUT;
>> +}
>> +
>> +static int pic32_gpio_direction_input(struct udevice *dev, unsigned offset)
>> +{
>> +       struct pic32_gpio_priv *priv = dev_get_priv(dev);
>> +       int mask = BIT(offset);
>> +
>> +       writel(mask, &priv->regs->ansel.clr);
>> +       writel(mask, &priv->regs->tris.set);
>> +
>> +       return 0;
>> +}
>> +
>> +static int pic32_gpio_direction_output(struct udevice *dev,
>> +                                      unsigned offset, int value)
>> +{
>> +       struct pic32_gpio_priv *priv = dev_get_priv(dev);
>> +       int mask = BIT(offset);
>> +
>> +       writel(mask, &priv->regs->ansel.clr);
>> +       writel(mask, &priv->regs->tris.clr);
>> +
>> +       pic32_gpio_set_value(dev, offset, value);
>> +       return 0;
>> +}
>> +
>> +static int pic32_gpio_xlate(struct udevice *dev, struct gpio_desc *desc,
>> +                           struct fdtdec_phandle_args *args)
>> +{
>> +       desc->offset = args->args[0];
>> +       desc->flags = args->args[1] & GPIO_ACTIVE_LOW ? GPIOD_ACTIVE_LOW : 0;
>> +
>> +       return 0;
>> +}
>> +
>> +static int pic32_gpio_probe(struct udevice *dev)
>> +{
>> +       struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
>> +       struct pic32_gpio_priv *priv = dev_get_priv(dev);
>> +       char *end;
>> +       int bank;
>> +
>> +       priv->regs = pic32_ioremap(dev_get_addr(dev));
> split this code and check the return value of dev_get_addr for
> FDT_ADDR_T_NONE like you did in your other drivers.

Ack, Will add sanity check.

>> +       uc_priv->gpio_count = MICROCHIP_GPIOS_PER_BANK;
>> +       end = strrchr(dev->name, '@');
>> +       bank = trailing_strtoln(dev->name, end);
>> +       priv->name[0] = 'A' + bank;
>> +       uc_priv->bank_name = priv->name;
>> +
>> +       return 0;
>> +}
>> +
>> +static int pic32_gpio_get_function(struct udevice *dev, unsigned offset)
>> +{
>> +       int ret = GPIOF_UNUSED;
>> +
>> +       switch (pic32_gpio_direction(dev, offset)) {
>> +       case MICROCHIP_GPIO_DIR_OUT:
>> +               ret = GPIOF_OUTPUT;
>> +               break;
>> +       case MICROCHIP_GPIO_DIR_IN:
>> +               ret = GPIOF_INPUT;
>> +               break;
>> +       default:
>> +               ret = GPIOF_UNUSED;
>> +               break;
>> +       }
>> +       return ret;
>> +}
>> +
>> +static const struct dm_gpio_ops gpio_pic32_ops = {
>> +       .direction_input        = pic32_gpio_direction_input,
>> +       .direction_output       = pic32_gpio_direction_output,
>> +       .get_value              = pic32_gpio_get_value,
>> +       .set_value              = pic32_gpio_set_value,
>> +       .get_function           = pic32_gpio_get_function,
>> +       .xlate                  = pic32_gpio_xlate,
>> +};
>> +
>> +static const struct udevice_id pic32_gpio_ids[] = {
>> +       { .compatible = "microchip,pic32mzda-gpio" },
>> +       { }
>> +};
>> +
>> +U_BOOT_DRIVER(gpio_pic32) = {
>> +       .name           = "gpio_pic32",
>> +       .id             = UCLASS_GPIO,
>> +       .of_match       = pic32_gpio_ids,
>> +       .ops            = &gpio_pic32_ops,
>> +       .probe          = pic32_gpio_probe,
>> +       .priv_auto_alloc_size   = sizeof(struct pic32_gpio_priv),
>> +};
>> --
>> 1.8.3.1
>>
>>
>
>



More information about the U-Boot mailing list