[U-Boot] [PATCH 0/7] fdt: Replace u-boot-dtb.bin with u-boot.bin

Hans de Goede hdegoede at redhat.com
Thu Jan 28 09:25:45 CET 2016


Hi,

On 28-01-16 04:58, Simon Glass wrote:
> Hi Hans,
>
> On 25 January 2016 at 13:30, Simon Glass <sjg at chromium.org> wrote:
>>
>> At present u-boot.bin holds the plain U-Boot binary without the device tree.
>> This is somewhat annoying since you need either u-boot.bin or u-boot-dtb.bin
>> depending on whether device tree is used.
>>
>> This series adjusts the build such that u-boot.bin includes a device tree,
>> and the plain binary is in u-boot-nodtb.bin. For now u-boot-dtb.bin remains
>> the same.
>>
>> This should be acceptable since:
>>
>> - without OF_CONTROL, u-boot.bin still does not include a device tree
>> - with OF_CONTROL, u-boot-dtb.bin does not change
>>
>> The main impact is build systems which are set up to use u-boot.bin as
>> the output file and then add a device tree. These will have to change to use
>> u-boot-nodtb.bin instead.
>>
>> The original decision to use a separate u-boot-dtb.bin was aimed at allowing
>> any device tree file to be concatenated to the u-boot.bin image after the
>> build. However this no-longer seems so important. More important is the
>> convenience of using the same output file regardless of the setting for
>> OF_CONTROL.
>
> Do you have any comments on this series please?

I'm fine with this series, all normal sunxi use-cases use u-boot-sunxi-with-spl.bin
which is generated like this:

ifneq ($(CONFIG_SUNXI),)
OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \
                                    --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin \
                         u-boot$(if $(CONFIG_OF_CONTROL),-dtb,).img FORCE
         $(call if_changed,pad_cat)
endif

Which should stay working just fine, although it might be slightly
simplified after your patch to simply always use u-boot.img.

sunxi spl does not use a dtb, so nothing should change there.

Regards,

Hans


>
>>
>>
>> Simon Glass (7):
>>    tegra: Drop generation of -nodtb file with OF_CONTROL
>>    fdt: Build a U-Boot binary without device tree
>>    fdt: Build an SPL binary without device tree
>>    tegra: Always build a boot image with the same filename
>>    socfpga: Simplify Makefile filenames
>>    Makefile: Make u-boot.img the same as u-boot-dtb.img
>>    Makefile: Drop unnecessary -dtb suffixes
>>
>>   Makefile             | 67 ++++++++++++++++++++++++++--------------------------
>>   scripts/Makefile.spl | 26 +++++++++++++-------
>>   2 files changed, 50 insertions(+), 43 deletions(-)
>>
>> --
>> 2.7.0.rc3.207.g0ac5344
>>
>
> Regards,
> Simon
>


More information about the U-Boot mailing list