[U-Boot] [PATCH v5 2/2] usb: eth: add Realtek RTL8152B/RTL8153 DRIVER

[Ted]

Hi Marek, 

> -----Original Message-----
> From: Marek Vasut [mailto:marex at denx.de] 
> Sent: Sunday, January 24, 2016 3:38 AM
> To: Anand Moon
> Cc: Joe Hershberger; Ted; Stephen Warren; Joe Hershberger; u-boot
> Subject: Re: [U-Boot] [PATCH v5 2/2] usb: eth: add Realtek 
> RTL8152B/RTL8153 DRIVER
> 
> On Saturday, January 23, 2016 at 07:55:58 PM, Anand Moon wrote:
> > Hi Marek,
> > 
> > On 23 January 2016 at 20:53, Marek Vasut <marex at denx.de> wrote:
> > > On Saturday, January 23, 2016 at 01:42:55 AM, Marek Vasut wrote:
> > >> On Friday, January 22, 2016 at 09:41:33 PM, Joe 
> Hershberger wrote:
> > >> > Hi Marek,
> > >> > 
> > >> > On Fri, Jan 22, 2016 at 2:00 PM, Marek Vasut 
> <marex at denx.de> wrote:
> > >> > > On Friday, January 22, 2016 at 08:50:04 PM, Joe 
> Hershberger wrote:
> > >> > >> On Wed, Jan 20, 2016 at 12:24 AM, Ted Chen 
> > >> > >> <tedchen at realtek.com>
> wrote:
> > >> > >> > This patch adds driver support for the Realtek 
> > >> > >> > RTL8152B/RTL8153 USB network adapters.
> > >> > >> > 
> > >> > >> > Signed-off-by: Ted Chen <tedchen at realtek.com> 
> [swarren, 
> > >> > >> > fixed a few compiler warnings] [swarren, with permission, 
> > >> > >> > converted license header to SPDX] [swarren, 
> removed printf() 
> > >> > >> > spew during probe()]
> > >> > >> > Signed-off-by: Stephen Warren <swarren at nvidia.com>
> > >> > >> > ---
> > >> > >> > 
> > >> > >> >  drivers/usb/eth/Makefile    |    1 +
> > >> > >> >  drivers/usb/eth/r8152.c     | 1456
> > >> > >> >  +++++++++++++++++++++++++++++++++++++++++++
> > >> > >> >  drivers/usb/eth/r8152.h
> > >> > >> >  
> > >> > >> >  |  631 +++++++++++++++++++
> > >> > >> >  
> > >> > >> >  drivers/usb/eth/r8152_fw.c  |  980 
> +++++++++++++++++++++++++++++
> > >> > >> >  drivers/usb/eth/usb_ether.c |    7 +
> > >> > >> >  include/usb_ether.h         |    6 +
> > >> > >> >  6 files changed, 3081 insertions(+)  create mode 100644 
> > >> > >> > drivers/usb/eth/r8152.c  create mode 100644 
> > >> > >> > drivers/usb/eth/r8152.h  create mode 100644 
> > >> > >> > drivers/usb/eth/r8152_fw.c
> > >> > >> > 
> > >> > >> > Changes for v2: Modified by Marek's comments.
> > >> > >> > - Remove pattern informations.
> > >> > >> > - Don't allocate & free when read/write register.
> > >> > >> > - relpace udelay to mdelay.
> > >> > >> > - pull firmware into global variable.
> > >> > >> > - code review.
> > >> > >> > 
> > >> > >> > Changes for v3: Modified by Marek's and Joe's comments.
> > >> > >> > - Remove driver version informations.
> > >> > >> > - separate firmware code to individual file.
> > >> > >> > - split extensive defines to r8152.h.
> > >> > >> > - code review.
> > >> > >> > 
> > >> > >> > Changes for v4: Modified by Marek's comments.
> > >> > >> > - remove the redundant code in generic_ocp_read and 
> > >> > >> > generic_ocp_write. - remove redundant typecasting.
> > >> > >> > - collect the codes of busy waiting to 
> rtl8152_reinit_ll and 
> > >> > >> > rtl8152_nic_reset. - use ARRAY_SIZE() to avoid 
> having 0x00 
> > >> > >> > as a terminating entry of r8152_dongles. - using if 
> > >> > >> > (!ep_in_found && (ep_addr & USB_DIR_IN)) ... to 
> replace old 
> > >> > >> > version. - code review.
> > >> > >> > 
> > >> > >> > Changes for v5: Modified by Marek's comments.
> > >> > >> > - add r8152_wait_for_bit to replace busy wait.
> > >> > >> > - change the name of patch4 to r8152b_set_dq_desc.
> > >> > >> > - add r8152_versions to store the hw's version.
> > >> > >> 
> > >> > >> Acked-by: Joe Hershberger <joe.hershberger at ni.com>
> > >> > > 
> > >> > > Do you want to pick this or shall I ?
> > >> > 
> > >> > If there is some dependency (patch 1) that you will 
> take first, 
> > >> > you can just take this as well.
> > >> 
> > >> I cannot find patch 1/2.
> > >> 
> > >> Ted, can you repost both of the patches , so I can pick them ?
> > > 
> > > I applied 2/2 to u-boot-usb since it seems harmless, but I still 
> > > don't know what 1/2 is .
> > > 
> > > Best regards,
> > 
> > I probably belive this is the patch.
> > 
> > https://patchwork.ozlabs.org/patch/548453/
> 
> Thanks, in that case , please repost that one patch.

The patch 1/2 is there :
https://patchwork.ozlabs.org/patch/544360/

That patch is posted by "Stephen Warren".

Thanks~

BRs
Ted