[U-Boot] [PATCH v5 2/2] usb: eth: add Realtek RTL8152B/RTL8153 DRIVER

[Marek Vasut]

On Saturday, January 23, 2016 at 07:55:58 PM, Anand Moon wrote:
> Hi Marek,
> 
> On 23 January 2016 at 20:53, Marek Vasut <marex at denx.de> wrote:
> > On Saturday, January 23, 2016 at 01:42:55 AM, Marek Vasut wrote:
> >> On Friday, January 22, 2016 at 09:41:33 PM, Joe Hershberger wrote:
> >> > Hi Marek,
> >> > 
> >> > On Fri, Jan 22, 2016 at 2:00 PM, Marek Vasut <marex at denx.de> wrote:
> >> > > On Friday, January 22, 2016 at 08:50:04 PM, Joe Hershberger wrote:
> >> > >> On Wed, Jan 20, 2016 at 12:24 AM, Ted Chen <tedchen at realtek.com> 
wrote:
> >> > >> > This patch adds driver support for the Realtek RTL8152B/RTL8153
> >> > >> > USB network adapters.
> >> > >> > 
> >> > >> > Signed-off-by: Ted Chen <tedchen at realtek.com>
> >> > >> > [swarren, fixed a few compiler warnings]
> >> > >> > [swarren, with permission, converted license header to SPDX]
> >> > >> > [swarren, removed printf() spew during probe()]
> >> > >> > Signed-off-by: Stephen Warren <swarren at nvidia.com>
> >> > >> > ---
> >> > >> > 
> >> > >> >  drivers/usb/eth/Makefile    |    1 +
> >> > >> >  drivers/usb/eth/r8152.c     | 1456
> >> > >> >  +++++++++++++++++++++++++++++++++++++++++++
> >> > >> >  drivers/usb/eth/r8152.h
> >> > >> >  
> >> > >> >  |  631 +++++++++++++++++++
> >> > >> >  
> >> > >> >  drivers/usb/eth/r8152_fw.c  |  980 +++++++++++++++++++++++++++++
> >> > >> >  drivers/usb/eth/usb_ether.c |    7 +
> >> > >> >  include/usb_ether.h         |    6 +
> >> > >> >  6 files changed, 3081 insertions(+)
> >> > >> >  create mode 100644 drivers/usb/eth/r8152.c
> >> > >> >  create mode 100644 drivers/usb/eth/r8152.h
> >> > >> >  create mode 100644 drivers/usb/eth/r8152_fw.c
> >> > >> > 
> >> > >> > Changes for v2: Modified by Marek's comments.
> >> > >> > - Remove pattern informations.
> >> > >> > - Don't allocate & free when read/write register.
> >> > >> > - relpace udelay to mdelay.
> >> > >> > - pull firmware into global variable.
> >> > >> > - code review.
> >> > >> > 
> >> > >> > Changes for v3: Modified by Marek's and Joe's comments.
> >> > >> > - Remove driver version informations.
> >> > >> > - separate firmware code to individual file.
> >> > >> > - split extensive defines to r8152.h.
> >> > >> > - code review.
> >> > >> > 
> >> > >> > Changes for v4: Modified by Marek's comments.
> >> > >> > - remove the redundant code in generic_ocp_read and
> >> > >> > generic_ocp_write. - remove redundant typecasting.
> >> > >> > - collect the codes of busy waiting to rtl8152_reinit_ll and
> >> > >> > rtl8152_nic_reset. - use ARRAY_SIZE() to avoid having 0x00 as a
> >> > >> > terminating entry of r8152_dongles. - using if (!ep_in_found &&
> >> > >> > (ep_addr & USB_DIR_IN)) ... to replace old version. - code
> >> > >> > review.
> >> > >> > 
> >> > >> > Changes for v5: Modified by Marek's comments.
> >> > >> > - add r8152_wait_for_bit to replace busy wait.
> >> > >> > - change the name of patch4 to r8152b_set_dq_desc.
> >> > >> > - add r8152_versions to store the hw's version.
> >> > >> 
> >> > >> Acked-by: Joe Hershberger <joe.hershberger at ni.com>
> >> > > 
> >> > > Do you want to pick this or shall I ?
> >> > 
> >> > If there is some dependency (patch 1) that you will take first, you
> >> > can just take this as well.
> >> 
> >> I cannot find patch 1/2.
> >> 
> >> Ted, can you repost both of the patches , so I can pick them ?
> > 
> > I applied 2/2 to u-boot-usb since it seems harmless, but I still don't
> > know what 1/2 is .
> > 
> > Best regards,
> 
> I probably belive this is the patch.
> 
> https://patchwork.ozlabs.org/patch/548453/

Thanks, in that case , please repost that one patch.